Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.2 LAccepted-AOC | L1 | Accepted-AOC ACCEPTED | |
| 2 | L2₹1.2 L+₹2,992 (2.47%)Rejected-AOC | L2 | Rejected-AOC ACCEPTED |
| Sl No | Description | Qty | Unit | RAHUL C M L1 | RAGESH C M L2 |
|---|---|---|---|---|---|
| 1.00AE OFFICE RENOVATION | |||||
| 1.00 | OD508801/2025-2026:Storage with Laminate on oneside Finish :(Window & Door frames)
Providing & placing Storage as per architect approved drawing (wide 45cm).
Storage frames finished with 19 mm thick Plywood (Calliberated 710
Grade plywood/ Equivalent) .9 mm plywood (Calliberated 710 Grade plywood/
Equivalent) to be fix on the back side of the storage .outer portion of the Storage to be
finished with 1 mm laminate sheet (Greenlam lam/equivalent),inner portion of the
storage to be finished with 0.8 mm laminate sheet (Greenlam lam/equivalent) as per
drawing.Hardware & Fittings: SS 304 grade,Make
:Hettich/Haffele/Equivalent.Finish as per drawing with necessary grooves, projections
& electrical openings if any.Including cost and conveyance of all materials
labour charges etc.. | 11.65 | sqm | 1,984.94 ₹23,118.6 Lowest | 1,985 ₹23,119.3 |
| 1.00 | 12.45.3:Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with:12.5 mm thick tapered edge gypsum moisture resistant board | 27.76 | sqm | 1,497.97 ₹41,583.65 Lowest | 1,600 ₹44,416 |
| 1.00 | OD524530/2025-2026:Toughened Glass Partition: Providing and fixing 12 mm toughenedglass using SS patch fittings (Dorma Crown /equivalent) upto a heightof 1550 mm or as per site condition .Including all cost andconveyance of materials, labour etc complete | 4.5 | sqm | 5,575.1 ₹25,110.25 | 5,575 ₹25,109.8 Lowest |
| 1.00 | OD524531/2025-2026:Providing and fixing 12 mm thick frameless toughened glass doorshutter of approved brand and manufacture, including providing andfixing top & bottom pivot & spring type fixing arrangement andmaking necessary holes etc. for fixing required door fittings, allcomplete as per direction of Engineer-in-charge | 2.06 | sqm | 12,115.92 ₹24,934.56 Lowest | 12,150 ₹25,004.7 |
| 1.00 | 13.52.2:Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On concrete work | 3.78 | sqm | 228.54 ₹863.88 Lowest | 230 ₹869.4 |
| 1.01 | 13.53.1:Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to given an even shade:New work (two or more coats) including coat of approved steel primer but excluding a coat of mordant solution. | 10.8 | sqm | 173 ₹1,868.4 Lowest | 180 ₹1,944 |
| 1.01 | 14.6.2:Renewing glass panes, with wooden fillets wherever necessary:Float glass panes of thickness 5.5 mm (weight not less than 12.5kg/sqm) | 1.8 | sqm | 1,905.48 ₹3,429.86 Lowest | 1,910 ₹3,438 |
Tender Value
₹1.2 L
EMD Value
₹3,023
Closing Date
10 Sept 2026, 11:00 amClosed
ASSISTANT ENGINEER ,MOODADI GP
ASSISTANT ENGINEER ,MOODADI GP
MAINTENANACE
2026_LSGD_867308_31
AE/MDY/TENDER/01/P/2026-27
Open Tender
Civil Works - Roads
Item Rate
MOODADI
Please refer Tender documents.
8 documents required · 8 mandatory
₹555
Yes
₹3,023
Yes
26 Sept 2026
3 Sept 2026
12 Sept 2026
3 Sept 2026
10 Sept 2026
3 Sept 2026
3 Sept 2026 - 8 Sept 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1AE OFFICE RENOVATION | |||||
| 1.001 | OD508801/2025-2026:Storage with Laminate on oneside Finish :(Window & Door frames)
Providing & placing Storage as per architect approved drawing (wide 45cm).
Storage frames finished with 19 mm thick Plywood (Calliberated 710
Grade plywood/ Equivalent) .9 mm plywood (Calliberated 710 Grade plywood/
Equivalent) to be fix on the back side of the storage .outer portion of the Storage to be
finished with 1 mm laminate sheet (Greenlam lam/equivalent),inner portion of the
storage to be finished with 0.8 mm laminate sheet (Greenlam lam/equivalent) as per
drawing.Hardware & Fittings: SS 304 grade,Make
:Hettich/Haffele/Equivalent.Finish as per drawing with necessary grooves, projections
& electrical openings if any.Including cost and conveyance of all materials
labour charges etc.. | - | sqm | - | - |
| 1.002 | 12.45.3:Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with:12.5 mm thick tapered edge gypsum moisture resistant board | - | sqm | - | - |
| 1.003 | OD524530/2025-2026:Toughened Glass Partition: Providing and fixing 12 mm toughenedglass using SS patch fittings (Dorma Crown /equivalent) upto a heightof 1550 mm or as per site condition .Including all cost andconveyance of materials, labour etc complete | 1 | sqm | - | - |
| 1.004 | OD524531/2025-2026:Providing and fixing 12 mm thick frameless toughened glass doorshutter of approved brand and manufacture, including providing andfixing top & bottom pivot & spring type fixing arrangement andmaking necessary holes etc. for fixing required door fittings, allcomplete as per direction of Engineer-in-charge | 1 | sqm | - | - |
| 1.005 | 13.52.2:Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On concrete work | 1 | sqm | - | - |
| 1.006 | 13.53.1:Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to given an even shade:New work (two or more coats) including coat of approved steel primer but excluding a coat of mordant solution. | - | sqm | - | - |
| 1.007 | 14.6.2:Renewing glass panes, with wooden fillets wherever necessary:Float glass panes of thickness 5.5 mm (weight not less than 12.5kg/sqm) | - | sqm | - | - |
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1468812.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.29 MB
Tendernotice_2.pdf
PDF • 0.25 MB
Tendernotice_3.pdf
PDF • 0.26 MB
Tendernotice_4.pdf
PDF • 0.24 MB
Tendernotice_5.pdf
PDF • 0.24 MB
Tendernotice_6.pdf
PDF • 0.24 MB
Tendernotice_7.pdf
PDF • 0.97 MB
BOQ_1468812.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .