15th fc 2023-24 2nd installment tied grant

Earthwork in excavation for structures as per drawings and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious materials and disposal up to a lead of 50 mts dressing of sides as per Technical Specifications 305 MORD / 304 MORTH. (RBR-FNDN-1-A)

Carting of waste material with a initial lead up to 3.00 km including loading, unloading charges etc,. Complete. As per SSR P41 (PH)

Collection, supply and Filling with Stone Crusher Dust (Finer than 3mm HBG m/c) in layers by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges etc., complete for finished item of work. (APSS NO. 309 & 310) (RBR - F NDN - 2)

Plain Cement Concrete (1:4:8) mix using 40mm hard granite machine crushed metal with OPC (Ordinary Portland Cement) including cost and conveyance of all necessary material, labour, curing for 7 days etc., complete. (BLD - CSTN - 2 - 5)

RCC M-20 graded mix corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard broken stone of granite metal including cost and conveyance of all materials like cement(OPC), fine aggregate (sand), coarse aggregate (metal) and water etc., to site and labour charges such as machine mixing, laying concrete, curing for 21 days etc., complete for finished item of work. BLD-CSTN-2-13. - For Footing

RCC M-20 graded mix corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard broken stone of granite metal including cost and conveyance of all materials like cement(OPC), fine aggregate (sand), coarse aggregate (metal) and water etc., to site and labour charges such as machine mixing, laying concrete, curing for 21 days etc., complete for finished item of work. BLD-CSTN-2-13. - For Plinth beam

RCC M-20 graded mix corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard broken stone of granite metal including cost and conveyance of all materials like cement(OPC), fine aggregate (sand), coarse aggregate (metal) and water etc., to site and labour charges such as machine mixing, laying concrete, curing for 21 days etc., complete for finished item of work. BLD-CSTN-2-13. - For Columns

Supplying, fitting and placing HYSD / TMT (Fe-500 / Fe-500D / Fe-550) with ISI Standard Mark bar reinforcement in foundation complete as per drawings and technical specifications for Bars below 36 mm dia including over laps and wastage, where they are not welded BLD-CSTN-2-18

RR Masonry in CM (1:6) using rough stones, bond stones and CR stones with OPC including cost and conveyance of all materials and labour charges for mixing mortar finishing the layers, curing complete as per standard specifications. (BLD - CSTN - 4-8)

Brick masonry in CM (1:6), using Fly ash bricks with OPC including cost and conveyance of all necessary materials and labour charges, watering, curing etc., complete. BLD-CSTN-3-1

Plastering in CM (1:3) Prop, 12mm thick using OPC grade cement including cost and conveyance of all materials, labour charges, curing complete etc. BLD-CSTN-6-1

Supply, Delivery and fixing in Position of MS Gate of approved design including cost and conveyance of all materials labour charges etc complete as SS of as desired by Engineer - In - Charges. For Gate

Painting to new Iron works with 2 coats of Synthetic Enamel paints of approved brand and shade over a base coat of appropriate Red Oxide primer of approved brand, making 3 coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 911. (BLD-CSTN-10-7 & 10-11) For Gate

Hire charges for engaging JCB for Demoltion of old damaged structures and for jungle clearence including driver charges, fuel charges, labour chargess etc., complete as per local rate

Plastic Emulsion paints - Three Coats for New Wall with plastic emulsion paint of approved brand, making 3 coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work. (BLD-CSTN-10-11-viii)

Demolition of existing damaged RCC Roof Slab including stacking of serviceable materials and disposal of unserviceable materials. BLD - CSTN - 12 - 2 - i

Dismantling of existing damaged Masonry work including clearing away and carefully stacking materials useful for reuse and labour charges etc,. Complete. P94/863/SSR2019-20 (BMT-S.01)

Earthwork in excavation for structures as per drawings and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious materials and disposal up to a lead of 50 mts dressing of sides and bottom as per Technical Specifications 305 MORD / 304 MORTH. (RBR-FNDN-1-A)

