Waghai ahwa road 59/6 to 93/0 (Pro. Crash barrier, road safety and other misc. work)

Name of Work:- Waghai ahwa road 59/6 to 93/0 ( Pro. Crash barrier , road safety and other misc

: : BILL OF QUANTITY.' : :

Percentage Rate Tender

It. Description of Item (with brief Specification and Rate In

Quantity Unit Amount

No. reference to book of specifications) Figures

1 Solar Stud: Supplying of Solar Raised Pavement 375.00 Nos. 2088.68

Markers made of polycarbonate molded body with

circular shape, solar powered, LED self illumination in

degree illumination and reflective panels with micro

prismatic lens capable of providing total internal

reflection of the light entering the lens face in passive

mode. The marker shall support a load of 20000 kg

tested in accordance to ASTM D 4280. The marker

should be resistant to dust and water ingress

according to IP 65 standards and should withstand

temperatures in the range of 0 C to 70 C. Color of

lighting could be provided in red or yellow (amber) as

per requirement and typical frequency of blinking is

Hz. There should

be current losses of less than 20 micro-amperes at

2.4 V in sleep-charging mode to enhance the life of

the marker and a full charge should provide for a

minimum autonomy of 50 hours. The height, width

and length of the marker shall not be less than

mm x 100 mm x 100 mm. Also, the surface diameter

of the marker shall not be less than 100 mm

respectively. The weight of the marker shall not

exceed 0.5 Kilograms. Fixing will be by

drilling holes on the road for the shanks to go inside,

2 Direction (Junction) Sign :-Providing and fixing sign 8.00 Nos. 26572.09

boards made out of 2mm aluminium sheet / 4mm

ACP (Aluminum composite Panel); size 244x122

cms. rectangular as per design of IRC-67-2012. Pre

treated with phospheting process & acid etching;

coated with one coat of epoxy primer and two coats

of best quality epoxy paint ;reflectorised with Micro

Prismatic Grade retro refiectivesheeting of Type-11

as per ASTM D-4956 and latest

M.O.S.T.Specifications; 4.0mtr long (2 Nos.) stand

post of 75 x 75 x 6mm / 65NB Circular MS Pipe as

required and frame fabricated from suitable size iron

angle of 50 x 50 x 5mm; painted with bestquality

epoxy coatings in black and white bends. The details

of symbol foreach board shall be as per theinstruction

of engineer in charge. The fixing at site shall be in

1:2:4 CC blockof size 45 x 45 x 60 Cms. for each

leg.including excavation, curing etc.complete under

the supervision of engineer in charge. A warranty for

10 years for the Retro reflective sheeting from original

manufacturer & a certified copy of 3 year outdoor

exposure test report from third party test lab for the

product offered shall be submitted by contractor. (A)

Class-C Type-11 Retro Reflective sheeting

3 Cautionary Warning Sign :-Providing and fixing sign 4.00 Nos. 5077.27

boards made out of 2mm aluminium sheet / 4mm

ACP (Aluminum composite Panel); size 90 x 90 x

cms. equilateral triangle as per design of IRC-67-

2012. Pre treated with phospheting process & acid

etching; coated with one coat of epoxy primer and

two coats of best quality epoxy paint ;reflectorised

with Micro Prismatic Grade retro refiectivesheeting of

Type-11 as per ASTM D-4956 and latest

M.O.S.T.Specifications; 3.6mtr long stand post of

x 75 x 6mm / 65NB Circular MS Pipe as required and

frame fabricated from suitable size iron angle of 35 x

35 x 3mm; painted with bestquality epoxy coatings in

black and white bends. The details of symbol foreach

board shall be as per theinstruction of engineer in

charge. The fixing at site shall be in 1:2:4 CC blockof

size 45 x 45 x 60 Cms. for each leg.including

excavation, curing etc.complete under the

supervision of engineer in charge. A warranty for

years for the Retro reflective sheeting from original

manufacturer & a certified copy of 3 year outdoor

exposure test report from third party test lab for the

product offered shall be submitted by contractor. (A)

Class-C Type-11 Retro Reflective sheeting

4 Hazard Marker Sign :-Providing and fixing sign 8.00 Nos. 3666.30

boards made out of 2.0 mm aluminium sheet / 4 mm

ACP (Aluminum composite Panel); size 90x30 cms.

rectangular as per design of IRC-67-2012. Pre

treated with phospheting process & acid etching;

coated with one coat of epoxy primer and two coats

of best quality epoxy paint ;reflectorised with Micro

Prismatic Grade retro refiectivesheeting of Type-11

as per ASTM D-4956 and latest

M.O.S.T.Specifications; 1.8mtr long stand post of

x 75 x 6mm / 65NB Circular MS Pipe as required and

frame fabricated from suitable size iron angle of 35 x

35 x 3mm; painted with bestquality epoxy coatings in

black and white bends. The details of symbol foreach

board shall be as per theinstruction of engineer in

charge. The fixing at site shall be in 1:2:4 CC blockof

size 45 x 45 x 60 Cms. for each leg.including

excavation, curing etc.complete under the

supervision of engineer in charge. A warranty for

years for the Retro reflective sheeting from original

manufacturer & a certified copy of 3 year outdoor

exposure test report from third party test lab for the

product offered shall be submitted by contractor. (A)

Class-C Type-11 Retro Reflective sheeting

5 Village Name Sign :-Providing and fixing sign boards 2.00 Nos. 6313.51

made out of 2mm aluminium sheet / 4mm ACP

(Aluminum composite Panel); size 90x60 cms.

rectangular as per design of IRC-67-2012. Pre

treated with phospheting process & acid etching;

coated with one coat of epoxy primer and two coats

of best quality epoxy paint ;reflectorised with Micro

Prismatic Grade retro refiectivesheeting of Type-11

as per ASTM D-4956 and latest

M.O.S.T.Specifications; 3.3mtr long stand post of

x 75 x 6mm / 65NB Circular MS Pipe as required and

frame fabricated from suitable size iron angle of 35 x

35 x 3mm; painted with bestquality epoxy coatings in

black and white bends. The details of symbol or

inscription/letters / numerals for each board shall be

as per the instruction of engineer in charge. The

fixing at site shall be in 1:2:4 CC blockof size 45 x

x 60 Cms. for each leg.including excavation, curing

etc.complete under the supervision of engineer in

charge. A warranty for 10 years for the Retro

reflective sheeting from original manufacturer & a

certified copy of 3 year outdoor exposure test report

from third party test lab for the product offered shall

be submitted by contractor. (A) Class-C Type-11

Retro Reflective sheeting

6 Facility Informatory Sign :-Providing and fixing sign 8.00 Nos. 5906.48

boards made out of 2mm aluminium sheet / 4mm

ACP (Aluminum composite Panel); size 80 x 60 cms

rectangular as per design of IRC-67-2012. Pre

treated with phospheting process & acid etching;

coated with one coat of epoxy primer and two coats

of best quality epoxy paint ;reflectorised with Micro

Prismatic Grade retro refiectivesheeting of Type-11

as per ASTM D-4956 and latest

M.O.S.T.Specifications; 3.6mtr long stand post of

x 75 x 6mm / 65NB Circular MS Pipe as required and

frame fabricated from suitable size iron angle of 35 x

35 x 3mm; painted with bestquality epoxy coatings in

black and white bends. The details of symbol foreach

board shall be as per theinstruction of engineer in

charge. The fixing at site shall be in 1:2:4 CC blockof

size 45 x 45 x 60 Cms. for each leg.including

excavation, curing etc.complete under the

supervision of engineer in charge. A warranty for

years for the Retro reflective sheeting from original

manufacturer & a certified copy of 3 year outdoor

exposure test report from third party test lab for the

product offered shall be submitted by contractor. (A)

Class-C Type-11 Retro Reflective sheeting

7 Regulatory / Mandatory Sign :-Providing and fixing 12.00 Nos. 4618.73

sign boards made out of 2mm aluminium sheet / 4mm

ACP (Aluminum composite Panel); size 60 cms Dia

Circle as per design of IRC-67-2012. Pre treated with

phospheting process & acid etching; coated with one

coat of epoxy primer and two coats of best quality

epoxy paint ;reflectorised with Micro Prismatic Grade

retro refiectivesheeting of Type-11 as per ASTM D-

4956 and latest M.O.S.T.Specifications; 3.6mtr long

stand post of 75 x 75 x 6mm / 65NB Circular MS Pipe

as required and frame fabricated from suitable size

iron angle of 35 x 35 x 3mm; painted with bestquality

epoxy coatings in black and white bends. The details

of symbol foreach board shall be as per theinstruction

of engineer in charge. The fixing at site shall be in

1:2:4 CC blockof size 45 x 45 x 60 Cms. for each

leg.including excavation, curing etc.complete under

the supervision of engineer in charge. A warranty for

10 years for the Retro reflective sheeting from original

manufacturer & a certified copy of 3 year outdoor

exposure test report from third party test lab for the

product offered shall be submitted by contractor. (A)

Class-C Type-11 Retro Reflective sheeting

8 STOP Sign :-Providing and fixing sign boards made 4.00 Nos. 7213.42

out of 2mm aluminium sheet / 4mm ACP (Aluminum

composite Panel); size 90 cms Octagone as per

design of IRC-67-2012. Pre treated with phospheting

process & acid etching; coated with one coat of

epoxy primer and two coats of best quality epoxy

paint ;reflectorised with Micro Prismatic Grade retro

refiectivesheeting of Type-11 as per ASTM D-4956

and latest M.O.S.T.Specifications; 3.6mtr long stand

post of 75 x 75 x 6mm / 65NB Circular MS Pipe as

required and frame fabricated from suitable size iron

angle of 35 x 35 x 3mm; painted with bestquality

epoxy coatings in black and white bends. The details

of symbol foreach board shall be as per theinstruction

of engineer in charge. The fixing at site shall be in

1:2:4 CC blockof size 45 x 45 x 60 Cms. for each

leg.including excavation, curing etc.complete under

the supervision of engineer in charge. A warranty for

10 years for the Retro reflective sheeting from original

manufacturer & a certified copy of 3 year outdoor

exposure test report from third party test lab for the

product offered shall be submitted by contractor. (A)

Class-C Type-11 Retro Reflective sheeting

9 Chevron sign :-Providing and fixing sign boards made 150.00 Nos. 4681.35

out of 1.5mm aluminium sheet / 3mm ACP (Aluminum

composite Panel); size 60x50 cm as per design of

IRC-67-2012. Pre treated with phospheting process &

acid etching; coated with one coat of epoxy primer

and two coats of best quality epoxy paint

;reflectorised with Micro Prismatic Grade retro

refiectivesheeting of Type-11 as per ASTM D-4956

and latest M.O.S.T.Specifications; 3.3 mtr long stand

post of 75 x 75 x 6mm / 65NB Circular MS Pipe as

required and frame fabricated from suitable size iron

angle of 50 x 50 x 5mm; painted with bestquality

epoxy coatings in black and white bends. the details

of symbol or inscription / numerals for each board

shall be as per the instruction of engineer in

charge.The fixing at site shall be in 1:2:4 CC blockof

size 45 x 45 x 60 Cms. for each leg.including

excavation, curing etc.complete under the

supervision of engineer in charge. A warranty for

years for the Retro reflective sheeting from originaa

manufacturer & a certified copy of 3 year outdoor

exposure test report from third party test lab for the

product offered shall be submitted by contractor. (A)

Class-C Type-11 Retro Reflective sheeting

10 Route Marker sign :-Providing and fixing sign boards 6.00 Nos. 5108.58

made out of 2.0 mm aluminum sheet / 4 mm ACP

(Aluminum composite Panel); size 60x45 cm

rectangular plus 30x25cm additional plate as per

design of IRC-67-2012. Pretreated with phosphating

process & acid etching; coated with one coat of

epoxy primer and two coats of best quality epoxy

paint ;reflectorised with Micro Prismatic Grade retro

reflective sheeting of Type-11 as per ASTM D-4956

and latest M.O.S.T. Specifications; 3.6 mtr long stand

post of 75 x 75 x 6mm / 65NB Circular MS Pipe as

required and frame fabricated from suitable size iron

angle of 35x 35 x 3mm; painted with best quality

epoxy coatings in black and white bends. the details

of symbol or inscription / numerals for each board

shall be as per the instruction of engineer in charge.

The fixing at site shall be in 1:2:4 CC block of size

x 45 x 60 Cms. for each leg. including excavation,

curing etc. complete under the supervision of

engineer in charge. A warranty for 10 years for the

Retro reflective sheeting from original manufacturer &

a certified copy of 3 year outdoor exposure test report

from third party test lab for the product offered shall

be submitted by contractor. (A) Class-C Type-11

11 Retro Reflective

Providing sheeting

and erecting a double raw "W" metal beam 2070.00 rmt 5412.59

crash barrier comprising of 3 mm thick corrugated

sheet metal beam rail, 70cm above road/ground

level, fixed on ISMC series channel vertical post,

150X75X5 mm spaced 2 m centre to centre, 1.8 m

high, 1.1 m below ground/road level, all steel parts

and fitments to be galvanised by hot dip process, all

fitting to conform to IS:1364, metal beam rail to be

fixed on the vertical post with a spacer of channel

section 150X75X5 mm, 330mm long complete as per

clause 810. ( W - Double Beam Crash Barrier for

Approch and Road Portion )

12 Providing and fixing 'W' type safety barrier using M.S. 1200.00 rmt 2790.86

iron channel 150mm x 75m x 5mm size erected at

Mt. center to center and providing 'W' shaped

galvanised steel sheet guard rail 3mm thick for crash

barrier in single row as per detailed drawing with

fabrication and installation charges including

providing foundation block of size 0.60 x 0.60 x

Mt. in C.C. 1:2:4 and oil painting two coats with one

coat of red oxide etc complete.

I / Weam / are willing to carryout the work at…………………. % above/ below percent (Should Be written in

figures and words) of the estimated rate mentioned above Amount of my / our tender works out as under.

*Estimated amount put to tender *Estimated amount put to tender

Deduct ……. % below Rs…………………… Add ………........% Above

*( please strike out whichever is not applicable)

1 The Contractor shall exhibition board with detailed specification and details of works directed by

the Engineer – In – Charge for which no extra payment shall bemade.

2 The labourcess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills.

4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt G.R.:

PRC-10/2017 Cement Consumption/16/C Date: 11/05/2017 as stated in S.O.R. therefore in R.C.C. items

where the reisa change as per actual mix design the cost of difference of cement consumption have been

deducted from the rate of original item at the rate of input rate mentioned in all the tender.

Executive Engineer

Signature of the contractor Dang ( R&B ) Division