Thanthoni Block - UGF - 2023-24-Repairs to the PUE school building in vattara kalvi office at Thanthonimalaipatty in Thanthoni Panchayat

Amount

Name of the Work :Repairs to the PUE school building in vattara kalvi office at Thanthonimalaipatty in Thanthoni Panchayat union

Dismantling One course pressed tiles Roof inish in cement mortor

Towards the cost for chipping of cement concrete and roughening etc complete

Towards the cost for clean and removal of cement plaster from walls

Plastering with cm 1:3 mix to 10 mm thick including cost and conveyance of all materials to site and all labour charges etc

Dismantling Reinforced cement concrete including all charges

Plastering with cm 1:5 mix to 12 mm thick including cost and conveyance of all materials to site and all labour charges etc

Providing granolithic floor finish in cement concrete 1:2:4 mix using 10-12mm ISS metal to 25mm thick including cost and conveyance of all materials to siteand all labour charges for mixing, laying, curing etc complete

Pressed tiles of size 23x23x2cm with cement mortar 1:3 mix pointed with the same oiled mortar including cost and conveyance of all materials to site and all

Pointing with cement mortar 1:3 to full depth of tiles using crudeoil 10% by weight of cement including cost and conveyance of all materials to

Wthite washing two coats using shell lime including cost and conveyanece of all materials to site and all labour charges etc complete

Distembering two coats with best approved distember including cost and conveyance of all materials to site and all labour charges etc complete

Painting two coats of newly plastered wall surface with ready mixed Plastic Emulsion Paint of First quality of approved colour over a priming Coat including thorough scrapping , clean removal of dirt and including necessary plaster of paris putty wherever required etc, complete complying with standard specification (including primer) For OUTER WALL Surface.

Painting two coats over old iron works using ready mixed enamel paint including cot and conveyance of paint and all labour charges etc complete.

Wiring with 2 x 1.5 sq.mm(22/0.3) PVC insulated SC. Unsheathed Cu. Conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A F.T. switch withpainting of suitable colour for open PVC light point / fan point (For electrical regulator).SD 17

Supply and fixing of 4' 36Watts Flu Fitting complete with Electronic Ballast With TW round Block On Wall or Ceilling With Flu Tube With PVC unsheathed Copper Leads from Terminal to the Tube Light Fiittings (SD 87)

Supply and fixing Of 1200mm (48") Sweep AC Ceiling Fan complete with stepped Electronic 300 W Regulator , with 1m down rod with Fan clamp with side plates and cross arm of size 450mm (18") (SD106)

Wiring with 2 x 1.5 sq.mm(22/0.3) PVC insulated SC. Unsheathed Cu. Conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150x100x113mm TW switch box for 5A3 pin non inter locking CS plug with painting of suitable colour with continuous earth wire connection of 14 SWGTC wire for open PVC plug point. (SD 36)

GST Amount for providing Service to Government Contract Works for the above ConstructionWorks. GST Amount is the Total GST Amount for overall quoted amount above this row in column "BB" for all works in this package} (Refer Clause 13.2 & 13.3 of Section 2 of Instruction to Bidders (ITB) of SBD)

K.RADHA