CERTAIN REPAIR TO JOINERY, FLOOR, PLASTER, ROOF TREATMENT AND ALLIED B/R WORKS AND CLEANING OF SEWAGE LINES AT PCDA (AF) DEHRADUN UNDER AGE B/R-III OF GE CLEMENT TOWN

Amount

Demolition of cement concrete (Un-reinforced) in ground floors and pavings n.exc 15cm thick (above or below GL) complete all as specified and directed by Engr-in-Charge.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed by Engr-in-Charge.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed by Engr-in-Charge.

Dismantling wrought iron or mild steel work of any description not otherwise described complete all as specified and directed.

Demolition of brick work or stone masonry built in cement mortar including all quoins, arches, jambs etc complete all as specified and directed by Engr-in-Charge.

Demolition of stone slabs and tiles of any description or thickness laid bedded and pointed in any mortar as in floor, aprons,dado etc as specified and directed.

Dismantling wall & ceiling boards (fibre, insulation etc ) or insulation boards, slabs, blankets any thick ness including cover fillets complete all as specified and directed by Engr-in-Charge..

Dismantling timber scantling 40 Sqcm and over in section in any position complete all as specified and directed by Engr-in-Charge.

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed by Engr-in-Charge.

Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr-in-Charge.

Taking down cement plaster of any description on brick work or stone masonry walls including rackingout joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engr-in-Charge.

Taking down chowkhats or frames with shutters (without taking off shutter from the frame) of size n.exc 1.50 Sqm complete all as specified and directed by Engr-in-Charge.

Taking down chowkhats or frames with shutters (without taking off shutter from the frame) of size exc 1.5 Sqm and n.exc 4 Sqm complete all as specified and directed by Engr-in-Charge.

Taking down shutter of any description exc. 1 sqm but not exc. 2 sqm each complete all as specified and directed by Engr-in-Charge.

Taking down shutters exc 1 Sqm and n.exc 2 Sqm of any description and refixing in same opening/position include cutting for size and fitting including making good of distrub area complete all as specified and directed by Engr-in-Charge.

Taking up or down 15mm dia steel tubing and connections including cleaning for re-fixing or removal from site complete all as specified and directed by Engr-in-Charge.

Taking up or down 20mm dia steel tubing and connections including cleaning for re-fixing or removal from site complete all as specified and directed by Engr-in-Charge.

Cleaning of existing water storage tanks of capacity exc 250 ltr but n.exc 500 ltr and removing all scales and dirt, etc from tanks and from mouths of circulating pipes complete all as specified and directed by Engr-in-Charge.

Cleaning of existing water storage tanks of capacity exc 500 ltr but n.exc 1000 ltr and removing all scales and dirt, etc from tanks and from mouths of circulating pipes complete all as specified and directed by Engr-in-Charge.

M&L brick work with sub class "B" old size bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and directed by Engr-in-Charge.

All as item No.20 above but except Brick work only in CM 1:6 complete complete all as specified and directed by Engr-in-Charge.

M&L for half brick work with subclass ‘B’ bricks, straight or curved on plan to any radius built in CM 1:4 complete all as specified and directed by Engr-in-Charge.

S&F Pre-painted galvalume aluminum zinc coated GI based corrugated steel sheet 0.50mm thick of any colour, having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge.

S&F Pre-painted galvalume aluminum zinc coated GI based plain steel sheet 0.50mm thick of any colour, having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridge etc fixed with self tapping screwscomplete all as specified and directed by Engr-in-Charge.

S&F Rolled Mild steel work in joists, channel, angles or tee section, MS tube, fixed independently without connecting plates as fin purlins, rafters, posts etc.confirming to Fe 410-W (gde E-250 quality -B) complete all as specified and directed by Engr-in-Charge.

S&F mild steel framed work as in grills, gratings etc with ends of bars shouldered and riveted or forged into spikes, framed guard bars, barred iron doors, ladders, railings etc, conforming to Fe-290, Gde-E-165 complete all as specified and directed by Engr-in-Charge.

S&F Welded steel wire fabric weight n.exc 4 kg/sqm fixed to wood or steel members complete all as specified and directed by Engr-in-Charge.

M&L for 25mm thick PCC (1:2:4) type B-0 (using 20mm graded stone aggregate) as in sub base of floor complete all as specified and directed by Engr-in-Charge.

M&L 50mm thick PCC (1:3:6) type C-2 (Using 40mm graded stone aggregate) as in plinth protection /hardstanding , laid in panels, finished the top surfaces even and fair without using extra cement complete all as specified and directed by Engr-in-Charge.

M&L 75mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in sub base of floor complete all as specified and directed by Engr-in-Charge.

