Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹21.4 LAccepted-AOC PURULIA CHOWK BAZAR | COOCHBEHAR | COOCHBEHAR | WEST BENGAL | L1 | Accepted-AOC lowest | |
| 2 | L2₹21.6 L+₹28,361.26 (1.33%)Rejected-Finance GARIKHANA BARAKAR ROAD PURULIA P S PURULIA TOWN DIST PURULIA PIN 723101 | PURULIA | PURULIA | WEST BENGAL | 723101 | L2 | Rejected-Finance 2nd lowest | |
| 3 | L3₹21.8 L+₹44,607.88 (2.09%)Rejected-Finance SADARPARA P O PURULIA P S PURULIA TOWN DIST PURULIA PIN 723101 | PURULIA | PURULIA | WEST BENGAL | 723101 | L3 | Rejected-Finance 3rd lowest |
Tender Value
Refer Docs
EMD Value
₹46,000
Closing Date
12 Apr 2024, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
The Executive Engineer, PMD,PHE.Dte
Office of the Executive Engineer Purulia Mechanical Division,PHE.Dte Ranchi Road,Purulia.
Supply, delivery and installation of Centrifugal pumping machinery with other allied work at Lagda OHR Site of Augmentation of Lagada water supply scheme under Purulia Mechanical Division, PHE Dte.
2024_PHED_681655_28
22/ EE/PMD/PHED OF 2023-2024
Open Tender
MECHANICAL
Item Rate
120 days
Purulia
Please refer Tender documents.
5 documents required · 5 mandatory
₹46,000
Yes
30 Sept 2024
12 Mar 2024
15 Apr 2024
12 Mar 2024
12 Apr 2025
12 Mar 2024
Amount
Supply, delivery at site and storage of horizontal multistage centrifugal pump with common base plate for pump and motor, flexible coupling, coupling guard foundation bolts etc. as per IS :9137 & following specification. Pump efficiency should be greater than 70 % and RPM (Syn) should not be more than 1500. Casing -CI, Impeller-Bronze, Shaft-SS410, shaft sleev- SS410, Wear ring: Bronze, Suction- flooded type, (TC, GC & Curve Chart and MOC issued by manufacturer are to be submitted at the time of delivery) (Mateials should be supplied after taking approval from department) Capacity : 130 M³/Hr. Generated Head : 35 MWC. Suction/delivery nozzle size: 150mm/100mm.
Supply, delivery at site and storage of horizontal foot mounted TEFC squirrel cage induction motor of IE4 class suitable for above pump sets having adequate margin on BKW over the pump BKW and as per following specification. Power Supply: 415V+/-10%, 50HZ ± 6%, 3 Phase, Duty cycle-S1, Insulation- class F, IP55, Temp rise limited to class: B, Motor ( IS 325) should be efficiency class: IE4 . Motor power should be 15%-20% over the pump HP at duty point. Ambient temp: 50°C, Speed: 1500 rpm as sync, Method of Stating: Star delta stating, (TC, GC & Curve Chart and MOC issued by manufacturer are to be submitted at the time of delivery) (Mateials should be supplied after taking approval from department) Motor rating- 22 KW.
Supply, delivery at site and storage of following valves & pipes as per specification: (TC & MOC issued by manufacturer are to be submitted at the time of delivery) (Mateials should be supplied after taking approval from department)
Cast iron double flanged Non- Rising Spindle Sluice Valve generally confirming to IS 14846 having body door /dome/Bonnet and cover of cast Iron Gr FG 260, Spindle of IS 6603, Gr-12 cr-13, spindle nut & seat rings are of Gunmetal as per IS:318 LTB 2. Flanges flat faced and drilled to IS:1538 Part IV & VI, Valves are suitable for maximum working pressure of 10/16 kg/sqcm (seat test) and body tested to 15/24 kg/sqcm 350 NB and above valves should be provided with enclosed gear box and antifriction device for ease of operation. All the valves should be tested by closed end method only. PN 1.0 ratings. a) DN 200 mm (for Invididual pump suction line)
b)DN 150 mm (for common header delivery )
Cast iron double flanged single door swing non-return valve generally conforming to IS:5312 Part I, having body, door, cover in graded cast iron to IS:210 Gr.FG200, body and door rings & bearing block of leaded tin bronze to IS:318 Gr.LTB 2 (350mm & above), hinge pin of st.st.AISI410, valve suitable for a maximum working pressure of 10/16 kg/cm2 (Seat test) & body tested to 15/24 kg/Sqcm. PN 1.0 ratings. DN 150 mm (for Invididual pump delivery line)
MS dismantling joints with Rubber Compression Ring and adjustable follower flanged complete assembled unit with galvanized stud and nuts. PN 1.0 ratings. a) DN 200 mm (for Invididual pump suction line)
b) DN 150 mm (for Invididual pump delivery & common header line)
Supply, delivery at site and storage of MSERW Pipes as p er IS: 1239 (part I & II) for suction, delivery and common header lines ( PN 1.0 rating). a) DN 200 mm (for Suction line) 5.4 mm thickness.
b) DN 150 mm (for Delivery line and common header line) 5.4 mm thickness.
