Construction of 2500 MTs Grain Storage at Mirhama Kulgam B.W.O Electric work

Supply, Installation, Testing and Commissioning of 100W (Havells/ PhillIps/Wipro skyline/ eq. make to be approved by EIC ) new generation energy saving and environmental friendly long life L.E.D Flood Light made up of pressure die cast Aluminum housing with high efficiency LEDs as lighting source with efficacy >110lm/w ,CRI>80 ,CCT>5000 ,Avg Life L70 50000 hours ,No haremful UV and IR radiators, Operating Temp -10 to 45C ,Surge Voltage Protection, IP66 Protection and impact resistance of IK07.The job includes replacement warranty of fixture if damaged/ burnt out what so ever reason for a period of two years reckoned from the date of successful commissioning/ handing over of site to the intending department.

Supply, Installation, Testing and Comm. Of 300mm sweep exhaust fan industrial type (Carbon steel) of havell /Bajaj/ Crompton/equivalent make as directed by engineer incharge,04 No. blades, min air deivery 1600m3/Hr, 60-70Watts, 1300-1400 rpm,water resistant, including making of space in wall/ window as per site requirement and necessary connections.The job includes replacement warranty of fixture if damaged/burn out what so ever reason for a period of two years reckoned from the date of sucessful commissioning / handing over of site to the intending department.(To be got approved before installation from EIC)

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch connections etc. as required.( Anchor roma plus/Legrand Mylinc /SSK/Schneider Zencelo /Crabtree athena / eq. make to be approved by EIC).

Supplying and fixing of GI box along with modular base and cover plate for modular sockets, switches in recess etc as required 6 module (200mm x 75mm)

Supplying and fixing of 5pin 5-10A socket and 5-10A switch on existing modular plate, incl connections etc as required. (Havells/SSK/Anchor/ABB/Schneider/ eq. make to be approved by EIC)

Wiring for light/power plug points (15/16A heating points) with 2x4 sq mm FRLS PVC insulated flexible stranded copper conductor wires in recessed or surface medium class PVC conduit along with 1x4 sq. mm FRLS PVC insulated copper conductor single core cable for earthing, etc. as required.(Havells/ Polycab/ Anchor/ SSK/KEI/RR or equivalent make ) including the cost of conduit.

Wiring for 5-10A socket out lets and Flood lights exhaust fans with 2X2.5 sq. mm FRLS PVC insulated copper conductor (Havells/ Polycab/ Anchor/ SSK/KEI/RR or equivalent make ) as directed by engineer incharge.) single core cable in surface/recessed medium class PVC conduit, alongwith 1 No. 2.5 sq. mm FRLS PVC insulated copper conductor single core cable for earthing etc. as required including the cost of conduit.

Supplying and fixing of indicators on existing modular plate and switch box , incl. connections, etc. as required. (Havells/ SSK/ Anchor/ ABB/Schneider or equivalent).

Supplying and fixing modular blanking plate on the existing modular plate switch box excluding modular plate as required.

Supplying and fixing of GI box along with modular base and cover plate for modular sockets, switches in recess etc as required 4 module (200mm x 75mm)

Supplying and fixing of 5-10A switch on existing modular plate, incl connections etc as required. (Havells/SSK/Anchor/ABB/Schneider/ eq. make to be approved by EIC)

Supply and fixing of 24 way, Double door surface/ recess mounting, Horizontal type, 240 V, SP&N MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs, excluding cost of MCBs and Incomer. (Havells/Legrand/SSK/Schnider/ABB/ eq. make to be approved by EIC)

Supply, installation, testing and commissloning of 5-32A single pole rating 240/415V,10 KA "C" curve MCB of Legrand/ Havells/ L&T/ABB/ eq. make to be approved by EIC suitable for inductive load in the MCB distribution board complete with necessary connections.

Supply, installation, testing and commissioning of 32-40A DP rating 240/415V,10 KA "C" curve MCB of Legrand/ Havells/L&T/ABB suitable for inductive load in the MCB distribution board complete with necessary connections.

Supply, installation, testing and commissioning of 63A DP rating 240/415V,10 KA "C" curve MCB of Legrand/ Havells/ L&T/ABB suitable for inductive load in the MCB distribution board complete with necessary connections.

Main Panel

Design, Fabrication, Supplying, Installation, Testing and Commissioning of following panel, duly manufactured from CPRI approved manufacturer, made out of 2mm thick M.S. sheet steel , floor/wall mounted, vermin and dust proof, indoor type with suitable size of angle iron legs for grouting in the ground, with lockable type hinged doors, duly painted with provision for fixing of following switch gears, , Aluminium Bus Bar of various ratings after taking Derating factor into account, and other allied accessories etc. as required. (As per approved design,size may vary as per site requirement)

Providing and fixing of following protection equipments and other allied accessories including connections, inter connections, with suitable size of PVC insulated copper conductor cable including earthing etc. as required.

1. Normal INCOMING:

a)125A DP MCB 10 KA Havells/Legrand/ Schinider/ABB/L&T/ eq. make sample to be approved before installation..

b) 4 No. of Aluminium Bus Bar of 300 Amp.

c)Digital meters and phase indicators -1 set.

3.INVERTER

a) 32A DP MCB 10KA

b) 2 No. of Aluminium Bus Bar of 63 Amp.

c) Digital meter and phase indicators 01 set.

Wiring for Circuit/Sub mains along with earth wire in FRLS PVC insulated 660/1100 volt grade flexible stranded copper conductor wires in recessed or surface conduiting system, including the cost of conduit. (Havells/ Polycab/ Finolex/ Anchor/KEI/RR or equivalent).

