Construction of Potu, Ugranam and Vahanam Shed at Sri Venkateswara Swamy Temple Nimmakuru, Krishna District

Earth work excavation in Ordinary soil by manual means up to 3 m depth for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work

Filling with useful available excavated earth (excluding rock) in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T&P etc., complete for finished item of work.

Filling of foundations and basement with best river sand in layers of not more than 15 cms. thick each well watered to saturation and consolidated including cost and conveyance of all materials, incidental charges etc., complete.

Cement Concrete (1:4:8) using 40 mm ( 0.54 cu.m), 20mm (0.27 cu.m) and 12 mm (0.09 cu.m) nominal size hard broken granite crushed metal from any source conforming to the relevant ISI standards for foundations etc., laid in layers of not more than 15 cms thick well compacted including curing, ,machine mixing, cost and conveyance of all materials etc., complete.using concrete mixer.Note: Measurement boxes shall be used for measuring the quantities of cement, aggregate and water required for the given concrete mix.

Cement Concrete (1:3:6) using 20 mm ( 0.54 cu.m), 12mm (0.27 cu.m) and 10 mm (0.09 cu.m) nominal size hard broken granite crushed metal from any source conforming to the relevant ISI standards for foundations etc., laid in layers of not more than 15 cms thick well compacted including Shuttering, curing, ,machine mixing, cost and conveyance of all materials etc., complete.using concrete mixer.Note: Measurement boxes shall be used for measuring the quantities of cement, aggregate and water required for the given concrete mix.

Supply and placing of M 25 Design Mix Concrete corresponding to IS 456 using concrete mixer using of 20 mm HBG crushed metal 0.530 cu.m (707 kg),. 10 mm HBG crushed metal, 0.362 cu.m (471 kg) , sand 0.407 cu.m (616 kg.) and cement 380 kg with water cement ratio of 0.48 ( 182.40 ltrs/ cu.m of CC) etc., to site and including sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, vibrating, laying concrete, curing etc., complete with cement from standard suppliers approved by the department but excluding cost of centering, shuttering charges and excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402). Note: Measurement boxes shall be used for measuring the quantities of cement, aggregate and water required for the given concrete mix if mixing is done by volume mixing.

Note : The design mix shall be got designed by furnishing the information required as per clause 19.1.1 &19.1.2 of IS 456-2000 by the contractor at his own cost and get approved from the competent authority before execution. The cement considered for above M25 grade concrete is 380 kg/cu.m and the rate is arrived accordingly in the estimate. After the mix is designed and approved, if there is any variation in the quantity of cement, over the cement content adopted in the estimate, the same will be considered and paid/recovered at estimate rate + T.P ( Either increase or decrease in quantity adopted in the estimate). Payment will not be made for variation in the quantity of other materials such as coarse & Fine aggregates..

- do - for Column Footings

For Plinth beams

- do - for Columns upto basement

- do - for Columns in First floor

- do - For T, L, or Rectangular beams in First Floor

- do - for Roof slabs in First Floor ( excluding Centering charges)

RCC M- 20 Design mix using 20mm HBG crushed metal 0.480 cu.m , 10mm HBG crushed metal 0.320 cu.m , sand 0.400 cu.m and cement 350 kg with water cement ratio of 0.53 (185.5 Lit per cu.m of CC ) etc. horizontal plain sunshades or lofts projecting from the face of the wall 65mm average thickness,80mm thick at the face of the wall and 50mm thick at the free end and cast monolithically with the lintels or tailed to the full thickness of the wall where there are no lintels using 20mm size graded machine crushed hard granite metal (coarse aggregate) from any source conforming to the relevant ISI standards including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing , etc.,complete, but excluding cost of centering charges and excluding cost of steel and its fabrication charges for finished item of work.

Supply and placing of the Design Mix Concrete M 20 corresponding to IS 456 using concrete mixer with 10mm size graded machine crushed hard granite metal (coarse aggregate) from any source conforming to the relevent ISI standards including cost and conveyance of all mterials like cement, fine aggregare (sand) coarse aggregate, water etc., to site and including Seignoirage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, vibrating, laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges, centering charges for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department.graded aggregate HBG crushed metal from any source conforming to the relevent ISI standards with necessary reinforcement, but including cost of necessary form work etc., complete as directed by the department.

