Provision of 03 nos. Deep bore well along with installation of solar panel at different locations in Sirka under CSR 22-23, Argada area.

Amount

PART-A Solar Pumping system Proiding and fixingt solar power operated 3 HP Submersible pump AC 3 Phase input (ISI)including 3 solar controller , PV arry mono/crystalline cells 3000 watts peak minimum ak Vmodule)mounting structure and tracking system, electronics and ,MCB,Arry junction box ,on off switch , interconnection cable ,complete asper MNRE approved technical specifications and direction of Engineer-in-Charge .(Note : The PV arry is to be installed on RCC roof of 3MX3M internal sized pump house with ceiling height 3M)

3 Core PVC insulated , PVC sheathed copper conductor flat submersible cable.Supplying flat flexible submersible cable with, copper conductor ,PVC insulated, and PVC sheathed 3 core 4 sq mm CB 1-3

Part B ( Boring Portion) Hydrological Survey for identification of aquifer layer

HYDT:Cost of drilling 200mmX165mmX125meter deep bore well in all kinds of soil and rock in rural area for installation of pump set with Hydraulic DTH Rig area for installation of pump set with Hydraulic DTH rig machine, all complete including supplying all materials tools, drilling rig, Air compressor and equipments, as well as fuel, lubricants and cost of transportation of rig machine and other vehicle up to the site. (a) from 0-50 meter( JSOR-sanitation-15-115(i))

HYDT: Cost of drilling 200mmX165mmX125meter deep bore well in all kinds of soil and rock in rural area for installation of pump set with Hydraulic DTH Rig area for installation of pump set with Hydraulic DTH rig machine, all complete including supplying all materials tools, drilling rig, Air compressor and equipments, as well as fuel, lubricants and cost of transportation of rig machine and other vehicle up to the site.(b) 51.00M to 125.00M G.I.( JSOR-sanitation-15-115(ii))

HYDT: Cost of drilling 200mmX165mmX125meter deep bore well in all kinds of soil and rock in rural area for installation of pump set with Hydraulic DTH Rig area for installation of pump set with Hydraulic DTH rig machine, all complete including supplying all materials tools, drilling rig, Air compressor and equipments, as well as fuel, lubricants and cost of transportation of rig machine and other vehicle up to the site.(c) 126.00M to250.00M G.I.( JSOR-sanitation-15-115(ii))

Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel screwed and socketed/ plain ended casing pipes of required dia, conforming to IS: 4270, of reputed & approved make, including painted with outside surface with two coats of anticorrosive paint of approved brand and manufacture, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer-in-charge. 200 mm nominal size dia aving minimum wall thickness 5.40 mm DSR 24.10.3

Providing and fixing MS Cap of required dia to the top of the casing Pipe. Analysis based on 24.14.3

Providing of Chlorinated polyuvinyl Choride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threated fittings. 50 mm nominal outer dia. Pipes DSR Code-8641

Providing and fixing M.S. clamp of required dia to the top of casing/housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete.24.14.3 200 mm clamp.

Labour charged for lowering of 100m PVC pipe, submersible motor, pump, cable adopter etc. with testing of electric, hekper etc all complete job.( Analysis rate)

Supply of Plastic Rope 20mm dia

Part C ( Overhead PVC water tank) Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.

Supplying and filling in plinth with Jamuna sand under floors, including watering, ramming, consolidating and dressing complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 fine sand : 6 graded stone aggregate 40 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :(1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars

Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.(DSR-14-10.1)

Providing and fixing bolts including nuts and washers complete.

Welding by gas or electric plant including transportation of plant at site etc. complete.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : 13.62.1 Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.25 mm nominal outer dia Pipes

Providing and fixing brass bib cock of approved quality : 18.15.1 15 mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 18.17.1 25 mm nominal bore

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Lettering with black Japan paint of approved brand and manufacture

Part-D ( Platform, Drain and soakpit) Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.

Supplying and filling in plinth with Jamuna sand under floors, including watering, ramming, consolidating and dressing complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 fine sand : 6 graded stone aggregate 40 mm nominal size)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in :cement mortar 1:4 (1 cement : 4 coarse sand)

12 mm cement plaster finished with a floating coat of neat cement of mix : 1:4 (1 cement: 4 fine sand

Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. 19.32.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Total impact of GST for the purpose of CTC

BISHUN DEO GOPE

M/s Mritunjay Yadav