GE 863/EWS-T-19 OF 2020-21

Amount

Excavating over areas, n.exc 1.5 m deep and getting out in hard/dense soil complete all as specified & directed.

M & L for PCC 1:4:8 Type D-2 using 40mm graded stone aggregate as in foundation of retaining wall complete all as specified and directed.

M & L for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and directed.

M & L for precast PCC 1:3:6 type C1 using 20mm graded stone aggregate as in bond stone, set in cement mortar 1:6 complete all as specified and directed.

M & L for PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in coping to retaining wall/steps including necessary farmwork complete all as specified and directed.

M & L for Raised pointing to RR stone walling with cement mortar 1:3 complete all as specified and directed.

Returning filling in including spreading,leveling ,watering and well ramming in layers not exc 25 cm thick complete all as specified and directed.

Removing excavated soil n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and directed.

S & F PVC (SWR) pipe 110mm dia fixed in retaining wall as spout pipe complete all as specified & directed.

Extra over stone walling up to 40mm for hammer dressing to face stone and dressing of face, bed and joint as specified for random rubble walling uncourced complete all as specified & directed.

M & L for Loose filling with Broken stone of gauge 80 to 150 mm in back of retaining wall, etc complete all as specified & directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and directed.

M & L for non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, set over and incuding 15mm thick screed bed in cm (1:6) and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M &L 25 mm thick cement concrete type B-O, 1:2:4 (12.5mm graded agg) as in sub flooring.

M & L for machine cut kota stone slab flooring 20-25mm thick over 15mm thick cement screed base of CM 1:6 and laid and jointed with grey cement sluury mixed with pigment to match the shade of the slab complete all as specified and directed.

M&L hard core of broken sotne of guage n.exc 63mm, deposited spread and levelled in layers n.exc 15 cm thick watered and rammed to a true surfaces.

M & L 50mm thick PCC 1:3:6 Type C-I using 20mm crushed stone aggregate as in plinth protection and finished even and smooth without using extra cement complete all as specified and directed.

Taking down cement or cement lime plaster any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M & L for 15mm thick rendering on brick work or concrete surfaces in cement plaster 1:6 and finished even and smooth (without using extra cement) complete all as specified and directed.

M&L for two coats cement base paint on plastered surface including preparation of newly plastered surfaces complete all as specified and directed.

Taking down chowkats or frames (without taking off shutters form the frame) area exc 1.5 Sqm but n.exc 4.0 Sqm each.

Taking down chowkats or frames (without taking off shutters form the frame) area not exc 1.5 sqm complete all as specified and directed .

Taking down shutters (of any description) area exc 1 Sqm but n.exc 2.0 Sqm each.

S & F pressed steel frame size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc incl one coat of red oxide primer.

S & F pressed steel frame size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc incl one coat of red oxide primer.

M&L for Providing cement concrete type C-0 1:3:6 (12.5 mm graded stone agg) as in filling in pressed steel chowkhats complete all as specified & directed at site.

S & F 30mm thick flush shutter solid core construction, with block board core and plywood face panels, commercials type on both sides complete all as specified and directed.

S & F factory made 35mm thick second class hard wood Glazed and skelton door shutters, open rebated and prepare to receive glass, guage etc, size of members of shutters as specified and directed.

S & F Anodised aluminium frame including shutters for doors, windows & ventilators with one or more rebates inncluding joining cleat for fixing etc.

S & F 4.80mm thick sheet glass ordinary quality & glazing fixed with aluminium snap beading as in aluminium window and door shutter in area exc. 0.5 Sqm each pane.

S & F framed work such as framed guard bars, barred iron doors, grills, grantings etc with ends of bars shouldered or riveted framed guard bars and similar work confirming to Fe 290. Gde E-165 complete all as specified and directed.

M & L two coats of synthetic enamel painting on wooden surfaces not otherwise described over 10cm width or girth over a coat of pink primer including prepration of newly utreates surfaces complete all as specified and directed.

