Construction of Video Conference Room, Canteen, Laundry & Cloth store, Salamati Control Point, Telephone Booth, 4 Nos. Gate For Yards Inside Jail & Extra Gate for Entry at District Jail Amreli, Dist. Amreli (Including Electrification)

Name of Work :- Construction of Video Conference Room, Canteen, Laundry &

Cloth store, Salamati Control Point, Telephone Booth, 4 Nos.

Gate For Yards Inside Jail & Extra Gate for Entry at District Jail

Amreli, Dist. Amreli (Including Electrification)

:: SCHEDULE B ::

Statement showing the approximate quantities for the items of the above work to be carried out and

approximate cost put to tender for Rs.

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

1 Excavation for foundation upto 1.50mt. depth including 186.00 Cum. 121.72 Rupees One Hundred

sorting out and stacking of useful materials and disposing of Twenty One And

the excavated stuff upto any lead & Lift. [A] Loose or Soft Paise Seventy Two

2 Excavation for foundation upto 1.50mt. depth including 82.00 Cum. 155.60 Rupees One Hundred

sorting out and stacking of useful materials and disposing of Fifty Five And Paise

the excavated stuff upto any lead & Lift. [B] Dense or Hard Sixty Only

3 Excavation for foundation From 1.5 Mt to 3.00. Mt depth 89.00 Cum. 297.05 Rupees Two Hundred

including sorting out and stacking of useful materials and Ninety Seven And

disposing of the excavated stuff upto any lead & Lift. [D] Paise Five Only

4 Providing and laying TMT Steel reinforcement (Grade Fe- 16750.00 Kg 76.52 Rupees Seventy Six

500) for RCC work including cutting, bending, binding and And Paise Fifty Two

placing in position etc.comp for all floor Only

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

5 Providing & laying controlled cement concrete M- 250 and 24.00 Cum 4722.70 Rupees Four

finishing smooth with curing etc.complete including the cost Thousand Seven

of formwork of plywood only with fair finish & Proping must Hundred Twenty Two

be of steel only so as to give a fair finish but excluding the And Paise Seventy

cost of reinforcement for R.C.C. work in Foundation Only

Footing for any cross sectional area at Rate are also

Inclusive Of Providing & Mixing Plastisizer Of Approved

Make & In Proportion As per mix design.

6 Providing & laying controlled cement concrete M- 250 and 17.00 Cum 9363.24 Rupees Nine

finishing smooth with curing etc.complete including the cost Thousand Three

of formwork of plywood only with fair finish & Proping must Hundred Sixty Three

be of steel only so as to give a fair finish but excluding the And Paise Twenty

cost of reinforcement for R.C.C. work in COLUMNS UP TO Four Only

PLINTH for any cross sectional area at Rate are also

Inclusive Of Providing & Mixing Plastisizer Of Approved

Make & In Proportion As per mix design.

7 Providing and laying cement concrete 1:4:8 ( 1 cement ; 4 38.00 Cum 2742.27 Rupees Two

coarse sand; 8 graded machine crushed stone Thousand Seven

aggregate 40mm nominal size) and curing complete Hundred Forty Two

including cost of form work in FOUNDATION AND PLINTH. And Paise Twenty

8 Providing and laying ordinary cement concrete 1:2:4 (1 161.00 Sqm 335.72 Rupees Three

cement; 2 coarse sand; 4 graded stone aggregate 20mm Hundred Thirty Five

nominal size ) laid in one layer finished with a floating coat And Paise Seventy

of neat cement (B) 50mm thick for ALL FLOORS. Two Only

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

9 Providing & laying controlled cement concrete M- 250 and 30.00 Cum 7318.48 Rupees Seven

finishing smooth with curing etc.complete including the cost Thousand Three

of formwork of plywood only with fair finish & Proping must Hundred Eighteen

be of steel only so as to give a fair finish but excluding the And Paise Forty Eight

cost of reinforcement for R.C.C. work in Plinth Beam for Only

any cross sectional area at Rate are also Inclusive Of

Providing & Mixing Plastisizer Of Approved Make & In

Proportion As per mix design.

10 Brick work using common burnt clay building bricks having 115.00 Cum 4172.60 Rupees Four

crushing strength not less than 35 Kg/Sq.cm.in foundation Thousand One

and plinth in cement mortar 1:6 (1-cement;6-coarse sand), Hundred Seventy Two

Conventional bricks. Bricks with frog only shall be used. And Paise Sixty Only

11 Filling in foundation and plinth with murrum or selected 244.00 Cum 298.79 Rupees Two Hundred

soil in layers of 20 cm. Thickness including watering, Ninety Eight And

ramming and consolidating etc. complete. Paise Seventy Nine

12 Filling available excavated earth (excluding rock ) in 95.00 Cum 135.56 Rupees One Hundred

trenches, plinth sides of foundation etc. in layers not Thirty Five And Paise

exceeding 20 cms. in depth consolidation each deposited Fifty Six Only

layer by ramming and watering.

13 Supplying and Filling in plinth with sand under floors 43.00 Cum. 477.03 Rupees Four Hundred

including watering, ramming, consolidation and dressing Seventy Seven And

etc.complete. Paise Three Only

14 Applying general insecticide pest control treatment to 230.00 Sqm 38.70 Rupees Thirty Eight

floors, cup boards etc., including labour, material etc. And Paise Seventy

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

15 Providing and laying cement concrete 1:5:10 ( 1 cement ; 5 55.00 Cum. 2581.11 Rupees Two

coarse sand; 10 hand broken stone aggregate 40mm Thousand Five

nominal size) and curing complete including cost of form Hundred Eighty One

work in foundation and plinth. And Paise Eleven

16 Providing & laying controlled cement concrete M- 150 and 26.25 Cum 4045.58 Rupees Four

finishing smooth with curing etc.complete including the cost Thousand Forty Five

of formwork of plywood only with fair finish & Proping must And Paise Fifty Eight

be of steel only so as to give a fair finish but excluding the Only

cost of reinforcement for R.C.C. work in Grade slab for any

cross sectional area at Rate are also Inclusive Of Providing

& Mixing Plastisizer Of Approved Make & In Proportion As

per mix design.

17 Providing & laying controlled cement concrete M- 200 and 14.00 Cum 6110.86 Rupees Six Thousand

finishing smooth with curing etc.complete including the cost One Hundred Ten

of formwork of plywood only with fair finish & Proping must And Paise Eighty Six

be of steel only so as to give a fair finish but excluding the Only

cost of reinforcement for R.C.C. work in Coping for any

cross sectional area at Rate are also Inclusive Of Providing

& Mixing Plastisizer Of Approved Make & In Proportion As

per mix design.

18 Providing & laying controlled cement concrete M- 200 and 25.00 Cum. 10783.57 Rupees Ten

finishing smooth with curing etc.complete including the cost Thousand Seven

of formwork of plywood only with fair finish & Proping must Hundred Eighty Three

be of steel only so as to give a fair finish but excluding the And Paise Fifty Seven

cost of reinforcement for R.C.C. work in Column for any Only

cross sectional area at Ground Floor Rate are also

Inclusive Of Providing & Mixing Plastisizer Of Approved

Make & In Proportion As per mix design.

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

19 Providing & laying controlled cement concrete M- 200 and 24.00 Cum. 9079.22 Rupees Nine

finishing smooth with curing etc.complete including the cost Thousand Seventy

of formwork of plywood only with fair finish & Proping must Nine And Paise

be of steel only so as to give a fair finish but excluding the Twenty Two Only

cost of reinforcement for R.C.C. work in Beam. for any

cross sectional area at Ground Floor Rate are also

Inclusive Of Providing & Mixing Plastisizer Of Approved

Make & In Proportion As per mix design.

20 Providing & laying controlled cement concrete M- 200 and 43.00 Cum. 8054.30 Rupees Eight

finishing smooth with curing etc.complete including the cost Thousand Fifty Four

of formwork but excluding the cost of reinforcement for And Paise Thirty Only

R.C.C. work in SLAB having thickness of 10 cm. and

upto 13 cms. for any cross sectional area at Ground Floor

Rate are also Inclusive Of Providing & Mixing Plastisizer Of

Approved Make & In Proportion As per mix design.

21 Providing and laying autoclaved aerated sand based 127.70 Cum 5990.42 Rupees Five

cement concrete (AAC) masonry blocks confirming to Thousand Nine

IS 2185(part-3) having compressive strength not less than Hundred Ninety And

4.0 N/mm2 (heavy strength) and joited with blockjointing Paise Forty Two Only

adhesive mortar having tensile strength of not less than

0.8n/mm2 and ensuring long lasting thermal insulation

according to european norms (EN 13501-2) suitable for high

performance of external & internal concrete masonry walls,

joint having thickness in thin layer of 3mm to 4mm between

masonry units. masonry blocks need not to pre-wet the

blocks or post cure the wall with water. for Ground Floor.

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

22 Providing & laying controlled cement concrete M- 200 and 9.00 Cum 8789.99 Rupees Eight

finishing smooth with curing etc.complete including the cost Thousand Seven

of formwork of plywood only with fair finish & Proping must Hundred Eighty Nine

be of steel only so as to give a fair finish but excluding the And Paise Ninety

cost of reinforcement for R.C.C. work in LINTEL for any Nine Only

cross sectional area at GROUND FLOOR.Rate are also

Inclusive Of Providing & Mixing Plastisizer Of Approved

Make & In Proportion As per mix design.

23 Providing & laying controlled cement concrete M- 200 and 15.00 Cum 6110.86 Rupees Six Thousand

finishing smooth with curing etc.complete including the cost One Hundred Ten

of formwork of plywood only with fair finish & Proping must And Paise Eighty Six

be of steel only so as to give a fair finish but excluding the Only

cost of reinforcement for R.C.C. work in LINTEL Bend for

any cross sectional area at GROUND FLOOR.Rate are also

Inclusive Of Providing & Mixing Plastisizer Of Approved

Make & In Proportion As per mix design.

24 Providing & laying controlled cement concrete M- 200 and 7.00 Cum 9715.75 Rupees Nine

finishing smooth with curing etc.complete including the cost Thousand Seven

of formwork of plywood only with fair finish & Proping must Hundred Fifteen And

be of steel only so as to give a fair finish but excluding the Paise Seventy Five

cost of reinforcement for R.C.C. work in finishing smooth for Only

R.C.C. CHHAJJAS having any thickness up to floor two

level including finishing the exposed surface with cement

mortar 1:3 ( 1 cement : 3 fine sand) to give a smooth

surface for ALL FLOOR. Rate are also Inclusive Of

Providing & Mixing Plastisizer Of Approved Make & In

Proportion As per mix design.For ALL FLOOR.

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

25 Providing, Supplying and Fixing of 32mm (Total) Thick 11.00 Sqm 11088.83 Rupees Eleven

Double Flush Door Shutter with 1mm Thick Laminates on Thousand Eighty

Both Side of Shutter. Making / Construction of Flush Door is Eight And Paise

with Pine or southern Yellow Pine Filler and 2.5mm core Eighty Three Only

veneer Both Side and 0.4mm Face Veneer on Both Side

with Lock rail on Center. Flush Door Provide with Teak

wood beading patti (32mm X 12mm) on Peripheries of Flush

Door with Door Frame of Non Teak Solid Wood of size

150mm x 70mm with Chemically Treated and Seasoned

Including Paint Matching with Laminates. Frame & Flush

door shutter having 5 year warranty against attack of

biological agent like termite, borers, decay, fungi and

harmful insects also warranty against seasoning related

issues like crack, bending, twisting, warping. Laminates on

shutter shall be press by cold press method. Shutter shall

be brought to site in packed PVC bags & pvc coating shall

be removed on completion of work in such a way that

shutter & Frame is free from nail mark & any damages etc.

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

Rates are also Inclusive of all Labors & Proviging 15cm.

Long 8 No of Hold Fast (25mm X 5mm) & 8 No of 6 Inch

S.S. but Hinges, 100mm x 75 mm x 3mm thick, required

Screw & Nails per Frame and Fixing following S.S. Fixtures

(1) Aldrops 2 No, 250mm x 16mm, (2) Door Stopper 2 No,

100mm Long, (3) Double Leg Heavy Push Door Stopper

No & (4) Handle 4 No, 150mm Long X 10mm thick. Door

are Fixing as per Details Drawing & Instruction of Engineer

in charge. All Materials Used Shall be as Per approved

Material Make List of G.S.P.H.C. The Required Frame is to

be Obtained from Vanil Udhyog Maked Only.

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

26 Providing, Supplying and Fixing of 32mm (Total) Thick 16.00 Sqm 8984.16 Rupees Eight

Single Flush Door Shutter with 1mm Thick Laminates on Thousand Nine

Both Side of Shutter. Making / Construction of Flush Door is Hundred Eighty Four

with Pine or southern Yellow Pine Filler and 2.5mm core And Paise Sixteen

veneer Both Side and 0.4mm Face Veneer on Both Side Only

with Lock rail on Center. Flush Door Provide with Teak

wood beading patti (32mm X 12mm) on Peripheries of Flush

Door with Door Frame of Non Teak Solid Wood of size

120mm x 65 mm with Chemically Treated and Seasoned

Including Paint Matching with Laminates. Frame & Flush

door shutter having 5 year warranty against attack of

biological agent like termite, borers, decay, fungi and

harmful insects also warranty against seasoning related

issues like crack, bending, twisting, warping. Laminates on

shutter shall be press by cold press method. Shutter shall

be brought to site in packed PVC bags & pvc coating shall

be removed on completion of work in such a way that

shutter & Frame is free from nail mark & any damages etc

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

Rates are also Inclusive of all Labors & Proviging 15cm.

Long 6 No of Hold Fast (25mm X 5mm) & 3 No of 6 Inch

S.S. but Hinges, 100mm x 75 mm x 3mm thick, required

Screw & Nails per Frame and Fixing following S.S. Fixtures

(1) Aldrops 1 No, 250mm x 16mm & Tadi 1 No, (2) Door

Stopper 1 No, 100mm Long, (3) Double Leg Heavy Push

Door Stopper 1 No & (4) Handle 2 No, 150mm Long X

10mm thick. Door are Fixing as per Details Drawing &

Instruction of Engineer in charge. All Materials Used Shall

be as Per approved Material Make List of G.S.P.H.C. The

Required Frame is to be Obtained from Vanil Udhyog

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

27 Providing, Supplying and Fixing of 32mm (Total) Thick 2.00 Sqm 8407.55 Rupees Eight

Double Flush Door Shutter with 1mm Thick Laminates on Thousand Four

Both Side of Shutter. Making / Construction of Flush Door is Hundred Seven And

with Pine or southern Yellow Pine Filler and 2.5mm core Paise Fifty Five Only

veneer Both Side and 0.4mm Face Veneer on Both Side

with Lock rail on Center. Flush Door Provide with Teak

wood beading patti (32mm X 12mm) on Peripheries of Flush

Door with Door Frame of Non Teak Solid Wood of size

100mm x 60mm with Chemically Treated and Seasoned

Including Paint Matching with Laminates. Frame & Flush

door shutter having 5 year warranty against attack of

biological agent like termite, borers, decay, fungi and

harmful insects also warranty against seasoning related

issues like crack, bending, twisting, warping. Laminates on

shutter shall be press by cold press method. Shutter shall

be brought to site in packed PVC bags & pvc coating shall

be removed on completion of work in such a way that

shutter & Frame is free from nail mark & any damages etc.

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

Rates are also Inclusive of all Labors & Proviging 15cm.

Long 8 No of Hold Fast (25mm X 5mm) & 8 No of 6 Inch

S.S. but Hinges, 100mm x 75 mm x 3mm thick, required

Screw & Nails per Frame and Fixing following S.S. Fixtures

(1) Aldrops 2 No, 250mm x 16mm, (2) Door Stopper 2 No,

100mm Long, (3) Double Leg Heavy Push Door Stopper

No & (4) Handle 4 No, 150mm Long X 10mm thick. Door

are Fixing as per Details Drawing & Instruction of Engineer

in charge. All Materials Used Shall be as Per approved

Material Make List of G.S.P.H.C. The Required Frame is to

be Obtained from Vanil Udhyog Maked Only.

28 Providing and fixing Alluminium Section Window having 14.00 Sqm 1902.50 Rupees One

extruded Aluminum Colour anodized section frame Thousand Nine

main outer size 95mm x 24mm x 1.17mm (of Jindal Hundred Two And

Section no:2459 @ wt.of 0.738 Kg/mt), horizontal Three Paise Fifty Only

track member size 92mm x 31.75mm x 1.30mm (of Jindal

Section no:8688,@ Wt.1.07 Kg/mt), vertical member of size

92mm x 31.75mm x 1.50mm (of Jindal Section no:8933,@

Wt. 1.06 Kg/mt) with sliding shutters of horizontal member

size 40mm x 18mm x 1.29mm (of Jindal Section no:8947@

wt.of 0.456 Kg/mt), vertical member of size 40mm x 18mm x

1.29 mm (of Jindal Section no:8949 @ wt.of 0.456Kg/mt)

with 5 mm thick transparent bronze colour tinted float glass

with powder coated aluminum fittings and fixtures and

transparent silicon sealant glass fixing to frame as per

details including One Mosquitoe Jalli Shutter shall be

use of GI With Both Side Locking Arrangment.

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

29 Providing and fixing window having extruded aluminum 18.00 Sqm 1696.73 Rupees One

Colour anodized section frame main outer size 63.50 x Thousand Six

38.10 x 1.95 mm,@ Wt 1.094 Kg / Rmt, horizontal two Hundred Ninety Six

track member size 61.85 mm x 31.75 mm x 1.20mm @ And Paise Seventy

wt.of 0.695 Kg/mt, vertical member of size 61.85 mm x Three Only

31.75mm x 1.30 mm @ wt.of 0.659 Kg/mt with sliding

shutters of horizontal member size 40mm x 18mm x

1.29mm @ wt.of 0.456Kg/mt, vertical member of size 40mm

with 5 mm thick transparent bronze colour tinted float glass

with powder coated aluminum fittings and fixtures and

transparent silicon sealant glass fixing to frame as per

details etc complete for window.

30 Providing and fixing standared extruded of alluminium 3.00 Sqm 1163.92 Rupees One

section of size 63mm x 38.10mm x 1.2mm (Jindal Section Thousand One

:2434, @ Wt. 0.643 Kg/mt) with colour anodized alluminium Hundred Sixty Three

frame for ventilation with 5 mm thick frosted glass as details And Paise Ninety Two

etc complete for Ventilation Only

31 Providing and fixing standared extruded of alluminium 2.00 Sqm 1509.90 Rupees One

section of size 63.50x38.10x1.95mm @Wt1.094Kg/Rmt Thousand Five

with colour anodized alluminium frame with 5mm thick Hundred Nine And

transparent bronze colour tinted float glass with colour Paise Ninety Only

anodized alluminium frame for Openable Window with

5mm thick frosted glass as detail set complete for.window

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

32 Providing and Fixing Extruded Alluminium Section 15 9.00 Sqm 4174.70 Rupees Four

Microns Regular Anodized (coating with matt finished Thousand One

and excellent outdoor durability) Door with partly glazed Hundred Seventy

of 5mm clear float glass & partly both sides pre laminated Four And Paise

partly board of 12mm thick as per detailed drawing and Seventy Only

specification gaskets of EPDM quality shall be provided for

weather tightening along with silicon sealent of dow

corning/G.E. silicon/wacker germany of equivalent complete

etc. as approved by architect complete as per the following

sections of Jindal make or equivalent.

33 Providing and fixing Solid PVC Flush Door Shutter 24 mm 12.00 Sqm 4514.20 Rupees Four

thick,Made from C0-extruded THREE LAYER RIGID PVC Thousand Five

foam sheet(singal Extruded) with density not less than 600 Hundred Fourteen

kg/cbm outer layer 1 mm thick should be of rigid PVC with And Paise Twenty

density of not less than 1400 kg/cbm.Door should be water Only

proof,Termite proof fire retardant & having good screw

holding capacity.providing and fixing 100% Solid Wood

Plastic Composite (WPC) Door Frame 90mmX45mm Made

from wood plastic composite (Single Extruded Process)

material with density 780 kg/cbm.all as per specification

drawing as directed by the engineer in charge.

34 Providing & fixing Concealed Center Point to wall celing & 20.00 Rmt 206.73 Rupees Two Hundred

floor CPVC (SDR-13.5) PIPE having National Sanitation Six And Paise

Foundation (NSF) seal For Portable Water of 20 mm. dia. Seventy Three Only

nominal bor tube fitting and clamps including making good

the wall, ceiling and floor etc. Complete

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

35 Providing & fixing Concealed Center Point to wall celing & 110.00 Rmt 251.31 Rupees Two Hundred

floor CPVC (SDR-13.5) PIPE having National Sanitation Fifty One And Paise

Foundation (NSF) seal For Portable Water of 25 mm. dia. Thirty One Only

nominal bor tube fitting and clamps including making good

the wall, ceiling and floor etc. Complete

36 Providing and fixing concealed or open center point to wall 125.00 Rmt 443.29 Rupees Four Hundred

ceiling & floor CPVC (SDR 13.5) PIPE having National Forty Three And

Sanitation Foundation (NSF) seal for potable water of Paise Twenty Nine

following dia. nominal bore tube fittings with 6mm Dia U Only

Clamp with washer for Vertical water supply pipe. Pipe shall

be concealed or open as mention in tender description. Pipe

shall be as per approved make of GSPHCL make list [E]

37 Providing and fixing concealed or open center point to wall 190.00 Rmt 654.04 Rupees Six Hundred

ceiling & floor CPVC (SDR 13.5) PIPE having National Fifty Four And Paise

Sanitation Foundation (NSF) seal for potable water of Four Only

following dia. nominal bore tube fittings with 6mm Dia U

Clamp with washer for Vertical water supply pipe. Pipe shall

be concealed or open as mention in tender description. Pipe

shall be as per approved make of GSPHCL make list [E]

38 Providing and fixing concealed or open center point to wall 35.00 Rmt 1312.94 Rupees One

ceiling & floor CPVC (SDR 13.5) PIPE having National Thousand Three

Sanitation Foundation (NSF) seal for potable water of Hundred Twelve And

following dia. nominal bore tube fittings with 6mm Dia U Paise Ninety Four

Clamp with washer for Vertical water supply pipe. Pipe shall Only

be concealed or open as mention in tender description. Pipe

shall be as per approved make of GSPHCL make list [D]

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

39 Provinding and fixing chicken wire mesh Jali 0.18 mm and 129.00 Sqm 64.06 Rupees Sixty Four

0.18mt wide with necessary screws and nails to joint And Paise Six Only

between R.C.C. column and brick work etc. complete as per

Engineer-in-charge.

40 Providing 10 mm thick cement PLASTER in single coat on 274.00 Sqm 220.13 Rupees Two Hundred

ceilings for interior plastering and finished even & smooth in Twenty And Paise

C.M. 1: 3 ( 1 cement : 3 sand ) including finishing with a Thirteen Only

floating coat of neat cement slurry at GROUND FLOOR.

41 Provinding 15 mm thick cement PLASTER in single coat 1111.00 Sqm 220.46 Rupees Two Hundred

on brick or concrete wall for interior plastering and finished Twenty And Paise

even and smooth in C.M. 1:4 ( 1 cement : 4 sand ) Forty Six Only

including finishing with floating coat of neat cement slurry at

42 Providing 20mm thick SAND FACED cement plaster on 180.00 Sqm 339.02 Rupees Three

walls above ground level consisting 12mm thick backing Hundred Thirty Nine

coat of C:M 1:3 (1 cement; 3 sand) and 8mm thick finishing And Paise Two Only

coat of C:M 1:1 (1 cement; 1 sand) etc. complete for any

43 Synthetic Texture Plaster with Double Coat Smooth 686.00 Sqm 495.54 Rupees Four Hundred

plaster : Providing 20mm thick cement plaster in single Ninety Five And Paise

coat plastering upto floor two level Outside and finished Fifty Four Only

even and smooth in (i) Cement mortar 1:3 (1-cement : 3-

sand) as Base Coat and providing 2-3 mm thick synthetic

texture plaster of approved texture (Material Shall be Used

as Approved By GSPHCL Only ) including cost of all

materials, labour, conveyance, loading and unloading,

taxes, royalties, scaffolding, watering etc.complete for any

Height as per Drawing and instructions of Engineer -in -

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

44 Providing CEMENT VATA ( 10 cm. x 10 cm. ) size quarter 105.00 Rmt 24.04 Rupees Twenty Four

round in cement mortar 1:1 including neat cement finishing, And Paise Four Only

watering etc.complete

45 Providing and fixing PVC SWR Nahni trap IS 14735 for 10.00 No. 568.89 Rupees Five Hundred

drain-75 mm diameter with jali of the following nominal Sixty Eight And Paise

diameter of self cleansing design with C.I scread down or Eighty Nine Only

hinged grating including the cost of cutting and making good

46 Providing and fixing PVC SWR Nahni trap IS 14735 for 10.00 No. 580.47 Rupees Five Hundred

drain-100 mm diameter with jali of the following nominal Eighty And Paise

diameter of self cleansing design with C.I scread down or Forty Seven Only

hinged grating including the cost of cutting and making good

47 Providing and fixing SS Jali Floor Drain Jali For Nanhi 4.00 No. 613.97 Rupees Six Hundred

Trap for drain-100 mm diameter with jali of the following Thirteen And Paise

nominal diameter of self cleansing design. Ninety Seven Only

48 P & F to Wall Ceilling and Floor SWR Rain Water pipe as 77.00 Rmt. 323.15 Rupees Three

Per IS-13592 of 90mm Dia Complete with Special flings, Hundred Twenty

Compressor type Fittings, Wall clips on wooden patty Three And Paise

including making good the ceiling and floor on terrace rain Fifteen Only

water pipe shall be 90 mm Dia. SWR horizontal pipe and

vertical pipe and 90mm bend at the end near by Ground

level rate are Inclusive of all Necessary Fittings required.

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

49 Providing & Laying integrated cement based proprietary 292.00 Sqm 890.39 Rupees Eight

water proofing treatment of required thickness over the roof Hundred Ninety And

including 10mm thick water proofing cement plaster in Paise Thirty Nine

cement mortar 1:3 and CHINA MOSAIC fitting and finally Only

finishing the surface with white cement slurry and slopping

out terrace slab with following specification laid to required

slope not flatter than 1:80 (the thickness of water proofing

treatment near rain water outlet or the lowest point of the

finished slope shall not be less than 45mm including

treating the vertical surface of the parapet wall upto 20cms.

height above finished level of terracing including finishing

top with joint less water proofing plaster, curing, testing etc.

completed. Rate is including 10 years performance of

guarantee bond to be given on stamp paper (No extra shall

be paid for increase in thickness for proper slope)

Applying and grouting a slurry coat of neat cement using

2.75 kg/Sqm of cement admixed with proprietary water

proofing compound conforming to IS-2645 over the RCC

slab including cleaning the surface before treatments.

Laying cement concrete using broken bricks bats 25mm to

40mm size with 50% of cement mortar 1:4 (1cement :

coarse sand) over 10mm thick water proofing cement

plaster in cement mortar of mix 1:3 (1cement : 3 coarse

sand) admixed with proprietary water proofing compound

confirming to IS-2645 to required slope and treating similarly

the adjoining walls upto 200mm height including rounding of

junction of walls.

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

After two days of proper curing applying a second coat of

Finishing the surface with china mosaic pieces laid in 10mm

thick joint less cement mortar of mix 1:3 (1cement :

coarse sand) admixed with proprietary water proofing

compound confirming to IS-2645 and finally finishing the

surface with trowel with neat cement slurry.

The whole terrace so finished shall be flooded with water for

a minimum period of two weeks for curing for final test. All

above operation to be done in order and as directed and

specified by the engineer in charge.

50 Providing, Fabricating and fixing M.S. GRILL/GATE of 2329.00 Kg 75.11 Rupees Seventy Five

approved pattern fabricated from M.S. flat,square bars, And Paise Eleven

round bars,c-channel, box pipe as per detail Drawings. Rate Only

is inclusive of welding with grinding smooth surface, two

coats of Oil paint and one coat of yellow Zinc primer coat of

approved brand only. Oil paint shall be Luxol Enamel paint

of Berger Paint india limited. or asian paint apcolite

premium gloss Enamel of asian paint or Dulux premium

gloss enamel of dulux paint and nerolac synthetics enamel

of nerolac paint for all floor and at any height only.

Structural Steel material should be used ISI marked

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

51 Steel work, welded in built up sections framed work 201.00 Qtl 9018.30 Rupees Nine

including cutting, hoisting, fixing in position and Structral Thousand Eighteen

Steel painted by applying Two Coats of Zinc Phosphate And Paise Thirty Only

Primer and 2 coats of Synthetic enamel paint Conf. to IS

2933.(D) In trussses and trussed purlins, upto 25 M. span

and 15 M. ovarall height. Structural Steel material should

be used ISI marked only.

52 Providing and fixing to wall ceiling and floor U.PVC/S.W.R. 23.00 Rmt. 264.97 Rupees Two Hundred

soil waste pipe with "O" ring of ISI13592/92, Rate Sixty Four And Paise

inclusive of all fittings like single or double "Y" with door, Ninety Seven Only

reducer, coupler single T with door bend, pipe clip on

wooden patti etc.complete and making good the wall ceiling

and floor. (A) 75mm dia

53 Providing and fixing to wall ceiling and floor U.PVC/S.W.R. 29.00 Rmt. 495.91 Rupees Four Hundred

soil waste pipe with "O" ring of ISI13592/92, Rate Ninety Five And Paise

inclusive of all fittings like single or double "Y" with door, Ninety One Only

reducer, coupler single T with door bend, pipe clip on

wooden patti etc.complete and making good the wall ceiling

and floor. (B) 110mm dia

54 Provinding and fixing in position PVC COWEL VENT to 5.00 No. 16.47 Rupees Sixteen And

pipe 75 mm dia.directed Paise Forty Seven

55 Provinding and fixing in position PVC COWEL VENT to 5.00 No. 28.16 Rupees Twenty Eight

pipe 110 mm dia.directed And Paise Sixteen

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

56 Providing and Fixing Granite Telephonic Black Colour 15 46.60 Sqm 2428.00 Rupees Two

to 18 mm thick for jambs and sills of doors & windows Thousand Four

using neat cement slurry laid over 20 mm average base of Hundred Twenty Eight

cement mortar 1:1(1 cement:1 Coarse Sand) and jointed Only

with grey cement slurry including racking(Tancha Work)

rubbing and polishing,scaffoldings,tools and

tackles,scaffolding etc. complete(with base of neat cement)

as per direction of Engineer in charge including rounding the

exposed edges as directed.

57 Providing and laying 24" x 24" Double Charged Virtified 126.00 Sqm 1513.90 Rupees One

Tiles 8 to 10mm thick in Flooring over 20mm (Average) Thousand Five

base of cement mortar 1 : 6 (1 Cement : 6 Coarse Sand) Hundred Thirteen And

on new surface or fixing on existing flooring by adhesive Paise Ninety Only

material including dismentaling of existing flooring and

jointed with colour cement slurry including finished with flush

pointing & cleaning the surface etc. complete in light shade

for ALL FLOORS material shall be used as per approved

make as per GSPHCL. size and shade as per approved

drawings or as per diection of engineer in charge.

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

58 Providing and laying 24" x 24" Double Charged Virtified 11.00 Sqm 1445.20 Rupees One

Tiles 8 to 10mm thick tiles in Skirtings over 10mm Thousand Four

(Average) base of cement mortar 1 : 3 (1 Cement : 3 Hundred Forty Five

Coarse Sand) on new surface or fixing on existing flooring And Paise Twenty

by adhesive material including dismentaling of existing Only

flooring and jointed with colour cement slurry including

finished with flush pointing & cleaning the surface etc.

complete in light shade for ALL FLOORS. material shall be

used as per approved make as per GSPHCL. size and

shade as per approved drawings or as per diection of

engineer in charge.

59 Providing & Laying 24" x 24" Double Charge vitrified 8 to 10.00 Sqm 1453.19 Rupees One

10 mm thick tile flooring over 20 mm (average) base of Thousand Four

cement mortar 1:6 ( 1 cement: 6 coarse sand) on new Hundred Fifty Three

surface or fixing on existing flooring by adhesive including And Paise Nineteen

dismentaling of existing flooring and material jointed with Only

color cement slurry including finised with flush pointing &

cleaning the surface etc. complete for Anti Skid. material

shall be used as per approved make as per GSPHCL. size

and shade as per approved drawings or as per diection of

engineer in charge.

60 Providing and laying 300mm x 600mm Ceramic tiles 8mm 54.00 Sqm 1013.75 Rupees One

thick in riser of steps and dado on a bed of 10mm thick Thousand Thirteen

cement mortar 1:3 (1-cement : 3-coarse sand ) finishing with And Paise Seventy

white cement slurry. Five Only

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

61 Providing and laying 25mm thick mirror Polished 114.00 Sqm 1009.03 Rupees One

(Dimond Cut) Kota Stone Slab Flooring over 20mm thick Thousand Nine And

base of cement mortar 1:6 ( 1 cement : 6 coarse sand) laid Paise Three Only

over & jointed with grey cement slurry including rubbing &

polishing etc. Complete as Directed By Engineer In Charge

For All Floors.

62 Providing and fixing both side polished machine cut KOTA 200.00 Sqm 793.90 Rupees Seven

STONE shelve/ partition 20mm to 25mm thick embaded in Hundred Ninety Three

to wall at support including racking and finishing smooth the And Paise Ninety

surface including cutting the stone as and where required Only

etc. complete including rounding of exposed edges etc.

63 Providing and Laying 25mm Thick Mirror Polished 36.00 Sqm 1098.09 Rupees One

(Dimond Cut) Kota Stone in Riser of steps, skirting Thousand Ninety

Dedo and Pillars on 10mm thick cement mortar 1 : 3 (1- Eight And Paise Nine

Cement :3-Coarse Sand) and jointed with grey cement Only

slurry mixed with pigment to match shade of slab including

Rubbing and Polishing etc. Complete as Directed By

Engineer In Charge For All Floors.

64 Provinding and Laying 18 mm thick Granite stone slab in 9.00 Sqm 2247.24 Rupees Two

Skirting / Dado over 10mm thick average base of C.M. Thousand Two

1:3 (1:cement :3 coarse sand) laid and jointed with grey Hundred Forty Seven

cement slury including Rubbing and Polishing etc. Complete And Paise Twenty

for All Floors. Four Only

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

65 Providing and laying Granite Slab (18 mm thick) of 19.00 Sqm 2158.45 Rupees Two

approved colour & quality & brand, one side polished Thousand One

flooring over 20 mm (average) base of cement mortar 1:6 (1 Hundred Fifty Eight

cement : 6 coarse sand) laid and jointed with grey cement And Paise Forty Five

slurry including rubbing, curing including grooving, Only

moulding, nosing of corners and mirror polishing

complete.For flooring of steps, stairs with treads &

66 Moulding of Kota stone / Granite Stair Tread complete as 68.00 Rmt 129.95 Rupees One Hundred

per direction of Engineer In Charge. Twenty Nine And

Paise Ninety Five

67 Constructing of cooking platform ( sandwich type ) 68cm 6.00 Rmt 3796.91 Rupees Three

width and 80cm high resting on thick sandwiched polish Thousand Seven

Granite Slab in C.M 1:3 with providing and fixing 25 mm Hundred Ninety Six

thick rough kota stone at bottom and 20 to 25 mm thick And Paise Ninety One

Polish Granite stone ( single piece/ telephonic Black ) top & Only

Vertical and polished granite stone (single piece/ telephonic

Black ) 20 to 25mm thick on top & 18mm thick in Vertical

with 15mm high machine cut polished granite round

moulded Top facia patty including polishing etc . complete

as per drawing and specification without stainless steel sink

including necessary cutting for sink & making hole for gas

pipe and fixing P.V.C bend of 25mm dia

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

68 Providing and fixing stainless steel ( 304 Grade ) 1mm 2.00 No 4269.00 Rupees Four

thick Matt / Satin Finish Kitchen sink of over all Minimum Thousand Two

size 533mmx 457mm X 203mm deep having bowl Minimum Hundred Sixty Nine

size 470mm x 395mm x 203mm with cement mortar 1:3 Only

etc.complete.Rate including of 32mm dia.C.P.brass waste

coupling and 32mm dia.rigid PVC waste pipe upto N.T.

S.S.Kitchen Sink Shall be of Nirali, Navkar, Carysil, Krishna

69 Pro. And fixing single layer waterproof gypsum board 13.00 Sqm 600.94 Rupees Six Hundred

12.5mm thick sections using waterproof board of size And Paise Ninety

1220mmx1830mmx8.0mm suspended by GI suspender Four Only

channel of size 25mmx3mm with intermediate channelog

size 18mmx40mmx0.8mm at 1220mm center to center

ceiling section of size 40mmx35mmx0.55mmat 457mc/c

and perimeter channel A of size

20mmx27mmx30mmx0.5mm at edges & drops incl

.papertaps ands of itcleat, anchor fastener, scoch bolt

connecting cleat, joining compound top coaton ceiling

incl.making necy.opening for light fitting, diffuser etc. comp.

as per detail drawing as directed

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

70 Pro. & Fix. Single layer SG Gyproc fultone gypliner wall 101.00 Sqm 1840.00 Rupees One

lining with saint gobain gyproc fultone tiles nade from Thousand Eight

plasterboard having glass fiber in the core conforming to IS : Hundred Forty Only

2095 part 1, and of size 595 x 595 mm / 600 x 1200 mm,

having square perforation of 9.7 x 9.7 mm at 19.4 mm C/C

with center borders of 48 mm and the side borders of 30mm

,backed with non woven tissue on the back side, having

25mm resin bonded glass wool with black plastic bag in 2FT

x 2FT backing to the face side of gypliner frane with drywall

screws of 25mm at 300mm centers screwed to 45mm

gypliner channel section ( 0.40mm thick having two flanges

of 18mm each ) placed at 297.50mm C/C floor channel

fixed to floor and ceilling with nylon sleeves and steel

screws at 610mm centers.Fixing bracket ( 0.90mm thick,

29.5mm wide ,195mm long ) is fixed to the wall eith the help

of nylon sleeves and steel screws at 900mm centers to hold

the gypliner section in position and level. finally square and

tapered edges of the tiles are to be jointed and finished so

as have a flush look which includes filling and finished with

jinting compound , joint paper tape and two coats of drywall

top coat ( as per recommended practives of ( Saint - Gobain

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

71 Providing and fixing in position ISI marked PVC Rotational 12500.00 Liter 3.91 Rupees Three And

moulded Double coated syntex water Tank (IS : 1270) Paise Ninety One

Size including marking inlet and outlet. Over flow and Only

washout arrangement with G.I. connection including using

necessary M.H. for connection etc. complete with closed

cover including applying two coats of oil painting outside the

Tank etc. complete.

72 Provinding and fixing gun metal check or non return full way 3.00 No. 416.47 Rupees Four Hundred

WHEEL / HANDLE VALVE 25 mm dia. Sixteen And Paise

Forty Seven Only

73 Provinding and fixing gun metal check or non return full way 4.00 No. 656.86 Rupees Six Hundred

WHEEL / HANDLE VALVE 40 mm dia. Fifty Six And Paise

Eighty Six Only

74 Provinding and fixing gun metal check or non return full way 4.00 No. 2302.33 Rupees Two

WHEEL / HANDLE VALVE 50 mm dia. Thousand Three

Hundred Two And

Paise Thirty Three

75 Provinding and fixing gun metal check or non return full way 2.00 No. 4865.50 Rupees Four

WHEEL / HANDLE VALVE 65 mm dia. Thousand Eight

Hundred Sixty Five

And Paise Fifty Only

76 Providing and fixing S.W. gully trap with C.I. grating brick 13.00 No 1176.94 Rupees One

masonry chamber and watertight precast R.C.C. cover with Thousand One

frame of 300 mm. x 300 mm. size (Inside) with standard Hundred Seventy Six

weight: (A) square mouth trap 100 mm. x 100 mm. size P And Paise Ninety

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

77 Constructing Brick work using common burnt clay Building 8.00 No 4256.18 Rupees Four

Brick masonary block in course for under ground inspection Thousand Two

chamber and bends with stone of approved quality in Hundred Fifty Six And

cement mortar 1:5 R.C.C top slab with 1:2:4 mix (1cement; Paise Eighteen Only

2 coarse sand; 4 graded stone aggregates of 20 mm

nominal size) with 8mm dia. Steel at 15cm c/c and providing

and fixing 45 x 45 x 5mm angle frame so as to provide of

size 450mm x 600mm & fixing precast R.C.C cover of size

60cm x 45cm x7cm foundation concrete 1:5:10 inside

plaster 15 mm thick with cement mortar 1:3 finished

smooth with floating coat of neat cement on walls and bed

concrete etc. comp. Rate are also inclusive of outside

plaster 15mm thick in cm 1:3 from top of chamber and all

side up to 15cm deep below ground level. (I) Inside

dimensions are 455mm X 610mm X 450mm deep for multi

purpose pipe line.

78 Constructing Brick Masonary Chamber for underground C.I 13.00 No 4954.85 Rupees Four

inspection chamber and bends with brick having crushing Thousand Nine

stenghth not less then 35 kg/ cm2 in C.M 1:5 R.C.C top slab Hundred Fifty Four

1:2:4 mix (1 cement : 2 coarse sand :4 graded stone And Paise Eighty Five

aggregate 20mm nominal size ) with 8mm dia steel at 15 Only

cm. C.C and providing and fixing precast R.C.C cover 40 x

40 x 5 mm angle frame and foundation concrete 1:5:10

inside plaster 15mm thick with a flotting coat of neat cement

walls and bed concrete etc. complete. Rate are also

inclusive of outside plaster 15mm thick in C.M 1:3 from top

of chamber and all side upto 45cm deep for multi- purpose

pipe line. (i) 500 mm x 700mm

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

79 Extra over above item for additional depth of 0.1 m or part 13.00 No 262.24 Rupees Two Hundred

thereof beyond 450mm depth for brick masonary chamber Sixty Two And Paise

for (I) 500 x 700 Twenty Four Only

80 Half brick masonry in common burnt clay building bricks 20.00 Sqm 623.60 Rupees Six Hundred

having crushing strength not less than 35 Kg/Sq.cm. in Twenty Three And

cement mortar 1:4 (1-cement;4-coarse sand) in Foundation Paise Sixty Only

and Plinth, Conventional bricks. Bricks with frog only shall

81 Providing & Fixing Precast RCC Frame with Cover MD 10 13.00 No 1702.00 Rupees One

Ton (Rubber Mould Finish) Inner size 600 x 450 with all Thousand Seven

Neessary Fittings. Hundred Two Only

82 Providing, supplying and fixing Corrugated DWC HDPE 95.00 Rmt 229.00 Rupees Two Hundred

Pipes of Class SN8 Structured Wall polyethelene Piping Twenty Nine Only

systems (Pipe with online/offline coupler and elastomeric

sealing ring) with non-smooth External Annular Corrugated

and Smooth Internal Surfaces (Double Wall) for non-

pressure underground Sewerage & Drainage application as

per EN:13476-3 including all local and central taxes,

transportation, freight charges, octroi, inspection charges,

loading, unloading, conveyance to the departmental stores

etc. complete. (100 mm ID Dia) Including Lowering, laying

and jointing of class SN 8 structured wall ( External Annular

Corrugated & Smooth Internal surface) Polyethylene Piping

and fittings with the help of coupler ( on line / off line )

attached with one end of pipes, sliding over the elastomeric

sealing rubber ring placed on the specified valley of the

corrugation at the spigot end, lowering the same into the

trench, laying on the lower bedding

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

(constructed at bottom of trenches) at prescribed gradient,

depth & alignment ,testing the water tightness of the joints,

ensuring the continuity tests of specified pipe segments etc.

complete as per drawing, specifications & detailed

engineering, including carriage of pipes & fittings from site

stacks to the place of laying etc. as per direction of Engineer-

83 Providing, supplying and fixing Corrugated DWC HDPE 100.00 Rmt 396.00 Rupees Three

Pipes of Class SN8 Structured Wall polyethelene Piping Hundred Ninety Six

systems (Pipe with online/offline coupler and elastomeric Only

sealing ring) with non-smooth External Annular Corrugated

and Smooth Internal Surfaces (Double Wall) for non-

pressure underground Sewerage & Drainage application as

per EN:13476-3 including all local and central taxes,

transportation, freight charges, octroi, inspection charges,

loading, unloading, conveyance to the departmental stores

etc. complete. (150 mm ID Dia) Including Lowering, laying

and jointing of class SN 8 structured wall ( External Annular

Corrugated & Smooth Internal surface) Polyethylene Piping

and fittings with the help of coupler ( on line / off line )

attached with one end of pipes, sliding over the elastomeric

sealing rubber ring placed on the specified valley of the

corrugation at the spigot end, lowering the same into the

trench, laying on the lower bedding

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

(constructed at bottom of trenches) at prescribed gradient,

depth & alignment ,testing the water tightness of the joints,

ensuring the continuity tests of specified pipe segments etc.

complete as per drawing, specifications & detailed

engineering, including carriage of pipes & fittings from site

stacks to the place of laying etc. as per direction of Engineer-

84 Providing , laying (to level or slopes) and jointed 70.00 Rmt 356.28 Rupees Three

reiforced concrete light duty Nos.n pressure pipe IS class Hundred Fifty Six And

NP2 of 250 mm diameter with collars and but ends Paise Twenty Eight

prepaired for collar joints including testing of joints Only

85 Supplying, installation testing and commissioning of the 'C’ 71.00 Rmt 2562.73 Rupees Two

class MS Pipe as per IS1239 for undegound installation with Thousand Five

welded connection with tapering connecting pieces, short or Hundred Sixty Two

long bends, specials like sockets, union nuts, elbows, plugs, And Paise Seventy

tees etc. complete to make the system operative as Three Only

required by LFA, the pipes will have to be laid and fixed in

trenches. The scope shall also include excavation,

backfilling of soil, providing, warpping and coating of

pypkote (corrosion protection tape) with overlap of 15 to

mm) etc. complete. The scope shall also include hydraulic

testing at 1.5 times working pressure before wrapping &

coating. [B] 100 mm dia

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

86 Providing, laying, testing and commissioning of 'C' 8.00 Rmt 1652.39 Rupees One

class heavy duty MS pipe confirming to IS 3589/IS 1239 Thousand Six

including welding, fittings like elbows, tees, flanges, Hundred Fifty Two

tappers, nuts, bolts, gaskets etc and fixing the pipes on And Paise Thirty Nine

wall/ceiling with suitable clamps/support frame and painting Only

with 2 or more coats of synthetic enamle paint of required

shade complete as required. The work includes

makingholes in brick or RCC walls, slabs/ roofs and making

good the damages by bringing to the original condition to

the satisfaction of the Engineer in charge, painting two coats

of approved shade(Post office red) of enamelpaint over a

coat of approved primer.[D] 80mm dia.

87 Providing, laying, testing and commissioning of 'C' 10.00 Rmt 744.00 Rupees Seven

class heavy duty MS pipe confirming to IS 3589/IS 1239 Hundred Forty Four

including welding, fittings like elbows, tees, flanges, Only

tappers, nuts, bolts, gaskets etc and fixing the pipes on

wall/ceiling with suitable clamps/support frame and painting

with 2 or more coats of synthetic enamle paint of required

shade complete as required. The work includes

makingholes in brick or RCC walls, slabs/ roofs and making

good the damages by bringing to the original condition to

the satisfaction of the Engineer in charge, painting two coats

of approved shade(Post office red) of enamelpaint over a

coat of approved primer.[F] 25mm dia.

88 Supply and installation,testing and commisioning of 1.00 No 5845.97 Rupees Five

Butterfly valves of PN 1.6 ratings with bronze/gunmetal Thousand Eight

seat duly ISI marked complete with nuts, bolts, washers, Hundred Forty Five

gaskets confirming to IS 13095 of following sizes as And Paise Ninety

required:[B] 100mm dia. Seven Only

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

89 Supply and installation,testing and commisioning of 1.00 No 4368.46 Rupees Four

Butterfly valves of PN 1.6 ratings with bronze/gunmetal Thousand Three

seat duly ISI marked complete with nuts, bolts, washers, Hundred Sixty Eight

gaskets confirming to IS 13095 of following sizes as And Paise Forty Six

required:[A] 80mm dia. Only

90 Providing, fixing, testing and commissioning of non-return 1.00 No 9688.87 Rupees Nine

valve of following sizes conforming to IS: 5312 complete Thousand Six

with rubber gasket, GI bolts, nuts, washers etc. as required Hundred Eighty Eight

(B) 100mm dia. And Paise Eighty

91 Providing, fixing, testing and commissioning of non-return 1.00 No 6743.74 Rupees Six Thousand

valve of following sizes conforming to IS: 5312 complete Seven Hundred Forty

with rubber gasket, GI bolts, nuts, washers etc. as required Three And Paise

(C) 80mm dia. Seventy Four Only

92 Providing, fixing, testing and commissioning of Gun metal 2.00 No 7646.00 Rupees Seven

/SS single headed ISI marked oblique pattern hydrant Thousand Six

landing valves as per IS:5290 with 80mm dia flanged inlet Hundred Forty Six

and 63mm dia female outlet complete with gun metal cap. Only

93 Providing, fixing, testing and commissioning of Standard 2.00 No 1648.00 Rupees One

Gun /SS metal branch pipe with nozzle of 20 mm Thousand Six

nominal bore outlet as per IS:903 suitable to fit with Hundred Forty Eight

standard instanteneous type 63 mm dia coupling. Only

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

94 Providing and fixing 63 mm dia reinforced rubber lined 2.00 No 5202.00 Rupees Five

RRL RRL fire hose of approved grand conforming to IS Thousand Two

636 type A having brushing pressure of 37.20 Kg/cm2 and 2 Hundred Two Only

Nos of ISI marked of 15 mtr length fitting with necessary

gun metal 63 mm delivered hose pipe with 63 mm dia. Male

and female gun metal couplings duly binded with GI wire,

rivets etc. conforming to IS 636 (type-A) as required.

95 Providing, fixing, testing and commissioning of Weather 2.00 No 3453.00 Rupees Three

proof standard fire hose cabinet having single opening Thousand Four

with M.S. Fabricated Stand, necessary locking Hundred Fifty Three

arrangement by allan key suitable for housing 2 nos. hose Only

pipe, 1no. Branch pipe & nozzle spaner.

96 Providing & fixing orifice plate on fire hydrant valve 1.00 No 1321.00 Rupees One

including jointing materials having suitable base for reducing Thousand Three

the pressure hydrant outlet etc as directed. Hundred Twenty One

97 Supplying and fixing First Aid hose reel with MS 1.00 No 7606.61 Rupees Seven

construction spray painted in post office red, conforming Thousand Six

to IS 884 with upto date amendments, complete with the Hundred Six And

following as required. 30m long 25mm (nominal internal) dia Paise Sixty One Only

water hose thermoplastic (textile rainforced) type-2 as per

IS: 12585 25mm (nominal internal) dia S.S.Shut up valve &

nozzle. Drum and brackets for fixing the equipments on

wall. Connections from riser with stop valve (GM) & M.S.

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

98 Supplying and fixing of fire brigade connection of cast 1.00 No 5911.14 Rupees Five

iron Body with Gun metal male instantaneous inlet Thousand Nine

couplings complete with cap and chain as requireed. For Hundred Eleven And

suitable dia MS pipe connection confirming to IS 904 as Paise Fourteen Only

required. (1) 2 way - 100mm dia MS pipe

99 Supply, Installation, Testing & commissioning of 25 mm dia 4.00 No 1097.50 Rupees One

gun metal ISI mark Gate Valve with 15 mm dia nipple as Thousand Ninety

complete as directed. Seven And Paise Fifty

100 providing & fixing emergency escape signes printed on 432.00 Sq.inch 14.65 Rupees Fourteen And

rigid PVC sheet / acrylic sheet 4 mm thick Paise Sixty Five Only

photoluminescent auto glow type of approved quality

including fixing on door, wall, celling complete with

installation as directed. For Escape & Fire Sign.[C] Fire

101 Box cutting the road surface to proper slpope and 62.00 Cum 108.33 Rupees One Hundred

chamber for making a base for road work including Eight And Paise Thirty

removing the excavated stuff and disposing on the road side Three Only

slope as directed upto 50m lead.

102 Construction of Granular Sub base by Providing 18.00 Cum 950.52 Rupees Nine Hundred

Couarse graded material Spreading in uniform Layers Fifty And Paise Fifty

With motor grader on prepared surface mixing by mix in Two Only

place method with rotavator at OMC and Compacting with

Vibratory roller to achieve the desired density complete as

per table 400-2

103 Supplying of graded stone aggregate of following sizes (for 14.00 Cum 928.63 Rupees Nine Hundred

W.B.M. Road) (3) Crushed stone aggregate for Hard Twenty Eight And

Quality up to 63mm size. Paise Sixty Three

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

104 Spreading the stone aggrete for soling and W.B.M incl. 14.00 Cum 259.64 Rupees Two Hundred

filling the interstics forming the surface to required camber Fifty Nine And Paise

and gradient (ii)40 mm to 63 mm .Size aggregate M/c. Sixty Four Only

105 Supplying of murum on W.B.M surface etc. complete 4.00 Cum 303.20 Rupees Three

Hundred Three And

Paise Twenty Only

106 Spreding blidage or road crust filling the gaps in metal and 4.00 Cum 153.31 Rupees One Hundred

leveling to cambert and gradient as directed .(i)Murrum Fifty Three And Paise

Thirty One Only

107 Rolling and consolidating water bound macadam ( 522.00 Sqm 15.72 Rupees Fifteen And

except letevite and kankar) including watering not exceeding Paise Seventy Two

150 mm thickness ( main layer including binding materials ) Only

including filling in depression which occurs during the

process (A) With power roller exceeding 8 tonne and not

exceeding 12 tonne

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

108 Construction of Concrete Road using Tremix system 32.00 Cum 4649.03 Rupees Four

19CM thick M - 300 concrete mixing as per mix design, Thousand Six

conplast P 211 water reduction concrete admixture @ Hundred Forty Nine

100M.L per bag of cement with mixing of Recron - 3S fibers And Paise Three Only

[Reliance or equivalent product] at 125 gms per bag of

cement with providing and fixing & removing of "C" channel

having size 75mm x 75mm as per required level slope and

thickness of concrete road floor levelling of placed concrete

with surface vibrator finishing the surface worth power

floater and trowel light booming on the surface as directed

with providing expansion joint size 20 x 115mm & filling the

expansion joint having size 20mm x 20 mm by using colpar

200 as per manufacture specification with making of

construction joint by cutting of joint of size 3mm x 20mm by

using of concrete cutter machine including curing etc.

109 Providing and Fixing CAPCELL HD 100 pre- moulded 2.00 Sqm 795.27 Rupees Seven

compressible filler board in black colour confirming to Hundred Ninety Five

MORT&H Specifications (Clause 1015). having minimum And Paise Twenty

density 95kg/cum.metre, non-staining with less than 1% Seven Only

water absorption & compression recovery of 93% minimum

as per specification for 20 mm wide expansion joint

including cutting to required size and shape at all levels etc.

complete as directed.

110 Providing and fixing 25 mm diameter backup rod having 21.00 Rmt 255.52 Rupees Two Hundred

minimum density 22 kg per cum (ASTMD - 3575) & Fifty Five And Paise

compression strength of 0.40 kg per Sqm (ASTM 5249) and Fifty Two Only

finishing with polysulphide sealant etc. complete. For 20 mm

wide expansion joint

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

111 Providing Groove cutting in C.C. Road incluing cleaning 60.00 Rmt 36.80 Rupees Thirty Six

etc.complete as per direction of Engineer incharge And Paise Eighty

112 Providing pre-moulded ashphalt filler joints as per 4.00 Sqm 548.31 Rupees Five Hundred

drawings (A)12mm Forty Eight And Paise

Thirty One Only

113 Finishing Ceiling / Slope Surfaces with Plastic Emulsion 283.00 Sqm 193.02 Rupees One Hundred

Paint on Ceiling / Slope Surfaces (Two Coats) to give an Ninety Three And

Required shape and even shade after thoroughly brushing Paise Two Only

the surface to remove all dirt, and remains of loose

powdered materials etc. complete. Rate are inclussive of

Applying Two Coats of Lappy (Putty) and One Coat of

Primer on New celing / slope Surfaces to give an even

shade including throughly brushing the surface free from

mortar droppings and other foreign matter and sand

papered smooth. Fine Putty Primer and Plastic Emulsion

Paint Shall be used as per approved material list by

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

114 Finishing wall with Plastic Emulsion Paint on wall 792.00 Sqm 179.92 Rupees One Hundred

Surfaces (Two Coats) to give an Required shape and even Seventy Nine And

shade after thoroughly brushing the surface to remove all Paise Ninety Two

dirt, and remains of loose powdered materials etc. Only

complete. Rate are inclussive of Applying Two Coats of

Lappy (Putty) and One Coat of Primer on New wall Surfaces

to give an even shade including throughly brushing the

surface free from mortar droppings and other foreign matter

and sand papered smooth. Putty, Primer and Plastic

Emulsion Paint Shall be used as per approved material list

115 Finishing walls with Weather Proof Exterior Emulsion 1121.00 Sqm 153.35 Rupees One Hundred

Paint on Wall Surfaces (Two Coats) over and above Fifty Three And Paise

Applying one coat of Primer to give an Required shape and Thirty Five Only

even shade after thoroughly brushing the surface to remove

all dirt, and remains of loose powdered materials etc.

complete. Primer and Exterior Emulsion Paint shall be

used as per approved material list of GSPHCL.

116 Providing & Fixing Wall Hung with PVC Flush Tank, Soft 4.00 No. 5470.90 Rupees Five

Seat Cover & intergal "P" or "S" Trap including Jointing the Thousand Four

Trap with Pan and Soil pipe. Wall hung shall be fixed on S.S Hundred Seventy And

heavy duty rack bolt having 16mm dia, 165mm length using Paise Ninety Only

Plastic sleeve Make by Using Drill Bitt Only. Rate are

inclusive of all matreials, Labour & Necessary Fittings etc.

Complet as per Detailed Drawings, Specifications and as

per the Instruction of Engineer In charge.The Model & Make

of Wall Hung & Flush tank Shall be as per the Approved

Make List of G.S.P.H.C.L.

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

117 Providing & Fixing Health Faucets (ABS Body). Rate are 4.00 No. 565.61 Rupees Five Hundred

inclusive of all matreials, Labour & Necessary Fittings etc. Sixty Five And Paise

Complet as per Detailed Drawings, Specifications and as Sixty One Only

per the Instruction of Engineer In charge. The Model &

Make of Health Faucets Shall be as per the Approved Make

List of G.S.P.H.C.L.

118 Providing & Fixing Single Hole Wash Basin with C.I or M.S. 4.00 No. 3935.33 Rupees Three

brackete & M. I . fisher union, P.V.C water pipe with Thousand Nine

Connection from Stop Cock to Pillar Tap, PVC Bottle Trap Hundred Thirty Five

with Connection 32mm dia. C.P. brassa waste coupling etc. And Paise Thirty

Complete. Rate are inclusive of all matreials, Labour & Three Only

Necessary Fittings etc. Complete as per Detailed Drawings,

Specifications and as per the Instruction of Engineer In

charge. The Model & Make of Wash Basin Shall be as per

the Approved Make List of GSPHCL.

119 Providing and fixing Table Top Wash Basin Size 430mm X 3.00 No. 3330.76 Rupees Three

335mm (Table Top) Wash Basin single hole for piller tap Thousand Three

with C.I or M.S. brackete painted white including cutting Hundred Thirty And

holes and making good the same but including fitting (A) Paise Seventy Six

Vitreous chaina :(II ) Table Top wash basin 430mm x Only

335mm size including provinding and fixing C.P. brassa

waste coupling 32mm dia P.V.C water pipe M. I . fisher

union 32mm dia C.P brass pillar trap of 15mm dia

Complete including PVC connection pipe from stop cock to

pillar tap and 32mm dia waste pipe up to N.T etc.

Complete. with 40mm dia c.p brass waste and M.I fisher

and 15mm dia pillar cock.and Fixing On Granite Slab with

Complete Necessary fittings

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

120 Providing & Fixing Urinal with P.V.C water pipe, 32mm 2.00 No. 1615.72 Rupees One

dia. C.P. brassa waste coupling with Connection 32mm dia Thousand Six

waste Pipe etc. Complete. Rate are inclusive of all Hundred Fifteen And

matreials, Labour & Necessary Fittings etc. Complete as per Paise Seventy Two

Detailed Drawings, Specifications and as per the Instruction Only

of Engineer In charge. The Model & Make of Urinal Shall be

as per the Approved Make List of GSPHCL.

121 Providing & Fixing 15mm One way Bib Tap with Wall 11.00 No. 990.61 Rupees Nine Hundred

Flange. Rate are inclusive of all matreials, Labour & Ninety And Paise

Necessary Fittings etc. Complet as per Detailed Drawings, Sixty One Only

Specifications and as per the Instruction of Engineer In

charge. The Model & Make of 15mm One way Bib Tap Shall

be as per the Approved Make List of G.S.P.H.C.L.

122 Providing & Fixing Two way Bib cock with Wall Flange. 3.00 No 1309.39 Rupees One

Rate are inclusive of all matreials, Labour & Necessary Thousand Three

Fittings etc. Complet as per Detailed Drawings, Hundred Nine And

Specifications and as per the Instruction of Engineer In Paise Thirty Nine

charge. The Model & Make of Two way Bib Tap Shall be as Only

per the Approved Make List of G.S.P.H.C.L.

123 Providing & Fixing Bib Tap with Wall Flange. Rate are 3.00 No 184.98 Rupees One Hundred

inclusive of all matreials, Labour & Necessary Fittings etc. Eighty Four And

Complete as per Detailed Drawings, Specifications and as Paise Ninety Eight

per the Instruction of Engineer In charge. The Model & Only

Make of Bib Tap Shall be as per the Approved Make List of

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

124 Providing & Fixing Wall Mounted Sink Cock with Extended 2.00 No 1330.32 Rupees One

Swivel Spout & Wall Flange . Rate are inclusive of all Thousand Three

matreials, Labour & Necessary Fittings etc. Complete as per Hundred Thirty And

Detailed Drawings, Specifications and as per the Instruction Paise Thirty Two Only

of Engineer In charge. The Model & Make of Sink Cock

Shall be as per the Approved Make List of GSPHCL.

125 Providing and fixing ball cock of approved quality as 1.00 No 161.02 Rupees One Hundred

directed. (A) Copper Metal ISI Mark. (ii) 50 mm dia. Sixty One And Paise

126 Providing and fixing 600mm x 450mm bevelled edge 7.00 No. 850.90 Rupees Eight

Mirror or superior glass mounted on 6mm thick A.C. sheet Hundred Fifty And

or plywood sheet and fixed to wooden plugs with C.P. brass Paise Ninety Only

screw and washers.

127 Providing & Fixing Towel Ring. Rate are inclusive of all 8.00 No. 909.08 Rupees Nine Hundred

matreials, Labour & Necessary Fittings etc. Complete as per Nine And Paise Eight

Detailed Drawings, Specifications and as per the Instruction Only

of Engineer In charge. The Model & Make of Towel Ring

Shall be as per the Approved Make List of GSPHCL.

128 Providing and fixing SS Cloth Hanger (5 Hook) as per detail 13.00 No. 249.85 Rupees Two Hundred

Drawing & as directed Engineer In charge, Rate ar inclusive Forty Nine And Paise

of all material, Labour,Taxes (Samrat Brand) Eighty Five Only

129 Providing, Supplying and Fixing Single Pipe Bracket 100.00 No. 182.83 Rupees One Hundred

System with U Bolt Rubber mounted for Pipe Supporting Eighty Two And Paise

Clamping System for External Vertical Fixed line with wall Eighty Three Only

distance 3" including nuts, bolts, fastners etc complete as

per detailed Specifications and as directed by Engineer in

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

130 Providing and Fixing S4 Channel System (S4 Channel + 48.00 No. 421.58 Rupees Four Hundred

Profile Backet + U Bolt Rubber mounted System) for Twenty One And

multiple Pipes for External Vertical Fixed line with wall Paise Fifty Eight Only

distance 3" including nuts, bolts, fastners etc complete as

per detailed Specifications and as directed by Engineer in

131 Pro and Making 3 nos of groove total length of stair case 54.00 Sqm 82.80 Rupees Eighty Two

tread of size 10mm x 10mm finishind smooth in parallel And Paise Eighty

line.equality spaced as per direction of engineer in charge in Only

all type of flooring etc complete.

132 Fabrication, Supply and Installation of stainless steel 4.00 Rmt 911.03 Rupees Nine Hundred

(Grade - 304) Railing using hand rail [Dasso] single Pipe Eleven And Paise

section 2" and Round pipe section 2" both these with Three Only

necessary fixtures fittings, brush finish, proper buffing &

Cleaning the welding marks etc. complete as per detail

drawing OR as directed by the Architect / Engineering in

Charge. Only 16 gauge Stainless Steel Material should

133 Providing and Fixing Teak wood door frame patti 40mm x 45.00 Rmt 71.01 Rupees Seventy One

10mm thick as per detail drawing and as directed by And Paise One Only

engineer in charge. Rates are inclusive of all material,

labour and taxes etc. Complete

134 Providing and Fixing WPC door patti 24mm x 6mm thick as 15.00 Rmt 57.02 Rupees Fifty Seven

per detail drawing and as directed by engineer in charge. And Paise Two Only

Rates are inclusive of all material, labour and taxes etc.

135 P & F stainless steel Letters 32.50cm Height and 4.5cm 84.00 No. 1139.48 Rupees One

wide with spraying colour on surface etc. complete as Thousand One

Directed. [For 13" inch height] Hundred Thirty Nine

And Paise Forty Eight

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

136 Providing a I.S.I. mark 7 levers three key brass pad lock of 9.00 No. 211.86 Rupees Two Hundred

NAVATAL (Godrej) make 65mm dia on completion of Eleven And Paise

project. Eighty Six Only

Electrical work

137 Providing and erecting Point wiring with 1.1 KV grade ISI 100.00 Point 481.00 Rupees Four Hundred

[a] marked 2 X 1.5 sq. mm copper PVC insulted FRLS wire Eighty One Only

with 1.5 sq. mm (green) copper PVC insulated FRLS wire

for earth continuity in FIA approved ISI mark medium class

white colour 20/25 mm dia. embossed rigid PVC pipe with

PVC fitting fixed with adhesive solution erected on/in Brick

Wall / slab along with continuous G.I. fish wire to draw

wires and laid in approved manner zari for PVC pipe and

boxes shall be filled with cement mortar and finishing the

surface to match the wall / ceiling complete with approved

make 5/6 Amp. ISI make modular type switch and

accessories mounted in 20 G. G.I. company fabricated

metallic box covered with appropriate front plate modules

erected flushed with wall / ceiling with necessary modular

lamp holder / modular ceiling rose / HD Connector (make &

model approved by EIC and matching colur with switches

accessories) as directed (Deep Junction box 75mm depth if

required) for concealed wiring. Light point. Cat.-III.

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

Necessary sheet / tape / polythene / sand must be erected

or filled in all box to prevent mortar going into the box.

Length of point wiring must not increase than 10 mtr. For

that necessary switch boards and their locations must be

finalised before execution by agency otherwise payment will

not be done for extra long point. (For future extention, if

required, agency has to erect one higher size metal box and

modular plate as per instruction of EIC. Cost of blank plate

shall be paid as per tender item) [Wire must be having box

packing] [This item include cleaning (inside/outside) of all

G.I. switch boards, electric point box, fan box, MCBDB &

box cutting plaster finishing for modular plate B14without

any gap] [conductor resistance should be as per

137 For Bell Point Cat.-III 1.00 Point 481.00 Rupees Four Hundred

[b] Eighty One Only

137 For Fan Point (with 6 A. Modular type switch and two 15.00 Point 668.00 Rupees Six Hundred

[c] module hum free EME Five step type Electronic fan Sixty Eight Only

regulator both having ISI mark) Cat.-III

137 For separate Point (with 6 Amp. Switch & 3/5 pin socket 17.00 Point 505.00 Rupees Five Hundred

[d] both having ISI mark) Cat.-III Five Only

137 For Looped on switch board (with 6 Amp. Switch & 3/5 55.00 Point 255.00 Rupees Two Hundred

[e] pin socket both having ISI mark) Cat.-III. Fifty Five Only

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

138 Providing and erecting 1.5 mm thick FIA approved and ISI 230.00 Mtr. 24.00 Rupees Twenty Four

[a] mark (embossed) RIGID white Colour PVC PIPES of Only

following size complete erected with necessary PVC fittings

& Junction boxes fixed with adhesive solution concealed in

wall / slab along with contineous fish wire to draw mains,

laid in approved manner with plastering by cement mortar &

finishing the surface to match the wall / ceiling. 20 mm dia.

138 25 mm dia. 80.00 Mtr. 33.00 Rupees Thirty Three

139 Providing and laying Mains with FRLS PVC Insulated 340.00 Mtr. 62.00 Rupees Sixty Two

[a] wire ISI marked 1.1 KV grade with FIA approved ISI mark Only

medium class 20/25/32 mm dia. embossed rigid PVC pipe

with PVC fitting fixed with adhesive solution to be erected

on/in brick wall / slab along with continuous G. I. fish wire to

draw mains laid in approved manner with plastering by

cement mortar & finishing the surface to match the wall /

ceiling complete with FRLS PVC insulated wire for earth

continuity. (Approved ISI make only) [a] 2 x 1.5 sq.mm.

FRLS copper multi stranded conductor mains with

sq.mm. FRLS copper multi stranded conductor for earthing

as per standard colour code. [conductor resistance should

be as per IS:8130/1984]

139 2 x 2.5 sq.mm. FRLS copper multi stranded conductor 40.00 Mtr. 82.00 Rupees Eighty Two

[b] mains with 1.5 sq.mm. FRLS copper multi stranded Only

conductor for earthing as per standard colour code.

[conductor resistance should be as per IS:8130/1984]

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

139 2 x 10.0 sq.mm. FRLS copper multi stranded conductor 120.00 Mtr. 234.00 Rupees Two Hundred

[c] mains with 4.0 sq.mm. FRLS copper multi stranded Thirty Four Only

conductor for earthing as per standard colour code.

[conductor resistance should be as per IS:8130/1984]

140 Providing & fixing 20 mm. dia. PVC insulated G.I. 50.00 Mtr. 30.95 Rupees Thirty And

Corrugated Flexible pipe with necessary socket, PVC Paise Ninety Five

bushes, saddle, Check-nuts etc. complete of following sizes. Only

141 Providing & fixing 25 mm. dia. PVC insulated G.I. 10.00 Mtr. 37.14 Rupees Thirty Seven

Corrugated Flexible pipe with necessary socket, PVC And Paise Fourteen

bushes, saddle, Check-nuts etc. complete of following sizes. Only

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

142 Providing and fixing Plug Point wiring with 1.1 KV grade 13.00 Point 738.00 Rupees Seven

ISI marked approved make 2 x 2.5 sq.mm copper PVC Hundred Thirty Eight

insulated FRLS wire with 1.5 sq.mm (green) copper PVC Only

insulated FRLS wire for earth continuity in FIA approved ISI

mark white colour medium class 20/25 mm dia.

embossed rigid PVC pipe with PVC fitting fixed with

adhesive solution erected in wall/slab along with continuous

G. I. fish wire to draw wires and laid in approved manner

zari for PVC pipe & boxes shall be filled with cement mortar

& finishing the surface to match the wall / ceiling complete

with 16 Amp Modular type Swich and accessories mounted

in 20 G. GI company fabricated metallic box covered with

appropriate front plate modules erected flushed with wall.

(a) 16 Amp. Indicator switch & 1 No. 6/16 A universal

socket white colour suitable for 3 pin top duly both

having ISI mark. Cat.-III (Necessary sheet / tape /

polythene / sand must be erected or filled in all box To

Prevent Mortor Going In To The Box) [conductor resistance

should be as per IS:8130/1984]

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

143 Providing and erecting Plug Point wiring with approved ISI 2.00 Point 863.00 Rupees Eight

marked 1.1 kv grade 2 x 4.0 sq.mm copper PVC insulated Hundred Sixty Three

FRLS wire with 2.5 sq.mm (green) copper PVC insulated Only

FRLS wire for earth continuity in FIA approved ISI mark

white colour medium class 20/25 mm dia. embossed rigid

PVC pipe with PVC fitting fixed with adhesive solution

erected in wall / slab along with continuous G.I. fish wire to

draw wires and laid in approved manner zari for PVC pipe

& boxes shall be filled with cement mortar & finishing the

surface to match the wall / ceiling complete with approved

make 16 Amp. Modular type switch and accessories

mounted in 20 SWG GI company fabricated metallic box

covered with appropriate front plate modules erected

flushed with wall / ceiling. (a) 20 Amp. indicator switch &

No. 20 A universal socket white colour suitable for 3 pin

top duly both having ISI mark. (A.C POINT ONLY)

(Necessary sheet / tape / polythene / sand must be erected

or filled in all box To Prevent Mortor Going In To The Box)

Cat.-III. [conductor resistance should be as per

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

144 Providing and erecting Plug Point wiring with approved ISI 1.00 Point 991.00 Rupees Nine Hundred

marked 1.1 kv grade 2 x 4.0 sq.mm copper PVC insulated Ninety One Only

FRLS wire with 2.5 sq.mm (green) copper PVC insulated

FRLS wire for earth continuity in FIA approved ISI mark

white colour medium class 20/25 mm dia. embossed rigid

PVC pipe with PVC fitting fixed with adhesive solution

erected in wall/slab along with continuous G.I. fish wire to

draw wires and laid in approved manner zari for PVC pipe

& boxes shall be filled with cement mortar & finishing the

surface to match the wall / ceiling complete with 1 No.

Amp. Modular type Single pole MCB Swich and 1 no.

16/25 Amp. universal 3 pin socket suitable for 3 pin top

duty [Both Having ISI mark must] mounted in 20 G. G.I.

company fabricated metallic box covered with appropriate

front plate modules erected flushed with wall. Above

accessories will be erected combined or separately as per

site requirement and instruction of EIC. Cat.-lII (Necessary

Sheet Must Be Erected On All Box To Prevent Mortar Going

Into The Box) (Geyser point) [conductor resistance should

be as per IS:8130/1984]

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

145 Providing & Erecting 2.0 mtr long Earthing system by 5.00 Each 7025.00 Rupees Seven

making minimum bore of 225 mm dia in soft soil. Suitable Thousand Twenty

for doing pipe-in-pipe technology earthing.Earthing electric Five Only

rod must be made from Corrosion free Hot dip galvanizing

pipes having following specification.

(A) Earthing Electrode: outerpipe:- 88 mm minimum O.D.,

ISI 'B ' Class ISI mark of Reputed Brand, Inner pipe:-

mm minimum O.D., Pipe B Class ISI mark reputed Brand

Terminal Size: 70mm X 100mm length, Terminal Should be

made from inner pipe for that pipe must be pressed and

gave rectangular shape so its work as a terminal.The hot

deep galvanising must be done after above

process.Galvanised thickness must be minimum 75 micron

any where. SS Nut bolt:- 2 no.with washer suitable for

14mm dia. hole must be provided at terminal. total minimum

Weight(approx.) of earth electrodewith inside conductive

material minimum should be 25 kg.

(B) Inner chemical (CCM Compound)- Resistivity:-

ohm/meter testing as per IEC 62561-2017, Voltage drop:- <

1 volt at no load & dry form, Sulphar content:- <2%

(C) Back fill Compound:- Earthing compound should be

capable to retain moisture for long time Back Filling

Compound weight is 25 Kg.

(D) Chamber and cover:- Earthing chamber should be size

of 400 mm X 400 mm X 400 mm depth and Cover should

be heavy duty cast iron with required size of 300 mm X

mm X 4 mm thick.

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

Necessary test report must be submitted.

1. Short circuit test by ERDA/ CPRI for 25KA

2. Resistivity test of conducting material from NABL

accredited lab.

3. Hot dip galvanised / zinc coating micro test from reputed

4. General test report from OEM regarding specification of

[Make and model approved by EIC Strictly subject to item

specification only] [OEM has to submit all detail & sample

for approved before supplying]

[Water must be poured in bore before starting earthing.

Earthing value must be measured with earth tester. Agency

has to bring the earth resistance to at least 02 ohms &

voltage between neutral & Earthing upto 02 volt. Agency

has to maintain earthing & its value for one year. Earthing

must be done in the presence of A.E. (GSPHCL)]

146 For Above Earthing Additional charges for boring in hard 5.00 Each 276.00 Rupees Two Hundred

rock soil (By Breaker) & filling soft soil in earth pit. Seventy Six Only

(Certificate for soil have to given by DEE/AE along with

147 Supplying and erecting M.S./G.I. metal box having 16 50.00 Sq. Inch 5.81 Rupees Five And

Gauge painted with red oxide be concealed in wall with Paise Eighty One

necessary plastering & finishing with 3 mm thick laminated Only

sheet with grooving as directed of following depth 3" depth.

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

148 Providing and erecting following type of Modular Type 3.00 Each 159.00 Rupees One Hundred

[a] Accessories mounted with 20 G G.I. company fabricated Fifty Nine Only

metalic box, single mounting base frame covered with

textured / metallic front plate, modules erected with

necessary connection. As desired by Engineer in charge.

TV Co-axial Socket outlet. Cat.-III

148 Blank plate single, CAT-III 30.00 Each 25.00 Rupees Twenty Five

149 Providing and erecting modular type accessories mounted 3.00 Each 629.00 Rupees Six Hundred

on 20G G.I. company fabricated galvanised metal box Twenty Nine Only

covered with approriate front plate modules erected flushed

with wall/Ceiling with 1 Nos. of 16 Amp SP Switch &

Nos. of 6 Amp 3/5 pin plug. [For TV Switch board] Cat.-

150 Providing & Erecting following size of TV Co-axial flexible 90.00 Mtr. 39.00 Rupees Thirty Nine

cable comprising inner conductor of solid bare copper Only

insulated with Foam PE & Secondary conductor made of

poly - Aluminium film bonded Al. Braids @ suitable

coverage overall sheathed with black PVC insulation.

(FINOLEX / POLYCAB / RRKABEL) [b] RG-6

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

151 Supplying and Eracting LED indoor fitting of approximately 4 52.00 Each 370.00 Rupees Three

Feet long with LED of Wattage 0.2W to 0.5W assemble on Hundred Seventy

single MCPCB with housing use as a hint sink shall be Only

made from aluminum extrusion having enough strength

(sample must be approved by EIC) with polycarbonate

diffuser with following specification: (A) Company

mark/name on the fitting, (B) Rated input voltage and

frequency : 220V to 240 VAC ; 50Hz , (C) Rated input

wattage: 24W, (D) Rated input Current 0.2 A, (E) Power

Factor : Min. 0.90, (F) ATHD : Max. 15%, (G) Rated

Luminous flux : 2420 lm, (H) CCT : 6500K , (I) CRI : Min.

80Ra, (J) LED life span : Min.5000 Hrs @ L70, (K) Driver

Efficiency : Min. 80%, (L) Over Voltage protection:

Withstand up to 440V/AC for 4 Hrs, (M) Surge Protection :

Min. 2KV, (N) IP Rating : IP20, (O) IK Rating : IK02, (P)

Short circuit, Open Circuit & Reverse Polarity Protection

must be provided, (Q) Fixing clamp design & strength

should be sufficient to hold the fitting eracted on wall or

ceiling, (R) 3 Core copper wire of appropriate size with

earthing connector (Note:- The manufacturer/authorized

Channel partner of the manufacturer has to submit 5 Yrs

free replacement Guarantee for complete Fixture) [

Approval will be given strictly subject to item specification]

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

152 SITC of Indoor Commercial Recess / Surface mounted 6.00 Each 751.00 Rupees Seven

(IP20) 24 W Cool/Warm white Color LED Down lighter Hundred Fifty One

office Lighting Luminaire with separate potted driver with Only

single piece pressure die cast aluminium alloy housing with

corrosion resistant powder coated finish with

PMMA/PS/Injection moulded Polycarbonate diffuser with

high brightness LED complete (only from Philips Lumileds,

CREE, Nichia, Bridgelux, Seoul & Osram) CRI > 80, with

W. The LED's should be mounted on backlite metal core

PCB for better heat conduction and long life of LED. The

Fixture should comply all International Standarad third party

(LM 79 for complete fixture, LM80 for individual LED). The

Fixture have protection like miswiring, over voltage, over

load, wrong wiring, THD < 15%,, P.F > 0.95, efficiency ≥

lm/w & driver efficiency > 85%. For 24 W fixture wide

voltage range from 160 V to 270 V, 50/60 HZ @ 240V

application, 2 KV surge protection.

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

The fixure must have min. 2160 lumen light output. The

fixture should be provided with external separate Potted

driver, latest Valid BIS approved Luminaire and driver. The

Fixture efficiency ≥ 90 lumens/watt only for safety and

performance. (L70 @ 30,000 Hrs.) The fixture should be

able to easily mount on POP / Grid false ceiling. The

Luminiare should be tested as per IP 20 and following test

reports should be submitted at the time of approval: heat

resistant test, thermal test, Ingress protection test, drop test,

Photobiological report with 3 core X 1.0 Sq.mm. flexible wire

as per site requirment [Note:-The manufacturer / authorized

Channel partner of the manufacturer has to submit 5 yrs.

free replcement Guarantee for complete Fixture]

153 Supplying and erecting 3 W LED lamps with following 1.00 Each 69.00 Rupees Sixty Nine

wattage capacity of 220 to 240 voltage, minimum 15000 Only

burning hours life, 500 V in built-surge

protection,Polycarbonate diffuser, mounting suitable for E14

/ E27 / B22 lamp holders, pf >= 0.5 (A) LED Lamps integral

type, with PC diffuser suitable LAMP holder

154 Supplying and erecting 8 W LED lamps with following 22.00 Each 111.00 Rupees One Hundred

wattage capacity of 220 to 240 voltage, minimum 15000 Eleven Only

burning hours life, 500 V in built-surge

protection,Polycarbonate diffuser, mounting suitable for E14

/ E27 / B22 lamp holders, pf >= 0.5 (A) LED Lamps integral

type, with PC diffuser suitable LAMP holder

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

155 Providing and erecting max. 10 watt LED battern having 3.00 Each 309.00 Rupees Three

main housing aluminium extruded & front cover of Hundred Nine Only

polycarbonate. Electrically & photomatry parameters are as

undr: 240 V, 50 Hz, System wattage 10 w ± 10 %, PF ≥

0.95, system luments min. 1000, CCT- 3000K to 6500K,

CRI ≥ 80, THD ≤ 15%, delivery efficiency ≥ 85%, LM80

Certified LED, 30000 hrs. @ L70, Electronic CC driver,

insulated copper wire for internal wiring, IP20, operating

voltage: 160 to 270 V, Surge - 2 KV, Length of fitting should

156 Providing and erecting Polycarbonet body surface mounting 2.00 Each 780.00 Rupees Seven

LED Bulk head type 9 watt Lighting Fitting with electronic Hundred Eighty Only

driver having THD < 15%, CRI>80, P.F.0.95 And lumen

output from luminaire 720 lm, input voltage range 90-300 V

AC, 50 Hz cool white (3000 to 6500 k), inbuilt driver having

efficiency >=80lm/w, -20 deg C to + 60 deg C working

temperature, AL frame with Beam Angle 120 deg.

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

157 Providing, erecting, testing Ceiling Fan confirming to IS: 16.00 Each 1929.00 Rupees One

374/1979 AMDT No. 1 to 6 Class-I, 50 Hz. Specification of Thousand Nine

Ceiling Fan must be as per below. (1) Sweep: 1200 mm, (2) Hundred Twenty Nine

Operating Voltage: 180 to 230 V, (3) Power Factor: > 0.9, Only

(4) Power Consumption: maximum 53W, (5) RPM: minimum

330, (6) Service value:min 4.3 m3/min. (7) Class of

insulation: 'B', (8) No. of heavy duty premium quality Ball

bearing: Two, (9) Total Body: Top & Bottom should be

alluminium, (10) Blade: Aluminium approx 1.1 mm thick,

(11) Colour: White high grade powder coating, (12) Canopy:

Two Nos. Heavy duty, (13) Condenser: 1.5 MFD Aluminium

body premium quality, Branded make, (14) Down road: up

to 1.0 mtr as per site requirment, (15) Required fixing

accessories, (16) 3 core 0.50 sq.mm ISI wire as per site

requirment, (17) No vibration and noise due to mechanical

parts. (Agency has to erect safey wire with ceiling fan and

checked with EIC) (OEM has to approved model as per

tender specification and tested at ERDA) (Necessary test

reports should be submitted strictly at the time of approval.

Sample approved by EIC subject to above specification

158 Supplying & erecting approved make low noise Decorative 4.00 Each 1687.00 Rupees One

exhaust fan having size 150/200 mm with 1350 RPM with Thousand Six

round / square frame ABS/metalic body with Grill / inbuilt Hundred Eighty

lowers. (make & model approved by EIC as per Seven Only

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

159 Supplying & erecting single phase approved make industrial 2.00 Each 3052.00 Rupees Three

exhaust fan suitable for medium duty ring mounted low Thousand Fifty Two

noise operation suitable for medium duty having following Only

dia size and maximum speed in RPM [C] 380 mm dia

RPM (make & model approved by EIC as per specification)

160 Supplying and erecting approved make Cabin fan of 230V. 8.00 Each 2085.00 Rupees Two

A.C. 50 Cy/s. 400 mm. sweep oscillating type complete Thousand Eighty Five

erected with lead wires as directed. (make & model Only

approved by EIC as per specification) Cat.-II

161 Supplying & Erecting Fan Hook Of 10 mm M.S Round bar 16.00 Each 125.00 Rupees One Hundred

bounded to the RCC bars up to 50 mm Length each side & Twenty Five Only

piereced through 18 Gauge G.I Box having 125 mm dia

depth of 75 mm complete erected concealed in ceiling with

necessary round modular plate

162 Providing & erecting Fan clamp of 30 x 5 mm flat of 2.00 Each 98.00 Rupees Ninety Eight

required length & 10 mm M.S. Bolt & Nuts erected with Only

necessary hook of 10 mm M.S. Round Bar.

163 Supplying & Erecting Decorative Ding Dong bell Stereo 1.00 Each 170.00 Rupees One Hundred

type 250 Volt complete erected on existing polished wooden Seventy Only

block or in M.S. box with 3mm thick white ISI mark

laminated sheet. (make & model approved by EIC as per

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

164 Supplying & erecting 19/20 mm. nominal bore "B" class 2.00 Rn.Mtr 107.00 Rupees One Hundred

G.I. pipe / M.S. pipe down rod erected duly painted for fan Seven Only

complete with necessary 24/0.2 flat 3 core flexible Core with

earthing. [The down rod thikness, hole, locking

arrangement, construction, poweder coating, colour shed

should be same as original down rod brought with ceiling

fan. For that agency has to give original down rod sample to

fabricator and one sample down rod should be approved

with EIC. After approval given by EIC, agency can use the

down rod as per approved sample. If without approval down

rod will be erected on site, agency has to replace them with

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

165 Providing & erecting weather proof, dust & vermin proof, 1.50 Sq. Mtr. 16230.00 Rupees Sixteen

floor mounted front operated indoor type cubical panel Thousand Two

board having IP-42 & above protection as per approval from Hundred Thirty Only

engineer incharge and made from 2 mm. thick CRC M.S.

sheet for outer body & doors, 1.6 mm. thick CRC M.S. sheet

for internal partitions with necessary supporting angles, flats

including skirting, bending, drilling, welding, riveting with

internal partitions & cable alley as per requirements &

instruction of engineer-In-Charge with erection of supplied

switchgears, busbars with suitable size of interconnecting

PVC copper wire / Copper-Aluminium strips, rubber

gromets, rib, control wires, backelite control fuses,

measuring instruments, earth bus & earth bolts, foundation

flange-bolts-base plates, sufficient nos. of hinged doors,

handle with locking arrangement, rubber gasket complete

with Required Nos. heavy Duty Connector with Cadmium

plated nut and bolt for Anti rusting

The panel shall be supplied with Seven Tank chemical

process which shall be carried out before applying painting,

painted with powder coating. (The rates excludes the cost of

switchgears, busbars, interconnecting mains & Copper /

Aluminium strip, fuse, meters etc. The dimension shall be

measured excluding base beams) The standard companies

switch gear shall be used and only manufacturers at CPRI

approved factory as per IEC 61439 and shall be certified by

that company whose switch gears are used after fabrication

for beneficial use. With 350 mm depth

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

The panel shall be supplied with Seven Tank chemical

process which shall be carried out before applying painting,

painted with powder coating. (The rates excludes the cost of

switchgears, busbars, interconnecting mains & Copper /

Aluminium strip, fuse, meters etc. The dimension shall be

measured excluding base beams) The standard companies

switch gear shall be used and only manufacturers at CPRI

approved factory as per IEC 61439 and shall be certified by

that company whose switch gears are used after fabrication

for beneficial use. With 350 mm depth Panel manufacturer

have to give 3 years maintenance and service support if in

case of breakdown or fault. Panel manufacturer have to

submit electrical meter calibration report. Agency should

design the panel in such a way that there should not be any

excess in panel area (sq.mtr) & length of bus-bar (mtr), if

any excess occurs draw attention to GSPHCL at the time of

approval of G.A. drawing.

Loading and unloading of above item shall be done by

hydra and skill work force under supervision of electrical

engineer and guidelines given by manufacturer to avoid

damage to the item. Picture of it to be submitted in running

bill / final bill.

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

Size of door and Ele. room / Pump room shall be checked

by agency's engineer before giving order. If found any

problem in size discuss with GSPHCL engineer for

rectification before giving order. [Including Necessary

numbering / marking on PANEL done with red colour radium

sticker as per site requirement and instructions given by EIC

on site. Font / number size given by EIC on site as per

requirement] (All Panel as per IEC 61439 as per NBC

Guideline) [Manufacturer must be of Gujarat state so three

stage inspection can be done]

166 Providing & erecting Approved make Four pole moulded 1.00 Each 6112.00 Rupees Six Thousand

case circuit breaker having breaking capacity ICU of 25 One Hundred Twelve

K.A. at 415 V. having normal current rating 63 to 100 A. Only

with variable/Fixed thermal & magnetic release suitable to

work on A.C. supply 50 c/s. with all internal connections,

spreader tinned copper & complete erected in existing

G.M.S. housing. ICS=100% ICU Only

167 Supplying & Erecting Approved Make Extended operating 1.00 Each 865.00 Rupees Eight

rotary handle with pad lock with three position Trip, Off, On Hundred Sixty Five

suitable for 25 Amp. to 250 Amp. panel mounting. Only

(Company Must be same company of switchgear)

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

168 Supplying and erecting tripple pole & neutral 440V / 500 V 1.00 Rn.Mtr 1942.00 Rupees One

Panel mounting Copper Busbars with four equal Nos. of Thousand Nine

electrolyte bus having current density not more than 1.6 Hundred Forty Two

Amp. / sq.mm (Rated current / cross section area) duly Only

wraped with colour insulating tape for phase sequence of

following current carrying capacity, erected with necessary

bus bar supports / insulators, main cable socket to each

bar, erected in existing cubical panel with necessary

connections.For electrolyte copper Busbars Suitable for

100 Amp. capacity

169 Supplying and erecting KITKAT pattern porcelain cutout 3.00 Each 416.00 Rupees Four Hundred

with base of following current capacity erected on existing Sixteen Only

block board. [vi] 200 A. 500 V.

170 Approved make Earth fault Relay suitable to mount with 1.00 Each 4934.00 Rupees Four

inter connection to moulded case circuit breaker having CT Thousand Nine

ratio & MCCB rating as following along with shunt trip 220 V Hundred Thirty Four

AC with all internal connections & complete erected in Only

existing M.S.housing. 15 A -100 A, CT Ratio 1/100 [make

and model approved by EIC strictly as per tender

171 Supplying and erecting approved make panel mounting type 1.00 Each 1263.00 Rupees One

Digital Voltmeter having 3 x 1/2 digits LED display, 0 to Thousand Two

750 AC Volts range having 0.5 class accuracy, erected on Hundred Sixty Three

existing panel board with all connection, wiring etc. with Only

manufacturers calibration certificate. [Make and model

approved by EIC as per specification]

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

172 Supplying and erecting approved make panel mounting type 1.00 Each 1543.00 Rupees One

Digital Ammeter having 3 digits LED display, external CT Thousand Five

operated, calibrated for 0 to 1000 Amps. suitable to operate Hundred Forty Three

on 500 Volt AC, 0.5 class accuracy,erected on existing Only

panel board with all connection, wiring etc. with

manufacturers calibration certificate. [Make and model

approved by EIC as per specification]

173 Supplying and erecting Ammeter / Voltmeter selector 2.00 Each 314.00 Rupees Three

switch for 3 phase AC Supply 500 V on existing panel Hundred Fourteen

board with necessary connections. [Make and model Only

approved by EIC as per specification]

174 Supplying and erecting approved make suitable panel 3.00 Each 43.00 Rupees Forty Three

indicator LED type lamp, lens cover, complete erected Only

with necessary connections.

175 Providing and Erecting of Miniature circuit breaker single 6.00 Each 111.00 Rupees One Hundred

pole 6 Amp. to 25 Amp. suitable to operate on 240 V A.C. Eleven Only

system and having breaking capacity 10 KA to be erected in

existing MS box confirming to IS 8828/1996 with ISI Mark.

176 Providing & erecting L.T. Current Transformer with bar 3.00 Each 272.00 Rupees Two Hundred

primary 50/5 to 1000/5 ratio 15 VA burden having 0.5 class Seventy Two Only

accuracy erected in Class existing CRCA box duly secured

with insulating materials connected to the meter [Make and

model approved by EIC as per specification]

177 Providing & erecting 240 V MCB Double pole switch for 9.00 Each 327.00 Rupees Three

Motor and inductive load (C curve) having 10 KA breaking Hundred Twenty

capacity & confirms to IS:8828 in Existing M.S. box having Seven Only

following capacity. For 40 Amp.

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

178 Providing & erecting 415 V MCB Four Pole for Motor & 1.00 Each 730.00 Rupees Seven

[a] Inductive Load (C Curve) having 10KA breaking capacity & Hundred Thirty Only

confirms to IS:8828 in existing MS box having following

capacity. For 63 Amp.

178 Providing & erecting 415 V MCB Four Pole for Motor & 1.00 Each 662.00 Rupees Six Hundred

[b] Inductive Load (C Curve) having 10KA breaking capacity & Sixty Two Only

confirms to IS :8828 with same company metal box with

earthing terminal having following capacity with necessary

numbering/marking with oil paint by painter. For 40 Amp.

179 Supplying & fixing box for housing RCCB + MCB 9.00 Each 272.00 Rupees Two Hundred

[a] combination made of 18 SWG sheet steel duly powder Seventy Two Only

coated with gasket, dust & vermin proof bakelite shield two

earthing terminals for following type of RCCB, RCCB + MCB

[a] For 2 pole [Same company metal box used as MCB /

ELCB used with earthing terminal with necessary

Numbering / marking with oil Paint by painter]

179 For 4 pole [Same company metal box used as MCB / 2.00 Each 442.00 Rupees Four Hundred

[b] ELCB used with earthing terminal with necessary Forty Two Only

Numbering / marking with oil Paint by painter]

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

180 Providing ad erecting approved make single phase Double 1.00 Each 5868.00 Rupees Five

Door metal clad D.B. as per relevant indian standards Thousand Eight

ammended upto date. Hundred Sixty Eight

Supplying and fixing following way single phase MCB Only

distrubution board of company fabricated sheet box with

powder coated inside and outside after apply seven tank

chemical process of CRCA sheet cover complete with

suitable integral single piece construction tinned copper

busbar and link with all necessary interconnection and with

necessary size MS frame for mounting MCBDB. MCBDB

Door, Back side and Body of MCBDB must be made of

mm thick CRCA Sheet. Manufacturer must be provided (1)

IP 43 and as per IS:8623-1 & 3, IEC 61439-1 & 3 having D

type PU gasket. (2) Seven tank Powder coating Certificate

(3) Tinned Copper/Brass make neutral & Earthing link with

isolation & Protecting Cover for 240 Volts on surface /

recess complete with loose wire box, terminal connectors

for all incoming and outgoing circuits, with suitable size

FRLS PVC insulated copper conductor up to terminal blocks

and internal connection, tinned coppper bus bar, 1 no.

tinned copper neutral link, tinned copper earth bar, din bar,

detachable gland plate, interconnections, powder painted

including earthing etc.

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

Single phase incoming and horizontal single phase

outgoing. For 16 Way MCBDB: Including 1 no. 40 Amp.

mA double pole ELCB (ELCB confirming to IS:12640/1988

having sensitivity of 30 mA and breaking capacity of 10 KA),

1 no. MCB 40 Amp. double pole switch (C curve confirms to

IS:8828 having breaking capacity of 10 KA) and S.P. MCB

of rating 6 to 32 Amp. with NL suitable to operate on

Volt A.C. power. (6 Amp:- 4 Nos., 16 Amp:- 4 Nos. &

(The DBs should be used of same company of MCB / ELCB

to be used) (MCBDB must be erected in line & level with

spirit level and finish the external edge with box cutting

plaster) (Same colour MCB(SP/DP) should be used as

same as MCBDB) [Including Necessary numbering /

marking on box done with red colour radium sticker as per

site requirement and instructions given by EIC on site. Font

/ number size given by EIC on site as per requirement]

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

181 Providing ad erecting approved make single phase Double 4.00 Each 4353.00 Rupees Four

Door metal clad D.B. as per relevant indian standards Thousand Three

ammended upto date. Hundred Fifty Three

Supplying and fixing following way single phase MCB Only

distrubution board of company fabricated sheet box with

powder coated inside and outside after apply seven tank

chemical process of CRCA sheet cover complete with

suitable integral single piece construction tinned copper

busbar and link with all necessary interconnection and with

necessary size MS frame for mounting MCBDB. MCBDB

Door, Back side and Body of MCBDB must be made of

mm thick CRCA Sheet. Manufacturer must be provided (1)

IP 43 and as per IS:8623-1 & 3, IEC 61439-1 & 3 having D

type PU gasket. (2) Seven tank Powder coating Certificate

(3) Tinned Copper/Brass make neutral & Earthing link with

isolation & Protecting Cover for 240 Volts on surface /

recess complete with loose wire box, terminal connectors

for all incoming and outgoing circuits, with suitable size

FRLS PVC insulated copper conductor up to terminal blocks

and internal connection, tinned coppper bus bar, 1 no.

tinned copper neutral link, tinned copper earth bar, din bar,

detachable gland plate, interconnections, powder painted

including earthing etc.

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

Single phase incoming and horizontal single phase

outgoing. For 8 Way MCBDB: Including 1 no. 40 Amp.

mA double pole ELCB (ELCB confirming to IS:12640/1988

having sensitivity of 30 mA and breaking capacity of 10 KA),

1 no. MCB 40 Amp. double pole switch (C curve confirms to

IS:8828 having breaking capacity of 10 KA) and S.P. MCB

of rating 6 to 32 Amp. with NL suitable to operate on

Volt A.C. power. (6 Amp to 25 Amp: 4 Nos.)

(The DBs should be used of same company of MCB / ELCB

to be used) (MCBDB must be erected in line & level with

spirit level and finish the external edge with box cutting

plaster) (Same colour MCB(SP/DP) should be used as

same as MCBDB) [Including Necessary numbering /

marking on box done with red colour radium sticker as per

site requirement and instructions given by EIC on site. Font

/ number size given by EIC on site as per requirement]

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

182 Providing ad erecting approved make three phase Double 1.00 Each 4055.00 Rupees Four

Door Horizontal / Vertical type (as per site requirement Thousand Fifty Five

and EIC instruction) outgoing per phase outgoing type Only

(PPI) metal clad D.B. as per relevant Indian standards

amended up to date. Supplying and fixing following way

Three phase MCB distribution board with company wire

links for internal connections having colour code and with

suitable lugs and company fabricated with sheet box with

powder coated inside and outside after apply seven tank

chemical process of CRCA sheet cover complete with

suitable integral single piece construction, tinned copper

busbar and link with all necessary interconnection and with

necessary size GI frame (if required for surface type) for

mounting MCBDB. MCBDB door, Back side and Body of

MCBDB must be made of 1.2 mm thick CRCA Sheet.

Manufacturer must be provided (1) IP 43 and as per

IS:8623-1 & 3, IEC 61439-1 & 3 having D type PU gasket.

(2) Seven tank Powder coating Certificate

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

(3) Tinned Copper/Brass make neutral & Earthing link with

isolation & Protecting Cover for 440 Volts on surface /

recess complete with loose wire box, terminal connectors

for all incoming and outgoing circuits, with suitable size

FRLS PVC 10 mm2 insulated copper conductor with Pin

type lug up to terminal blocks and internal connection,

tinned copper bus bar, 4 nos. tinned copper neutral link,

nos. tinned copper earth bar, din bar-4 nos., detachable

gland plate, interconnections, including earthing etc. Three

phase incoming and single phase outgoing. Total quantity of

wire link: 13 Nos.

For Three phase 6 Way Double Door PPI MCBDB (The

DBs should be used of same company of MCB / ELCB to

be used) (MCBDB must be erected in line & level with spirit

level and finish the external edge with box cutting plaster)

(Same colour MCB(SP/DP) should be used as same as

MCBDB) [Including Necessary numbering / marking on box

done with red colour radium sticker as per site requirement

and instructions given by EIC on site. Font / number size

given by EIC on site as per requirement]

183 Providing and Erecting Approved make ISI mark ELCB 8.00 Each 2213.00 Rupees Two

confirming to IS:12640/1988 having serial number printed Thousand Two

on it and having sensitivity of 30 mA and breaking capacity Hundred Thirteen

of 10 KA and suitable for 240 V, 50 Hz having characteristic Only

of quick acting & Tripping with all advance feature & do not

incorporate any electronic component (mounted in MCBDB)

Suitable for operation on single phase 240 Volt max rating

of (i) For 40 Amp. DP.

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

184 Providing and Erecting of Approved make ISI mark ELCB 1.00 Each 3010.00 Rupees Three

confirming to IS:12640/1988 having sensitivity of 30 mA. Thousand Ten Only

and breaking capacity of 10 KA and suitable for 440 V

having characteristic of quick acting & Tripping with all

advance feature & do not incorporate any electronic

component for following Max. rating erected as directed in

Existing M.S. box having following capacity. (iii) For

185 Providing & erecting 240 V MCB Double pole switch for 1.00 Each 297.00 Rupees Two Hundred

Lighting load (C curve) having 10 KA breaking capacity & Ninety Seven Only

confirms to IS:8828 in Existing M.S. box having following

capacity. For 6 to 32 Amp.

186 Supplying & erecting 12 mm thick backelite sheet of 2.50 Sq. Mtr. 2289.00 Rupees Two

approved make and grade on 25 x 25 x 3 mm red oxide Thousand Two

painted angle iron frame suitable for fixing ICDP SWITCH Hundred Eighty Nine

and energy meter (contractor shall make approved drawing Only

of Bakelite sheet To arrange required No. of Energy meter &

ICDP switch-busbar etc. as per Actual space available in

electrical room at site)

187 Providing and erecting Steel cover as per drawing using 18 5.00 Sq. Mtr. 2976.00 Rupees Two

SWG M.S.sheet of following depth, to house the switchgear Thousand Nine

etc. complete with locking arrangement and lock with Hundred Seventy Six

duplicate keys per cupboard and door handles erected with Only

necessary support and painting. Without angle iron frame.

For 40 cms. depth

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

188 Providing, erecting, fabricating the M.S. structure as per 50.00 Kg. 75.11 Rupees Seventy Five

requirement of site as per structure design Including And Paise Eleven

proper size approved by EIC of M.S. angles, flats, bars, Only

square pipe, channels, sections (Tata, Jindal, Asian, JSI

Make) complete with cutting, welding, grinding and finishing

duly painted with Asian/Nerolac make premium quality oil

paint and true care red oxide metal primer,asian paint make

with erection on site as per direction of engineer in charge

with necessary grouting cementing, plastering and finishing

complete. All hole opening of square pipe end must be

closed with M.S plate welding. Payment will be done on KG

as per Actual weight.

189 Providing and erecting metalic danger notice board for 5.00 Each 69.00 Rupees Sixty Nine

MEDIUM VOLTAGE installation to be erected as per I.S. Only

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

190 Supplying and erecting approved make GRP / FRP 40.00 Rn. Mtr. 526.00 Rupees Five Hundred

[a] Perforated type Cable Tray Twenty Six Only

Material – Corrosion Resistant Polyester Flame Retardant

U.V. Stabilized Resin System - Manufactured from

Pultruded Sections- Polyester Resin System, Glass Content

: 55 – 60 % - - Standard Length : 3000mm- Support Span –

1500mm, Deflection L/200 - Specification NEMA FG1 1993-

UV Resistant - Flame Retardant – IS 6746 - Appendix K/UL

94, Very Low Flammability - Specification Followed NEMA

Oxygen Index – Minimum 30% as per ASTM D 2863 -

Flame Spread (Extent of Burning) – 20mm as per Standard

ASTM D 635 - Tensile Strength – 4000 – 8000 Kg/Cm2 as

per Standard ASTM D 638 - Flexural Strength – 2500 –

10000 Kg/Cm2 as per Standard, ASTM D 790- Izod Impact

Strength – 130 Kg/Cm2 as per Standard ASTM D 256-

Compressive Strength – 2500 – 5000 Kg/Cm2 as per

Standard ASTM D 695- Barcol Hardness – 50 – 65. (F)

Width - 300mm, Pultruded “C” Channel with 50mm

Sides 4mm Thickness, Loading 30 Kg./Mtr.

190 (D) Width - 150mm, Pultruded “C” Channel with 30mm 40.00 Rn. Mtr. 230.00 Rupees Two Hundred

[b] Sides 3mm Thickness, Loading 15 Kg./Mtr. Thirty Only

191 Supplying and laying UPVC cable trunking system 20.00 Mtr. 275.00 Rupees Two Hundred

[a] comprising unplasticised polyvinyl, chloride rigid material Seventy Five Only

with ignition free & flame proof confirming BS .All necessary

accessories and measuring of following sizes. [1] 75 mm x

50 mm trunking.[MK, LEGRAND, OBBO make Only]

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

191 100 mm x 50 mm trunking.[MK, LEGRAND, OBBO make 20.00 Mtr. 424.00 Rupees Four Hundred

[b] Only] Twenty Four Only

192 Providing & erecting Switch board for Computer or 1.00 Each 1122.00 Rupees One

electric apparatus consisting of following items in single Thousand One

board erected on Metal board with 3 mm thick PC Hundred Twenty Two

(Polycarbonet) / Acrylic sheet erected as directed. 2 no. Only

6/16 Amp. universal Socket, 2 nos. 16 Amp. indicator

switch, 2 nos. 6 Amp. Switch & 2 nos. 6 Amp. 5 pin

Plug. For Computer power Supply board. Cat.-III

193 SITC of specified make X color for Cat.-6 Data and Y 110.00 Mtr. 47.00 Rupees Forty Seven

color for Cat.-6 voice cable to be done in prelaid PVC pipe Only

/ raceway, but without the cost of raceway or pipe (the wire

is to be drawn from MFD/ JB to outlet point) (a) CAT -

(For Computer Cabling and For Voice Cabeling)(Molex,

R&M, Avaya, Systimax, Legrand make Only)

194 Providing & erecting following type of Modular Type 1.00 Each 159.00 Rupees One Hundred

Accessories mounted with 20 G G.I. Company Fabricated Fifty Nine Only

metalic box, single mounting base frame covered with

textured / metallic front plate, modules erected with

necessary connection. As desired by Engineer in charge.

Modem Jack for Computer Open RJ-45 CAT-III

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

195 Providing & erecting following type of Modular Type 7.00 Each 159.00 Rupees One Hundred

Accessories mounted with 20 G G.I. Company Fabricated Fifty Nine Only

metalic box, single mounting base frame covered with

textured / metallic front plate, modules erected with

necessary connection. As desired by Engineer in charge.

(a) RJ-11Telephone Socket CAT-III

196 Supplying and erecting approved make Octagonal pole 4.00 Each 6917.00 Rupees Six Thousand

made from HR sheet steel. The pole should be made as Nine Hundred

per IS. and shall be coated with hot dip galvanizing as per Seventeen Only

IS 2629/2633/4759, suitable suspend local wind speed with

integral Junction box with Hot Deep Galvanised door

having 2 nos. 180° operated hinges & 2 nos. Ln key

locking with silicon rubber gasket. Consist of terminal

plate of min 6mm Hylam sheet, standard profile 35 mm

X 7.5 mm Din-Rail & MCB, Brass stud type terminal and

arrangement for cable termination to be erected on RCC

foundation as per details given by manufacturer and EIC

considering site requirement.

Foundation Details: (1) Grade of RCC 1:2:4, (2) Grade of

steel rainforcement of RCC FE 415, (3) Clear cover to

rainforcement 50mm, (4) Concrete vibrated, (5) use

suttering / farma, (6) Hot deep galvanized average

Micron, (7) Detail drawing will be given by corporation

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

(C) 5 Mtr. Long 70 mm Top X 130 mm bottom dia, 3 mm

thickness with 200 mm X 200 mm X 12 mm base plate, 4-

M16 Bolts and 600 mm long hot deep galvanized J-Bolt,

nuts, washers with 800 mm under ground and 200 mm

above ground level and Foundation in 1:2:4 proportion as

per details given by manufacturer and EIC considering site

requirement. Approx Pole weight 46 kg.

197 Coil type earthing, coil made from 8 SWG galvanised iron 4.00 Each 368.66 Rupees Three

wire with 50 mm OD and 50 turns (length of turns approx. Hundred Sixty Eight

200 mm) and having additional continuous streight length of And Paise Sixty Six

3.00 mtr at open end and should be connected to earthing Only

bolt and burried in 1.5 mtr deep specially prepared earth pit

complete with salt and charcoal/coke as required for coil

type earthing.(Approx weight of coil 1.0 to 1.1 Kgs)

198 Supplying and erecting Fabricating terminal box for street 5.00 Each 702.00 Rupees Seven

light pole made from 16 SWG M.S. sheet having following Hundred Two Only

size complete with fixing arrangement for terminal board,

with necessary hole for wire entry and exit from the box.

The box shall be provided with cover and hinges on one

side and bolting at other end The box shall be fixed by

clamps fabricated from 25mm x 6mm flat.The box shall be

painted with one coat of red oxide and two coats of paint

having following box size 330 mm x 260 mm x 140 mm

(depth). Providing and fixing Terminal board of size 5.0 x

127 x 152.4 mm.bakelite sheet with 15 Amp. kitkat pattern

porcelain fuse unit with suitable brass studs with nuts,

washers and clamps of size 25 mm x 3 mm suitable for pole

painted with one coat of red lead paint.

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

199 Providing & erecting bracket consisting of ISI mark "B" class 4.00 Each 487.00 Rupees Four Hundred

G.I. Pipe 4.2 cm outside diameter complete with suitable Eighty Seven Only

G.I. Sleeve tubing of 2 mm. thick and required size and

length suitable for 76.5 / 80 mm. required size of pole top or

pipe in pipe surface for terrace as per instruction of EIC or

wall bracket as per instruction of EIC having nuts and bolts

for fixing the brackets and having spread of Upto 0.50 mtr.

length with suitable rise as per site condition and suitable

welded stiffner reducer and nipple with check nut complete

painted with one coat of yellow zinc and two coats of

alluminium paint for Single arm bracket suitable for pole or

terrace as per design given by EIC (a) For single arm

bracket. (Jindal / Asian / Tata / Surya Prakash make Only)

(Fabricators:- Bajaj, Valmont, Transrail, Ambica Only) (Test

certificate to be submitted)

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

200 For Wall & Terrace Street light Bracket:Providing and Fixing 6.00 Each 487.00 Rupees Four Hundred

of wall and terrace bracket consisting of ISI mark "B" class Eighty Seven Only

G.I. Pipe 4.2 cm outside diameter and length suitable for

building face for fixing the brackets and having spread of

Upto 0.70 mtr. length with suitable degree angle as per site

situation suggested by EIC. vertical plane and suitable

welded stiffner reducer and nipple with check nut complete

painted with one coat of red oxide and two coats of

alluminium paint (Zinc Coating before alluminium Paint is

mandatory)with . complete with 150*150*2mm thick G.I

plate with 4no heavy duty galvanized jasti khila of required

size or Single arm bracket (pipe in pipe type) suitable for

terrace as per design given by EIC Considering parfait,

height ,width and total height of building and type of led

fitting . (a) For single arm bracket

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

201 Providing and Fixing SITC of Outdoor aesthetically 10.00 Each 3512.00 Rupees Three

designed LED Street Light Luminaire with total Thousand Five

consumption of Max. 45 W with single piece die cast Hundred Twelve Only

aluminium housing, high power LED shall be mounted on

high quality metal core PCB with extremely precison

designed heat sink complete with IP66 protection Class with

polycarbonate / thoughened glass cover the fixture should

be suitable for pole/bracket mounting. The fixture to comply

both LM79 and LM 80 guidelines with LED module min.

LED wattage of 3W& above 130 lumen/watt with toughen

Glass L70 at 50,000 hrs, provided with high quality

polycarbonate lenses for better light distribution. the watt

capacity of each LED must be >= 4watt in fitting The Fixture

Should be able to be Pole Mounted and also bracket

mounted, provided with high quality driver for protection

against high and low Voltage cut Off, opertional for high

amibient and high humid envirnoments, THD of driver

should be less than 10% and P.F > 0.95. Also the Fixture

should meet the following technical criterias Oprating range

Voltage 160 to 270 V, system efficiency >= 110 lm/w, and

total lumens not less then 4950, CCT > 5000K, CRI >

beam angle 120 deg, surge immunity level 4 kv integral &

10 kv non-integral

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

The Separate Potted driver should have over current, over

voltage protection, short circuit protection so that the fixture

recovers once the fault is removed. In addition to the above

product should be operational in the temperature range of

deg to 50 deg and humidity range of 10% to 90%

RH.(Stricly sample approved by EIC subject to tender

specification) (Note:- The manufacturer/authorized Channel

partner of the manufacturer has to submit 5 yrs free

replcement Guarantee for complete Fixture)(Cool White

Color/warm white/natural white (approved by engineer

202 Supplying following size of Light duty “A” Class G.I. Pipe 15.00 Mtr. 171.00 Rupees One Hundred

& erecting as directed by Engineer-in-charge. For 25 mm Seventy One Only

203 Providing & Erecting Flexible PVC insulated multistrand 25.00 Mtr. 46.00 Rupees Forty Six

multicore 1.1 kv grade ISI marked copper wires of Only

following size to be erected as directed. 3 core 1.5 sq.mm.

PVC insulated round copper wire ISI mark.

204 Providing & erecting XLPE (IS : 7098) (I)-88 ISI marked 250.00 Mtr. 361.00 Rupees Three

[a] armoured Copper cable for 1100 volt to be laid 90 cms. Hundred Sixty One

Under ground or to be laid on wall with suitable G.I. heavy Only

guage 1.0 mm thick cable clamp or in existing DWC pipe

underground or road crossing or floor of following size of

cables. [a-1] For 4 core x 4 sq.mm.

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

204 Providing & erecting XLPE (IS : 7098) (I)-88 ISI marked 135.00 Mtr. 269.00 Rupees Two Hundred

[b] armoured Copper cable for 1100 volt to be laid 90 cms. Sixty Nine Only

Under ground or to be laid on wall with suitable G.I. heavy

guage 1.0 mm thick cable clamp or in existing DWC pipe

underground or road crossing or floor of following size of

cables. [a-1] For 4 core x 2.5 sq.mm.

205 Providing & laying HDPE Double walled corrugated pipes 310.00 Mtr. 117.00 Rupees One Hundred

(DWC) (conforming to IS: 16205 (part 24) 2018)) with Seventeen Only

minimum load required of 450N capacity with anti rodent

and ultra violet material properties with necessary

connecting accessories of same material at required depth

to be laid 90 cms. under ground for laying of cable below

ground / road surface for enclosing cable and back filling

the same to make ground as per original. (A) For Outer

dia. 50 mm and Inner dia. 38 mm. (Test Certificate to be

206 Providing & fixing double compressed heavy duty flange 22.00 Each 43.00 Rupees Forty Three

type brass cable gland with rubber ring for P V C insulated Only

armoured cable complete with outgoing tails, insulating tape

etc. For following size cables. For 2 to 4 core x 4.0 Sq. mm

(Sigma ,MCI,Comet Make)

207 Providing & fixing Solderless crimping type Copper lugs 50.00 Each 8.00 Rupees Eight Only

conforming to IS suitable for cable of following size evenly

crimped with high pressure tool & connected to switchgear

terminals with brass/cadmium plated nut bolts in an

approved manner. [a] 1.5/2.5 to 6 Sq.mm

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

208 Providing and Laying of Mains with ISI marked, 1.1 KV 50.00 Mtr. 56.00 Rupees Fifty Six Only

grade electrolyte multi stranded, annealed copper conductor

with heat resistant PVC insulated conforms to IS:694, IEC -

227 erected in existing pipe of following size (Specifically

for control panel, relays, power switchgears, motor starters

& control wiring) with required size of copper lugs, nuts and

bolts if required. [f] One wire 6.00 sq. mm

209 Providing and Laying of Mains with ISI marked, 1.1 KV 50.00 Mtr. 91.00 Rupees Ninety One

grade electrolyte multi stranded, annealed copper conductor Only

with heat resistant PVC insulated conforms to IS:694, IEC -

227 erected in existing pipe of following size (Specifically

for control panel, relays, power switchgears, motor starters

& control wiring) with required size of copper lugs, nuts and

bolts if required. [f] One wire 10.00 sq. mm

210 Providing and Laying of Mains with ISI marked, 1.1 KV 170.00 Mtr. 141.00 Rupees One Hundred

grade electrolyte multi stranded, annealed copper conductor Forty One Only

with heat resistant PVC insulated conforms to IS:694, IEC -

227 erected in existing pipe of following size (Specifically

for control panel, relays, power switchgears, motor starters

& control wiring) with required size of copper lugs, nuts and

bolts if required. [g] One wire 16.00 sq. mm

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

211 Providing and laying Mains with ISI marked, 1.1 KV grade 60.00 Mtr. 17.00 Rupees Seventeen

electrolyte multi stranded, annealed copper conductor with Only

heat resistant PVC insulated conforms to IS:694, IEC -

erected in existing pipe of following size (Specifically for

control panel, relays, power switchgears, motor starters &

control wiring) with required size of copper lugs, nuts and

bolts if required. For One wire 1.50 sq. mm

212 Providing & Erecting Universal Astro 5 KVA intelligent 3.00 Each 12895.00 Rupees Twelve

streetlight control system insu with weather proof box for Thousand Eight

outdoor application. (As per specification attached Hundred Ninety Five

separately) (Make and model approved by EIC) Only

213 Supplying & erecting IP 55 grade following size section 2.00 Each 1866.00 Rupees One

pillar fabricated from joint less M.S. Sheet with angle iron Thousand Eight

legs made from jointless M.S. Angle with cable clamps to be Hundred Sixty Six

buried in ground to have appropriate erection to work Only

uniform until erected with cement concrete foundation and

45 cm high bricks work finishing with plaster etc. hinged

double door internally supported on both side,

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

with internal and outside looking arrangement with look and

keys in duplicate 35 x 35 x 5 mm M.S. Angle of Two Nos.

one is welded and other with nut and bolt for erecting

Bakelite sheet. Painting the Section Pillar inside and out

side with three tank powder coated paint. section pillar roof

should be without joint with water leakage proof & tested as

per IP 55 test & followed by IS 2147 of 1962(C) 60 X 30 X

45 cm section pillar fabricated from 16 Gauge MS Sheet

with angle iron legs 45 cm long made from 35 X 35 X

mm thick MS angle.

214 Supplying & erecting approved make SMC press moulded 11.00 each 295.00 Rupees Two Hundred

composite FRP. loop-in, loop-out approx. 2mm thick box Ninety Five Only

complete with Bakelite connector strip 5way(3P+N+E),DIN

rail for mounting mob & hinged doors as per requirement

having locking arrangements with mounting clamp with nuts,

bolts & washers suitable for erection on pole with cable

clamps& earth bolt of following size of box.140mm x 140mm

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

215 Supplying, installation, testing and commissioning of 1.00 Each 35923.00 Rupees Thirty Five

electric driven Booster pump with automatic operation Thousand Nine

and consisting of following, complete in all respects, as Hundred Twenty

required: (Terrace Pump) Three Only

(a) End Suction Of cast iron body & CI impeller with

stainless steel shaft, mechanical confirming to IS :

(b) 10 HP squirell cage induction motor TEFC type suitable

for operation on 415 volts, 3 phase, 50 Hz, AC supply with

IP55 class of protection for enclosure, horiziontal foot

mounted type with Class-'F' insulation, conforming to IS-

(c) Including Cost Of M.S.fabricated common base plate,

coupling, coupling guard, foundation bolts etc.as required.

(d) Suitable cement concrete foundation duly plastered and

with anti vibration pads.

900 lpm at 35 m Head. (Make: Lubi,Kirloskar, Willo)

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

216 Supplying & erecting approved make motor control 1.00 Each 7646.00 Rupees Seven

cubical panel (Direct-on- line) made from 16 G. CRCA Thousand Six

sheet duly epoxy powder painted inside and outside with Hundred Forty Six

hinged doors and locking, arrangement consisting of Only

suitable size of ON- OFF isolator (AC - 3/23duty) main

fuses, single phasing preventer, indicating lamps for R- Y -

B phases, overload relay, Automatic water level controller,

Ammeter, Voltmeter each with two way selector switch

incoming, wires duly socket crimped, main contactor &

overload relay, start - stop push buttons, to be erected on

angle iron frame grouted on wall as directed. The isolator,

overload relay & contactors will be of L&T, Siemens or BCH

make only. (a) As per suitable size as per terrace pump

KW / HP rating and relay and contactor rating as per full

load current rating of Terrace pump [Provision for

terrace pump] [The panel must be suitable for ON-OFF

switch contacts with suitable capacity contactors and

required accessories in panel]

217 Providing and fixing of Dial type Pressure Gauge having 2.00 Each 1539.46 Rupees One

100 mm dial & range of 0-14 Kg/cm2 with isolation ball Thousand Five

valve. (Make:- Hguru, Fiebig or equivalent make and model Hundred Thirty Nine

approved by EIC as per specification) (Test certificate must And Paise Forty Six

be submitted) Only

218 Providing & fixing of pressure switch in M.S. pipe line 2.00 Each 1310.00 Rupees One

including connection etc. as required. (Indfos, Danfoss or Thousand Three

equivalent Approved ISI make & model approved by EIC) Hundred Ten Only

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

219 Supplying and fixing air vessel (pressure vessel) made of 1.00 Each 15461.00 Rupees Fifteen

250 mm dia, 8 mm thick MS sheet, 1200 mm in height with Thousand Four

air release valve on top and flanged connection to riser, Hundred Sixty One

drain arrangement with 25 mm dia gun metal wheel valve Only

with required accessories, pressure gauge and painting with

synthetic enamel paint of approved shade as required.

(Approved ISI make & model approved by EIC)

220 Supplying, installation, testing and commissioning of On/Off 2.00 Each 890.00 Rupees Eight

switch with all require. [ASES or equivalent make and Hundred Ninety Only

model approved by EIC as per specification) [Test certificate

must be submitted]

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

221 Providing and fixing of ABC Type Store Pressure Fire 10.00 Each 1991.00 Rupees One

Extinguisher Having capacity 6 kg Filled with Mono Thousand Nine

Ammonium Phosphate Powder 50% confirms to IS 4308, Hundred Ninety One

Stored Pressure Type, UGTS Pressure Gauge, Can Height Only

530 mm, Diameter 150 ± 10mm, Discharge Time 24 Sec,

Controllable discharge mechanism, Jet Range 5 Meters,

Average Discharge is 92%, applicable on Class A,B & C

and electrically started Fire, Fire Rating 4A:144B, Can

Construction : Deep drawn & CO2 Mig welded,

EPDM(Ethylene Propylene Diene Monomer) Rubber

Hose with both end Aluminum clamped, Internal Coating -

Epoxy Powder coating, External Coating - Pure

Polyester Powder coating (UV Resistant),Brass forged

CE Marked valves with NRV & Auto Safety Release with

safety Pin is of SS material, Made up from 1.6mm thick

sheet, Extinguishers confirmed to IS 15683:2018 and ISI

marked. Referance Weight:-Gross Weight 8.9 Kg, Empty

Weight 2.9 Kg, 1. Necessary certificate & and guarantee

must be attached, 2. OEM has to provide wall mounting

heavy duty bracket/clamp, screw, hardware for installation.

3.Following printed marking Manufacturing Date and Expiry

Date must be mention on Extinguisher 4. Refilling period

must be of 3 Years.

Following Printed marking on equipment must be required:-

Model No, Capacity, Gross Weight, Content, Fire Rating,

Batch No, Serial no, Mfg Month, Refilling Due. [with

necessary numbering / marking with oil paint by painter as

instructions given by G.S.P.H.C.L engineer] (Make:

KANEX, MINIMAX, CEASEFIRE)

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

222 Providing and fixing of CO2 type High Pressure Portable 10.00 Each 6526.00 Rupees Six Thousand

4.5 kg Fire Extinguisher, filled with Co2 Gas as per IS Five Hundred Twenty

15222, Control discharge mechanism fitted with 1 Meter Six Only

Wire Braided Hose & Electrical non-conductor Polyethylene

Flat Horn with Diffuser Nozzle for dispersed discharge of

CO2, Discharge Time 12 Sec, Average Discharge is 95%,

Applicable on Class B, C and electrically started Fire, Fire

Rating 55B, Internal coating is not applicable & External

coating is of enamel spray painting, Powder Coated Handle,

Valve Confirm to IS 3224 ISI Marked, CO2 Cylinder

construction: hot spinning by seamless pipes & bearing ISI

mark, Body confirms to IS 7285 and PESO ( Petroleum and

Explosives Safety Organization) APPROVED, Minimum

Wall Thickness 4 to 4.2 mm, Extinguishers confirmed to IS

15683:2018 and ISI marked. Referance Weight:-Gross

Weight 16.4, empty weight 11.9 Kg, 1. Necessary

certificate & and guarantee must be attached, 2. OEM has

to provide wall mounting heavy duty bracket/clamp, screw,

hardware for installation. 3.Following printed marking

Manufacturing Date and Expiry Date must be mention on

Extinguisher 4. Refilling period must be of 5 Years.

Following Printed marking on equipment must be required:-

Model No, Capacity, Gross Weight, Content, Fire Rating,

Batch No, Serial no, Mfg Month, Refilling Due. [with

necessary numbering / marking with oil paint by painter as

instructions given by G.S.P.H.C.L engineer] (Make:

KANEX, MINIMAX, CEASEFIRE)

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

223 Providing and fixing of Automatic type 5 kg Fire 2.00 Each 5240.00 Rupees Five

Extinguishers Mono Ammonium Phosphate powder 50% Thousand Two

Confirms to IS 4308, Applicable fire classes A,B & C, UGTS Hundred Forty Only

Pressure Gauge, Can Height 370mm, Diameter 230 ±

10mm, Made up from 2 mm thick sheet, Body

Construction Deep Drawn with MIG Welding technology,

Brass forged sprinkler valves with Nozzle is specially

designed to give more than 99% discharge. Together with

orifice characteristic to cover adequately fire risks with

scattering cone of 40 to 45° Angle. External Pure polyester

(UV resistant) and Internal Epoxy polyester powder coated,

Heat Sensitive Glass bulb of 68 °C. Area covered will be 2-

2.5 m2 and volume of coverage is 7 m3. Referance Weight:-

Empty Weight 2.64 kg, Full weight 7.64 kg, 1. Necessary

certificate & and guarantee must be attached, 2. OEM has

to provide heavy duty wall/ Ceiling mounting Bracket/

clamp, screw, hardware for installation. 3.Following printed

marking Manufacturing Date and Expiry Date must be

mention on Extinguisher 4. Refilling period must be of

Years. Following Printed marking on equipment must be

required:- Model No, Capacity, Gross Weight, Content, Fire

Rating, Batch No, Serial no, Mfg Month, Refilling Due. [with

necessary numbering / marking with oil paint by painter as

instructions given by G.S.P.H.C.L engineer] (Make:

KANEX, MINIMAX, CEASEFIRE)

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

224 Executing comprehensive (All-in-All) service & maintenance 1.00 Job 3991.00 Rupees Three

with spare parts as per terms & condition of tender for Fire Thousand Nine

Extinguisher, tarrace Pump with fire hydrant agency for Hundred Ninety One

defect liability period and copy of this contract will be Only

submitted before final bill. Agency has to quote rate

accordingly. Agency has to also provide the fitness

certificate from system agency and submit to G.S.P.H.C.L.

Agency has to compalsory submit FDR of approved bank

as per clause 2.0, section 3, of Rs.3991.00 + GST or

quoted rate (as per tender premium) whichever is higher

to G.S.P.H.C.L. for minimum maturity period of Four years

in favour of G.S.P.H.C.L., Which will be released after

successful completion of A.M.C. & at the completion of

defect liability period. In any case without submitting FDR

final bill submission not be done.Fire System agency has to

maintain written record of service & maintenance during

defect liability daily period duly sign by police dept. and

submitted regularly to G.S.P.H.C.L. Agency has to give

minimum three services and demonstration per year and

testing and training of entire fire hydrant, sprinkler, fire

alarm, Fire Extinguisher etc. during defect liability period

and obtain necessary certificate from police department and

submitted to G.S.P.H.C.L.

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

Agency has to do maintenance as per terms & condition

alternative in tender. Re-filling Hydraulically pressure for

CO2 and ABC type fire extinguisher if required to get the

N.O.C. from fire department. Agency has to give One live

demonstration of fire Mock drill for fire fighting with minimum

01 no. CO2 and 01 no. ABC type fire extinguisher at the

time of handing over this system to the Police department

and another at the time of releasing final Security deposit.

The necessary certificate / photographs for that must be

225 Providing and erecting Inverter based approved make 1.00 Each 35217.00 Rupees Thirty Five

split air-conditioning unit consisting of condensing unit Thousand Two

with variable speed fan motor, inverter type hermetically Hundred Seventeen

sealed rotary compressor with accessories etc. duly Only

connected separately erected evaporating unit and blower

motor with its accessories by means of proper insulated

copper tubing up to 5 RMT, drain PVC pipes suitable for

(cost includes Eco Friendly green gas charging and 15A

plug top & Remote Control & MS Stand) with necessary

core cutting. For 3 Star Rating of current year [c] for 1 ton

capacity [O-General, Daikin, Mitsuibishi make only] [3

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

226 Extra charges for the item of copper tubing with minimum 19 15.00 Rn.Mtr 956.00 Rupees Nine Hundred

mm thick class 0 nitrile rubber insulation for entire piping Fifty Six Only

system exposed refrigerant piping should be additionally

insulated with factory laminated 200 GSM glass coth for UV

and mechanical protection and manufacturer accomoded

adhesive (solvent free) sealant applied at all joints UV

protection layer. additional layers of UV paint over GC for all

exposed to atmosphere piping for weather protection of

pipes & insulation and prevention of rain waterigress. item

beyond standardlength for single phase / three phase Split

A.C. Machine / Cassate A.C. Machine including power and

control cable up to 4.0 TR capacity.

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

227 Executing comprehensive (All-in-All) service & maintenance 1.00 Each 4530.00 Rupees Four

(Service+ Spare parts) Contract for defect liability period as Thousand Five

per tender items and conditions with AC agency for defect Hundred Thirty Only

liability period and copy of this contract will be submitted

before final bill. Agency has to quote rate accordingly.

Agency has to also provide the fitness certificate from

system agency and submit to G.S.P.H.C.L. Agency has to

COMPALSORY submit FDR of approved bank as per

clause 2.0, section 3, of Rs.4530.00+GST or quoted rate

whichever is higher to G.S.P.H.C.L. for minimum maturity

period of Five years in favour of G.S.P.H.C.L. Which will be

released after successful completion of A.M.C. & at the

completion of defect liability period. In any case without

submitting FDR final bill submission not be done. AC

agency has to provide four [04] servicse per year during

defect liability period and one copy of necessary service

report duly singed by concern police officer and No Defect

Certificate from police department at the time of releasing

Security Deposite will be submitted to EE (Ele.),

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

GSPHCL. Without above Service reports security Deposit of

whole project will not be released. (Agency will have to

submit stability and performance certificate regarding AC

system from authorized dealer/OEM of AC at the time of

final SD release). For delay in rectifing the fault penalty will

be deducted from agency S.D. For 1.0 Ton Split AC

machine. (For 3 years)

G. S. P. H. C. Ltd.