Construction of type-II staff qtrs 6 Nos. at Jail Kullu, Distt. Kullu (HP).

Amount

Excavation in foundation, trenches etc. in earth work in all kind of soil lifts upto 1.50 mtrs. Stacking the excavated soil not more than 3 mtrs. Clear from the edge of excavation and then returning the stacked soil in 15cm layers when required into plinths sides of foundation etc. consolidating each deposited layer by ramming, watering and then disposing of all surplus excavated earth as directed upto all leads and lifts dumping site (To be arranged by the contractor) including payment of MC/ local body dumping charges it lived any as per satisfaction of Engineer-in-charge through all modes of transportation including head load, animal load or mechanical means along with its leveling fine dressing and with all kinds of labour, machineries, tools equipments and safety measures and incidentals necessary to complete the work by mechanical means and labour (if required). All useful material such as stones, shingles aggregate and slates shall be properly stacked at site to the maximum possible extent in all leads and lifts through all modes of transportation and used/ removed as per the direction of Engineer-in-charge. Any loss to the public and private propriety during the course of execution and disposal of serviceable and unserviceable materials shall be absolute responsibility of the contractor and shall have to be duly compensated by him in all respects including all incidental charges..

Providing and laying cement concrete 1:6:12 (One cement : six sand : twelve graded/crushed stone aggregate 40 mm (Forty millimeter) nominal size) mechanically mix by concrete mixer including curing complete excluding cost of centering and shuttering in: Foundation and plinth, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Random rubble/ploygonal rubble (uncoursed/ brought to courses) with hard stones of approved quality in foundation and plinth including levelling up with cement concrete 1:6:12 (1cement: 6sand: 12graded stone aggregate 20mm nominal size) at plinth level in cement mortar 1:6 (1cement: 6sand) in foundation and plinth including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge..

Stone soiling hand packed with interstices and spall under floor including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge..

Providing from work with steel plates 3.15mm thick weled with angle iron in frame 30x30x5mm so as to give a fair finish including levelling centering, shuttering strutting and propping etc. With wooden battens and ballies, hight of propping and cenring below supporting floor two ceiling and removal of the same for instu- reinforced concrete and plain concrete work in:- a) Foundation footing bases of columns etc. and mass concrete including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge..

b) Columns, pilasrs, post and struts, square, rectangular or polygonal in plain.

(c) Beams, cantilevers, girders & lintels, sides & soffits or beams, beam haunchings, cantilvers bressumers and lintels not exceeding 1mtrs in depth.

(d) Flat surfaces such as soffits of suspended floors, roofs, landing of the like floors etc. upto 200mm in thickness.

(e) stair cases with slopping or stopped soffits exclding landing

(f) vertical surface sch as wall any thickness partition plaster and string course and like

(g) Edges of slabs and breaks in floors and walls

Providing & laying cement concrete 1:3:6 (1cement: 3sand: 6graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work in foundation and plinth including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge..

Providing and laying cement concrete work 1:1.5:3 (1cement: 1.5sand: 3 greaded stone aggregate 20mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. a)foundation footing basis of colums etc

b) Columns, pillars, posts and struts upto floor two level.

c) Suspended floors, roofs, landings and their supports, balconies, beams, girders, bressumers and their cases (except spiral cantilever upto floor two level.

d) stair cases ( except spiral) stair cases excluding landing but i/c preparing of the surface and finished of nosing up to floor two level

Providing tor steel reinforcement for RCC work including bending, binding and placing in position complete upto floor two level including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.. .

Brick work using common clay burnt building bricks in superstructure avobe ground level in cement mortar 1:6 (1cement: 6 sand) 2nd class bricks upto all hight. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge..

Half brick work with common brunt clay building bricks in super structure in cement mortar 1:4 ( 1 cement :4 sand 0 1st class brick including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Prooviding wood work in frames of doors, windows, clearestory windows and other framed and fixed in postion. 1st class Hard wood ( Kapur sal) including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing panelled glazed shutter for door window and clear story window for door windows and clearstory windows with necessary screws 40 mm thick second class deodar wood including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing wire guage shuter using galvanised M.S. wire guage of I.S. guage designation 85G with wire of dia 0.56mm for door windows and clearstory windows with necessary screws 30 mm thick second class deodar wood including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing & fixing brass sliding door bolt anodized transparent or dyed to required colour and shade with bolts and nuts screws etc. complete including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. (i) 300mm x 10mm.

