DIET Complex at Jukhala Distt Bilaspur HP SH Repair and maintenance of Institute and Hostel Block including internal external Water Supply Sanitary Installation

Amount

Dressing the ground including cutting and filling upto 15 cm. including carriage of material in all leads and lifts:- Spade Work.

Providing form work with steel plates 3.15mm thick welded with angle iron frames 30x30x5mm so as to give a fair finish including centering, shuttering, strutting and propping, etc. with wooden battens and ballies heights of propping and centering below supporting floor to ceiling in all heights and removal of the same for in-situ reinforced concrete and plain concrete work including carriage of material in all leads and lifts:-

Flat surfaces such as soffits of suspended floors, roofs including inclined surfaces up to any degree, landings and the like: (i) Floors, etc. upto 200 mm in thickness.

Beams, cantilevers, girders and lintels sides and soffits of beams, small ends of beams,beam haunching, cantilivers, girders, bressumers and lintels not exceeding 1 metre in depth.

Edges of slabs and breaks in floors and walls under 20cm wide.

Providing and laying cement concrete 1:8:16 (1cement: 8sand:16graded stone aggregate 20mm. nominal size) and curing complete on slab and floor excluding the cost of form work screed laid under flooring.including carriage of material in all leads and lifts.

Providing and laying cement concrete 1:1.5:3 (1cement :1.5 sand :3 graded stone aggregate 20mm. nominal size) and curing complete excluding cost of form work and reinforcement including carriage of material in all leads and lifts for reinforced concrete work in: Suspended floors roofs, landings and shelves and their supports, balconies, beams, girders, bressumers and cantilevers upto floor two level.

Providing Tor/ TMT steel reinforcement for R.C.C. work including bending, binding and placing in position complete upto floor all level including carriage of material in all leads and lifts:- Tor Steel.

Brick work using common burnt clay building bricks in Super-structure above plinth level upto floor two level (Second Class Bricks). including carriage of material in all leads and lifts:- In Cement Mortar 1:6 (1 Cement : 6 Sand) .

Half brick masonry in common burnt clay building bricks in superstructure including carriage of material in all leads and liftsCement Mortar 1:4 (1 cement:4 sand) Second Class Bricks.

Providing wood work in frames of false celling partitions etc. sawn and put-up in position. including carriage of material in all leads and lifts : 2nd class deoder wood .

Providing and fixing 40mm thick 2nd class deodar wood panelled door shutters having styles and top rail 100mm width, lock rail 150mm wide and bottom rail 200mm wide with pannel insetion of 12mm thick prelaminaated board both side bwp phenol bonded exterior/interior grade including bright finishedblack enamelled iron butt hinges with necessary screws and chamfaered edged beading 30x20mm on both faces of shutters including carriage of material in all leads and lifts.

Providing and fixing 40mm thick 2nd class deoder wood single/double leaf glazed window shutters having styles and top rail and bottom rail 75mm width and chamferred edged moulding 20x10mm for glass panes complete including the cost of glass panes and bright finished black enamelled iron butt hinges with necessary screws including carriage of material in all leads and lifts.

Providing and fixing wire gauge shutters using galvanized MS wire gauge of IS gauge designation 85 –G with wire of dia 0.56mm for doors, windows and clerestory windows and chamfered edged beading 20x12mm including bright finished black enameled iron hinges with necessary screws including carriage of material in all leads and lifts. 40 mm thick 2nd class deodar wood.

Providing and fixing plain asbestos cement sheet ceiling of approved quality with butt jointing and wood screws (frame work and cover fillets to be measured and paid for separately) including carriage of material in all leads and lifts:- 5 mm thick

Providing and fixing M.S. grills of required patterns in wooden frames of windows etc. with M.S. Flats, square or round bars with round headed bolts and nuts or by screws including carriage of material in all leads and lifts.

Providing and fixing oxidized aluminium sliding door bolts with nuts and screws etc. complete including carriage of material in all leads and lifts.

Providing and fixing oxidised aluminium tower bolts (barrel type) with necessary screws etc. complete including carriage of material in all leads and lifts.

Providing and fixing oxidized aluminium handles with the necessary screws etc. complete.including carriage of material in all leads and lifts.