Supply, delivery at site and storage of bourdon type Gauges with 150 mm dia cast aluminium dial with SS internal Siphon Tubes, DN 15 mm GI Impulse line withThree Way Cock etc. a) Pressure Gauge ( 0 - 10 kg / sq.cm )
b) Compound Gauge ( + 1KSCG to -1 KSCG )
Supply, delivery at site and storage of 2mm thick CRCA sheet steel enclosed cubical type Indoor floor mounted 415V Power Distribution Board cum Motor Control Centre having required feeders, starters etc. as per Specification as follows : INCOMMER :- 160A/25KA TPN, 415V, Feeder with E/F relay MCCB adjustable OLR with thermo magnetic release for O/C, S/C, E/F & SPD protection with all accories . OUTGOING (with all protection): a) 22 kw star delta Feeder- 3nos (2+1 spares) b) 1.5 HP DOL Feeder (Chlorination) :-2 no. c) 1.5 HP DOL Feeder (D watering motor) :-2nos. d) 16 AMP/25KA TPN MCCB Feeder with timer (outdoor lighting)- 1no, e) 32AMP/25KA 4P MCCB (Spare)- 1no. h) 16 AMP, DP,MCB Feeder-1no, i) 16 AMP/25KA TPN MCCB Feeder with timer (indoor lighting)- 1no, , all protection & relay. Each individual feeder should consist of indicator lamp (LED), proper rating voltmeter & ammeter. All the components (major) - Siemens /ABB/Approved make of PHED.
100 Amp. 415V, 50 Hz 3P Triple Pole with Neutral Link With Rewireable Porcelein Fuse Units Main Switches. Make- PHE Approved make.
100 Amp. 4 way 415V Copper busbar chamber box by 16 SWG sheet steel enclosure including porcelain chair etc. with painting complete as per direction of the EIC.
1.1KV grade 35 sq.mm 3.5 core XLPE insulated Aluminium armoured cable conforming to IS 7098 (Part 1) 2011 with Up To Date Amendments.
Supply and delivery of 1.1KV grade 16 sq.mm 3 core XLPE insulated Aluminium armoured cable conforming to IS‐7098 (Part 1) 2011 with Up To Date Amendments. (Make: Approved Vendor list of PHED.)
Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below : 3½ core, upto 35 sqmm
3 core, upto 16 sqmm
Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials : 3½ core 35 sqmm cable
4 core 16 sqmm cable
Supply and delivery of De-watering pump with all equipments with automatic operation level controller float switch, cable, motor, pipe lines and accessories as per requirement. Power rating 0.70KW -1.1KW, outlet size 50mm, discharge capacity 250 LPM, Head-10m, supplying voltage 230V, single phase, 50Hz. (Make: Approved Vendor list of PHED.)
Installation of above supplied materials sl. no. with S & F all necessary Enlarger/Reducer and specials, gauges, including supply of all erection items, Proper allingment of high lift pumping machinery, pipe support, valve support, fabrication of suction line , delivery line and common delivery header, laying/drawing of power cables through cable tray (with necessary jointing materials, brass compensation glands) as required for completion of work as per relevant IE Rules and Hydraulic Standards with the entire satisfaction of EIC in compliance with approved departmental drawing and specification including labour charges and hire charges of Generator, welding set, fuel, lubricants etc. required for completion of work testing commissioning complete.
Supply, delivery at site and storage of safety equipment like 3 kgs. fire extinguishers IS 7285: 1 nos, fire buckets IS 2546: 2 nos, rubber mats IS 15652, shock treatment chart (Bangali) and first aid box as per satisfaction of EIC.
Excavation of soil for installation of Earth Electrode and filling & ramming. For Morrum Soil.
Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: By ISI-Medium GI pipe
Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required for double earthing arrangement of whole installation.
Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe.
Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in suitable size PVC casing-capping (Precision make) with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, incl. necy. fittings etc. to light/fan/call bell point with Modular type switch (Brand approved by EIC) fixed on Modular GI / PVC switch board with top cover plate on wall incl. mending good damages to original finish. [PVC casingcapping and Switch board both on surface] Average run 5 mtr
Add GST @ 18%
Add CESS @ 1%
RABINDRA NATH KHAN
SAIBAL SARKAR
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .