TOKEN NO. GE-K-22-2024-25 - REPAIR AND MAINTENANCE OF LT PANELS AND CONNECTED ITEMS AT VARIOUS UNITS AT KARGIL, KAKSAR, HENISKUT, BUDHKHARBU, APATI, CHHANIGUND AND HARDAS UNDER GE KARGIL

Amount

Supply, installation, commissioning and testing in-replacement of factory made (CPRI approved) LT panel Board of Suitable size out door type (double door) 415 Volts, dust proof,vermin proof made out of CRCA sheet 3.15 mm thick duly compartmentalized inside panel with 2 mm thick CRCA sheet , to accommodate the incoming and outgoing each switch gear shall have be independent opening, and having provision for front and rear side opening with rubber beading and brass cable glands for each cable to make it weather and vermin proof. double door hinged type, both side openable, panel shall be mounted on angle of size (50 x 50 x 6 mm) & duly spray painted with seven tank process internally and externally with two coats of synthetic enamel paint over a coat of red oxide primer supported on 04 legs of suitable long each duly grouted in plain cement concrete blocks in 1:2:4 type B1 (using 20 mm graded stone aggregate) or as manufacturer instruction and including notice board & Danger plate complete with all connections incoming / out going including taking down of existing panel complete all as directed by Engineer-in-charge. comprising following accessories :- INCOMING (a) MCCB 4 Pole 400 amps, 415 Volt of breaking capacity not less than 36 KA (Ics=100 % of Icu) with Adjustable TM Range - 01 No for incoming. (b) Aluminium Busbar 600 Amp current rating duly sleeve insulated for set of 3 phase, 4 wire system - 01 Set.

Supply, installation, commissioning and testing in-replacement of factory made (CPRI approved) LT panel Board of Suitable size out door type (double door) 415 Volts, dust proof,vermin proof made out of CRCA sheet 3.15 mm thick duly compartmentalized inside panel with 2 mm thick CRCA sheet , to accommodate the incoming and outgoing each switch gear shall have be independent opening, and having provision for front and rear side opening with rubber beading and brass cable glands for each cable to make it weather and vermin proof. double door hinged type, both side openable, panel shall be mounted on angle of size (50 x 50 x 6 mm) & duly spray painted with seven tank process internally and externally with two coats of synthetic enamel paint over a coat of red oxide primer supported on 04 legs of suitable long each duly grouted in plain cement concrete blocks in 1:2:4 type B1 (using 20 mm graded stone aggregate) or as manufacturer instruction and including notice board & Danger plate complete with all connections incoming / out going including taking down of existing panel complete all as directed by Engineer-in-charge. comprising following accessories :- INCOMING (a) MCCB 4 Pole 315 amps, 415 Volt of breaking capacity not less than 36 KA (Ics=100 % of Icu) with Adjustable TM Range - 01 No for incoming. (b) Aluminium Busbar 500 Amp current rating duly sleeve insulated for set of 3 phase, 4 wire system - 01 Set.

Supply, installation, commissioning and testing in-replacement of factory made (CPRI approved) LT panel Board of Suitable size out door type (double door) 415 Volts, dust proof,vermin proof made out of CRCA sheet 3.15 mm thick duly compartmentalized inside panel with 2 mm thick CRCA sheet , to accommodate the incoming and outgoing each switch gear shall have be independent opening, and having provision for front and rear side opening with rubber beading and brass cable glands for each cable to make it weather and vermin proof. double door hinged type, both side openable, panel shall be mounted on angle of size (50 x 50 x 6 mm) & duly spray painted with seven tank process internally and externally with two coats of synthetic enamel paint over a coat of red oxide primer supported on 04 legs of suitable long each duly grouted in plain cement concrete blocks in 1:2:4 type B1 (using 20 mm graded stone aggregate) or as manufacturer instruction and including notice board & Danger plate complete with all connections incoming / out going including taking down of existing panel complete all as directed by Engineer-in-charge. comprising following accessories :-

Supply, installation, commissioning and testing in-replacement of factory made (CPRI approved) LT panel Board of Suitable size out door type (double door) 415 Volts, dust proof,vermin proof made out of CRCA sheet 3.15 mm thick duly compartmentalized inside panel with 2 mm thick CRCA sheet , to accommodate the incoming and outgoing each switch gear shall have be independent opening, and having provision for front and rear side opening with rubber beading and brass cable glands for each cable to make it weather and vermin proof. double door hinged type, both side openable, panel shall be mounted on angle of size (50 x 50 x 6 mm) & duly spray painted with seven tank process internally and externally with two coats of synthetic enamel paint over a coat of red oxide primer supported on 04 legs of suitable long each duly grouted in plain cement concrete blocks in 1:2:4 type B1 (using 20 mm graded stone aggregate) or as manufacturer instruction and including notice board & Danger plate complete with all connections incoming / out going including taking down of existing panel complete all as directed by Engineer-in-charge. comprising following accessories :- INCOMING (a) MCCB 4 Pole 250 amps ,415 Volt of breaking capacity not less than 36 KA (Ics=100 % of Icu) with adjustable thermal setting - 01 No for incoming. (b) Aluminium Busbar 400 Amp current duly sleev insulated for set of 3 phase, 4 wire system - 01 Set.

Supply, installation, commissioning and testing in-replacement of factory made (CPRI approved) LT panel Board of Suitable size out door type (double door) 415 Volts, dust proof,vermin proof made out of CRCA sheet 3.15 mm thick duly compartmentalized inside panel with 2 mm thick CRCA sheet , to accommodate the incoming and outgoing each switch gear shall have be independent opening, and having provision for front and rear side opening with rubber beading and brass cable glands for each cable to make it weather and vermin proof. double door hinged type, both side openable, panel shall be mounted on angle of size (50 x 50 x 6 mm) & duly spray painted with seven tank process internally and externally with two coats of synthetic enamel paint over a coat of red oxide primer supported on 04 legs of suitable long each duly grouted in plain cement concrete blocks in 1:2:4 type B1 (using 20 mm graded stone aggregate) or as manufacturer instruction and including notice board & Danger plate complete with all connections incoming / out going including taking down of existing panel complete all as directed by Engineer-in-charge. comprising following accessories :- INCOMING (a) S&F MCCB 4 Pole 400 amps ,415 Volt of breaking capacity not less than 36 KA (Ics=100 % of Icu)with adjustable thermal setting - 01 No for incoming. (b) Aluminium Busbar 600 Amps current duly sleev insulated for set of 3 phase, 4 wire system - 01 Set.

Supply, installation, commissioning and testing in-replacement of factory made (CPRI approved) LT panel Board of Suitable size out door type (double door) 415 Volts, dust proof,vermin proof made out of CRCA sheet 3.15 mm thick duly compartmentalized inside panel with 2 mm thick CRCA sheet , to accommodate the incoming and outgoing each switch gear shall have be independent opening, and having provision for front and rear side opening with rubber beading and brass cable glands for each cable to make it weather and vermin proof. double door hinged type, both side openable, panel shall be mounted on angle of size (50 x 50 x 6 mm) & duly spray painted with seven tank process internally and externally with two coats of synthetic enamel paint over a coat of red oxide primer supported on 04 legs of suitable long each duly grouted in plain cement concrete blocks in 1:2:4 type B1 (using 20 mm graded stone aggregate) or as manufacturer instruction and including notice board & Danger plate complete with all connections incoming / out going including taking down of existing panel complete all as directed by Engineer-in-charge. comprising following accessories :- INCOMING (a) MCCB 4 Pole 160 amps ,415 Volt of breaking capacity not less than 25 KA (Ics=100 % of Icu) with adjustable thermal setting - 01 No for incoming. (b) Aluminium Busbar 300 Amp current duly sleev insulated for set of 3 phase, 4 wire system - 01 Set.

Srl item No. 6.00 (Contd...) OUTGOING (c) MCCB 4 pole 125 amps ,415 Volt of breaking capacity not less than 25 KA (Ics=100 % of Icu) with adjustable overload setting - 03 Nos (d) Volt meter range 0-500 volt-01 (e) Ammeter Rang 0-600 amps with suitable CTs-01 Nos (f) LED Indicating Lamps R,Y,B - 01 Set

Supply, installation, commissioning and testing in-replacement of factory made (CPRI approved) LT panel Board of Suitable size out door type (double door) 415 Volts, dust proof,vermin proof made out of CRCA sheet 3.15 mm thick duly compartmentalized inside panel with 2 mm thick CRCA sheet , to accommodate the incoming and outgoing each switch gear shall have be independent opening, and having provision for front and rear side opening with rubber beading and brass cable glands for each cable to make it weather and vermin proof. double door hinged type, both side openable, panel shall be mounted on angle of size (50 x 50 x 6 mm) & duly spray painted with seven tank process internally and externally with two coats of synthetic enamel paint over a coat of red oxide primer supported on 04 legs of suitable long each duly grouted in plain cement concrete blocks in 1:2:4 type B1 (using 20 mm graded stone aggregate) or as manufacturer instruction and including notice board & Danger plate complete with all connections incoming / out going including taking down of existing panel complete all as directed by Engineer-in-charge. comprising following accessories :- INCOMING (a) MCCB 4 Pole 160 amps, 415 Volt of breaking capacity not less than 25 KA (Ics=100 % of Icu) with adjustable thermal setting - 01 No (b) Aluminium Busbar 300 Amp current duly sleev insulated for set of 3 phase, 4 wire system - 01 Set.

Srl item No. 7.00 (Contd...) OUTGOING (c) MCB SPN 63 amps ,C curve 240 Volt of breaking capacity 6 KA - 08 Nos (d) Volt meter range 0-500 volt-01 (e) Ammeter Rang 0-600 amps with suitable CTs-01 Nos (f) LED Indicating Lamps R,Y,B - 01 Set

Supply, installation, commissioning and testing of factory made (CPRI approved) LT feeder Pillar Box of Suitable size out door type (double door) 415 Volts, dust proof,vermin proof made out of CRCA sheet 3.15 mm thick duly compartmentalized inside panel with 2 mm thick CRCA sheet , to accommodate the 01 No MCCB Of size 63 Amp,4 pole , 16 KA fixed thermal Megnatic Range, switch gear shall have be independent opening & 40 X5 mm size copper bus bar of suitable length 4 set of busbar with RYBN sleeves and having provision for front and rear side opening with rubber beading and brass cable glands for each cable to make it weather and vermin proof. double door hinged type, both side openable, air fins for ventilation, panel shall be mounted on Iangle iron frame of size (50 x 50 x 6 mm) & duly spray painted with seven tank process internally and externally with two coats of synthetic enamel paint over a coat of red oxide primer supported on 04 legs suitable long each duly grouted in plain cement concrete blocks in 1:2:4 type B1 (using 20 mm graded stone aggregate) manufacturer instruction and including notice board and danger plate complete inclduing all connections incoming / out going, in-replacement including taking down of existing LT Fidder pillar Box complete all as directed by Engineer-in-Charge.

Note for Item No. 01 to 08 :- (i) Drawing of LT Panel shall be approved by GE before placing order by the contractor. (ii) All types of spares such as gland, switchgears etc shall be included in over all cost quoted.

S&F in replacement of Cable route indicator, duly engraved with 'LT CABLE 1100 VOLT' on cast iron round plate 150 mm dia with provision of 500 mm long (minimum) single leg/stand of flat iron 40 x 5 mm, welded/riveted on back side of plate, fixed and grounted in position with PCC type C-1, block of suitable size complete.

Supply and fixed TPN Distribution Board Vertical type 4 way double door made out of CRCA mild steel sheet surface with insulated material like polyester or with powder coating flushl/surface mounting with copper bus bar rating 250 Amps, with two neutral bar, 2 earth bar and cable tie for cable management, IP-54 Protection and provision and including MCCB 4 pole 100Amp,16KA as incomer and MCBs SP 32 Amp 10KA,C curve as outgoing, dust and vermin proof complete as per IEC61439-3 complete all as directed.

M&L for synthetic rubber insulated mats 2.5mm thick for voltage upto 11 KV size 2Mx1M for electrical purpose as per IS-15652-2006 (super seding IS 5424) suitable for electrical shock safety complete all as specified and directed.

Note : Deduction for amount of Rs 27,870.00 as listed in Schedule A Part - II ( Schedule of Credit) shall be made while awarding of contract.

M/S BHAT ENGINEERS

SUMEET TRADING CORPORATION