SPECIAL REPAIRS TO EE HALL AND POWER HOUSE AT

Amount

Demolition of brick work including all quoins, archs, pillars,etc.built in cement mortor

Demolition of cement concrete in ground floor and paving n. exc. 15cm thickness below or above ground level un reinforced

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid and bedded and pointed in any mortar.

Demolition of un reinforced cement concrete as in padding from roof slab and removing the rubbish off premises all as directed.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for.

Dismantling boarding any description fixed in any position with screws all as specified

Dismantling of floor hearth or wall tilling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the permies.

Taking down cement or cement lime plaster any description on brick or stone wall/ celling including raking out joint , haking for key scrubing down with water etc.complete all as specified

Taking down chowkats or framewithout taking off shutter from the frame n exc 1.5 Sqm each all as specified

Taking down chowkats or framewithout taking off shutter from the frame exc 1.5 Sqm and n exc 4Sqm each all as specified

Taking down shutter of any description exc 1sqm n. exc 2sqm all as specified

Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth for laying/taking out of cables,CI/GI pipe lines and getting out in sooft/loose soil all as specified and directed.

Returning, filling in trenches including spreading, levelling watering and well ramming in layers not exceeding 25 cms in soil all as specified and directed by Engineer-in-Charge.

Removal of excavated material and deposited where directed at a distance not more than 50M from starting point and not more than 1.5M above ground level all as specified and directed.

M & L Sand cushioning to PVC cable with using clean dry and natural river sand gently punning below/around cable all as specified. Note : Punned thickness shall only be measured

M&L Cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in coping and like including weathering, slightly round or chamfered angles and throating as directed and including necessary use and waste of formwok complete all as specified

M&L Providing cement concrete type B-1, 1:2:4 using 20mm graded aggregate laid to stop 1:30 as in padding for WPT over roof slab complete all as specified and directed by Engineer-in-Charge.

M&L Providing cement concrete type B 0, 1:2:4 using 12.5mm graded aggregate in cover fillet of 75 mm radious at junction of roof slab and parapet wall etc complete all as specified and directed by Engineer-in-Charge.

Supply only intergral water proofing compound.

M&L Brick work sub class B bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 all as specified and as directed

M&L 2nd class hard wood 35mm thick Plain framed, panelled shutter(two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both face.The size of rail and style as per IS:1003(Part-I), klin seasoned and chemically pressed treated and all as Specified and as directed

S&F 100mm long butt hinges mild steel cold rolled and fixed to frame with scrwewd or welding comlete..

S&F 200mm long aluminium anodized barrel tower bolts of extruded section and fixed.

S&F 150mm long aluminium handle , cast type anodized.

S&F 300 mm length aluminium alloy anodized sliding door bolt with haps and staple (bolt type) and fixing clip of sheet cast or extruted section or cast aluminium alloy and fixed complete all as specified

S & F Aluminium die cast body door closer hydraulically regulated designation No 02 universal type suitable for shutter complete as specified.

M&L Aluminium powder coated (powder coated of required colour) three track sliding windows frame top & sides of size 92x31.75x1.50mm (section No 20831), bottom size 92x31.75x1.50mm (section No 20832) and shutter top & bottom of size 40x18x1.55mm (section No 20736) and sides (handle) of size 40x18x1.55mm (section No 20738) and lock side shutter frame of size 40x18x1.45mm ( section No 20737)" with rubber gasket, beading and locking arrangement including making good to the disturbed portion complete including stainless steel wire mesh 0.36mm nominal dia of wire with 1.40mm average aperture and fixed with stainless steel wire staples and fixing 5mm thick glass with necessary rubber beading gasket etc all as specified and as directed by Engr-in-charge

S&F Aluminium powder coated door having frame of section 100x44mm and 2.5mm thick and shutter with bottom rail of section 150x44.5mmx2.5mm thick middle rail of section 85x44.5mmx2.5mm thick & top rail of section 80.4x44.5mmx2.5mm thick and styles of section 80.4mmx44.5mmx2.5mm thick with 5mm thick glass(plain/tinted/with laminated film) or prelaminated board fixed in position with aluminium beading incl necessary rubber gaskets and 2Nos aluminium push plate handle of aluminium section 150mm wide & 2.5mm thick incl 150mm aluminium tower bolt, brass mortic lock complete all as per Drg No CEAA/TD/63 sheet No 2.2 (floor spring/ hydraulic door clooser to be measured and paid seperatly)

S&F Framed work such as grills, gratings etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways ; railings framework or water tanks and similar work conforming to Fe 290 Gde -E- 165 complete all as specified

S&F GI wire netting 0.90mm dia and 12mm mesh lathing to concrete or brick surface, studding, joists, etc. in walls, ceilings,stanchions, beams, etc. including all laps, cutting and waste all as specified and as directed.