Collection, supply and Filling with Stone Crusher Dust (Finer than 3mm HBG m/c) in layers by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges etc., complete for finished item of work. (APSS NO. 309 & 310) (RBR - F NDN - 2)

Plain Cement Concrete (1:4:8) mix using 40mm hard granite machine crushed metal with OPC (Ordinary Portland Cement) including cost and conveyance of all necessary material, labour, curing for 7 days etc., complete. (BLD - CSTN - 2 - 5)

RR Masonry in CM (1:8) using rough stones, bond stones and CR stones with OPC including cost and conveyance of all materials and labour charges for mixing mortar finishing the layers, curing complete as per standard specifications. (BLD - CSTN - 4-9)

RCC M-20 graded mix corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard broken stone of granite metal including cost and conveyance of all materials like cement(OPC), fine aggregate (sand), coarse aggregate (metal) and water etc., to site and labour charges such as machine mixing, laying concrete, curing for 21 days etc.,complete for finished item of work. BLD-CSTN-2-13 - For footing

RCC M-20 graded mix corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard broken stone of granite metal including cost and conveyance of all materials like cement(OPC), fine aggregate (sand), coarse aggregate (metal) and water etc., to site and labour charges such as machine mixing, laying concrete, curing for 21 days etc.,complete for finished item of work. BLD-CSTN-2-13 - For columns

RCC M-20 graded mix corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard broken stone of granite metal including cost and conveyance of all materials like cement(OPC), fine aggregate (sand), coarse aggregate (metal) and water etc., to site and labour charges such as machine mixing, laying concrete, curing for 21 days etc.,complete for finished item of work. BLD-CSTN-2-13 - For lintel (Alround)

RCC M-20 graded mix corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard broken stone of granite metal including cost and conveyance of all materials like cement(OPC), fine aggregate (sand), coarse aggregate (metal) and water etc., to site and labour charges such as machine mixing, laying concrete, curing for 21 days etc.,complete for finished item of work. BLD-CSTN-2-13 - For sunshades

RCC M-20 graded mix corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard broken stone of granite metal including cost and conveyance of all materials like cement(OPC), fine aggregate (sand), coarse aggregate (metal) and water etc., to site and labour charges such as machine mixing, laying concrete, curing for 21 days etc.,complete for finished item of work. BLD-CSTN-2-13 - For beams

RCC M-20 graded mix corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard broken stone of granite metal including cost and conveyance of all materials like cement(OPC), fine aggregate (sand), coarse aggregate (metal) and water etc., to site and labour charges such as machine mixing, laying concrete, curing for 21 days etc.,complete for finished item of work. BLD-CSTN-2-13 - For slab

Supplying, fitting and placing HYSD (Fe-415) bar reinforcement in position complete as per drawings and techinical specifications including 5% for overlaps and wastage. BLD-CSTN-2-18

Brick masonry in CM (1:6), using Fly ash bricks with OPC including cost and conveyance of all necessary materials and labour charges, watering, curing etc., complete.

Plastering in CM (1:3) Prop, 12mm thick using OPC grade cement including cost and conveyance of all materials, labour charges, curing complete etc. BLD-CSTN-6-1

Colour washing Three coats with lime of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials. BLD-CSTN-9-8

Flooring with vitrified polished floor tiles (598 x 598 x 8 mm) of 1st quality, set over base coat of CM (1:8), 12 mm thick including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials etc., complete for finished item of work. BLD-CSTN-7-5

Providing impervious coat to RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost of all materials, all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc., complete for finished item of work. BLD-CSTN-8-25

Supply, Delivery and fixing in Position of MS Doors and Windows of approved design including cost and conveyance of all materials labour charges etc complete as SS of as desired by Engineer - In - Charges.

