Annual Plan-524/25 Pala Municipality-524/25 JANATHA ROAD- ALPHONSA ROAD MAINTENANCE IN WARD NO 25-General Civil Work

Amount

Road Works

75.5.5.A.1pb:Modified Penetration Macadam 50 mm thick using Bitumen S-65 - Packed Bitumen Rates <br> Construction of penetration macadam over prepared base by providing a layer of compacted crushed coarse aggregate using chips spreader with alternate applications of bituminous binder and key aggregates and rolling with a three wheel 80-100 kN static roller to achieve the desired degree of compaction as per Technical Specification Clause 506.

75.5.9.1.2pb:20mm thick Open-Graded Premix Carpet using Bituminous (penetration grade/modified bitumen) Binder - Bitumen S-65 - Packed Bitumen Rates<br> Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C as per Technical Specification Clause 508. <br> Case - I By Manual Means <br> (II) Bitumen (S-65)

75.5.2.1pb:Tack Coat - With Packed Bitumen Rates <br> Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.20 to 0.25 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503.

OD395935/2024-2025:Mix Seal Surfacing - Manual Means - Type A- Bitumen S-65 using Shredded plastic Providing, laying and rolling of close grade premix surfacing material of 20mm thickness composed of 11.2mm to 0.90mm(Type-A) or 13.2mm to 0.90mm (Type-B)aggregates coated with shredded plastic(3% by weight of bitumen) as per standard procedure using penetration grade bitumen to required line and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with three wheel 8-10 kN static roller and finishing to required level an grade as per Technical Specification Clause 509 By Manual Means. Type A(II)Bitumen (S-65)

OD395934/2024-2025:S/F Information board 75x60cm using GI pipe as post and 1mm thick MS sheet surrounded by MS angles including painting ,lettering and fixing in concrete etc.as per the direction of eic

75.8.1:Providing Plain cement concrete for road work CC 1:2:4 (1 cement: 2 fine aggregate: 4course aggregate) laid to required slope and camber in panels (@ 3 m c/c) as requiredincluding compaction, finishing and tamping etc .complete. Max. size of courseaggregate not exceeding 25mm , mixed in concrete mixer etc complete as perspecification (i) Nominal mix (1:2:4)

GEORGE JOSEPH (BID ID -2085009)

Bidder Name

Mathachan m vadana

GEORGE JOSEPH