Surface excavation n exc 20cm depth over roof surfaces and removing the excavated material and dumping on a levelled ground and refilling in same earth in layer on roof after water proofing treatment to excavated surfaces all as specified and as directed by Engineer in charge.

Removing of existing unserviceable water proofing treatment including PCC tiles (except padding) and cement mortar bedding/ plaster etc, of any description and cleaning of top surface of cement concrete flushing out junction of parapet walls & washing down with water to remove all dirt etc including preparation of surfaces to receive new treatment and removing the rubbish off premises as directed

M&L Applying cold bituminous primer @ 0.30 Ltr / Sqm conforming to IS 3384 laying APP polymer modified membrane 3.6 to 4.0 Kg/Sqm in weight with non-woven polyster reinforcement (plain finish on upper side of the membrane) and sealing all overlaps of 100mm in length side and 150mm on width side of membrane by torching the same as per manufacture instruction and all as per specified particular specification and including 10mm thick screed bed in CM 1:3 mixed with WPT 3% by weight of cement incl one coat of aluminium paint all as specified and directed by Engineer in Charge.

M&L 12mm thick perforated particle board tiles 60x60cm in size for insulation and accoustic purpose fixed with screws to timber frame works or with staple with snap grid wall or ceiling all as specified and as directed.

M&L False ceiling at any height with 600 x 600 x 15 mm mineral fibre ceiling tiles RH-99 of type micro looks edge laid on super fine XL 15 mm exposed grid systems with 15 mm wide T-section flanges. The frame work comprises of main runner of size 15 x 32 x 3000 mm spaced at 1200 mm centre securing fixed to the structural soffits by approved hangers at 1200 mm maximum centers. Hangers (GI wire of 4.0 mm dia) to be fixed by approved roof plug, level adjusters and screws etc. The last hanger at the end of each main runner should not be greater than 450 mm from the adjacent wall flush fitting 1200 mm long cross tees of size 15 x 26 x 1200 mm to be interlocked between main runners at 600 mm centers to form a 1200 mm x 600 mm module. Cut cross tees longer than that 600 mm to be supported independently. 600 mm x 600 mm modules to be formed by fitting 600 mm long flush fitting cross tees of size 15 x 26 x 600 mm centrally between the 1200 mm crosstees perimeter wall angle of size 19 x 19 x 3000 mm secured to wall at 450 mm maximum centres. Finally RH-99 mineral fibre tiel 15 mm thick micro look edge has to be laid on the 600 mm x 600 mm module complete all as specified and as directed

M&L 50mm thick PCC 1:2:4 type B0 (12.50mm graded aggregate) as in levelling course.using WPC by wt of 3% of cement.all as specified and as directed by Engineer-in-Charge. Note:- WPC will be measured and paid seperatly in relevant item.

M&L 75 mm thick PCC 1:3:6(40 mm graded aggregate) type C-2 as in plinth protection finished even and smooth without using extra cement complete all as specified

M&L PCC 1:2:4 type B1 (20mm graded aggregate) as in floor of 75mm thick finished even and smooth using extra cement.

M&L Vitrified ceramic tiles 600mmx600mmx10mm thick light shade(square) as in floor etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L Vitrified ceramic tiles 10mm thick light shade (square/ rectangular) as in skirting etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L Machine cut Kota stone slab 20-25mm thick bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of slab including cutting and mirror polishing and nosing or edge of slab in shelves, platform, riser or treaded of stair complete all as specified and directed in Engineer -in -Charge.

M&L Machine cut Kota stone slab 20-25mm thick bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of slab including cutting , nosing and mirror polishing as in skirting all as specified and directed in Engineer -in -Charge.

M&L Cutting and polishing of kota stone flooring by machine including wax polishing in floor etc complete all as specified and as directed.