Painting to new Iron works with 2 coats of Synthetic Enamel paints of approved brand and shade over a base coat of appropriate Red Oxide primer of approved brand, making 3 coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 911. (BLD-CSTN-10-7 & 10-11) For Gate

Supply and Fixing of 25mm dia 2.20mm thick PVC pipe (ISI MARK) concealed in wall with all required accessories including masonary work and labour charges etc., complete. 1.4.2 (a)

Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) in existing pipe with 6A switch, Ceiling rose and 3mm thick hylam sheet covering to switch control box including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings. 2.1.1

Supply and run of 2 of 36/0.3mm (2.5 Sq.mm) F.R P.V.C. insulated flexible copper cable in existing pipe for mains inlcuding all labour charges etc., complete. 3.1.4

Supply of 1 x 20W LED tube Tube light as per local rate

Supply of 48" (1200mm) Sweep ISI mark Ceiling Fan as per IS 374 - 1979 and, with double ball bearings, power input not more than 50W , air delivery more than 200 cubic meter/min but without Regulator (ELEC-5.1.3)

Supply of stepped type Electronic Regulator. Makes: Vimal opel / Starex Smile / CPL/Koncep. P156/38/SSR2018-19 (ELEC-1.7.12)

Earthwork in excavation for structures as per drawings and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious materials and disposal up to a lead of 50 mts dressing of sides as per Technical Specifications 305 MORD / 304 MORTH. (RBR-FNDN-1-A)

Carting of waste material with a initial lead up to 3.00 km including loading, unloading charges etc,. Complete. As per SSR P41 (PH)

Collection, supply and Filling with Stone Crusher Dust (Finer than 3mm HBG m/c) in layers by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges etc., complete for finished item of work. (APSS NO. 309 & 310) (RBR - F NDN - 2)

Plain Cement Concrete (1:4:8) mix using 40mm hard granite machine crushed metal with OPC (Ordinary Portland Cement) including cost and conveyance of all necessary material, labour, curing for 7 days etc., complete. (BLD - CSTN - 2 - 5)

RR Masonry in CM (1:6) using rough stones, bond stones and CR stones with OPC including cost and conveyance of all materials and labour charges for mixing mortar finishing the layers, curing complete as per standard specifications. (BLD - CSTN - 4-8)

RCC M-20 graded mix corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard broken stone of granite metal including cost and conveyance of all materials like cement(OPC), fine aggregate (sand), coarse aggregate (metal) and water etc., to site and labour charges such as machine mixing, laying concrete, curing for 21 days etc., complete for finished item of work. BLD-CSTN-2-13 - For plinth beam

RCC M-20 graded mix corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard broken stone of granite metal including cost and conveyance of all materials like cement(OPC), fine aggregate (sand), coarse aggregate (metal) and water etc., to site and labour charges such as machine mixing, laying concrete, curing for 21 days etc., complete for finished item of work. BLD-CSTN-2-13 - For slab

Supplying, fitting and placing HYSD steel bars (Fe-415) reinforcement in position complete as per drawings and technical specifications including 5% for overlaps and wastage.BLD-CSTN-2-18

Brick masonry in CM (1:6), using Fly ash bricks with OPC including cost and conveyance of all necessary materials and labour charges, watering, curing etc., complete. BLD-CSTN-3-1

Plastering in CM (1:3) Prop, 12mm thick using OPC grade cement including cost and conveyance of all materials, labour charges, curing complete etc. BLD-CSTN-6-1

SINGLE SIDE PRELAM SOLID PANEL PVC DOOR FRAME (CHOUKHAT) Providing and fixing factory made Pac single side Prelam door frame of the size 50X47 mm with a wall thickness of 5mm, made out of extruded 5mm rigid Pac single side prelam sheet, meter cutat two corners and joined with 2nos. of 150mm long brackets of 1515mm MS.Square tube. The two vertical door profiles are to be reinforced with 19X19mm MS. square tube of 19guage. The door frame shall be fixed to the wall using 65/100mm long MS. Screws through the frame by using Pac fasteners. a minimum of 4nos. of screws to be provided for each vertical member and minimum 2nos. for horizontal member etc. complete as per manufacture specification and irection of Engineer-in-charge. (BMT-N.05)