M&L reinforcement cement concrete type B-1 1:2:4 slab supported on wall (20mm graded stone aggregate) for slab supported on walls, beams and columns in floors , roofs landings, balconies, canopies deck slab and in shelves and the like complete all as specified and directed by Engr-in-Charge.

M&L for reinforced precast cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in landings, cover slabs (for manholes etc.), shelves and similar articles with plain faces including necessary form work, set in cement mortar 1:4 complete all as specified and directed by Engr-in-Charge. (Note:- Reinforcement shall be measured and paid for separately)

M&L mild steel TMT bars 10mm dia and over, cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engr-in-Charge.

M&L for use and waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick for fair finished surfaces (Horizontal or sloping) complete all as specified and directed by Engr-in-Charge.

M&L for Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roof n.exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10 cm but n.exc 20 cm wide complete all as specified and directed by Engr-in-Charge.

M&L Vitrified coloured tiles 8-10mm thick light Shade/Double charged (square/rectangular) area of each tiles n. exc 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed of cement mortar 1:6 laying floor finishes, complete all as specified and directed by Engr-in-Charge.

M&L Vitrified coloured tiles 8-10mm thick light Shade/Double charged (square/rectangular) area of each tiles n. exc 0.36 sqm in vertical surface such as dado/ skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 to recieve tiles complete all as specified and directed by Engr-in-Charge.

M&L for Non skid Endura coloured tiles 10-12mm thick (square/rectangular) grade-4, area of each tile not exc 0.16 Sqm over and including 15mm thick screed bed in Cement mortar (1:6) in flooring, set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed by Engr-in-Charge.

M&L for Non skid Endura coloured tiles 10-12 mm thick (square/rectangular) grade-4, area of each tile not exc 0.16 Sqm as in vertical surface such as dado/ skirting etc over and including 10mm thick screed bed in Cement mortar (1:4) in flooring, set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed by Engr-in-Charge.

M&L for joint free Non-skid ceramic coloured tiles 7-8mm thick (square/rectangular), area of each tile not exc 0.11 Sqm, over and including 15mm thick screed bed in CM (1:6) in flooring, set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed by Engr-in-Charge.

M&L for Glazed ceramic coloured joint free tiles 450x300X7mm in vertical surfaces over and including 10mm thick rendering in Cement mortar (1:4), set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed by Engr-in-Charge

M&L for Wall Cladding tile 7-8mm thick area of each tile exc 0.10 sqm but n.exc 0.20 Sqm of any colour and pattern set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick rendering on wall in CM 1:4 and surface finished even & fair Complete all as specified and as directed by Engr-in-charge.

M&L for 18-20mm thick granite (of any type) work (table rubbed and polished) stone slab as in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust to match with marble shade over and including cement screed bed 15mm thick in CM (1:6) complete all as specified and directed by Engr-in-Charge.

M&L Dura stone tiles of size 300x300x9-10mm thick as in floor over and including 15mm thick screed bed in Cement mortar (1:6), set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and as directed.

M&L for rubber moulded coloured cement concrete chequered tiles polished glossy finish of size 30cm x 30cm x 25mm thick jointed in neat cement slurry and pointed in white or coloured cement and pigment to match the surface of tile as in floor over 15mm thick screed bed in CM 1:6 complete all as specified and directed by Engr-in-Charge.

M&L for coloured Machine pressed precast polished glossy finish concrete interlocking paver block as in road berm, path and hardstanding any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade with pigments over and including 25mm thick sand cushioning complete all as specified and directed by Engr-in-Charge.

S&F 30mm thick factory made flush shutter solid core construction with block board core and ply wood face panels, commercial type both sides complete all as specified and directed by Engr-in-Charge.

S&F in repair powder coated aluminium glazed side hung double door shutters with anodised aluminium frame of section 100x44x1.5mm and shutter having style, top rail, lock rail and bottom rail of 84x44x1.5mm including 5.5mm thick tinted blind sheet glass ordinary quality with all necessary suitable push & pull plate/handle, screw, jointing cleats, rubber packing, aluminium snap beading and 1 No 200mm long Al tower bolt, 100 mm long 3 No Al butt hinges B-21 type, and one No mortice brass lock 100mm size 4 leaver (vertical type) complete all as specified and directed by Engr-in-Charge.

S&F Factory made 100% Solid WPC Brown door Frame (75mm x 50mm Single Rebate) made from 100% LEAD FREE (single extruded process) material with density 780 kg/Cum & Manufactured by an ISO: 9001-2015 certified company, all as per specification drawing as directed by the Engineer-in-Charge. The door frame should be Waterproof, Termite Proof, Fire Retardent and having excellent screw holding capacity complete all as specified and directed by Engineer-in-Charge.

S&F Factory made 100% Solid WPC Brown door Frame (100mm x 63mm Single Rebate) made from 100% LEAD FREE (single extruded process) material with density 780 kg/Cum & Manufactured by an ISO: 9001-2015 certified company, all as per specification drawing as directed by the Engineer-in-Charge. The door frame should be Waterproof, Termite Proof, Fire Retardent and having excellent screw holding capacity complete all as specified and directed by Engineer-in-Charge.

S&F Factory made 100% Solid WPC Brown door Frame (125mm x 63mm Double Rebate) made from 100% LEAD FREE (single extruded process) material with density 780 kg/Cum & Manufactured by an ISO: 9001-2015 certified company, all as per specification drawing as directed by the Engineer-in-Charge. The door frame should be Waterproof, Termite Proof, Fire Retardent and having excellent screw holding capacity complete all as specified and directed by Engineer-in-Charge.

S&F 24mm thick Moulded WPC Brown Factory made 100% Solid door (Conforming as Per IS:4020) made from 100% LEAD FREE single extruded with 2, 4 or 6 raised panel design on the front side with 10mm deep mould on single side with Wood Grain Texture and back side plain with density not less than 600 kg/cum. Manufactured by an ISO: 9001-2015 certified company. The door should be Waterproof, Termite Proof, Fire Retardent and having screw holding capacity complete all as specified and directed by Engineer-in-Charge.

S&F 30mm thick Moulded WPC Brown Factory made 100% Solid door (Conforming as Per IS:4020) made from 100% LEAD FREE single extruded with 2, 4 or 6 raised panel design on the front side with 10mm deep mould on single side with Wood Grain Texture and back side plain with density not less than 600 kg/cum. Manufactured by an ISO: 9001-2015 certified company. The door should be Waterproof, Termite Proof, Fire Retardent and having screw holding capacity complete all as specified and directed by Engineer-in-Charge.

M&L 30mm thick Factory made solid WPC (Wood Plastic composit) molded gauged door shutter with wire mesh in any number of division with brown wood grain texture, including S.S wire mesh shall be fixed with 15x15 square tube in side rails with screwing 8x28 heat metal zink coated screws can be remove or fix again after changing of wire mesh when needed. The density of the shall be as per manufacture instructuon complete all as specified and direced.

S&F Aluminium powder coated three track sliding windows (with three sliding shutters, (One with and incl stainless steel wire mess and two with and incl 4mm thick sheet glass panes) aluminium sections not less than 1.1kg per meter for bottom track and top track and side track 0.98 kg per metre, bottom shutter frame 0.55 kg per metre, top shutter frame 0.47 kg per metre, shutter sides, 0.47 kg per metre and interlock sides 0.45 kg per metre including suitable nylon beading channel gasket, nylon rollers Maruthi lock with handles etc complete all as specified and directed. Windows shall be provided with Grill made of 12mm MS Square bars welded to 25x4mm angle iron . Distance between bars should not be more than 100mm centre to centre. Total Grill and wire mess unit shall be powder coated.Assembling and installation of windows and ventilators shall be all as per details shown/mentioned on drawings and as per manufacturer‟s instructions complete all as specified and directed by Engr-in-Charge.

S&F anosided aluminum powder coated window and ventilator side hung type without sash bar aluminium sections weighing 0.55 kg/ m incl necessary joining cleat, glazing clips, rubber packing, anodised aluminium snap beading, screw, anodised aluminium fittings such as peg stay 150 mm long (1 No) hinges type B-21 100 mm long(2 Nos) Suitable handle (1 No.) complete all as specified and directed.

Providing and fixing powder coated aluminium (min thickness of powder coating 50 micron) work for door, windows and ventilators and partitions (fixed portion) with extruded built up standard tubular sections/ appropriate Z section of approved make incl necessary gap filling up the gaps at junctions with EPDM rubber/ neoprene gasket etc complete all as specified and directed.

S&F Aluminium powder coated fixed glazing with aluminium frame of weight not less than 1.2 kg/m with and incl 8mm thick glass (plain/ tinted) of size as directed by the Engineer-In-Charge including suitable nylon beading channel gasket, etc complete all as specified and directed by Engr-in-Charge.

S&F in repair 18mm thick WPC board one side prelaminated and other side plain white colour as in cup boad shutters and frames, kitchen cabinet front shutter, partion, shelf & drawer, fixed with screws, solvent cement/ adhesive complete all as specified and directed by the Engineer-in-Charge.

S&F in repair 18mm thick with LEAD FREE PVC Celuka ply of single side rigid laminate of approved color and other side plain white colour fixed with ss screws and solvent cement/ adhesive to make kitchen cabinet shutters complete as per manufacturer’s instructions complete all as specified and directed.

S&F 0.90mm thick Decorative laminate type 1, of surface finish, colour and pattern as approved , fixed with approved adhesive as per GE instructions, complete all as specified and as directed.

