Shifting of Transformers,HT/LT lines from Sankar chowmuhani to Akhuara Khal North Side under Electrical Sub division no III, Agartala

Amount

SCHEDULE - A (Supply)

Supply of 3- Phase, 3 core 6.35/11 KV ,240 sqmm XLPE insulated & Insulation screened Aluminium Power Cable Conductor as per IS 7098/II/1985 and latest amendment.

Supply of 200 mm dia, HDPE pipe as per PE-100 grade, PN 8 ,wall thickness: minimum:11.8 mm, maximum: 13.1 mm

Supplying and Making Outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for 3 core, 240 sqmm XLPE aluminium conductor cable of 11 KV grade as required

Supplying and Making Indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for 3 core, 240 sqmm XLPE aluminium conductor cable of 11 KV grade as required

Supplying and Making Straight through cable jointing with heat shrinkable jointing kit complete with all accessories including lugs suitable for 3 core, 240 sqmm XLPE aluminium conductor cable of 11 KV grade as required

Supply of 4 Way,(1 incoming, 3 Outgoing),630 A, HT Kiosk/ 11 KV outdoor Type Feeder pillar made of 10 SWG MS Sheet complete with Aluminium Busbar,HT Insulator etc. as required provided with locking system and painting,to be filled in structure of MS Angle (50x50x6 mm) & MS flat(40x6 mm) including supply of MS Angle and MS Flat as required and supply of cement,river sand & Jhama bricks in the ratio 1:2:4 (1 cement: 2 river sand: 4 Jhama bricks aggregate with 20 mm nominal size) for concreting each leg of Kiosk.

Supply of 2.5 mtr. Long,40 mm dia GI Pipe (Make: TATA/JINDAL) for earthing

Supply of 60 Kg Salt & 55 Kg Charcoal ( for 1 Pit) for earthing

Supply of Fabricated clamps of assorted size of MS flat (50x6 mm) with double coat of Red oxide primer coating

Supply of MS Nuts & Bolt i/c washer of assorted size ISI marked machine made

Supply of 50X50X6 mm M.S. Angle confirming to IS:2062, Grade 'A' quality.

Supply of 11.0 mtr. Long steel tubular pole with base plate. (Designation 410:SP-55) conforming to IS : 2713 (Part -I & II) :1980 and latest amendment.

SCHEDULE -B (Dismantling and Erection)

Dismantling of11 Mtr. Length of steel tubular pole at any kind of soil including excavation of earth , refilling the pit with soil upto ground level, ramming and making complete in all respect.

Dismantling of 9.0 Mtr. Length of steel tubular pole at any kind of soil including excavation of earth , refilling the pit with soil upto ground level, ramming and making complete in all respect.

Dismantling of 8.0 Mtr. Length of steel tubular pole at any kind of soil including excavation of earth , refilling the pit with soil upto ground level, ramming and making complete in all respect.

Dismantling of 8.0 Mtr. Length of P.C.C. pole at any kind of soil including excavation of earth , refilling the pit with soil upto ground level, ramming and making complete in all respect.

Dismantling of MS channel cross arm, 0.8 mtr.Long,(100x50x50x6) mm / S/S Bracket

Dismantling of MS channel cross arm,2.8 mtr.Long, (100x50x50x6)mm / S/S Bracket

Dismantling of MS channel cross arm,2.2 mtr.Long,(100x50x50x6) mm / HT line Bracket

Dismantling of MS channel cross arm,1.6 mtr.Long, (100x50x50x6)mm / HT line Bracket

Dismantling of MS channel cross arm,0.6 mtr.Long, (100x50x50x6)mm / HT Line Bracket

Dismantling of V-cross arm,75x40x40x6 mm MS channel

Dismantling of MS channel cross arm, 0.3 mtr.Long,(75x40x40x6) mm / Ht line bracket

Dismantling of MS channel cross arm, 1.6 mtr.Long,(75x40x40x6) mm / HT line Bracket

Dismantling of MS channel cross arm, 2.8 mtr.Long,(75x40x40x6) mm / S/S Bracket

Dismantling of MS channel cross arm, 2.2 mtr.Long,(75x40x40x6) mm / HT line bracket

Dismantling of MS Angle cross arm,0.8 mtr.Long,(65x65x6) mm / HT line Bracket

Dismantling of MS Angle cross arm,1.0 mtr.Long,(65x65x6) mm / HT line Bracket

Dismantling of MS Angle cross arm,2.5 mtr.Long,(65x65x6) mm / HT line Bracket

Dismantling of MS Angle cross arm,2.2 mtr.Long,(65x65x6) mm / HT line Bracket

Dismantling of MS Angle cross arm,1.6 mtr.Long,(65x65x6) mm/ HT SP Guard Bracket

Dismantling of MS Angle cross arm,2.8 mtr.Long,(65x65x6) mm / S/S Bracket

Dismantling of MS Angle Cross Bracing, (1.5 mtr- 1.8 mtr.) long,(50x50x6 ) mm

Dismantling of MS Angle cross arm,1.5 mtr.Long,(50x50x6) mm / LT Bkt.

Dismantling of MS Angle cross arm,1.6 mtr.Long,(50x50x6) mm / Guard Bkt.

Dismantling of 11 KV Pin insulator along with pin

Dismantling of 11 KV single Disc Insulator with necessary fittings.

Dismantling of "C" type bracket for LT 6-wire

Dismantling of 2 wire LT Bracket

Dismantling of 4 wire LT Bracket

Dismantling of LT pin Insulator

Dismantling of shackle isulator of size 75mmx90 mm/ 100mmx15mm with straps & bolts/U clamp on poles

Dismantling of ACSR 6/1/3.35 mm dia RABBIT i/c coiling etc. complete as required

Dismantling of ACSR 6/1/2.59 mm dia WEASEL i/c coiling etc. complete as required

Dismantling of 11/0.43 KV,3-Phase 100 KVA of Distribution Transformer on pole with necessary connections

Dismantling of AB Cable (120 Sq. mm) of 11 KV grade

Dismantling of suspension clamp of AB Cable (120 Sq. mm) of 11 KV grade

Dismantling of 11 KV , XLPE , cable riser

Dismantling of 11KV ,200 Amps GOS unit set of three nos. including necessary connection.

Dismantling of 11KV DOF unit set of three nos. including necessary connection.

Dismantling of 9 KV,5 KA single pole metal oxide gapless Type LA,including necessary connection complete as per technical specification

Dismantling of single phase service connections with PVC cable from near by electrical pole to premises i/c GI wire,Reel insulator including Refixing.

Dismantling of three phase service connections with PVC cable from near by electrical pole to premises i/c GI wire,Reel insulator including Refixing.

Erection of 11 Mtr. Length of steel tubular pole at any kind of soil including excavation of earth , refilling the pit with soil upto ground level, ramming and making complete in all respect.

Erection of 9.0 Mtr. Length of steel tubular pole at any kind of soil including excavation of earth , refilling the pit with soil upto ground level, ramming and making complete in all respect.

Erection of 8.0 Mtr. Length of steel tubular pole at any kind of soil including excavation of earth , refilling the pit with soil upto ground level, ramming and making complete in all respect.

Erection of 8.0 Mtr. Length of P.C.C. pole at any kind of soil including excavation of earth , refilling the pit with soil upto ground level, ramming and making complete in all respect.

Erection of MS channel cross arm, 2.2 mtr.Long,(100x50x50x6) mm / HT line Bracket

Erection of MS channel cross arm, 1.6 mtr.Long, (100x50x50x6)mm / HT line Bracket

Erection of MS channel cross arm, 0.6 mtr.Long, (100x50x50x6)mm / HT Line Bracket

Erection of V-cross arm,75x40x40x6 mm MS channel

Erection of MS channel cross arm, 0.3 mtr.Long,(75x40x40x6) mm / HT line bracket

Erection of MS channel cross arm, 1.6 mtr.Long,(75x40x40x6) mm / HT line Bracket

Erection of MS channel cross arm, 2.8 mtr.Long,(75x40x40x6) mm / S/S Bracket

Erection of MS channel cross arm, 2.2 mtr.Long,(75x40x40x6) mm / HT line bracket

Erection of MS Angle cross arm,0.8 mtr.Long,(65x65x6) mm / HT line Bracket

Erection of MS Angle cross arm,1.0 mtr.Long,(65x65x6) mm / HT line Bracket

Erection of MS Angle cross arm,2.5 mtr.Long,(65x65x6) mm / HT line Bracket

Erection of MS Angle cross arm,2.2 mtr.Long,(65x65x6) mm / HT line Bracket

Erection of MS Angle cross arm,1.6 mtr.Long,(65x65x6) mm/ HT SP Guard Bracket

Erection of MS Angle cross arm,2.8 mtr.Long,(65x65x6) mm/ S/S Bracket

Erection of MS Angle Cross Bracing, (1.5 mtr- 1.8 mtr.) long,(50x50x6 ) mm

Erection of MS Angle cross arm,1.5 mtr.Long,(50x50x6) mm / LT Bkt.

Erection of MS Angle cross arm,1.6 mtr.Long,(50x50x6) mm / Guard Bkt.

Erection of 11 KV Pin insulator along with pin

Erection of 11 KV single Disc Insulator with necessary fittings.

Erection of "C" type bracket for LT 6-wire

Erection of 2 wire LT Bracket

Erection of 4 wire LT Bracket

Erection of shackle isulator of size 75mmx90 mm/ 100mmx15mm with straps & bolts/U clamp on poles

Laying and Stringing of ACSR 6/1/3.35 mm dia RABBIT i/c hoisting & binding etc. complete as required

Laying and Stringing of ACSR 6/1/2.59 mm dia WEASEL i/c hoisting & binding etc. complete as required

Installation / positioning of 11/0.43 KV,3-Phase 100 KVA of Distribution Transformer on pole with necessary connections & fitting/ fixing of all allied accessories /components as required for making complete in all respect for energizing

Laying,hoisting and drawing of of AB Cable (120 Sq. mm) of 11 KV grade as per direction of Engineer in charge.