Providing and fixing brass tower bolts (barrel type ) anodized transparent or dyed to required shade & colour including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge..(a)200 x 10mm

Prooviding and fixing brass finshed brass handles with nuts and secrews etc complete including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.. (a) 125mm.

Providing and fixing oxidized brass hooks and eyes 250mm including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

P/F 100mm bright finished brass floor door stopper with rubber cushion screws etc to suit shutter thickness complete including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

P/F bright finished door closer 150mm including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

P/F bright finished/and black enamel iron (helical door spring) 150mm including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing 40 x 3 mm(forty into three millimetre) flat iron hold fast 40 cm(forty cetimetre) long including fixing to frame with 10 mm (Ten millimetre) dia bolts, nuts and wooden plugs and embeding in cement concrete block 30 x 10 x15 cm (Thirty into ten into fifteen) centimetre) in 1:3:6 (one cement :three sand :six graded stone aggregate 20 mm(Twenty millimetre) nominal size ). including carriage of all labour equipment & materials to various location through all leads & lifts complete as per entire satisfaction of the Engineer-in-Charge.

P/F 75X60mm rounded handrail in straight lenght complete in 1st class deodar wood including carriage of all labour equipment & materials to various location through all leads & lifts complete as per entire satisfaction of the Engineer-in-Charge.

P/F 1mm thick MS sheet garrage door with frame of 40X40X6mm angle iron 3.15mm MS gusset plate at the junction and corner all necessary fitting complete i/c applying a prime coat of red lead paint using flat 30X 6mm for diagonal braces and central cross piece including carriage of all labour equipment & materials to various location through all leads & lifts complete as per entire satisfaction of the Engineer-in-Charge.

P/f Stainless steel hand rail complete in all respect including carriage of all labour equipment & materials to various location through all leads & lifts complete as per entire satisfaction of the Engineer-in-Charge.

Providing and fixing MS Grills of required pattern and standard design. including carriage of all labour equipment & materials to various location through all leads & lifts complete as per entire satisfaction of the Engineer-in-Charge.

6mm cement pilaster to ceiling in cement mortar 1:4 ( 1 cement 4 sand) including carriage of all labour equipment & materials to various location through all leads & lifts complete as per entire satisfaction of the Engineer-in-Charge.

15mm cement plaster in singale coat on the fair side of brick/concrete/stone walls for interior plastring upto floor two level including arrrises, internal rounded angles, chamfers and/or rounded angle not exceeding 80mm in girth and finished evehn and smooth in cement mortar 1:6(1cement :6sand). including carriage of all labour equipment & materials to various location through all leads & lifts complete as per entire satisfaction of the Engineer-in-Charge.

15mm cement plaster in singale coat on the rough of brick/concrete/stone walls for interior plastring upto floor two level including arrrises, internal rounded angles, chamfers and/or rounded angle not exceeding 80mm in girth and finished evehn and smooth in cement mortar 1:6(1cement :6sand). including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge..

Appling birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final metter finish to the surface complete. including carriage of all labour equipment & materials to various location through all leads & lifts complete as per entire satisfaction of the Engineer-in-Charge.

Distempering (two coats) with oil boud washable disremper of approved brand and manufacture and of required shade on decorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and menufacture after thoroughly brushing the surface free from mortar dropping and other forign matter and also including preparing the surface even and sand papered smooth priming coat with distemper primer. including carriage of all labour equipment & materials to various location through all leads & lifts complete as per entire satisfaction of the Engineer-in-Charge.

Finishing wall with water proofing cement paint Apex of Asian brand and manufacture and of required shade on decorated wall surfaces (two coats) to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials.including carriage of all labour equipment & materials to various location through all leads & lifts complete as per entire satisfaction of the Engineer-in-Charge.

Providing and fixing 0.60 mm (Zero point sixty millimeter) thick prepainted steel sheet of approved make in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6 mm (Six millimeter) diametre with prepainted limpet and rubber washers complete with all accessories, including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge.