S&F of 100mm long mild steel butt hinges, medium weight cold rolled complete all as specified and directed by Engr-in-Charge.

S&F 150mm long, Aluminium barrel tower bolts complete all as specified and directed by Engr-in-Charge.

S&F Aluminium bow handle "D" type anodized 150mm long complete all as specified and directed.

S&F Aluminium bow handle "D" type anodized 100mm long complete all as specified and directed.

S&F of 250mm long (Length of bolt) Stainless Steel sliding door bolt with hasp, staple (bolt type) and fixing clips of sheets, and fixing bolts and sliding bolt complete all as specified and directed by Engr-in-Charge.

S&F 150mm Aluminium Hasp and Staple, including bolt to hinge plate and fixed with screws complete all as specified and directed by Engr-in-Charge.

S&F in repair Hydrulic Self Closing hinges 35mm of crank( KH-001) or 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters complete in all respect and fixed in position complete all as specified and directed by Engr-in-Charge.

S&F D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished 100mm long matt finished complete fixed in position all as specified and directed by Engr-in-charge.

S&F Ball catchers 304 grade stainless steel finished suitable for cabinets premium quality complete fixed in position as per manufacturer's instructions all as specified and directed by Engr-in-charge.

S&F in repair door closer aluminium (extruded section) body hydraulically regulated, designation No. 3, universal type, complete all as specified and directed by Engr-in-Charge.

S&F in repair 300mm long MS Helical ordinary rat tail rod pattern door spring including roller and roller plate etc complete of approved quality complete all as specified and directed by Engr-in-Charge.

S&F in repair of 140mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, Overall length of cover plate complete all as specified and directed by Engr-in-Charge.

S&F for Glazing with plain sheet glass, ordinary quality, 4mm thick and glazing with oil putty or aluminium or PVC beading in squares not exceeding 0.5 Sq.m in each pane complete in repair all as specified and directed.

S&F for Stainless steel curtain rod, 25mm dia with fixing brackets and decorative type knobs both side of each rod, incl taking down old curtain rod or pelmet boxes complete all as specified and directed by Engineer in Charge. Note :- Measurement will be taken between end point of knobs.

S&F Dust/Snake guard aluminium strip in doors of size 40x2mm with rubber at strip bottom complete all as specified and directed by Engr-in-Charge.

M&L 15mm thick rendering in cement mortar (1:6) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

M&L 15mm thick rendering cement mortar (1:4) mixed with liquid water proofing compound on fair faces of brick work or concrete surfaces, finished the surfaces even and fair without using extra cement complete all as specified and directed by Engr-in-Charge. (WPC shall be paid seperately)

M&L for 10mm thick plaster on roof, chajja and roof parapet of CM (1:3) on RCC finished even and smooth without using extra cement etc ncl taking down cement plaster complete all as specified and directed by Engr-in-Charge.

Supply only liquid water proofing compound complete all as specified and directed by Engr-in-Charge.

M&L for preparing new steel and iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint of any tint over one coat of red oxide primer complete all as specified and directed by Engr-in-Charge.

S&F for GI tubing 15mm bore, medium grade ISI marked with all fittings(such as bends, elbows, Tee short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions, including short lengths etc.) ( heavy grade ISI Marked) , fixed to walls, concealed in wall and ceiling or laid in floor complete complete all as specified and directed.

S&F for GI tubing 20mm bore, medium grade ISI marked with all fittings(such as bends, elbows, Tee short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions, including short lengths etc.) ( heavy grade ISI Marked), fixed to walls, concealed in wall and ceiling or laid in floor complete complete all as specified and directed.

Refixing old steel tubing of 15mm bore and connections in new or old position (walls, ceilings, floors etc.) together with all fittings heavy duty (ISI Marked ) (such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc.) and fixed complete to walls and ceiling with clips, wall hooks, wooden plugs or laid in floors Complete all as specified and directed

Refixing old steel tubing of 20mm bore and connections in new or old position (walls, ceilings, floors etc.) together with all fittings heavy duty (ISI Marked ) (such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc.) and fixed complete to walls and ceiling with clips, wall hooks, wooden plugs or laid in floors Complete all as specified and directed

S&F in repair 15mm dia gun metal gate valve with iron wheel haeded screwed both ends to iron pipe and fixed complete all as specified and directed by Engr-in-Charge.

S&F in repair 20mm dia gun metal gate valve with iron wheel haeded screwed both ends to iron pipe and fixed complete all as specified and directed by Engr-in-Charge.

S&F in repair 110mm dia PVC (SWR) pipe single socketed, in any length with rubber ring joints, laid in trenches/floor or fixed to wall including necessary clamps complete all as specified and directed by Engr-in-Charge.

S&F in repair 75mm dia PVC (SWR) pipe single socketed, in any length with rubber ring joints, laid in trenches/floor or fixed to wall including necessary clamps complete all as specified and directed by Engr-in-Charge.

S&F in repair 75mm dia PVC (SWR) Multi floor trap with grating including jointing with solvent cement including fixing waste pipe etc complete all as specified and directed by Engr-in-Charge.

S&F in repair PVC (SWR) junction single, (Single T) equal or unequal 110mm bore with access door complete all as specified and directed by Engr-in-Charge.

S&F in repair PVC (SWR) junction single, (Single T) equal or unequal 75mm bore with access door complete all as specified and directed by Engr-in-Charge.

S&F in repair PVC (SWR) bend any radius 110mm bore complete all as specified and directed by Engr-in-Charge.

S&F in repair PVC (SWR) bend any radius 75mm bore complete all as specified and directed by Engr-in-Charge.

S&F in repair PVC (SWR) bend any radius 110mm bore with access door complete all as specified and directed by Engr-in-Charge.

S&F in repair PVC (SWR) bend any radius 75mm bore with access door complete all as specified and directed by Engr-in-Charge.

S&F in repair PVC connection 15mm bore dia 450mm long with 2 Nos PTMT nuts with washer complete all as specified and directed by Engr-in-Charge.

S&F in repair PVC waste pipe 32/40 mm dia complete all as specified and directed by Engr-in-Charge.

S&F in repair CP Grating doom 125mm dia with waste hole of steel fixed on floor/nahani trap with cement mortar, complete all as specified and directed.

S&F in repair 20mm dia CP tubular towel rail D type 600mm long complete all as specified and directed by Engr-in-Charge.

S&F in repair CP bib tap 15mm bore fancy type screwed for iron pipe complete with wall flange complete all as specified and directed by Engr-in-Charge.

All as per item No.106 here-in-before but long body type complete all as specified and directed by Engr-in-Charge.

S&F in repair 15mm bore Stop valve fancy type, chromium plated with long shunk and cup (concealed type) high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specified and directed by Engr-in-Charge.

S&F in repair 15mm dia brass chromium plated pillar tap long body fancy type with fly nut capstan head screwed for 15mm bore dia of pipe complete all as specified and directed by Engr-in-Charge.

S&F in repair chromium plated brass shower roses with or without swivel joints 125mm size including shower arm complete all as specified and directed by Engr-in-Charge.

S&F in repair of Sink made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm and bowl size 410mm x 330mm x 160mm complete all as specified and directed by Engr-in-Charge.

S&F in repair wall mixer with over head shower chromium plated for mixing hot and cold water screwed for iron pipe suitable for 15 mm bore pipes complete all as specified and directed .

S&F in repair 15mm dia brass CP Sink mixer with swinging spout (wall mounted model) with connecting legs and wall flanges screwed down for iron pipe and fixed complete all as specified and directed .Note- Chromium plated fitting shall be brought in store yard first as approved by GE and will be issued subsequently for fixing at site.

S&F in repair 15mm dia chromium plated central hole wash hand basin mixer without PWS with 450mm BRAIDED HOUSE hose screwed down high pressure screwed for iron pipe completed all as specified and directed.

S&F in repair CP health faucet with 1m flexible tube and wall hook complete all as specified and directed by Engr-in-Charge.

S&F in repair CP angular stop cock chromium plated fancy type 15mm dia single way and fixed complete all as specified and directed by Engr-in-Charge.

S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed by Engr-in-Charge.

S&F in repair Corner self 300mm radius of 10mm thick toughened glass with CP railing with bracket S & Fixed with brass screw complete all as specified and directed by Engr-in-Charge.

S&F in repair Vitreous china wash hand basin including brackets, white size 550 x 400mm incl cutting cutting for and pinning in ends of brackets. Including Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other and fixed complete all as specified and directed by Engr-in-Charge.

S&F in repair Vitreous china squatting pan ‘Orissa pattern’ size 580x440mm white with integral foot rest including connection to trap, and flushing pipe, anti-syphonage pipe, etc and including lime concrete bedding complete all as specified and directed by Engr-in-Charge.

S&F in repair 10 Litre capacity PVC low level flushing cistern with ball valve and handle/push button 32mm dia PVC flush pipe including taking down unserviceable cistern complete all as specified and directed by Engr-in-Charge.

S&F in repair Vitreous china wash down water closed pan (Pedestal pattern) white, including connection to drain (or out going pipe) and to flush pipe, antisypthonic (excluding flushing cistern and flush pipe) complete all as specified and directed by Engr-in-Charge.

S&F in repair Vitreous china white wash down couple closet composite type including PVC soft seat cover white complete all as specified and directed by Engr-in-Charge.

S&F in repair seat cover suitable for vitreous china couple closet including fixing bolts complete all as specified and directed by Engr-in-Charge.