M & L two coats of synthetic enamel paint on steel surfaces of any discription over 10cm width or girth not otherwise described including one coat of red oxide primer after preparation complete all as specified and directed.

S & F 150mm aluminium, anodised, barrel tower bolts of extruded section and fixed.

S&F 250mm aluminium alloy anodised sliding bolts with hasp, staple and fixing clips of sheet, cast or extruded section fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed.

S&F Butt hings, 100mm medium weight, cold rolled mild steel.

S&F 125mm aluminium handles, cast type ,anodised and pattern/design as approved.

S&F galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm & fixed with tinned tacks or galvanised wire staples.

Hacking out old broken glass (any thickness , size, quality or description ) from metal frame including punching or drilling out old glazing pins.

S&F 3 mm thick sheet glass, ordinary quality and glazing with oil putty in squares n,exc 0.5 Sqm, each pane.

S&F in repair curtain rod made out of 25mm dia(outer dia) pipe having thickness 0.63mm , PVC coated and colour/pattern, over all dia 28 to 29 mm including brackets complete all as specified and directed.

Dismantling false ceiling boards any description and in any position incl frame work.

S&F anodised aluminium snap gride of size 600 X 600mm frame work for false ceiling complete all as specified and directed.

S&F hangers 6mm dia G I (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G I flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complet all as specified and directed.

M&L for Exposed metal frame ceiling with 8mm thick calcium silicate board of silicious and calcareous material reinforced with cellulose fibre for fixing in 600mmX600mm grid (frame work for ceiling shall be measured and paid seprately under respective item) complete all as specified and directed.

Dismantling fibre sheet in roof covering complete all as specified and directed.

S&F 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with screw complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting, any guage, thickness from roof covering complete all as specified.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

Dismantling wrought iron or mild steel work of any description not otherwise provided.

S&F Mild steel work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, Tee, angle channel or flat sections) including distance pieces, cleats etc.(Fe-410-W(Gde E-250)Quality-A) complete all as specified and directed.

M&L 60mm thick interlocking paver block with grey cement and no pigment of any size and shape confirming to IS 15658-2006, M-35 Grade as approved, laid in flooring and joints filled/broomed with fine sand & including sand filling 50 mm thick, under flooring or in foundations including waterinng & consolidation complete all as specified and directed.

M&L PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in bed plates, coping, kerbs, water trough and like incl. rounded or chamfered on edges.

Demolition of precast concrete block walling masonary, built in cement mortar or cement lime mortar incl all quoins, arches, pillars, etc but excluding ashlar facing, dressed stone work and precast concrete articles.

M&L 1:3:6 type C-2 precast cement concrete (20mm graded stone aggregate) block masonary with solid blocks exc 10 cm in width and not exc 20cm in width and setting in cement mortar 1:6.

M&L for washing rubbing down and applying of two coat cement base paint to old surfaces of walls complete all as specified and directed.

M&L for washing, rubbing down and stopping of distempered surface and applying one coat of oil bound distemper to old surfaces of walls complete all as specified and directed.

M&L one coats of synthetic enamal paint to old steel surfaces of any discription not otherwise described over 10cm width or girth including preparation of old surfaces complete all as sepcified and directed.

M&L for preparation of old surfaces and applying two coat of white wash complete all as specified and directed

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, fiitng such as switches, ceiling roses, pandents, regulators, sockets etc, removinh materials to store for taking credit (credit for above items should be made as per conditioned separately) and making good disturbed surface of walls, floors etc complete all as specified and directed by Engineer-in-Charge.

M&L for point wiring for one light fitting / one fan point controled by one switch with 1.5 Sq mm FRLS PVC insulated copper conductor cable 1100 volts grade drawing in and including PVC Casing/capping with 1.5 Sq mm FRLS PVC insulated copper conductor cable for continuous earth wire connected to main earth dolly with PVC gang box of any size complete for one light/fan point controlled by one switch complete all as specified and directed by Engineer in Charge.