M&L Rendering 10mm thick on fair faces of concrete or block masonary CM 1:6 finished even and smooth without using extra cement in internal surface of wall mixed with water proofing compound 3% by weight of cement all as specified and as directed by Engineer in Charge Note:- WPC will be measured and paid in relevant item of this schedule.

M&L Rendering 5mm thick with CM 1:4 as in ceiling finished even and smooth without using extra cement mixed with water proofing compound 3% by weight of cement all as specified and as directed by Engineer in Charge . Ceiling height shall be 3.4 mtr to 6mtr form the floor. . Note:- WPC measured and paid in relevant item of this schedule.

M&L Rendering in two layer, 10mm thick on concrete or block masonary with CM 1:6 and second layer 5 mm thick with CM1:4 mixed with waterproofing compound @ 3% by weight of cement finished even and smooth without using extra cement complete all as specified and as directed by Engineer in Charge Note:- WPC measured and paid in relevant item of this schedule.

M&L Rendering 10mm thick on fair faces of concrete or block masonary/brick masonary CM 1:6 finished even and smooth (without using extra cement) of wall all as specified and as directed

M&L 15mm thick screed bed or bedding layer of cement mortar 1:6 for laying floor finishes

M&L Preparation of new plastered surface of wall and applying two coats of distemper oil emulsion over sufficent coat of Birla wall care putty complete all as specified

M&L Complete removal of existing treatment of wall surface and applying two coat of distemper oil emulsion over sufficient coat of Birla wall care putty complete all as specified.

M&L Preparation of new plastered surface of ceiling and applying three coats of white wash complete all as specified.

M&L Preparation of old plastered/ concrete surface of ceiling and applying two coats of white wash complete all as specified.

M&L Preparation of new plastered surface of wall and applying two coats of Acrylic emulsion paint over a coat of primer.

M&L Complete removal of existing treatment of wall surface and applying two coat of Acrylic paint over a coat of alkali resistant primer complete all as specified

M&L Preparation of new steel surface of any description over 10cm width or grith not otherwise described and applying two coats of synthetic enamel paint ovear a coat of zinc chromate primer complete all as specified

M&L Preparation of old steel surface of any description over 10cm width or grith not otherwise described and applying two coats of synthetic enamel paint complete all as specified

M&L Preparation of old wooden surface of any description over 10cm width or grith not otherwise described and applying two coats of synthetic enamel paint complete all as specified

M&L Preparation of new wooden surface of any description over 10cm width or grith not otherwise described and applying two coats of synthetic enamel paint ovear a coat of primer complete all as specified

Taking down carefully unserviceable old copper / Aluminium point wiring including (light, fan, socket or power complete fittings, such as switches, ceiling roses, pendant holders, Batten holders, shades conical fan regulators, light or power sockets etc) removing materials from site and making good disturbed surfaces of walls roofs etc all as directed.

Taking down carefully unserviciable main switch and DB's including MCBs of any size make, type and capacity as directed.

Taking down carefully un serviciable light fittings of any size make type and capacity as directed.

M/L Point wiring complete with 1.5 sqmm single core PVC insulated and PVC unsheathed FRLS multistranded copper conductor cable 1100 volt grade enclosed in and including PVC casing and capping with accessories fixed on surface on walls/ceiling by means of PVC sleeves Dash fastners and cadmium plated screws all as per ISI including sunk type boxes for mounting fitting like switches, socketes fan regulators with 3 mm thick phenolic Laminated sheet top covers concealed in walls etc including 1.5 Sqmm single core multi stranded copper conductor PVC insulated and unsheathed cable as earth continuity conductor to common earth dolly complete all as specified

(a) One light/ Fan point controlled by one one/way switch.

(b) One 3 pin 5 Amps switch socket outlet on same board

(c) One 3 pin 5 Amps switch socket outlet on independent board with cable of 1.5 sqmm size.

(d) One bell point controlled by one way switch

(e) One light point controlled by two way switches

All as per item No.59 here in before but wiring with 2.5 sqmm multistranded copper conductor unsheathed and 2.5 sqmm copper conductor unsheathed cable as earth continuity conductor for one 3 pin 15 Amps switch socket outlet point on independent board.

S&F LED Tube light fitting 4 feet' ENERGY Efficient 20 Watt and above lumen bright light with 25000 and above burning hours including testing complete as in repairs all as directed by Engr-in-charge.

S&F Recess mount LED SQ LW 02 Square 2x2 36 watt LED ceiling light fittings suitable for ceiling fitting& connecting with 23/0.0076 3 core flexible cable including testing , as in repairs complete all as specified and directed.

S&F Switch piano flush type single pole one way 5 Amp 240 Volts complete all as specified

S&F Switch piano flush type single pole two way 5 Amp 240 Volts as complete all as specified

S&F Switch socket combination 2 in 1, 3 pin, 5 Amps flush type 240 Volt complete all as specified

S&F Switch socket combination 3 pin 5 and 15/16 Amp 2 in one flush type complete all as specified

S&F Socket type stepped electronic fan regulator heavy duty typeA/C 240 V complete as in repairs all as specified and directed.

S&F Bell ding dong type, one way, 240 volts, AC,single pole ISI marked.

S&F Factory made epoxy polyester powder coated indoor distribution board SP & N 8 way fabricated from minimum 1.6 mm thick CRCA sheet with metal double door (IP-43 protection ) fixed flush to wall and suitable for universal mounting and including 100 Amps copper bus bar, Neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with knockouts and suitable for one DP MCB as incomer and outgoings MCBs complete all as specified and conforming to IS: 8623 alongwith cable end box for above DB all as specified and directed. NOTE (a) MCBs shall be measured and paid separately. (b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of Sch.

S&F Factory made epoxy polyester powder coated outdoor distribution board TP & N 4 way (VTPN DB) with metal door (IP-43 protection) fabricated from minimum 2.0 mm thick CRCA sheet and fixed on wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with provn for DPX 160, 4 pole MCCB/TPN and ELM as incommer and outgoing MCBs as required at site complete all as specified and conforming to IS: 8623 along with cable end box complete all as specified and directed. NOTE :- (a) MCCBs and MCBs shall be measured and paid separately. (b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of Sch.

S&F MCB 6 to 32 Amp 9 KA rupturing capacity conforming to IS-8828 complete as in repairs all as specified and directed.

S&F MCB SPN 40 Amp 9 KA rupturing capacity conforming to IS-8828 complete as in repairs all as specified and directed.

S&F MCCB 100 Amps 4 Pole 16 KA rupturing capacity conforming to IS-8828 o complete as in repairsall as specified and directed.

S&F Ceiling fan 1200 mm sweep three blade, hanging rod, and including all necessary fittings, 1200 mm (white) colour BEE 5 star rating including taking down of old celing fan and deposited in MES store all as directed by Engr-in-Charge.

S&F Exhaust fan 300 mm 1400 RPM with back louvers metal body AC 230 Volt 50 Hz and with 3 core flexible wire for connecting including fixing on existing suitable size of hole for fixing on wall making with good finished surface all as specified including taking down old unserviciable anddeposited in MES store yard. all as directed by Engineer-in-Charge

Supply, install, testing & commissioning submersible openwell horizontal pump 5 HP capacity electric driven 415 V 3 phase head 12 meter at 850 LPM discharge, column pipe size 50 mm bore bronze impeller, graded cast iron pump bowl stainless steel motor casing, stainless steel pump shaft, stainless steel motor shaft including connection with pump starter all as specified and directed by Engr-in-Charge.

Supply, install, testing & commissioning submersible openwell horizontal pump 3 HP capacity electric driven 415 V 3 phase head 12 meter at 500 LPM discharge, column pipe size 50 mm bore bronze impeller, graded cast iron pump bowl stainless steel motor casing, stainless steel pump shaft, stainless steel motor shaft including connection with pump starter all as specified and directed by Engr-in-Charge.

Supply and laying or fixing or passing through PVC pipe 1100 volts grade heavy duty submersible cable with PVC insulated 6 sqmm 3 core unarmoured copper conductor including connections complete all as specified and directed.

Supply , laying and testing 50 mm bore, GI tubing medium grade including all fitting (ISI marked) laid in trenches/ fixed to wall/ fixed on pillars complete in repairs all as specified and directed.

Supply , laying and testing 100 mm bore, GI tubing medium grade including all fitting (ISI marked) laid in trenches/ fixed to wall/ fixed on pillars complete in repairs all as specified and directed.