S&F in repairs PVC water storage tank triple layer cylindrical, vertical with closed top with threaded cover hoisted and fixed in position tank capacity 500 Ltr with and including ball valve high pressure of PTMT with epoxy coated Aluminum rod and high density plastic ball screwed for 20mm bore of iron pipe and making connection for inlet and outlet including dismantle of old water tank and removing from site complete all as specified and directed by Engr-in-Charge.

S&F in repairs PVC water storage tank triple layer white colour cylindrical, vertical with closed top with threaded cover hoisted and fixed in position tank capacity 1000 Ltr with and including ball valve high pressure of PTMT with epoxy coated Aluminum rod and high density plastic ball screwed for 25mm bore of iron pipe and making connection for inlet and outlet including dismantle of old water tank and removing from site complete all as specified and directed by Engr-in-Charge.

M&L for concrete in Sunken floor and vertical faces of walls to ease up about corners with cement concrete 1:2:4 type B0 (using 12.50mm stone aggregate) mixed with SBR Latex liquid polymer (mixed as per manufacture instructions & will be paid under relivnt item of Sch A) including using form work (straight or curved) as required complete as per directions by Engr-in-Charge.

M&L for providing cement concrete 1:2:4 type B-1 for fixing edge of interlocking tiles and rounded or chamfered edges, coping complete all as Specified and directed by Engr-in-Charge.

S&F false ceiling with Semi perforated 10mm thick Square edged GRG False Ceiling tiles at all heights with GRG (Glass Fiber Reinforced Gypsum) false ceiling tiles of size 595 x 595mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Nomocombustible as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120grams per Sqm incliuding both sides) comprising of main-T runners of size 15x32mm of length 3000mm, cross-T of size 15x32mm of length 1200mm and secondary intermediate cross-T of size 15x32 mm of length 600mm to form grid module of size 600 x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per Sqm) i.e. 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod up to 2000 to mm length and L-shape level adjuster os size 85x25x2mm. Galvanized iron perimeter wall angle of size 24x24x0.40mm of length 3000mm to be fixed on periphery wall/ partition with the help of plastic rawl plugs at 450mm centre to centre and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engr-in-Charge.

S&F in repair 5.5-6mm thick PVC heavy grade hollow profile designer sheet strips & channel feathered at edges of approved quality and design PVC Wall/Ceiling Panelling including matching PVC angles at all window corners, jambs & cills complete all as specified and directed by Engr-in-Charge.

Removal of existing roof treatment i.e. APP Membrane, brick tiling including concrete padding and benching and open up RCC roof slab including picking, sweeping cleaning with wire brush and washing down with water to remove dust, dirt to get surface free of laitance, scales, oil or any other loose material without damaging existing serviceable structure complete to receive new roof treatment including rubbish off the premises upto a distance exc 250 mtr but n.exc 500 mtr complete all as specified and directed by Engr-in-Charge.

M&L for PCC (1:2:4) Type B-0 (using 12.5mm graded stone aggregate) pedding mixed with liquid water proofing compound (as per manufacture direction and paid separately) over and incl one coat of cement slurry admixed with acrylic bonding compound SBR Latex liquid polymer as to be used for bonding of new concrete/mortar to old surface as per manufacturer direction and finishing the surface even and smooth (without usin extra cement) as in roof padding/Sunken floor, kerb/bencing alongwith parapet including rounded, chamfered on edges complete all as specified and directed by Engr-in-Charge. (Note : Proportion of mix and method of mixing of approved concrete admixture should be applied as per manufacturer's printed instructions)

M&L for rendering 10mm thick screed bedding in CM (1:3) mixed with acrylic bonding compound SBR Latex liquid polymer finished the surface even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge. (Note : Prpportion of mix and method of mixing of approved liquid water proofer admixture should be applied as per manufacturer's printed instructions)

M&L of water proofing treatment to non-accessible roof slab with APP based modified polymeric membrane as per manufacturer's instructions with following course of description below :- (i) Applying a priming one coat of bituminious primer evenly @ 0.30 Kg/Sqm till the surface is properly impregnated. (ii) Providing APP based 5 layer polymeric membrane minimum weighting 3.60 Kg/Sqm and minmum 3mm thick reinforced with polyester non-woven fabric matt (weight not less than 150 gms/Sqm) centre core laid on primed surface by forced applications as per the manufacturer's instructions with side over lap of 75mm and end overlap of 100mm. All overlap joints shall br sealed thoroughly by thermo fusing both the membrane layer (torching overlap by propane or butane gas torch) and sealing it with the help of hot trowel. The overlap joints shall be made as a monolithic layer. (iii) Apply two coat of bituminous aluminium paint @ 0.20 Kg/Sqm over APP Membrance. (Note: the work in respect of water proofing treatment shall be carried out only by authorized/approved applicator of the manufacturer/firms of app membrane. The contractor shall submitted 10 year company back warranty before claiming payments complete all as specified and directed. (Note : The work is required to be carried out at G+3 building. The contractor shall make arrangement of scoffolding , safety & security of workers and arrangement for approach to roof. The rates quoted shall deemed to be included for these iems.)

