RequiredExperience with Government
RequiredAnnual Turnover
RequiredCertificate (Requested in ATC)
RequiredOEM Authorization Certificate
RequiredOEM Annual Turnover Bid to RA enabled No Digital Transreceiver-Handheld ( 99 pieces ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Bid Requirement (Allowed Values) PERFORMANCE FEATURES Frequency Range (MHz) 136-174 136-174 Types of Bandwidth VHF Full Band VHF Full Band Display No * 1/6 Channel Capacity 16 16
Required32 Channel Spacing 12.5 * Frequency Stability (± ) 0.5 * Technology Digital TDMA (2-slot) * Air Interface Standard Open Standard DMR Tier-II * Antenna Impedance 50 * TRANSMITTER RF Power output programmable * RF Power output Range 1 to 5 Watts (VHF) 1 to 5 Watts (VHF) FM Emission 11K0F3E
Required7K60FXE
Required7K6 0FXD
Required7K60FXW
Required7K60F1 W * Digital Modulation 4FSK * Transmitter FM Hum/Noise (dB) -40 * Transmitter Modulation Limiting +/- 2.5 KHz @12.5KHz * Transmitter Adjecent Channel Power (dBc) -60 * Audio Response +1
Required-3 dB * Audio Distortion 3 * Digital Vocoder AMBE+2 * RECEIVERS Analog Receivers Sensitivity for 12dB SINAD 0.3 * Digital Receiver Sensitivity at 5% BER 0.3 * Receiver Adjacent Channel Selectivity (dB) 70 * Inter Modulation (dB) 70 * Receiver Audio Output 500 * Receiver Rated Audio Distortion 3 * ACCESSORIES Antenna for Handheld Transreceiver Rugged flexible Helical * Programming kit yes * User Manual with each radio sets provided free of cost in soft as well as hard copy yes * Technical repairing & maintenance manual yes * 2/6 with complete block diagram
Requiredcircuit layout etc in soft as well as hard copy Battery Charger Yes * Input voltage 230 V ± 10%
Required50 Hz * Output voltage - * Battery charger suitable for Lithium-ion * Charging time for standard mode 6 to 14hrs * Charging time for rapid mode 1 tO 3 hrs * Number of charging pockets 1 * Number of spare batteries with each Radio Set NA * Indicator For all modes of charging status * One good quality leather case with belt clip & shoulder strip No * VARIOUS FEATURES Simple Press to talk YES * Low Battery Alert yes * CTCSS or DCS yes * Mixed Mode Operation (analog & digital) yes * Signaling 2Tone
Required5Tone
RequiredDTMF
RequiredDigi tal * Busy Channel Lockout Yes * Selective Call Decode Yes * Capable of VOX for hands-free operation Yes * If yes
Requiredhandfree kit provided with radio set No * handfree kit variants Ear plug * PTT ID Encode Yes * Channel Scanning with call quieting facility Yes * Emergency SOS/SIREN Yes * Talk-around Yes * Automatic Number Identification (ANI) No * 3/6 Text message and predefined message No * Keypad No * Availablity of Inbuilt GPS system No * If yes
RequiredHorizontal accuracy 0 * Time to first fix(TTFF) cold start 0 * Time to First Fix(TTFF) Hot start 0 * Capable of being Killed Unkilled No * communication security Inbuilt encryption
Required3rd party encryption
RequiredNA * Protocols supported in case of third party encryption - * GENERIC Weight of hand held Transreceiver with Battery 346 * Other features - * POWER SOURCE/BATTERY Chemistry of Battery Lithium-ion * Voltage rating of the Battery 7.5 * capacity of Battery (mAH) 2250 * Average Battery duty cycle '5/5/90 for digital Transmission 18.5 * Average Battery duty cycle '5/5/90 for analog Transmission 14.5 * CERTIFICATION BIS registartion under CRS of Meity for the battery Yes * BIS registration number and date for the battery - * EMI/EMC ETSI EN301 489-1 & ETSI EN301 489-5 * Tested by DCPW Yes * SAFETY Protections Reverse polarity protection & short circuit protection * SERVICE Warranty 2 2.0 4/6 OPERATING CONDITION Minimum Operating temperature -30 * Maximum Operating temperature 55 * Minimum Storage temparature -40 * Maximum Storage temperature 70 * Operating Humidity @40 degree C 95 * TEST REPORT DETAILS Dust test as per MIL-STD-810 F * Vibration test as per MIL-STD-810 G * Shock test as per MIL-STD-810 G * Water Intrusion test as per MIL-STD-810 F * Salt test as per MIL-STD-810 G * Rain test as per MIL-STD-810 G * Altitude test as per MIL-STD-810 G * Availability of Test Reports from Central Govt/NABL/ILAC acredited lab to prove confirmity to the Specifications Yes * Test Report Number and Date - * Name and Address of the Lab - * * Specifications highlighted in bold are the Golden Parameters. * Bidders may note that In respect of non-golden Parameters
Requiredthe specifications 'Values' chosen by Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer.