2x10 sq mm +1x6 sq mm Heating submain

2x 6 sq mm + 1x 6 sq mm Lighting submain

2x 2.5 sq mm + 1x 2.5 sq mm Lighting circuit

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.Complete Job.

Providing and laying earth connection from earth electrode with 8 mm dia copper wire in 15 mm dia G.l. pipe from earth electrode including connection with copper thimble excavation and re-filling as required.

Supply, laying, connecting and commissioning of 35 sq mm 2 core XLPE/ PVC Insulated and steel armored 1.1 KV grade Aluminum LT cable for Service line, incl. cost of required al. thimbles duly crimped. (Over head/ under ground).

Supplying and laying of 63 mm dia (OD-63 mm & ID-51 mm nominal) size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.

HIGH MAST

Supply and erection of Mild Steel Swaged Tubular Pole conforming to IS: 2713-1980 (Part I & II), with base plate. The pole shall be manufactured from steel tubes and pipes as per IS:1141 (Fe 410), including excavation of pit and refilling with M-15 grade cement concrete (1:2:4 mix) from base plate up to 50 cm above ground level. The pole shall include earthing terminal and cable entry through 32 mm dia B-class GI sleeves. The pole shall be painted with two coats of red oxide primer and two coats of silver enamel paint. The job includes the cost of formwork and carriage of all required materials. (9 mtr., 410 SP-28).

Providing and fixing of detachable type round or square bracket, suitable for up to 6 light fittings, fabricated from 32/35 mm diameter GI pipe, including cutting, bending, and necessary welding to form uniform arms, with proper support and fixing arrangements as required. Complete job including priming, painting, and installation as per directions of the Engineer-in-Charge.

Providing and fixing of IK08, IP66, 120W protected high-power LED flood light system, with a single-piece pressure die-cast aluminum housing and toughened glass diffuser with suitable lenses on LEDs, to achieve various beam angles of high-power LEDs of 3 to 5 watts each. Integrated potted driver, as a unique BIS R number, having more than 85% and in compliance to BIS certified and Trade Mark certificate. The system-level luminaire efficacy shall be ≥ 110 lm/W. LED driver input voltage AC 120V to 270V with high-voltage cut-off. The driver shall have auto-resetting safety, power factor > 0.95, THD < 10%, and driver current ≤ 750 mA. The driver shall be capable of phase-to-phase protection up to 440V for 4 hours. Electrical connector, surge protection minimum 24 kV internal and 10 kV external, built inside the driver compartment. System life of 50,000 burning hours with 70% of initial lumens maintained, CRI ≥ 70 and CCT 5700K ± 355K. Manufacturer’s word mark/name shall be engraved/embossed/screen-printed on die-cast housing to allow traceability/authenticity. Fixture shall be IS 10322 compliant. OEM must have its own in-house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) certificate/report with liable warranty of product/accessories from OEM shall be submitted.

S/L, testing and commissioning of, 16 sq. mm 2 core XLPE Insulated, PVC aluminum armored cable 650 V/1100 V Grade as per IS 7098 (Part 1) 1988 with upto Date Amendments. Havells or Eq. standard make as directed by engineer Incharge and making end termination with brass compression gland and aluminum lugs of reqd size.

Supplying and laying of 63 mm dia (OD-63 mm & ID-51 mm nominal) size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.

Supply, installation, testing and commissioning of floor-mounted, compartmentalized outdoor-type main distribution panel, fabricated from 16-gauge sheet steel, complete with 4 Nos. angle iron legs, waterproof, dustproof, duly painted and provided with earth terminal and all necessary internal wiring and accessories. The panel shall be equipped with the following switchgear and control devices: 1.NORMAL INCOMING 100A DP MCB 10KA 01 no. 200A SP&N bus bar AL. Strips 01 set Digital meter and phase indicators 01 set. Space for 08 way MCBs The panel should have a compartmental space for housing a 4 KVA voltage stabilizer. The job includes providing and laying of M15 grade cement concrete pedastal block (size 2’-0” × 3’-0” × 1’-6”), including formwork, curing, finishing and carriage of all required materials, as per directions of Engineer-in-Charge.

Supplying and drawing FRLS PVC insulated copper conductor single core cable through pole up to light inside flexible pipe conduit.

3 x 2.5 sq. mm (P + N+Loop Earth)

Providing and fixing/ laying of earthing station by way of placing GI electrode rod/ pipe in a pit , connected through GI strip. (complete job)

Providing and fixing of IP 65 proct impact resistant polycarbonate enclosure box with knock out for cable entry /out including fixing with nut bolt fastner etc required complete in all respect of following size along with 63 A connector and 3 no. 6A MCB for controlling the High Mast Lights. 250 x 200 x 115 mm

Supply, installation, testing and commissioning of 4 kVA automatic relay-type Voltage Stabilizer suitable for 1.5 Ton Split Air Conditioner, designed to operate on wide input voltage range of 90–260V and deliver stabilized output of 230V ±3%, complete with low/high voltage cut-off protection, time delay feature, wall/floor mounting arrangement, indicator lamps for input/output status, necessary wiring connections and fixing hardware, including testing and demonstration at site. The stabilizer shall be ISI-marked and of approved make. (Approved Make: V-Guard / Servokon / Microtek / Bluebird / Everest / equivalent), and sample shall be approved by the Engineer-in-Charge before installation.

Providing of chemical earthing as per IS standards by way of digging 8 feet pit then embedding 3 mtr. Long GI earthing electrode, 80 mm dia. Connecting the plate with main control board by 10 SWG Copper wire with 1/2” dia. Full thread brass nut and bolts and washers, refilling the pit with chemical compound.