Sardar Sarovar (Narmada) Project

BILL OF QUANTITIES

(A) Percentage Rate Tender (Up to INR 50 Crore)

Name of Division: Executive Engineer, S.B.C. Dn. No. 3/1, Botad.

Construction of Road Diversion Work of SHRB at Ch. 73.840 km and MDRB at Ch.

80.924 km of Botad Branch Canal.

Qty. Description of Item Unit Amount in Rs.

Earth work/Back filling with selected earth brought

from out side borrow area or from excavated useful

1 3818.00 material incl. watering,ramming,Compaction with Cum 141.00

pnumatic temping and all lead and lift etc

Excavation in all sort of strata and formations incl.

depositing the unuseful excavated stuff as and

where directed incl sorting 1 and stacking useful

materials as directed upto 30 mt lead etc. complete

incl. dewatering. (Depth 0 TO 3.0 mt ) (For all type

canal & foundation trenches of C.D. works ) A) IN

OVERBURDEN INCL. HARD MURRUM.

Supplying and fixing reinforced concrete heavy duty

non pressure pipes with collars for culverts

including setting and joining the pipes in C.M. 1:2

3 72.00 watering and laying (To level of slops of I.S. 458 / Rmt 10681.52

1971 Class NP4 of following internal diameter.(viii)

Type - A, "W" : Metal Beam Crash Barrier

(Providing and erecting a "W" metal beam crash

barrier comprising of 3 mm thick corrugated sheet

metal beam rail, 70 cm above road/ground level,

fixed on ISMC series channel vertical post, 150 x

x 5 mm spaced 2 m centre to centre, 1.8 mhigh,

m below ground/road level, all steel parts and

fitments to be galvanised by hot dip process, all

fittings to conform to IS:1367 and IS:1364, metal

beam rail to be fixed on the vertical post with a

spacer of channel section 150 x 75 x 5 mm, 330 mm

long complete as per clause 811)

SIGNATURE OF CONTRACTOR 159 SIGN. OF ENGINEER-IN-CHARGE

Supplying and fixing road sign board of M.S. plates

and angle iron including painting, lettering etc.

5 36.00 complete including fixing in C.C. 1:4:8 with Each 3072.99

necessary excavation etc. complete as per I.R.C.

type design. (ii) Reflective type

Providing,cutting,bending,binding and fixing in

position as per drawing. TMT BAR , Fe-415

6 44.00 reinforcement for R.C.C. works and anchor bars incl MT 66268.00

cost of black annealed 16 to 18 BWG M.S.. Wire

etc.complete with all lead and lift.

Prov. and Laying in position Controlled cement

concrete using cement, sand and crushed

aggregate by mass and machine mix for R.C.C/CC

7 946.00 work including necessary formworks centering Cum 4303.00

scaffolding compaction by vibrator,curing as

directed with all lead & lift etc complete A)

Concrete grade M-15 and MSA-20mm

Construction of Granular Sub Base (GSB) by

providing Well graded material of grading-II,

8 696.00 spreading in uniform layers on prepared surface, Cum 682.42

mixing, watering and compacting etc. complete

as per specification or as directed.

Prov. and Laying in position Controlled cement

concrete using cement, sand and crushed

aggregate by mass and machine mix for R.C.C/CC

9 425.00 work including necessary formworks centering Cum 5372.00

scaffolding compaction by vibrator,curing as

directed with all lead & lift etc complete

A) Concrete grade M-25 and MSA-20mm

Providing, supplying, Lowering, and laying ISI

Standard R.C.C. NP-3 Class pipes in standard

lengths of following Diameter suitable for either

collar joints or rubber ring joints including all taxes,

insurance, transportation, freight charges, octroi,

10 60.00 inspection charges, loading, unloading, conveyance Rmt 3969.00

to Site, and jointing in proper position, grade and

alignment at all level as directed by Engineer-in-

charge including all labour, giving hydraulic testing

as per ISI code. (G) 900 mm dia.

SIGNATURE OF CONTRACTOR 160 SIGN. OF ENGINEER-IN-CHARGE

Providing & laying dry rubble pitching with 20 cms

gravel/metal and 20 cms sand layers as base of

inverted graded filter and without header stone but Sq.

incl. hand packing trimming & dressing of slopes mt

etc complete (a) 30cms thick stone pitching

Providing & filling Asphalt Joint of the approved

make and sand in the expansion and contraction

12 612.00 joints in the C.C. Lining including clearing the joints Mt. 68.03

with air water jet.

Total cost of work Rs.

I/We/ am/are willing to carry out the work at…................. %above/below percent (Should

be written in figures and words)of the estimated rate mentioned above. Amount of my/our

tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………%below Add………%Above

In words In words

(B) For Item Rate Tender (For above INR 50 Crore):

Item Description of Item Quantity Unit Rate Amount

No (with brief specification In In

and reference to book of figures Words

specifications)

------------------------As per Separate sheet attached-------------------------

(A)Total Tendered Amount

(B)Rebate on above tendered amount (if any)%(in

figure)……………………………… (in

(C)Net Tendered Amount (A-B)(in figure)………………………………

SIGNATURE OF CONTRACTOR 161 SIGN. OF ENGINEER-IN-CHARGE

1 The Contractor shall exhibit a board with detailed specification and details of work as

directed by the Engineer-In-Charge for which no extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payment of bills

4 In all P.C.C./R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as

per vernacular office letter no. 04 of 2024, Dt. 20/01/2024 of The Chief Engineer, Quality

Control (SSNNL) as stated in S.O.R. therefore in P.C.C./R.C.C. items where there is a change

as per Nominal mix the cost of difference of cement consumption have been deducted from the

rate of original item at the rate of input rate (i.e. 5448.53 Rs / MT for OPC) in all the tender.

SIGNATURE OF CONTRACTOR 162 SIGN. OF ENGINEER-IN-CHARGE