Providing and fixing ridges or hips 60cm (Sixty centimeter) over all with 0.45 mm (Zero point furty five millimeter) thick prepainted steel sheets of approve make in roofing with hot dipped metallic zinc coated sheets with top coat of regular modified polyster organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating+ back coat of polyster of 5 (Five) microns over 5 (Five) microns primer coating i/c fixing with prepainted, bolts & nuts 6 mm dia (Six millimeter diameter) & prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer-in-Charge.

Steel work welded in built up sections, trusses and framed work, i/c cutting, hosting, fixing in position and appling a priming coat of red lead paint:-(a) In trusses and trussed purlins in building. including carriage of all labour equipment & materials to various location through all leads & lifts complete as per entire satisfaction of the Engineer-in-Charge.

b) In grating framed guard, bars ladders, railing, brackets and similar works i/c carriage of materials with in all lead and lift including carriage of all labour equipment & materials to various location through all leads & lifts complete as per entire satisfaction of the Engineer-in-Charge.

White glazed tiles 6mm thick in flooring, treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1cement: 3sand) & finished with flush pointing in white cement. White glazed tiles in treads of steps not exceeding 30cm in width.including carriage of all labour equipment & materials to various location through all leads & lifts complete as per entire satisfaction of the Engineer-in-Charge.

Kota stone slab flooring 20mm average base of cement mortar 1:4 and jointing with grey cement slurry mixed with pigment to matcg the shade of the slab i/c rubbing and polishing complete including carriage of all labour equipment & materials to various location through all leads & lifts complete as per entire satisfaction of the Engineer-in-Charge.

P/L spartic ceramic tiles 5.5mm thick in floorinf(300X300mm)treads or steps laid on bed of 12mm thick cement mortar 1:3 finished with flush pointing in white cement including carriage of all labour equipment & materials to various location through all leads & lifts complete as per entire satisfaction of the Engineer-in-Charge.

P/L granite stone in flooring 20mm average thickness base of CM 1:3 laid over and joint with grey cement slurry mixed with pigment to match the shade of granite stone i/c rubbing and polishing complete including carriage of all labour equipment & materials to various location through all leads & lifts complete as per entire satisfaction of the Engineer-in-Charge.

P/F12mm thick prelaminated board bwp phenol bonded exterior/interior grade both sided 25mm thick including carriage of all labour equipment & materials to various location through all leads & lifts complete as per entire satisfaction of the Engineer-in-Charge.

Providing plinth protection under layer of 75mm thick bed of dry brick/stone aggregate 40mm nominal size well ramed and consolidated and ground with fine sand including prepration of ground finished with 50mm thick cement concrete 1:3:6 (1cement:3sand :6graded stone aggregate 20mm nominal size.) and fixing oxidized M.S hooks and eyes 150mm long. including carriage of all labour equipment & materials to various location through all leads & lifts complete as per entire satisfaction of the Engineer-in-Charge.

Conustructing course rubble hammer dressed U shape open surface drain with side wall 15X22cm in cement mortar 1:6 (1cement:6sand)and inside plastering with cement plaster 1:3 including earth and laying 10cm concrete in 1:5:10 of 40mm nominal size and 7.5cm cement concrete 1:2:4 of 20mm nominal size and finished with a floating coat of neat cement as per standard design including carriage of all labour equipment & materials to various location through all leads & lifts complete as per entire satisfaction of the Engineer-in-Charge.

Providing and laying cement concrete flooring 1:2:4(1cement:2sand:4graded stone agregate laid in one layer finished with floating coat of neat cement 50mm thick

Applying priming coat (excluding priming coat) on wood and other wooden surface under coat with ready mixed paint brushing to give an even shade including cleaning of all dirt, dust and other foresign matter with ready mixed paint otyher than white.including carriage of all labour equipment & materials to various location through all leads & lifts complete as per entire satisfaction of the Engineer-in-Charge.

Painting two coat (excluding priming coat) on wood and other wooden surface under coat with ready mixed paint brushing to give an even shade including cleaning of all dirt, dust and other foresign matter with ready mixed paint other than white. including carriage of all labour equipment & materials to various location through all leads & lifts complete as per entire satisfaction of the Engineer-in-Charge.