Providing and fixing oxidized M.S. hooks and eyes.including carriage of material in all leads and lifts. 150mm.

Providing and fixing bright finished or/and black enameled helical door spring with necessary screws etc. complete including carriage of material in all leads and lifts. 150mm.

Providing and fixing 100mm bright finished brass floor door stopper with rubber cushion screws etc. to suit shutter thickness complete,including carriage of material in all leads and lifts.

Providing and fixing oxidized M.S. hasps and staples (safety type) with necessary screws etc. complete including carriage of material in all leads and lifts. 90mm

Providing and fixing 19mm thick water proof commercial board shutter for cup boards including fixing with nickel plated piano hinges with screws etc. complete including carriage of material in all leads and lifts

Providing and fixing 19mm thick water proof commercial board in shelves/box for cup board with butt joints & fixing with nails & screws etc. complete including carriage of material in all leads and lifts.

Providing and fixing 10mm thick anti skid water proof stain and impect resistent heavy duty vetrified tiles any size/colour manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm thick cement mortar 1:3 (1 cement : 3 sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete including carriage of material in all leads & lifts.

Glazed tiles 6mm thick (any size/colour) in skirting riser of steps and dado 12mm thick cement mortar 1:3(1cement:3sand) and jointed with white cement slurry including carriage of material in all leads and lifts.

Providing corrugated G.I sheet roofing fixed with galvanised iron J.or L. hooks bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers filled with white lead complete excluding the cost of purlins rafters and trusses including carriage of material in all leads and lifts. 0.63 mm thick sheet.

Providing and fixing 0.60mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees as required as per the direction of Engineer-in-charge including carriage of material in all leads and lifts.

Providing ridges or hips 60 cm over all in plain G.I.sheet with galvanised iron J or L hooks. bolts and nuts 8mm dia G.I. Limpet and bitumen washers copmlete: including carriage of material in all leads and lifts. 0.63 mm thick sheet.

Providing valleys 90 cm over all in plain G.I. sheets fixed with galvanised iron J or L hooks. bolts and nuts 8mm dia G.I. limpet and bitumen washers complete: including carriage of material in all leads and lifts. 0.63 mm thick sheet. .

Providing and fixing on wall face C.I. rain water pipe including filling the joints with spun yarn and cement mortar 1:2(1cement:2sand) including carriage of material in all leads and lifts. 100mm diameter pipe.

Providing and fixing M.S. holder bat clamps of approved design to C.I. or S.C.I. pipes embedded in and including cement concrete blocks 10x10x10cms of 1:2:4mix(1cement:2sand:4graded stone aggregate 20mm nominal size) and cost of cutting holes and making good the walls etc. including carriage of material in all leads and lifts.100mm diameter C.I./S.C.I. pipe.

150mm diameter C.I./PVC pipe.

100mm diameter C.I./S.C.I. pipe.

Providing and fixing on wall face C.I. accessories for rain water pipes including filling the joints with spun yarn soaked in neat cement slurry and cement mortar 1:2(1cement:2sand)including carriage of material in all leads and lifts:-

C. I. plain bend 100mm diameter.

C. I. Head flat or corner type bend:- 100 mm diameter.

Providing and fixing on wall faces PVC (D-Plast) for rain water pipes of working pressure not less than 4.5 kg/sqm including filling the joints with approved adhesive complete. including carriage of material in all leads and lifts:- 150 mm dia pipes

Providing and fixing on wall faces PVC (D-Plast) accessories for rain water pipes including filling the joints with approved adhesive complete including carriage of material in all leads and lifts

PVC Plain bend 150mm dia

PVC shoe 150mm dia

Steel work welded in built up sections,trusses and framed work,including cutting ,hoisting ,fixing in position and applying a priming coat of red lead paint including carriage of material in all leads and lifts:-

In gratings framed guardbars,ladders,railling,brackets and similar works.

Providing and fixing pressed steel door frames manufactured from commercial mild steel sheet of 1.66 m thickness including hinges, lock, jambs, beeds and if required angle threshold of mild steel angle of section 50x25mm or base ties of 1.6mm pressed mild steel welded or rigidly fixed together by steel butt hinges 2.5mm thick with guards, lock strike plate and shock absorber as specified and applying a coat of approved steel primer after pre-treatment of the surfaces as directed by the Engieneer-in-charge including carriage of material in all leads and lifts:-

Profile – A.

Profile – B (double rebated).

Providing and fixing M.S. BP Sheet 1.66mm to 2mm thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separtelyroviding and fixing M.S. BP Sheet 1.66mm to 2mm thick in eaves board/facia /soffits/ ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer -in-charge (Base members of steel work shall be measured & paid separtely.

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops,dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete including carriage of material in all leads and lifts.

Applying priming coat over new steel & other metal surfaces after & including preparing the surface by thoroughly cleaning oil grease dirt and other foreign matter and scoured with wire brushes fine steel wool scrapers and sand paper complete including carriage of material in all leads and lifts.With ready mixed priming paint brushing red lead,Red-oxide/zinc oxide chrome

Painting two coats (excluding priming coat on new steel and other metal surfaces eith enamel paint brushin to give an even shade including cleaning the surface of all dirt,dust and other foregin matters including carriage of material in all leads and lifts:- Enamel white paint other than white.

Painting one coats (excluduing priming coat) on previously painted steel and steel based surfaces with enamel paint to give an even shade on ceilling including cleaning the surface of dirt, dust and other foreign matter sand papering and stoping including carriage of material in all lead in all leads and lifts:- With enamel paint other than white.

Extra over item No 40 for every subsequent coat of paint carriage of material in all lead in all leads and lifts

Applying priming coat over new wood and wood based surfaces after and including prepering the surface by thoroughly cleaning oil,grease,dirt and other foreign matter) sand papering and knotting including carriage of material in all leads and lifts:- Readymixed paint brushing wood primer pink

Painting two coats(excluding coat) on new wood and wood based surface with enamel paint to give an even shade including cleaning the surface of dirt,dust and other foreign matter,sand papering & stoping including carriage of material in all leads and lifts:- With white enamel pain other than white

Painting one coats (excluduing priming coat) on previously painted wood and wood based surfaces with enamel paint to give an even shade on ceilling including cleaning the surface of dirt, dust and other foreign matter sand papering and stoping including carriage of material in all lead in all leads and lifts:- With enamel paint other than white.

Extra over item No.44 for every subsequent coat of paint carriage of material in all lead in all leads and lifts

Painting one coat (excluding priming coat)on previously painted rain water soil waste and vent pipes and fitting with readymixed bituminuous paints brushing black anticorrosive to give an even shade including cleaning of all dirt ,dust and other foreign matter including carriage of material in all lead in all leads and lifts:- 100 mm dia

Finishing wall with weather proof exterior grade mulsion of approved design (Apexultima) or its quarlied on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete including carriage of material in all leads and lifts.

Distempering(one coat) with oil bound washable distemper of approved brand and manufature and of required shade,on decorated wall surfaces to give an even shade,after thoroughly brushing the surface clean of all grease,dirt,loose pieces of scales and also including preparing the surface even and sand papered smooth.

Extra over item No.48 for every subsequent coat of distempering with oil bound washable distemper of approved brand and manufature including carriage of material in all lead in all leads and lifts

Distempering (one coat) with oil bound washable distemper of approved brand and manufature and of required shade,on ceilling surfaces to give an even shade,after thoroughly brushing the surface clean of all grease,dirt,loose pieces of scales and also including preparing the surface even and sand papered smooth.

Extra over item No.50 for every subsequent coat of distempering with oil bound washable distemper of approved brand and manufature including carriage of material in all lead in all leads and lifts

Repairs of plaster in patches of 2.50 Sqm. And under and 10 to 15 mm thick including cutting the bpatch in proper shape and replastering the surface of the wall including disposal of rubbish to the dumping ground with in all leads lift including carriage of material in all leads and lifts. Cement mortar 1:3 (1 cement: 3 sand).

Fixing doors, windows and clerestory windows, ventilators etc. (wood or steel) shutters including hinges and other attachements etc. complete including carriage of material in all leads and lifts:- Not exceeding 3 sq.m in area.

Supplying and fixing glass panes with putty and nails including removal of broken glass panes wherever necessary:- Plain Glass: 4mm thick.

Providing plinth protection 50mm thick in cement concrete 1:3:6 (1 Cement : 3 Sand : 6 Graded stone aggregated 20mm nominal size)including carriage of material in all leads and lifts.