-do - 50 mm thick precast slabs

Hire charges for Centering & scaffolding un supported height of 3.66 mtrs height using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates,etc., & staging including all bracings, cross members etc as per approved plan and other accessories as per the norms and stability calculations including cost and conveyance of all accessories etc. complete.

Providing High Yield Strength deformed (HYSD)/ Thermo mechancially treated (TMT) steel bars of specified grade (as per IS 1786 - 2008) of different diametres for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars including all wastages such as over laps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors. (APSS NO.126) (In the absence of 18G binding wire,2 nos of 20G binding wire in tandem are to be strictly adhered). Note: Unless otherwise fabrication and placement of steel, no pre-pament shall be made against the supply of steel reinforcement

Construction of Brick Masonry in C.M (1:6) using well burnt Bricks 2nd class or ground moulded (Non- modular or traditional size) (230 x 110 x 70 mm)including curing, cost and conveyance of all materials as directed during execution and complying with standard specifications etc., complete.

- do - in C.M. (1:6) upto basement

- do - in C.M(1:6) for super stucture in F.F

Plastering in using best river sand from approved source including cost and conveyance of all materials, screening, curing, rounding of corners, incidental charges as directed during execution complying with standard specification etc., complete for the following proportions.

-do- in C.M(1:5) 12 mm thick Up to basement

-do- in C.M(1:5) 12 mm thick in 1st floor

-do- in C.M(1:5) 20 mm thick Up to basement

-do- in C.M(1:5) 20 mm thick in 1st floor

Finishing the flooring with Granolithic cement Concrete (1:1:2) for 20 mm thick using 6mm to 12mm size HBG crushed metal laid over CC bed already laid or RCC roof slab, in alternate panels of size not exceeding 1.50 m X 1.50 m and finishing the top surface to required smoothness and slopes and thread lining including cost and conveyance of all materials like cement, metal, sand and water etc., complete for finished item of work.

Flooring with Galaxy Granite 18-20 mm thick upto 2.43M (Premium Quality) set over base coat of cement mortar (1:6)12mm thick over Cc bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 kgs per sqm & jointed neatly with white cement paste mixed with pigment of matching shade to depth, including cost & conveyance of all materials, seignorage charges etc., complete - for finished item of work.

Supplying and fixing in position bond wood Flush doors of different sizes with 30 mm thick Flush Door Shutters, solid bond wood black board type with teak veneer on one face and commercial ply on another face (lipping) of standard make Conforming to IS 2202 solid core flush doors , with Teak veneering one side and Commercial facing on other side with hot pressed bonded with liquid phenol formaldehyde with rebate cutting, Single leaf using Best Indian Country wood (Vepa/Neredu) frames of size 75mm x 100mm without threshold plate, including cost of M.S "Z" Hold fasts of 230 x 50 x 6mm M.S Powder coated Butt hinges of 125 x 65 x 2.12mm, screws, nails, etc., complete, (excluding cost of other fixtures which will be paid separately but including labour charges for fixing the fixtures).

painting two coats over a primary coat ( total three coats) with Acrylic emulsion paint Interior Grade having VOC (Volatile Organic Compound) content less than 50 grams/ litre of approved brand and shade after throughly brushing the surface to removal all dirt and remains of loose powdered materials , including cost and conveyance of all materials to work site and all operational , incidental , labour charges retc, complete for finished of work as per SS911 for internal walls

Painting two coats over a primary coat ( toatl three coats) with with Acrylic Emulsion paint Exterioir grade of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work as per SS 911 for new external walls.

Supplying & Fixing in position the following Aluminium Anodized Hard ware fittings including cost and conveyance of all materials, labour charges for fixing, etc., complete.

-do- Aluminium Aldrop (IS:2681) 300 mm long

-do- Aluminium Tower Bolt-10mm Bolt (IS:204) 250 mm long

Aluminium Door Handles (IS:208) 150 mm long

Supply PVC /SWR pipes & fittings ( as per ISI standards) 6kg/cm2 (Type-B)

110 mm dia 3 M Single socket pipe

Supply and fixing of UPVC 4" (101.6 mm ) Floor Trap with jali etc.,complete

Supply and fixing of Ahirvad/Ajay/Astral flowguard or euivalant CPVC pipes and fittings to meet the requirement of ASTM-D-2846 and are produced in CTS (Copper tube sizes 1/" to 2" Ahirvad flowguard SDR 11 to 13.5 pipes are made fromj idential CPVC compounds having the same physical properties for Hot and COld water (IS 15778: 2007)

- do - of 34.90 mm dia OD pipe SDR 13.5

- do - of 22.20 mm dia OD pipe SDR 13.5

- do - 15.90mm dia OD pipe SDR 13.5

Supplying & Fixing of 12.7 mm brass bib cock Indian make 300 grams

Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chamberedframe with in-built roller track and sash extruded profiles duly reinforcedwith 1.60 ± 0.2 mm thick galvanized mild steel section made from rollforming process of required length (shape & size according to uPVCprofile), appropriate dimension of uPVC extruded glazing beads anduPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (whitepowder coated) touch locks with hook, zinc alloy body with single nylonrollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mmsize for fixing frame to finished wall and necessary stainless steel screwsetc. Profile of frame & sash shall be mitred cut and fusion welded at allcorners, including drilling of holes for fixing hardware's and drainage ofwater etc. After fixing frame the gap between frame and adjacent finishedwall shall be filled with weather proof silicon sealent over backer rod ofrequired size and of approved quality, all complete as per approved drawing& direction of Engineer-in-Charge inclusive of cost of Single / double glass panes, wire mesh and silicon sealent . Note: For uPVC frame and sash extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be accepted. But no extra payment on this account shall be made.

Two track two panels sliding window of reputed/standard makes (other than Fenesta make) made of (small series) frame 52 x 44 mm &sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead with 5 mm heat strengthened clear glass of appropriate dimension. (Area of window up to 1.75 sqm).

Supplying and fixing in position M.S. Ornamental grills for windows and ventilators or for verandah openings using M.S. Flats, square rods, angles sheets etc., of approved design including necessary cuttings, bending, fabrication, welding grinding and finishing smooth including painting the grills with two coats over a primary coat(total three coats) with synthetic enamel paint of approved make and colour including cost of making holes in RCC or masonry works and making goos the same where ever necessary, including cost and conveyance of all materials, incidental charges etc., complete.

Supplying, fabrication and placing in position of M S truss work by usin MS tubes & Pipes of requried dia as per ISI-1161 including cost of labour charges for fabricating are heavy steel works like trusses, stanchions, heavy beams & girders including cost of welding rods, power charges & labour charges for fixing in position & including painting the pipes with two coats of synthetic enamel paint over a primary coat of Red oxide metal primer) (total three coats ) of approved make and colour including cost and conveyance of are materials, incidental charges etc., complete.

Supply and fixing of Galvalume sheet Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.47mm thickness, Coating: Zinc coating Z120 GSM. Tensile strength: 300 MPA. Paint coating: Regular Modified Polyester painting. Painting thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length: Maximum 12 Meters with Regular Range Colours with minimum end lap of 15 cms etc.,complete as directed during execution.Note:- Galvalume sheet of 300 Mpa is to be used for crimping.

Supply of Roof Accessories medium size: Ridge, Barge Cap, Corner Trim, L- Flashing, Down Pipes, Gutter etc., with 0.47mm thick, Width: 0.585, Length: Maximum 2½ Meters

Supplying & fixing stainless steel sink size 36" x 18" (914.4x457.2mm) 1 mm thick with accessories

Providing & Placing on Terrace (at all floor levels) polyethylene water storage tank of Double layer Rotomoulded confirming to IS:12701 approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks etc., complete as directed during execution etc., complete as directed during execution.

Providing Unplasticized PVC rain water down fall pipes of 110 mm dia with ISI 13592 Type A, mark with necessary shoes bends, collars etc including making holes in wall, RCC slabs, beams, Columns, including fixing with necessray wooden plugs of size not less than 50X50X75mm (where it is required pipe clear of wall wooden blocks of size equal to that of ears of the pipe shall be used ) screws, iron clamps of 18g and making good the same includingcost and conveyance of all materials and incidental charges etc, as directed during execution.