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5m deep in soft/loose soil for foundation, etc. or for shafts, wells, cesspits, manholes, pierholes, etc. and getting out complete all as specified and directed by Engr-in-Charge.

M&L for returning filling in soft/loose soil including spreading levelling watering and well ramming in layers n.exc 25 cm thick complete all as specified and directed by Engr-in-Charge.

M&L for removing excavated material (Soils) to a distance not exceeding 50 m and depositing where directed at a level n.exc. 1.5 m above the starting point complete all as specified and directed by Engr-in-Charge.

M&L 200mm internal dia of pipe salt glazed stoneware drain pipes grade 'A', laid in trenches and jointed in cement & sand mortar 1:1, incl demolition and breaking up drain pipes (SGSW) of 200mm bore complete all as specified and directed by Engr-in-Charge.

M&L for concrete bed in PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 200 mm bore pipe complete all as specified and directed by Engr-in-Charge.

S&F 150mm internal dia of pipe salt glazed stoneware drain pipes grade 'A', laid in trenches and jointed in cement & sand mortar 1:1, incl demolition and breaking up drain pipes (SGSW) of 150mm bore complete all as specified and directed by Engr-in-Charge.

M&L for concrete bed in PCC 1:3:6 type C-2 ( using 40 mm graded stone aggregate) as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150 mm bore pipe complete all as specified and directed by Engr-in-Charge.

M&L for Cleaning of blocked/filled W.C (any type) by roding the CI/SWG pipe of any dia upto first manhole/gully trap after taking off the cover and placing the same in position after cleaning and removing the waste material/sludge etc complete all as specified and directed by Engr-in-Charge.

Cleaning of Floor/Nahani/Gully trap washing with clean water up to Ist manhole after taking of manhole cover and placing the same in position after cleaning and removing the waste material/sludge etc complete all as specified and as directed by the Engr-in-Charge.

M&L for cutting into existing manholes for connecting new drains 150mm dia making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required complete all as specified and directed by Engr-in-Charge.

M&L for dewatering of soak well or sewage pit of any dia and depth by using pump and removal of sludge if any to a distance exc 1.5 Km but not exc 5 Km out of MOD land complete all as specified and directed by Engr-in-Charge.

M&L for Opening of manhole covers, taking out sludge from septic tanks, inspection chambers, man holes by removing sludge in solid, semi solid state or liquid state by pressure pump including removal of sludge to a distance exc 1.5 Km but n.exc 5 Km out of MOD land complete all as specified and directed by Engr-in-Charge. (Note:- Measurements will be taken only after dewatering of the septic tank) and no extra payment will be made for dewatering the same.

M&L for cleaning of SGSW Pipe 150mm internal dia of any depth by rodding or by using pressure pump completely including man holes and removal of sludge to a distance exc 1.5 Km and n.exc 5 Km out of MOD land complete all as specified and directed by Engr-in-Charge.

M&L for cleaning of SGSW Pipe 200mm internal dia of any depth by rodding or by using pressure pump completely including man holes and removal of sludge to a distance exc 1.5 Km and n.exc 5 Km out of MOD land complete all as specified and directed by Engr-in-Charge.

M&L for cleaning of SWG Pipe 100mm internal dia of any depth by rodding or by using pressure pump completely including man holes and removal of sludge to a distance exc 1.5 Km and n.exc 5 Km out of MOD land complete all as specified and directed by Engr-in-Charge.

M&L PCC 1:3:6 type C-2 (using 40mm graded crushed stone agg ) as in surface channel and drains complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old surface by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash on walls surface including salt, glue and blue etc. as required incl cleaning of glass panes, floor and plinth protection complete all as specified and directed by Engr-in-Charge.

All as per item No.147 above but two coats of white wash on wall surfaces complete all as specified and directed by Engr-in-Charge.

All as per item No 147 above but one coat of white wash on ceiling surface complete all as specified and direced by Engr-in-Charge.

M&L for preparation old surfaces of plastered or unplastered old decorated surfaces of walls by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of acrylic distemper on walls including cornices, pilasters etc complete all as specified and directed by Engr-in-Charge.