Providing and fixing 35mm thick BRAND FACTORY MADE MOULDED DOOR SHUTTER consisting of sold core single leaf flush door of 30mm thickness, lipped with 15mm (5mmX3) thick X 30mm width on one stiles and top rails and 10mm (5mmX2) thick X 30mm width on the other stiles and bottom rails. The inner panel laminated with 2mm thick termite proof, water proof and fire resistant moulded Pac sheet with 2,4,6 raised panel design in different panel and / or prelam colours on one side after routing the moulded designon flush door and 2mm prelam Pac sheet on other side using rubber adhesive on flush door and solvent cement adhesive on Pac lipping etc. complete as per direction of Engineer-inCharge, manufacture specification and drawing. (BMT-N.06)

Colour washing Three coats with lime of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials. BLD-CSTN-9-8

Flooring / Dadoing with Ceramic tiles, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work. (BLD-CSTN-7-6)

Supplying and Fixing European Water Closet of 1st quality conforming to IS:2556-Part-2-1973 ofwhite glazedwith 'S' trap (BMW-D.14 )

Supplying & Fixing low down porcelain flushing tank 10 Lit Capacitywith internal components (BMW-D.11)

Supplying & Fixing white glazed flat back Bowl urinals of size 440 mm x 265 mm x 315 mm with internal flushing rim fixed with screws complete Indian make conforming to IS. (BMW-D.33)

Providing & Placing on Terrace (at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes. (BMW-G.01)

Supply and Fixing of 22.20mm OD CPVC Pipe Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007) including cost and conveyace etc., complete. (BMW-1.221)

Supplying & Fixing Indian make Flat Back Wash Hand Basin1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain,32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:29631979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/ Esso or equivalent complete with standard CI brackets including wooden block: 450 x 300 mm - Single C.P. Pillar cock (BMW-D.26)

Supplying and fixing TV shape mirror with plastic frame size 609.6 mm x 457 .2 mm (BMW-I.105)

Earthwork in excavation for structures as per drawings and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious materials and disposal up to a lead of 50 mts dressing of sides as per Technical Specifications 305 MORD / 304 MORTH. (RBR-FNDN-1-A)

Carting of waste material with a initial lead up to 3.00 km including loading, unloading charges etc,. Complete. As per SSR P41 (PH)

Collection, supply and Filling with Stone Crusher Dust (Finer than 3mm HBG m/c) in layers by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges etc., complete for finished item of work. (APSS NO. 309 & 310) (RBR - F NDN - 2)

Plain Cement Concrete (1:4:8) mix using 40mm hard granite machine crushed metal with OPC (Ordinary Portland Cement) including cost and conveyance of all necessary material, labour, curing for 7 days etc., complete. (BLD - CSTN - 2 - 5)

RCC M-20 graded mix corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard broken stone of granite metal including cost and conveyance of all materials like cement(OPC), fine aggregate (sand), coarse aggregate (metal) and water etc., to site and labour charges such as machine mixing, laying concrete, curing for 21 days etc., complete for finished item of work. BLD-CSTN-2-13. - For bed

RCC M-20 graded mix corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard broken stone of granite metal including cost and conveyance of all materials like cement(OPC), fine aggregate (sand), coarse aggregate (metal) and water etc., to site and labour charges such as machine mixing, laying concrete, curing for 21 days etc., complete for finished item of work. BLD-CSTN-2-13. - For slab

Supplying, fitting and placing HYSD steel bars (Fe-415) reinforcement in position complete as per drawings and technical specifications including 5% for overlaps and wastage.BLD-CSTN-2-18

Brick masonry in CM (1:6), using Fly ash bricks with OPC including cost and conveyance of all necessary materials and labour charges, watering, curing etc., complete. BLD-CSTN-3-1

Plastering in CM (1:3) Prop, 20mm thick using OPC grade cement including cost and conveyance of all materials, labour charges, curing complete etc. BLD - CSTN - 6-8

Collection, supply and Filling with Stone Crusher Dust (Finer than 3mm HBG m/c) in layers by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges etc., complete for finished item of work. (APSS NO. 309 & 310) (RBR - F NDN - 2)