Providing under layer for plinth protection of 75mm thick (unconsolidated) bed dry brick/stone aggregated 40mm nominal size with rammed and consolidated and grouted with fine sand including preparation of ground including carriage of material in all leads and lifts.

Constructing Course rubble hammer dressed 'U' shape open surface drain with side wall.15x22 cm in cement mortar 1:6 (1 Cement : 6 Sand) and inside plastring with cement plaster 1:3 (1 Cement:3 Sand) including earth work and laying 10 cm cement concrete in 1:5:10 (1 Cement : 5 Sand : 10 graded stone aggregate) of 40 mm nominal size) and 7.5 cm cement concrete 1:2:4 (1 Cement : 2 Sand : 4 Graded stone aggregate of 20 mm nominal size) and finished with a floating coat of neat cement complete as per standard design.) including carriage of material in all leads and lifts.

Demolition below G.L. upto all depth and disposal of unserviceable materials within all lead including carriage of material in all leads and lifts:- Un-reinforecd cement concrete upto 15 cm. Thickness.

Demolition above G.L.upto all floor level including disposal of unserviceable materials within all lead including carriage of material in all leads and lifts . un-reinforced cement concrete upto 15cm. Thickness.

Demolition of brick work above G.L. upto all floor level including stacking of serviceable materials and disposal of un-serviceable materials within all lead including carriage of material in all leads and lifts:. In cement mortar.

Dismantling tiled floors laid in mortar upto all floor level including stacking of serviceable materials and disposal of un-serviceable materials within all lead (wooden/concrete joists to be measured and paid for separately) including carriage of material in all leads and lifts

For thickness of tiles upto 25mm

For thickness of tiles above 25mm and upto 40mm

Dismantling roofing including ridges, hips, valleys, gutters etc. stacking the serviceable materials and disposal of un-serviceable materials within all lead including carriage of material in all leads and lifts G.I. Sheet roofing

Dismantling doors, windows and clerestory windows, ventilators etc. (wood or steel) shutters including chowkhats, architraves, hold fasts and other attachements etc. complete and stacking them within all lead including carriage of material in all leads and lifts.

Not exceeding 3 sq.m in area.

Exceeding 3 sqm in area.

Taking out doors, windows and clerestory windows shutters (steel or wood) including stacking within all lead including carriage of material in all leads and lifts:- Not exceeding 3 sqm in area.

Providing and fixing to wall ceiling and floors galvanized mild steel tubes (Medium grade) tube fittings and clamps including making good the wall, ceiling and floors, including carriage of material in all leads and lifts, confirming to BIS specification:-

15mm nominal bore.

20mm nominal bore.

Providing and fixing sand cast/cast iron spun spigot and socket soil waste and ventilating pipes (lead caulked joints to be measured and paid for separately)confirming to BIS specification including carriage of material in all leads and lifts:-

75mm nominal bore.

100mm nominal bore.

Providing and fixing ISI marked sand cast iron/cast iron spun fittings and accessories:- (a) Bends of required degree (any radius) with oval access door insertion rubber washer 3mm thick bolts and nuts complete including carriage of material in all leads and lifts:-

75mm nominal size

100mm nominal size.

Plain Bend:-

75mm nominal size.

100mm nominal size.

Single equal branch of required degree with oval access door insertion rubber washers 3mm thick bolts and nuts complete confirming to BIS specification including carriage of material in all leads and lifts:-

75mm nominal size

100mm nominal size.

Plain Single equal branch.

75mm nominal size

100mm nominal size

Collars:-

75mm nominal size

100mm nominal size.

Providing lead caulked joint to sand cast iron/cast (spun) iron pipes and fittings including testing of joints including carriage of material in all leads and lifts:-

75mm nominal size

100mm nominal size.

Providing and fixing cast iron floor trap of self cleaning design with sand cast iron screwed down or C.P. hinged grating with or without vent arm complete including cost of cutting and making good the walls and floors. 75mm nominal size confirming to BIS specification including carriage of material in all leads and lifts.

Providing and fixing vitreous china water closet squatting pan (Indian type WC pan) size 580mm (earth work bed concrete, foot rest and trap to be measured and paid for separately) including carriage of material in all leads and lifts. Orissa pattern confirming to BIS specification.