S&F Gun metal globe / gate valve, 50mm bore,screwed down high pressure with iron wheel head, screwed both ends for GI/PPR pipe including all fittings / fixtures like nipple, union etc complete in repairs all as specified and directed.

S&F Submersible pump DOL starter of capacity 5 HP 415V 3 Phase complete in repairs all as specified and directed.

Supply ,laying and testing 95 Sqmm 3.5 coreXLPE insulated armoured heavy duty electric cable with aluminium conductor cable 1100 volts grade in trenches ducts, pipe on walls, poles etc including taking down old unserviceable cable complete all as specified and directed.

Supply ,laying and testing 70 Sqmm 3.5 coreXLPE insulated armoured heavy duty electric cable with aluminium conductor cable 1100 volts grade in trenches ducts, pipe on walls, poles etc including taking down old unserviceable cable complete all as specified and directed.

Supply ,laying and testing 50 Sqmm 3.5 coreXLPE insulated armoured heavy duty electric cable with aluminium conductor cable 1100 volts grade in trenches ducts, pipe on walls, poles etc including taking down old unserviceable cable complete all as specified and directed.

Supply ,laying and testing 16 Sqmm 2 core XLPE insulated armoured heavy duty electric cable with aluminium conductor cable 1100 volts grade in trenches ducts, pipe on walls, poles etc including taking down old unserviceable cable complete all as specified and directed.

Supply, install testing and commissioning weather and vermin proof LT feedar pillar box (Panel board) CPRI approved,factory fabricated outdoor type totally enclosed made out of 3.15 mm thick sheet metal enclosure of suitable size, with angle iron frame of MS angle 50 X 50 X 6 mm suitable for operation on 3 phase 4 wire, 440 volts 50 Hz system, with hinged panel doors (covers) on two sides with handles, bottom gland plate and locking arrangement consisting of suffiecient Nos of circular cable entry holes at bottom only with suitable of sufficient Nos of circular cable entry holes at bottom only with suitable PVC/rubber/wooden bushes to prevent ingress of water/vermin etc, inside the enclosure, the required Nos of holes to be fixed with chromium plated brass cable glands for cable entry and exit complete with necessary internal wiring with stranded copper conductor PVC insulated cables of adequate size, duly powder coated (15 micron) grey hammer tone with one coat of including connecting with LT armoured incoming and outgoing cables and including required sizes of cable lugs of aluminium complete as in repairs all as specified and directed and consisiting of following :-

(a) Aluminium bus bar of 250 Amp current rating capacity, minimum 600 mm long or of length as actually required at site for 3 phase and half size for neutral, mounted on epoxy/FRP bus bar insulator - 01 set

(b) MCCB 160 Amps 4 Pole 36 KA, 415 V - 01 No. for incoming.

(c) MCCB 100 Amps 25 KA 4 pole, 415 V - 02 for outgoing

(c) MCCB 63 Amps 16 KA 4 pole, 415 V - 01 for outgoing

(f) LED type indicator lamp Red/Yellow/Blue colour-01 set

(g) Internal wiring with copper conductor incl necessary lugs and thimbles.

S&F 4 Pole MCCB 200 Amp, 50 Hz, 415 V with rupturing capacity 35 KA complete as in reairs all as specified and directed.

S&F 4 Pole MCCB 100 Amp, 50 Hz, 415 V with rupturing capacity 25 KA complete as in reairs all as specified and directed.

S&F Aesthetically designed LED security light luminiareis of 30 Watts system wattage for energy saving having IP 66 degree of protection,with min system efficiency as>85%,made of pressure die casting aluminum housing power coated in graphite grey and heat resistant toughened glass with excellent thermal management LED shold have lens optics and uniform distribution of light fitting should have operating voltage range of 120-270 VAC,THD<10%,P.F>.95 complete in repairs all as specified and directed.

S&F Asthetically designed LED flood light of 200 watts Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium IP66 flood light, suitable for highlighting architectural facade and general purpose lighting made of pressure die cast aluminum housing powder coated and heat resistant thoughned glass with fins for thermal dissipation LED should be fitted on MCPCB and provision of cradele /clamp for mounting purpose fitting should have THD less than 10% P.F more than 0.95 complete in repairs all as specified and directed.

Supply and laying unreinforced precast concreate cable cover,Class LV type 1 flat size 250mmx150mmx40mm all as directed.

Shiv Kripa Tradimg