ATA 2026-Painting of FAT Stack,Scrubber ducts etc. in SA Plant of FACT-CD, Ambalamedu.

ATA 2026-Painting of FAT Stack,Scrubber ducts etc. in SA Plant of FACT-CD, Ambalamedu.

Cleaning the structural/ other surface neatly at all heights, manually with suitable tools or with high pressure water jet spray (using suitable mechanical means), and scraping if required, to remove the whole accumulated dust, rust, dirt etc as per departmental instructions.

Providing and fixing scaffolding system to a height of approx. 65 Meter around the stack using rigid pipes at safe intervals , horizontal & vertical joining with cup & lock system including necessary working platform at different levels as required and maintaining it in a serviceable condition for the required duration as approved by the department and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, required connection with the stack wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge

Painting the stack, attached structures of ladder etc at all heights with two coats of Synthetic Enamel paint of approved quality and colour paint over one coat of Zinc Chromate yellow metal primer of approved quality (Approximate area 390 Sq.m) & balance portion of stack with two coats (Approximate area 160 Sq.m)& platforms with one coat (Approximate area 116 Sq.m) of self priming coal tar epoxy paint, “Rust-O-Seal” of Asian Paints / “Protecteros CTE mastic” of Berger Paints or equivalent approved quality having volume of solids 70 % at all heights after cleaning the surface well including cost of all materials, labour, charges, cleaning the site etc. as per deptl instructions. (Structural cleaning will be paid by seperate item)

Applying one coat of Epoxy Zinc Phosphate Primer, of approved quality at all heights after thoroughly cleaning to remove grease, oil, rust, dust and any other foreign materials including cost of primer, scaffolding charges, labour charges and all other incidental charges etc. complete as per departmental instructions at site.

Painting with high build Epoxy paint of approved quality and Distinct colour two coats at all heights, over the primer already done and paid separately/to old surface after neatly cleaning the old surface by removing loose paint, dirt etc.by cleaning with water, scrapping etc. at all heights including cost of paint, labour charges, scaffolding charges etc. complete

Painting letters or figures above 10 cm & up to 20 cm ht. Block, Roman, Italic or Indian with any kind of paint

Painting letters or figures above 30 cm & up to 60 cm ht. Block, Roman, Italic or Indian with any kind of paint.

Applying two coats of self priming coal tar epoxy paint, “Rust-O-Seal” of Asian Paints / “Protecteros CTE mastic” of Berger Paints or equivalent approved quality coal tar epoxy having volume of solids 70 % (aprox.) at all heights including cost of paint, scaffolding charges, labour charges and all other incidental charges etc.complete as per departmental instructions at site

Painting one priming coat on new/old iron work at all heighs with approved quality zinc chromate yellow metal primer of approved brand and quality at all heighs icluding cost of primer and materials, labour, scaffolding charges,cleaning the site etc.as per departmental instructions.

Painting with synthetic enamel paint using approved quality paint as specified two coats in distinct colour at all heights (over a priming coat already done and paid separately) for iron work after cleaning the surface with cotton waste including cost of all materials, labour charges, scaffolding charges etc.complete as per deptl instructions