Ditto all as per item No.10 here in above but on ceiling surfaces complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old decorated surface of internal wall by removing existing treatment with mechanical sander (rpm 1500-2700) along with internal dust extraction system for clean environment certified by reputed paint manufacturers and applying two coats of acrylic distemper using roller over a layer of wall care putty to make the surface smooth all as specified and prescribed by manufacturer of paint and all as directed at site by Engr-in-Charge. Note:- (i) The old surface must be prepared in a manner so that there should not be any impression of dent and it should be made even and smooth all as per manufacture’s instruction before application of distemper. The cost of materials, labour & T&P required for preparation of surface are deemed to be included in the rates quoted. (ii). The work must be got executed through authorised applicator of manufacture after concluding an MoU with manufacture for company back guarantee by the contractor. The authorised applicator of manufacturer shall be got approved from GE before commencement of work. (iii). All the material to be incorporated in the work shall be brought by contractor to MES store yard which will be subsequently issued by department for incorporation in the work to ensure the quantity to be consumed all as per recommendation of manufacture. (iv). After carrying out preparation of surface the same shall be got approved from GE before application of distemper for each building. (v). The colour / shade will be all as approved by GE.

M&L preperation of old painted plastered or stone surfaces of any description and applying one coat of exterior emulsion paint (Apex) of asian paint or other equivelent as approved complete upto six storey height all as specified and directed b Engr-in-charge. Note : The work is required to be carried out upto Double storey building. The cost of scaffolding shall be deemed to be included in the item. The contractor shall also make necessary safety arrangement for labour

M&L for preparation of old decorated surface of exterior wall by removing existing treatment with mechanical sander (rpm 1500-2700) along with dust extraction system for clean environment certified by reputed paint manufacturers, then washing the surface with Bleaching powder solution for treatment of fungal growth and applying two coats of exterior anti fungal acrylic emulsion paint (wallmista of Berger paint or equitant in Asian paint, Nerolac etc having three years of performance warranty) over a coat of exterior water based primer of same make all as specified and prescribed by manufacture of paint and as directed at site by Engineer-in-Charge. Note:- (i) The old surface must be prepared in a manner so that there should not be any impression of dent and it should be made even all as per manufacture instruction before application of distemper. The cost of materials, labour & T&P required for preparation of surface are demand to be included in the rates quoted. (ii). The work must be got executed through authorised applicator of manufacture after concluding an MoU with manufacture for company back guarantee by the contractor. The authorised applicator of manufacturer shall be got approved from GE before commencement of work. (iii). All the material to be incorporated in the work shall be brought by contractor to MES store yard which will be subsequently issued by department for incorporation in the work to ensure the quantity to be consumed all as per recommendation of manufacture. (iv). After carrying out preparation of surface the same shall be got approved from GE before application of distemper for each building. (v). The colour / shade will be all as approved by GE. (vi) The cost of Scaffolding wherever required are deemed to be included in the rates quoted by the contractor.

M&L for preparation surface of old wall by washing,rubbing down and stopping of surfacest and applying one coat of cement base paint on walls complete all as specified and directed by Engr-in-Charge.

M&L for preparation surface of old wall by washing,rubbing down and stopping of surfaces incl complete removal of existing treatment and applying two coat of cement base paint on walls complete all as specified and directed by Engr-in-Charge.

M&L for preparation surface of old wooden surfaces over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engr-in-Charge.

All as per item No.157 above but applying two coat of synthetic enamel paint on wooden surfaces complete all as specified and directed by Engr-in-Charge.

M&L preperation of old painted steel and iron surfaces of any description not otherwise described over 10cm width of girth and applying one coat of synthetic enamel paint/Aluminium paint/Golden paint (any tint/shade) complete all as specified and directed by Engr-in-Charge..

All as per item No.159 above but applying two coat of synthetic enamel paint/Aluminium paint/Golden paint on steel surfaces complete all as specified and directed by Engr-in-Charge.

M&L for preparing old polished wooden surface over 10cm width or girth including filling the cracks with wooden filler, rubbing the surfaces to give smooth finish and applying one or more coat of french polish for high gloss finish complete all as specified and directed by Engr-in-Charge.

M&L for preperation of old plastered or concrete surfaces of any description and applying one coat of synthetic enamel paint complete all as specified and directed by Engr-in-Charge.

M&L preparation of new surfaces with 2mm thick wall putty and applying two coat of acrylic distemper over a coat of primer on walls complete all as specified and directed by Engr-in-Charge.

M&L two coats of cement based paint over a coat of primer to newly plastered surfaces of wall including preparation surfaces complete all as specified and directed.

M&L two coats of weather proof emulsion paint Apex in newly plastered surface over a coat of primer incl preparing the surface with 2mm thick wall putty complete all as specified and directed by Engr-in-Charge.

NOTES :- 1. For the items for which specifications not mentioned any where in the tender, the BIS specifications shall be followed.

sweety pest control (BID ID -3398807)

MAHTAB ALAM (BID ID -3391502)

M.K Engineers (BID ID -3389592)