Providing and fixing vitreous china wash down water closet (European type W.C. pan) with integral "P" or "S" trap including jointing the trap with soil pipe in cement mortar 1:1(1cement:1sand) (seat and cover to be measured and paid for separately including carriage of material in all leads and lifts:- Ordinary closet.

Providing and fixing sand cast iron 100 mm size “P” or “S” trap (ISI marked) for water closet squatting pan including jointing the trap with the pan and soil pipe in cement mortar 1:1(1cement:1sand) Sand cast iron including carriage of material in all leads and lifts.

Providing and fixing plastic seat (Solid/Hollow type) and cover for wash down water closet with C.P. Brass hinges and rubber buffers:- Solid type white plastic seat and cover including carriage of material in all leads and lifts.

Providing and fixing PTMT coloured/white high density polythene/poly propylene 10.00 litres capacity( full flush) European standard control low level flushing cistern with fittings with a pair of brackets with fittings such as lead valve, syphon, 15mm nominal size PVC ball valve with poluthene float, with push button, couplings for connections with inlet, outlet and overflow pipe 40mm dia C.P. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet( overflow pipe to be measured and paid for seprately) including carriage of material in all leads and lifts, Confirming to BIS specification.

Providing and fixing 600mmx120mm glass shelf with C.P. brass bracket and guard rail complete, fixed to wooden plugs wth C.P. brass screws including carriage of material in all leads and lifts.

Providing and fixing vitreous china wash basin with single/double holes for pillar tap with C.I. or M.S. brackets painted white including holes and making good the same but excluding fittings confirming to BIS specification including carriage of material in all leads and lifts:- Flat back 550mmx400mm.

Providing and fixing C.P. Bottle Trap for wash basin and sink including carriage of material in all leads and lifts : 32mm dia

Providing and fixing C.P. brass waste for wash basin or sink 32mm dia confirming to BIS specification including carriage of material in all leads and lifts.

Providing and fixing M.I. union for wash basin or sink 32mm dia confirming to BIS specification including carriage of material in all leads and lifs.

Providing and fixing C.P. brass bib tap (Superior or heavy type) including carriage of material in all leads and lifts : 15mm dia long body

Providing and fixing C.P. brass pillar tap with capastan head including carriage of material in all leads and lifts confirming to BIS specification:- 15mm dia.

Providing and fixing C.P. brass angle valve 15mm dia without nuts and pipe confirming to BIS specification including carriage of material in all leds and lifts.

Providing and fixing PVC connection pipe with brass union 45 cm length 15mm nominal bore including carriage of material in all leads and lifts confirming to BIS specification.

Poviding and fixing C.P. brass toilet paper holder including carriage of material in all leads and lifts confirming to BIS specification.

Providing and fixing PTMT jet sprayer of approved quality and colour with one metre tube including carriage of material in all leads and lifts:- (Make:- Viking).

Providing and fixing 600mm x 450 mm bevelled edge mirror of superior glass mounted on 6mm thick A.C. Sheet or plywood sheet and fixed to wooden plugs with C.P. Brass screws and washers including carriage of material in all leads and lifts (Make:- Atul, Modi Guard, Saint Gobains).

Providing and fixing 100mm dia chromium plated grating of superior quality for floor, gully or nahni trap, confirming to BIS specification including carriage of material in all leads and lifts.

Providing and fixing C.P. brass flush pipe/spreaders for urinal with fitting such as unions, clamps etc. (all in C.P. Brass) including cutting holes and making good the same including carriage of material in all leads and lifts:-15mm nominal bore:- (Make:- ESS-ESS/CZAR/NOVA/JAQUAR).

Providing and fixing vitreous China bowl pattern urinal including connection the urinal with waste pipe by means of white lead mixed with chopped hemp (waste pipe to be measurred and paid for separately) including carriage of material in all leads and lifts:- Flat back type of size 430mm x 260 mm x 350 mm (Make:- Hindware, Cera, Jaquar).

Providing and fixing P.V.C. plastic waste pipe for wash basin or sink of following size BIS specification including carriage of material in all leads and lifts.32mm mm dia.

Nishant Chauhan

Ram Pal

Govt Contractor

Raj Kumar