All as per srl item 62 above but for one 5 pin 5 amps socket outlet on the independent board.

All as per item No 62 above but for one 3 pin 5 amps socket outlet on the same board with other switchs.

All as per item No 62 above but with 2.5 Sq mm cable for Independent bd one 3 pin 15 Amps socket outlet including S/C 2.5 Sq mm FRLS PVC insulated copper conductor unsheathed 1100 v grade cable for continuous earth wire connected to gang box of required size all as specified and directed by Engineer-in-Charge.

S&F switch piano 5 amps flush type single pole one way suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge.

S&F switch piano 15 amps flush type single pole one way suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge.

S&F socket outlet flush type 5 pin 6 amps suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge.

S&F socket outlet 2 in 1, 5 pin 15 amps flush type suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge.

Supply and fixing ceiling rose surface bakelite 65 X 50 mm 3 terminal suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge.

M&L for lamp holder, PVC/polycarbonate type with back plate suitable for 240 volt AC complete all as specified and directed by Engineer-in-Charge.

Supply & fix in replacement Fan Regulator Step type double moudle complete all as specified and directed by Engineer-in-charge.

Supply and fixing in replacement of wall mounted LED batten extruded aluminium heat shrink provided for efficient heat dissipation and integrated electronic driver ,20 watt LED fitting, 6000K , 230 Volts, diffused optics ,etc complete with all accessories , connecting up with twin core twisted flexible copper conductor cable from ceiling rose to fitting, fixed on two PVC round blocks and testing complete all as specified and directed by the Engineer-In- Charge. Make : Havells Cat Part No ENDURALINEARNEDBS20W LED 865SPCWH or equivalent Make as per Appx 'B' as approved.

Supply and fixing wall mounted LED bulk head fittings, 10 watt, warm white,, 230 Volts, diffused optics ,etc complete with all accessories , connecting up with twin core twisted flexible copper conductor cable from ceiling rose to fitting, and testing complete all as specified and directed by the Engr-in-charge.

Supply and fixing LED lamp 12 watt self ballasted retrofit CDL all as specifeid and directed by Engr-in-charge

S & F in replacement ceiling fan 1200 mm sweep 5 star rating 230 V single phase with all accessories including prpvision of MS hooks suitable for hanging ceiling fans and connecting upto ceiling rose 1.5 Sqmm flexible copper wire complete all as specified and directed by Engineer-in-charge. (Note :-Old ceiling fan shall be deposited to AGE E/M store yard all as directed at site.

Supply and fixing MCB distribution board with Bus bar 200A neutral link , earth bar made out of CRCA mild steel sheet surface mounting SPN 8 way 230 volts double door type regal gray horizontal type complete all as specified and as directed by Engineer-in-Charge. Make -Havells/indoa Optipro /Legrand /ABB / L & T Note :- MCB shall be measured and paid seperately.

S&F MCB 40 Amps SPN 10 KA Complete all as specified and directed by Engineer-in-Charge.

S&F MCB 6 to 32 Amps SP 10 KA Complete all as specified and directed by Engineer-in-Charge.

M&L for earthing complete with galvanised steel earth plate electrode 60x60x 6 mm thick, buried directly in ground (eath pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to galvanised iron wire 4.0 mm dia as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 4 connected to earthing test point all as specified or indicated including including funnel with wire mesh, PCC chamber, PCC cover 80 mm thick , GI watering pipe 20 mm dia, medium grade 15 mm dia GI protection pipe,light grade and adequate quantity of salt and charcoal testing on completion, complete with excavation and earth work and testing on completion. Note: GI earth wire upto 7.5 Mtr is deemed to be included in the quoted rate and beyond 7.5 mtr will be measured and paid seperately under relevant items.

Net Contract Sum will be after deducting Sch Of Credit of Rs. 8831.00

M/S PYARE LAL

R B TRADERS

PRITPAL SINGH