Erection of suspension clamp of AB Cable (120 Sq. mm) of 11 KV grade

Erection of 11 KV , XLPE , cable riser

Erection of 11KV ,200 Amps GOS unit set of three nos. including necessary connection complete as per technical specification(Excluding cost of back clamp,nuts & bolts)

Erection of 11KV DOF unit set of three nos. including necessary connection complete as per technical specification(Excluding cost of back clamp,nuts & bolts)

Erection of 9 KV,5 KA single pole metal oxide gapless Type LA,including necessary connection complete as per technical specification

Earthing with GI pipe 2.5 mtr. Long nd 40 mm dia including excavation, refilling with alternate layer of salt & Charcoal as per drawing ( excluding Supply of G.I. pipe,Salt and Charcoal, GI wire nuts & bolts etc as required)

Laying of 8 SWG GI wire at 300mm below the ground level for earthing of Sub-Station equipments from the earth electrode.

Grouting of Steel Tubular pole with CC work of ratio1:2:4 ( one cement: two sand: four Jhamma Bricks) aggregate of 20 mm nominal size includung supply of cement, sand and brick aggregate complete with excavation,reffiting of earth ramming along with centering and shuttering as [email protected] cum/pole as per direction of Engg-in-Charge.

Fabrication of cross arms by MS channel/MS Angle as per specification

Repair and maintenance of power cable of 11 KV Voltage grade including excavation of earth, lift out of power cable,bricks etc. and laying & commisioning of existing power cable (of size above 150 sqmm upto 400 sq.mm) with supply of sand for cushioning / bed for cable, laying of lift out bricks for protection of cable including refilling of excavated earth and proper ramming. Trench size: Width= 500 mm, Height=1200 mm / New sand coushioning :width= 500 mm, Height= 300 mm

Laying of one number of XLPE power cable of 11 KV grade of 240 sqmm size, direct in ground including excavation,sand cushioning ,protective covering and refilling the trench etc. as required. Trench size: Width=350 mm , Height=1200 mm / Sand cushioning: Height=250 mm , Width= 350 mm / Protection: Double layer Bricks.

Machine / Manual Digging / drilling horizontally or diagonal direction for road crossing / Water supply line/ Telicommunication line / Gas pipe line etc. including Laying of 64 to 200 mm dia HDPE pipe direct into the earth at a depth of minimum 1100 mm below the ground surface with out effecting the exisiting road including excavation earth for entry pit as per site condition and direction of Engineering in Charge.

Laying of one number of XLPE power cable (of size 240 sqmm) in the HDPE for riser including tieup of Pipe with pole by the help MS Flat Clamp (exctuding cost of Clamp and Nut&Bolts) as required

Erection of 4 Way,(1 incoming, 3 Outgoing),630 A HT Kiosk/ 11 KV outdoor Type Feeder pillar made of 10 SWG MS Sheet complete with Aluminium Busbar,HT Insulator etc. as required provided with locking system and painting,to be filled in structure of MS Angle(50x50x6 mm) & MS flat(40x6 mm) and concreting each leg of kiosk in the ratio 1:2:4 ( 1 cement: 2 river sand:4 Jhama Bricks aggregate with 20 mm nominal size) including centering,shuttering & Disposal of excess excavated soil

SCHEDULE-C (Carrying)

Carriage of 8.00 mtr. Length of Steel tubular poles by mechanical Transport from ESD Site / MM Sub-Division Store to working site including loading,Unloading & placing on Base etc. as required.

Carriage of materials such as cable,AAC,AAAC,ACSR,GI Wire wire,Cross Arm,Stay set,Insulators etc. by mechanical Transport from the ESD site/ MM sub-division Store to working site i/c loading,unloading & stacking as required.

Carriage of G.O.S., D.O.F., L.A. etc. by mechanical Transport from the ESD site/ MM sub-Division Store to working site i/c loading,unloading & stacking as required.

Carriage of 11.00 mtr. Length of Steel tubular poles (dismantled) by mechanical Transport from working site to ESD yard including loading,Unloading & stacking etc. as required for maiximum 6(six) poles.

Carriage of 11.00 mtr. Length of Steel tubular poles (dismantled) by mechanical Transport from working site to ESD yard including loading,Unloading & stacking etc. as required for beyond 6(six) poles.

Carriage of 8.00 mtr. Length of Steel tubular poles (dismantled) by mechanical Transport from working site to ESD yard including loading,Unloading & stacking etc. as required.

Carriage of materials (dismantled) such as cable,AAC,AAAC,ACSR,GI Wire wire,Cross Arm,Stay set,Insulators etc. by mechanical Transport from to working site to ESD yard i/c loading,unloading & stacking as required.

Carriage of G.O.S., D.O.F., L.A. etc.(dismantled) by mechanical Transport from working site to ESD yard i/c loading,unloading & stacking as required.

RATAN PAUL