Appling priming coat over new steel and other matel surfaces after and including prepairing the surface by thoroughly cleaning oil grease, dirt and other foreign matters sand papered knotting Ready mixed pain brushing red oxide/zink oxide chrome.

Painting two coat (excluding priming coat) on new steel and other metal surface under coat with ready mixed paint brushing to give an even shade including cleaning of all dirt, dust and other foresign matter with ready mixed paint otyher than white.

P/L PVC pipe for rain water pipe complete with adhasive 110mm dia including carriage of all labour equipment & materials to various location through all leads & lifts complete as per entire satisfaction of the Engineer-in-Charge.

P/L PVC bend for rain water pipe complete with adhesive 110mm dia including carriage of all labour equipment & materials to various location through all leads & lifts complete as per entire satisfaction of the Engineer-in-Charge.

P/F CI clamps for rain water pipe 110mm dia including carriage of all labour equipment & materials to various location through all leads & lifts complete as per entire satisfaction of the Engineer-in-Charge.

Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. including carriage of all labour equipment & materials to various location through all leads & lifts complete as per entire satisfaction of the Engineer-in-Charge.

P/F 100mm size P and S trap for water closet squatting pan /c jointing the trap with and soil pipe in cement mortar 1:1(1cement: 1 sand ) sand cast iron.

Providing and fixing plastic seat(solid cover) and cover for wash down water closet with C.P. Brass hinges and rubber buffer in white plastic seat cover

P/F zet for W.C complete in all respect including carriage of all labour equipment & materials to various location through all leads & lifts complete as per entire satisfaction of the Engineer-in-Charge.

Providing and fixing to wall ceiling and floor G.I. pipe (Heavy Grade) 15mm dia. With fittings and clamps i/c making good the wall, ceiling and floor including carriage of all labour equipment & materials to various location through all leads & lifts complete as per entire satisfaction of the Engineer-in-Charge.

Providing and fixing G.I. unions. 15mm dia. including carriage of all labour equipment & materials to various location through all leads & lifts complete as per entire satisfaction of the Engineer-in-Charge.

Providing and fixing PVC connection. including carriage of all labour equipment & materials to various location through all leads & lifts complete as per entire satisfaction of the Engineer-in-Charge.

Providing & fiixng PVC waste pipe for wash basin or sink 32mm dia. including carriage of all labour equipment & materials to various location through all leads & lifts complete as per entire satisfaction of the Engineer-in-Charge.

Providing & fixing PVC floor trap of self cleaning design with sand cast iron screwed down or hinged grating with or without vent arm complete i/c cost of cutting & making good the walls and floors. 100mm nominal dia. including carriage of all labour equipment & materials to various location through all leads & lifts complete as per entire satisfaction of the Engineer-in-Charge.

Providing & fixing 100mm sand cast iron grating for gully, floor or Nahni trap. including carriage of all labour equipment & materials to various location through all leads & lifts complete as per entire satisfaction of the Engineer-in-Charge.

Providing & fixing C.P stap cocks 15mm dia. including carriage of all labour equipment & materials to various location through all leads & lifts complete as per entire satisfaction of the Engineer-in-Charge.

Providing & fixing CP brass bib tap with capastan head 15mm dia. including carriage of all labour equipment & materials to various location through all leads & lifts complete as per entire satisfaction of the Engineer-in-Charge.

Providing & fixing C.P. pillar tap with capaston head. 15mm dia. including carriage of all labour equipment & materials to various location through all leads & lifts complete as per entire satisfaction of the Engineer-in-Charge.

Providing and fixing towel rail complete with C.P. brass bracket fixed to wooden plugs with C.P. brass 600mm x 20mm. including carriage of all labour equipment & materials to various location through all leads & lifts complete as per entire satisfaction of the Engineer-in-Charge.

Providing & fixing 600 x 450mm bevelled edge mirror of superior glass mounted on 6mm thick AC sheets or plywood sheet and fixed to wooden plugs with CP brass screws and washers of standard quality. including carriage of all labour equipment & materials to various location through all leads & lifts complete as per entire satisfaction of the Engineer-in-Charge.

