Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.0 LAccepted-AOC | L1 | Accepted-AOC Accepted Vide Resolution No.2(1) dtd.02-05-2025 of Vadavucode Puthencruz Grama Panchayat | |
| 2 | L2₹5.9 L+₹71,532.64 (13.7%)Rejected-AOC | L2 | Rejected-AOC Higher rate and hence not admitted |
Tender Value
₹5.4 L
EMD Value
₹13,599
Closing Date
28 Apr 2025, 6:00 pmClosed
SANTHOSH KN
Vadavucode Puthencruz GP
Retender-PTZ S0312/25 Veloor Canal Bund Road retarring in ward 13 of Vadavucode Puthencruz GP-Under annual plan 2024-25
2025_LSGD_760598_7
04/ET/2024-25/AE/LID EW/PTZ
Open Tender
Civil Works - Roads
Item Rate
180 days
Vadavucode Puthencruz GP
Please refer Tender documents.
9 documents required · 9 mandatory
₹1,200
Yes
₹13,599
Yes
30 May 2025
21 Apr 2025
30 Apr 2025
21 Apr 2025
28 Apr 2025
21 Apr 2025
Amount
Road Retarring and Tile paving
75.5.5.A.1pb:Modified Penetration Macadam 50 mm thick using Bitumen S-65 - Packed Bitumen Rates Construction of penetration macadam over prepared base by providing a layer of compacted crushed coarse aggregate using chips spreader with alternate applications of bituminous binder and key aggregates and rolling with a three wheel 80-100 kN static roller to achieve the desired degree of compaction as per Technical Specification Clause 506.
75.5.5.B.2pb:Modified Penetration Macadam 75 mm thick using Bitumen S-65 - Packed Bitumen Rates Construction of penetration macadam over prepared base by providing a layer of compacted crushed coarse aggregate using chips spreader with alternate applications of bituminous binder and key aggregates and rolling with a three wheel 80-100 kN static roller to achieve the desired degree of compaction as per Technical Specification Clause 506.
75.5.2.1pb:Tack Coat - With Packed Bitumen Rates Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.20 to 0.25 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503.
75.5.11.1.A.2pb:Mix Seal Surfacing - Manual Means - Type A - Bitumen S-65 - Packed Bitumen Rates Providing, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.9 mm (Type-A) or 13.2 mm to 0.9 mm (Type-B) aggregates using penetration grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 kN static roller and finishing to required level and grades as per Technical Specification Clause 509 By Manual Means Type A (II) Bitumen (S-65)
2.7.D:Dismantling Stone Masonry as per Technical Specification Clause 202. Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of stone masonry, including disposal of unserviceable material and stacking the serviceable material with all lift and lead of 1000 m as per Technical Specification Clause 202. (D) Dry Rubble Masonry
3.5.1:Excavation in Cutting in Soil by manual means with lead upto 50 m Excavation for roadway in soil using manual means for carrying of cut earth to embankment site with a lift upto 1.5 m and lead upto 50 m as per Technical Specification Clause 302.3
OD10989/2025-2026:DR with departmental stone - DRY RUBBLE MASONRY _ Dry rubble without concrete levelling course masonry with good quality blasted rubble including packing to compactness to lines and levels cost and conveyance of all materials labour charges etc. complete as per direction of Departmental officers at site
OD10987/2025-2026:Dry rubble masonry - Dry rubble masonry with good quality blasted rubble including conveyance of material and labour charges etc. complete as per direction of departmental officers at siteModified 60.7.1
75.8.1.1:Providing plain/reinforced concrete(1 cement:2 fine aggregate: 4 course aggregate) forsubstructure as per drawings and technical specifications Clause 802, 803, 1202 & 1203as required including compaction, finishing and tamping etc .complete. Max. size ofcourse aggregate not exceeding 25mm , mixed in concrete mixer etc complete as perspecification (i) Nominal mix (1:2:4)
11.8:Supplying, fitting and placingTMT bar reinforcement in foundation complete as per drawings and technical specifications Clauses 1000 and 1202
OD10988/2025-2026:Filling With contractors own Eatrh( Excluding Rock),trenchs ,plinth, sides of Foundations, etc. in layers not exceeding 20 cm in depth consolidating earth deposited layer by ramming, and Watering, Lead upto 50 mts and Lift upto 1.50 mts as per direction of site Engineer in Charge
OD10984/2025-2026:Gravel/Soil-Aggregate Surface Course (Table 400.3)<br> Construction of granular surface course by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method complete as per Technical Specification Clause 402 (modified 4.3)
OD10985/2025-2026:Providing Plain cement concrete for ROAD WORK EXCLUSIVE OF FORMWORK CC 1:2:4 (1 cement: 2 fine aggregate: 4 course aggregate) laid to required slope and camber in panels (@ 3 m c/c) as required including compaction USING NEEDLE VIBRATOR, finishing and tamping etc .complete. Max. size of course aggregate not exceeding 25mm , mixed in concrete mixer etc complete as per specification (i) Nominal mix (1:2:4) Modified 75.8.1
OD10986/2025-2026:Tubular Steel Railing with 50 mm dia GIpipe Providing, fixing and erecting 50 mm dia steel pipe railing in 3 rows ,fixed with 50 mmdia steel pipe post 0.90m high above ground, 2 m centre-to-centre,duly painted on , complete as per approved drawings Clause 1706
Basil Paul Raju K (BID ID -2201432)
Bidder Name
C A MAKKAR
Basil Paul Raju K
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1236746.pdf
boq_comp_chart.xlsx
xlsx
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .