REPAIR TO MISC ROAD FURNITURE ITEMS AT TRANSIT CAMP PALCHAN

Amount

Supply and fixing in repair cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions, Complete all as specified and directed by Engineer-in-charge.

Supply and fix in repair solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. Complete all as specified and directed by Engineer-in-charge.

Supply and fixing in repair metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 Complete all as specified and directed by Engineer-in-charge.

Supply and fixing in repair for 80 cm size convex mirror with 100 cm, 2.5" thick and 6.75 long pole fixed in a 30x30x45 cm size pit with 50x50x6 mm thick size tee section, including earth work and cement concrete 1:2:4 Type B (using 20 mm graded stone aggregate) and with all necessary fitting and fixtures to fix the convex mirror, Complete all as specified and directed by Engineer-in-charge.

Manufacturing, supplying and fixing Retro reflective regulatory sign board of size 900 mm dia meter made out of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated lens type retro -reflective heeting as approved by Engineer-in-charge . Letter, symbols, borders etc. will be as per IRC - 67 with required colour scheme on the boards and with the high intensity grade A. The aluminium sheet to be riveted to M.S. frame of angle iron of size 40x40x4 mm. The boards will be fixed to 1 No. 50x50 mm square post made of M.S. angle 50x50x4 mm, 4 m long welded to the frame with adequate anti-theft arrangement .Sheet work to be painted with two or more coats of synthetic enamel paint over an under coat (primer) and back side of aluminium sheet to be painted with two or more coats of epoxy paint including appropriate priming coat complete in all respects as per direction of Engineer-in-charge.

M & L for painting lines, dashes arrow, letters etc on roads pavements and the like n. exc 10 cm wide with road marking paint, white or golden yellow. complete all as specified and directed by Engineer-in-Charge

Demolition of PCC in ground floors and pavings n exc 15cm thickness including below or above ground level complete all as specified and directed by Engineer-in-Charge.

M&L for PCC (1:4:8) type D2 40mm graded stone aggregate in foundations, fillings and Mass concrete complete all as specified and directed by Engineer-in-Charge

kewal builders