P/F brass soap dish with C.P. brass brckets fixed to wooden cleats with C.P. brass screws. including carriage of all labour equipment & materials to various location through all leads & lifts complete as per entire satisfaction of the Engineer-in-Charge.

Single equal branch of required degree with oval access door, insertion rubber washer 3mm thick nut and bolt complete including carriage of all labour equipment & materials to various location through all leads & lifts complete as per entire satisfaction of the Engineer-in-Charge. . 100 mm dia.

P/F PVC plain bend ISI marked i/c fixing with approved adhesive etc.complete (Finolex Type-B)i)110mm dia. including carriage of all labour equipment & materials to various location through all leads & lifts complete as per entire satisfaction of the Engineer-in-Charge.

P/F PVC collors ISI markes i/c fixing with approved adhesive etc. complete 100mm including carriage of all labour equipment & materials to various location through all leads & lifts complete as per entire satisfaction of the Engineer-in-Charge.

Providing and fixing PVC water storage tank. 1000 ltrs. Capacity with all necessary fittings. including carriage of all labour equipment & materials to various location through all leads & lifts complete as per entire satisfaction of the Engineer-in-Charge.

P/F on wall face PVC ( D-plast) spigot pipes for working pressure not less than 4.5 kg/ sqm i/c filling the joints with approved adhesive complete-110mm dia pipe including carriage of all labour equipment & materials to various location through all leads & lifts complete as per entire satisfaction of the Engineer-in-Charge.

P/F kitchen sink stainless steel of approved standard IS make with drain board and CP waste with CI and MS brackets painted white i/c cutting holes and making good the same but excluding fitting 610X510 mm with bowl depth 200mm including carriage of all labour equipment & materials to various location through all leads & lifts complete as per entire satisfaction of the Engineer-in-Charge.

Providing & fixing vitreous china wash basin with single hole for pillar tap with CI or MS brackets painted white including cutting holes and making good the same but excluding fittings flat back 630 x450mm of reputed make. including carriage of all labour equipment & materials to various location through all leads & lifts complete as per entire satisfaction of the Engineer-in-Charge.

Constructing manhole with RCC top slab in 1:2:4 (1cement: 2sand :4graded stone nominal size) foundation concrete 1:4:8 (1 Cement: 4 sand :8 graded stone aggregate 40mm nominal size) inside plastering 15mm in cement morter 1:3 (1cement : 3sand) finished with a floating coat in cement concrete 1:2:4) (1cement: 2sand :4graded 20mm stone nominal size) finished smooth including curing & testing complete. Inside size 800mmx800mmx1000mm deep including C.I. cover with frame and cover to be not less than 58kg. Weight of frame 58kg. and weight of cover not less than 116kg with 200 thick.

P/F PVC plain double equal branch IS marked i/c fixing with approved adhesive etc complete 110 mm including carriage of all labour equipment & materials to various location through all leads & lifts complete as per entire satisfaction of the Engineer-in-Charge.

P/F fullway brass wheel valve complete 15mm dia including carriage of all labour equipment & materials to various location through all leads & lifts complete as per entire satisfaction of the Engineer-in-Charge.

Cutting in earth work and disposal of excavated earth upto a lead of 2km by mechanical transport. including carriage of all labour equipment & materials to various location through all leads & lifts complete as per entire satisfaction of the Engineer-in-Charge.

Construction of toe wall for protection of slops as per drawing & technical specification Clause-1302.5 nominal mix 1:3:6(1cement: 3sand: 6graded stone aggregate 20mm nominal size) including carriage of all labour equipment & materials to various location through all leads & lifts complete as per entire satisfaction of the Engineer-in-Charge.

Providing and laying PVC pipes in weep holes. 100mm dia. including carriage of all labour equipment & materials to various location through all leads & lifts complete as per entire satisfaction of the Engineer-in-Charge.

Boulder filling behind the retaining wall including carriage of all labour equipment & materials to various location through all leads & lifts complete as per entire satisfaction of the Engineer-in-Charge.

kotkandiconstructionpvt.ltd.

Ajeet Sharma