Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹38.5 LAccepted-AOC | L1 | Accepted-AOC Accept | |
| 2 | L2₹41.5 L+₹3.0 L (7.66%)Rejected-AOC | L2 | Rejected-AOC Reject | |
| 3 | L3₹42.2 L+₹3.6 L (9.28%)Rejected-AOC | L3 | Rejected-AOC Reject | |
| 4 | L4₹42.7 L+₹4.2 L (10.8%)Rejected-AOC | L4 | Rejected-AOC Reject | |
| 5 | L5₹45.0 L+₹6.4 L (16.7%)Rejected-AOC | L5 | Rejected-AOC Reject |
Tender Value
₹46.5 L
EMD Value
₹93,000
Closing Date
3 Jun 2024, 6:55 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) No 02 Jodhpur
GE (AF) No 02 Jodhpur
Repair to certain Misc BR works at domestic area under AGE B/R-II, GE (AF) No 02 Jodhpur
2024_MES_652583_1
8458/E8
Open Tender
Civil Works
Item Rate
60 days
GE (AF) No 02 Jodhpur
As per Tender documents
7 documents required · 7 mandatory
₹500
GE (AF) No 02 Jodhpur
₹93,000
Yes
12 Jul 2024
6 May 2024
5 Jun 2024
6 May 2024
3 Jun 2024
21 May 2024
13 May 2024 - 20 May 2024
Amount
Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc. 15 cm thickness (below or above ground level) and removing from site all as specified and directed.
M&L for dismantling floor heart or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises and com[plete all as specified.
Taking down shutters of any description exc 1 sqm & n exc 2 sqm each and refixing in Same opening after doing suitable repairing hinges etc or as directed by Engr-In-charge
M&L for joint free non skid ceramic tiles, coloured, 7 to 8 mm thick in floors etc. (square/rectangular) area of each tile exc. 0.06 sqm but n. exc. 0.11 sqm, set & jointed in neat cement slurry & pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6
M&L for glazed ceramic tiles, coloured, 350x250x7mm/450x350x7mm thick on vertical surfaces such as skirtings, dados and risers to steps etc, set & jointed in neat cement slurry & pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 on stone masonry surfaces.
S&F in repairs, EWC vitreous china wash down water closet pan (pedestal pattern), white, with and including plastic water closet seat, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device fixed complete all as specified.
S&F in repairs vitreous- China wash down water closet Squatting pan ( Orissa Pattern) size 580 x 440 mm including flush pipe , PVC P-trap and PCC for fixing complete all as specified and as directed.
S&F in repairs vitreous china wash basin, white, flat back, size 550x400mm including brackets, cutting for and pinning in ends of brackets or erecting stand, brass chromium plated perforated waste coupling/ fittings 32 mm dia with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed and PVC waste pipe of 32mm bore and of suitable length, complete all as specified.
S&F in repairs PVC valveless, syphonic action type, flushing cistern, low level, 10 litres capacity, white, with inlet, ball valve, float and handle including brackets.
S&F in repairs PVC connections 15mm size with PTMT nuts of length 600mm.
S&F in repair CP soap dish, fixed to plugs with chromium plated screws and all as specified.
S&F in repair CP tubular towel rail, 20 mm dia, D type, 60 cm long between flanges and all as specified
S&F in repair CP grating 100 mm dia all as specified and as directed.
S&F in repairs sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long
Taking up or down steel tubing and connection including cleaning for refixing or removal to store yard of bore 15 mm.
Taking up or down steel tubing and connection including cleaning for refixing or removal to store yard of bore 20 mm.
S & F 15 mm dia galvanized steel tubing, medium grade, with all fitting and fixed complete to walls celling or laid in floors all as specified and directed.
S & F 20 mm dia galvanized steel tubing, medium grade, with all fitting and fixed complete to walls celling or laid in floors all as specified and directed.
S&F in repair stop/gate valves/angle valves cast copper alloy CP fancy type screwed down high pressure with crutch or butterfly handle for 15mm bore.
S&F in repair 15mm bib taps cast copper alloy CP Fancy type with crutch or butterfly handle screwed down for iron pipe or for brass ferrule.
S&F in repair 15mm Pillar taps cast copper alloy, capstan heads CP Fancy type with crutch or butterfly handle screwed down for iron pipe or for brass ferrule.
Dismantling of existing water tank (PVC/RCC/AC) exc 250 ltr but n exc 500 ltr capcity and removing from site complete as directed by Engr -in-charge.
S&F 500 ltr capacity (ISI marked) rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position incl 20mm bore ball PTMT. valve high pressure with polythyne float and flynut complete in repair.
Dismantling of existing water tank (PVC/RCC/AC) exc 500 ltr but n exc 1000 ltr capcity and removing from site complete as directed by Engr -in-charge.
S&F 1000 ltr capacity (ISI marked) rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position incl 20mm bore ball PTMT. valve high pressure with polythyne float and flynut complete in repair.
Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar of 100 mm dia and complete all as specified and directed by Engr-in-Charge.
S&F 75 mm bore PVC (SWR) pipes type ‘A’, single socketed, in any length with rubber ring joints fixed to walls and complete all as specified and directed by Engr-in-Charge.
S&F PVC (SWR) door bends 75mm dia with access door and complete all as specified and directed by Engr-in-Charge.
S&F PVC (SWR), junction single, (Single T) equal or unequal 75mm with acess door and complete all as specified and directed by Engr-in-Charge.
S&F PVC (SWR) floor trap with garting of outlet dia 75mm incl jointing with solvent cement and complete all as specified and directed by Engr-in-Charge.
S&F PVC (SWR) pipes 110 mm dia single socketed, in any length with rubber ring joints laid in trenches or in floors
S&F PVC (SWR) pipes 110 mm dia single socketed, in any length with rubber ring joints fixed in walls and complete all as specified and directed by Engr-in-Charge.
S&F PVC (SWR), junction single, (Single T) with acess door 110 mm dia equal or unequal and complete all as specified and directed by Engr-in-Charge.
S&F PVC (SWR) door bends 110 mm dia with acess door and complete all as specified and directed by Engr-in-Charge.
S&F 110 mm dia PVC WC connector with lip ring complete all as specified and directed by Engr-in-Charge.
Resecuring or easing & adjusting without taking down shutters of any description exc. 1 sqm but n. exc. 2 sqm each and complete all as specified and directed by Engr-in-Charge.
S&F in repairs stainless steel curatin rod , having outer dia 28 mm including stainless steel fixing brackets all as directed by Engineer-in-Charge.
S&F in repairs Stainless Steel cap for curtain rod for 28mm dia curtain rod as directed by Engineer-in-Charge.
M&L for hacking out old broken glass (any thickness, size, quality or description) from metal frame glazed with putty including punching or drilling out old glazing pin/spring, clips and providing new ones.
S&F sheet glass 3 mm thick, ordinary quality and glazing with oil putty in square n.exc. 0.5 sqm in each paneand complete all as specified.
S&F in repairs for center hole basin mixer without popup waste system and complete all as directed by Engr-in-charge
S&F in repairs brass chromium plated health faucet of 15 mm bore complete.
Dismantling fencing wire mesh any type complete all as specified and as directed.
Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground embedded in Concrete etc complete all as specified and as directed.
Excavation in post holes (or similar holes) each n.exc 0.50 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n.exc 50m and making good surface (Soft/loose soil) complete all as specified and directed by Engr-in-Charge.
M&L for mild steel misc works as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165.
M&L for cement concrete type C-2, 1:3:6 using 40mm graded aggregate as in foundation, filling and mass concrete complete all as specified and as directed.
Mild steel screw bolts(machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut (dia of neck 10mm and 50mm long) complete all as specified and directed by Engr-in-Charge.
Supply only chain link MS Galvanised fencing wire Mesh any size made into mattresses laped wired laid in postion all as complete all as specified and directed by Engr-in-Charge.
Fixing only chain link fencing including line wires, any mesh, size and type of any type of standards, rails, straining bolts, etc including provision of binding wire any size as approved by Engineer-in-Charge.
Supply only for mild steel bars 10mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engr-in-Charge.
M&L for preparation of new steel and iron surfaces of any description exc 10 cm width or girth and applying two coats of synthatic enamel paint over one coat of red oxide primer complete all as specified and as directed by Engr-in-Charge.
M & L for 75mm thick Plain Cement concrete type C- 2, 1:3:6 (40mm graded aggregate) complete all as specified and directed by EIC.
M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed by Engr-in-Charge.
M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, set and jointed in CM (1:4) with grey cement and With pigment complete all as specified and as directed.
M&L for Pre-cast cement concrete factory made kerb stone with 1:3:6 type C1 (20mm graded Stone aggragate) solid blocks, exc. 10 cm in width and setting in mortar,CM 1:6 complete all as specified and directed.
Complete removal of existing treatment of old surface of walls and applying two coats of wheather proof exterior emulsion paint complete all as specified and all as directed
M&L for preparation of old painted brick, stone, concrete, asbestos cement or plaster surfaces of any description, over 10 cm in width or girth not otherwise described and applying one coat of synthetic enamel paint.
M&L for preparation of old surfaces (plastered or unplastered) of walls including removing/scrapping down existing surface where ever necessary and applying two coat of oil emulsion distemper over two coat of wall care putty complete all as specified & directed.
Material & Labour for 75mm thick plain cement concrete C-1, 1:3:6 (using 20mm graded crushed stone aggregate) as in plinth protection/path finished fair and even without using extra cement complete all as spd & directed.
M&L for rubbing and mirror polishing on existing kota stone flooring where ever required complete all as specified and directed.
Preparation of old painted surface and M&L for one coat of plastic emulsion paint over plaster or un plaster surface complete all as specified.
Taking down cement or cement lime plaster of any description on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc and complete all as specified
M& L for 10mm thick rendering on stone masonary in CM 1:4 on walls using integral water proofing compound @ 3% weight of cement , finished even and smooth without using extra cement and all as specified.(NOTE;- Water profing compound shall be measured and paid seperately)
Supply only integral water proofing compound ISI Marked
M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of cement base paint, white or tinted, all as directed.
M&L for Providing precast cement concrete CM 1:6 type 1:3:6 solid building blocks or slabs 10cm thick (with plain or interlocking joints as directed) setting in mortar,complete, in walls complete all as specified and directed.
M&L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.
psj build solutions and company
GANGADHAN ENTERPRISES
M/S SUA DEVI
JAMWAY MATA CONSTRUCTION COMPANY
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .