SPL. REPAIR OF LT DISTRIBUTION NETWORKS AT KRI AREA AND OTHER SANCTIOND WORK AT SSE UNDER THE AREA OF GE (A) NO. 1 JODHPUR

Amount

Supply, laying testing & commissioning of cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 300 sq mm 3.5 core all as specified and directed by Engineer-in-Charge.

All as per item No. 1.00 here-in-above, but cross sectional area 185sq mm 3.5 core.

All as per item No. 1.00 here-in-above, but cross sectional area 150 sq mm 3.5 core.

All as per item No. 1.00 here-in-above, but cross sectional area 95 sq mm 3.5 core.

All as per item No. 1.00 here-in-above, but cross sectional area 50 sq mm 3.5 core.

All as per item No. 1.00 here-in-above, but cross sectional area 35 sq mm 3.5 core.

All as per item No. 1.00 here-in-above, but cross sectional area 16 sq mm 4 core.

All as per item No. 1.00 here-in-above, but cross sectional area 10 sq mm 2 core.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for laying of cables, erection of poles, struts/stays, leveling of yard etc not exceeding 10 M² on plan and not exceeding 1.5 m in depth and getting out in any type of soil, complete all as specified and directed.

M&L for dry clean tibba sand as in sand cushioning to underground cable including punning down of sand layer, complete all as specified and as directed. Note :- Punned thickness shall only be measured and paid.

Supplying and laying un-reinforced precast concrete cable cover, class LV, type 1, flat size 250 mm x 150 mm x 40 mm and abutting each other with gap between adjacent precast concrete cable cover not exceeding 10 mm over underground cables for protection, complete all as specified and as directed.

Returning, filling in including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick in soils complete all as specified and directed.

Removal of excavated material soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed.

M&L for earthing complete with galvanized steel earth plate electrodes 600mmx600mmx6 mm thick buried directly in ground earth (earth pit not less 2.25 m deep below ground level) with top edge of the plate not less then 1.5 mtr below normal ground level connected to galvanised iron earthing strip 32mm x6mm thick by means of bolt nuts check nuts and washers of galvanized iron or steel all as specified & shown in electrical plate No.3 of MES SSR part-I 2010 connected to earth test point as specified and testing on completion including provision of 40 mm dia light grade pipe up to 7.5 mtr length as protection & watering pipe shall be 20 mm bore medium grade including all excavation & earth work in any type of strata incl PCC pit (1:3:6) type C-1 with RCC cover including charcoal , salt, funnel, all as directed at site. Note : 1) Rate included for excavation & earth work in any type of strata as shown in electric plate no-3 in SSR Part-I. 2) Rate included for dismantling of old earth pit and removal from site.

Dismantling of unserviceable ACSR conductor of any type and size from existing poles at various location complete all as directed.

Dismantling of cross arms (clamp, nut bolts), carefully from site complete all as directed.

Dismantling of insulators any type any size from existing poles, complete all as directed.

Taking out serviceable LT cable of any type and size from existing position for re-use and including relaying in ground / along wall at site complete all as directed.

S&F of security light junction boxes of dimension 240x130x110mm with shockproof, rustproof, termite resistant, weather proof, cable entry from bottom, pole mounting arrangement along with 3 phase 4 wire aluminium busbar with insulators and MCB SP 0.5 amps rating with provision of MCB, cable glands, lugs incl. 2.5 Sqmm three core copper cable with pvc conduit from junction box to existing LED fitting etc complete all as specified and directed.

S&F of cable jointing kit for 1.1 KV grade cable for straight through joint complete with jointing material heat shrink type and accessories suitable for 3.5/4 core XLPE, armoured, Al conductor cable of size 120 to 150 Sqmm etc, complete all as specified and directed.

S&F of cable path indicators made out of thick roughly hammer dressed stone slab of size (30 x 75 x 7.5 cm) with applying two coats of synthetic enamel paint, marking of volage and size of cable, route including necessary earth work required complete all as specified and as directed

Excavation in trenches not exceeding 1.5 m wide and exceeding 1.5 m in depth upto 3.0 m for erection of poles, struts/stays, leveling of yard etc not exceeding 10 M² on plan and getting out in soft/loose soil, complete all as specified and directed.

S&F of steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-22 (8.5 metres long), complete all as specified and directed.

Material and labour Cement concrete (1:2:4) type B -1 using 20 mm graded stone aggregate for pedestal of poles/copping including necessary frame work ,fair finishing to exposed surfaces using extra cement complete form, all as directed.

Material and labour for Cement concrete (1:3:6) type C -2 using 40 mm graded stone aggregate for foundation of pole /struts/stay assembly etc complete all as directed.

Supply and fix GI pipe Bracket of 32 mm bore size, medium grade pipe bend to shape of approx length 1.5 Mtr incl 2 Nos. MS Clamp of flat iron of suitable size complete with nut , bolt, washers Including two coats of aluminium paints over a coat of red oxide primer complete all as specified and directed.

S&F of smart LED street light with PDC housing, IP 66 and IR sense based auto ON/OFF of capacity 60 Watts complete all as specified and as directed.

Motorized Auguring/drilling in road at 60 cm depth of dia suitable for laying of 40/50/80mm dia GI tubing pipe complete all as specified and directed.

S&F of GI tubing 40 mm bore, medium grade incl. accessories for protection of cables on poles / under road crossing, complete all as specified and directed.

S&F of GI tubing 50 mm bore, medium grade incl. accessories for protection of cables on poles / under road crossing, complete all as specified and directed.

Supply and fix street light timer switch using digital timer switch for switching of street lights based on timing set manually on digital timer. The digital timer switch along with suitable power contactors, MCBs in incoming and outgoing side, copper short links in contactors, PVC insulators for incoming and outgoing circuit for support, copper cable of 16 Sqmm for incoming and outgoing 40 amps MCBs and 02 Nos support terminals to support the timer box on pole and wall, including suitable lugs and cable glands, enclosure made of rust proof, electric shock proof, termite proof and junction box conforming to IP 65. suitable for three phase, complete all as specified and as directed.

Supply, install, testing and commissioning of LT Panel board, outdoor type, gable roof, floor mounted, factory made suitable for 415 volt, 3 PH, 4 wire, 50 HZ, AC supply system having bus bars chamber with copper bus bars of rating 600 amps duly insulated by insulation of RYB colour 600 Amps rating mounted on porcelain insulators. The panels shall be factory made, double door, made out of 3.15 mm thick MS sheet totally enclosed dust, vermin and rust proof front operated, front and rear opening with locking arrangement fixed with MS angle iron frame of size 40X40X5 mm duly embedded in PCC platform and duly painted with two coats of synthetic enamel paint over a coat of red oxide primer with colour as directed including internal wiring with multistranded copper conductor cable of suitable size incl lugs and cable gland to incoming and outgoing cable with 3 butt hinges to panel doors and locking arrangement as desired complete all as directed by Engr-in-charge and comprising of the following:- Location :- 250 KVA TR Main Panel

(A) IN COMING

(a) MCCB 4 Pole 415 Volts 36 KA 400 Amp rating thermal magnetic adjustable release type(Icu=Ics=100%) -01 No

(b) RYB indicating lamp LED type suitable for panel mounting (Set of three) - 01 No.

(c) Panel mounted multi function energy meter of accuracy CL-1.0 rating - 01 No.

(B) OUT GOING

(a) MCCB 4 Pole 415 Volts 36 KA 350 Amp rating thermal magnetic adjustable release type(Icu=Ics=100%) -01 No

(b) MCCB 4 Pole 415 Volts 35 KA 100 Amp rating thermal magnetic adjustable release type(Icu=Ics=100%) -01 No

(c) MCCB 4 Pole 415 Volts 16 KA 63 Amp rating thermal magnetic adjustable release type(Icu=Ics=100%) -02 No

Supply, install, testing and commissioning of LT Panel board, outdoor type, gable roof, floor mounted, factory made suitable for 415 volt, 3 PH, 4 wire, 50 HZ, AC supply system having bus bars chamber with copper bus bars of rating 600 amps duly insulated by insulation of RYB colour 600 Amps rating mounted on porcelain insulators. The panels shall be factory made, double door, made out of 3.15 mm thick MS sheet totally enclosed dust, vermin and rust proof front operated, front and rear opening with locking arrangement fixed with MS angle iron frame of size 40X40X5 mm duly embedded in PCC platform and duly painted with two coats of synthetic enamel paint over a coat of red oxide primer with colour as directed including internal wiring with multistranded copper conductor cable of suitable size incl lugs and cable gland to incoming and outgoing cable with 3 butt hinges to panel doors and locking arrangement as desired complete all as directed by Engr-in-charge and comprising of the following:- Location :- NARI Panel

(A) IN COMING

(a) MCCB 4 Pole 415 Volts 35 KA 350 Amp rating thermal magnetic adjustable release type(Icu=Ics=100%) -01 No

(b) RYB indicating lamp LED type suitable for panel mounting (Set of three) - 01 No.

(c) Panel mounted multi function energy meter of accuracy CL-1.0 rating - 01 No.

(B) OUT GOING

(a) (a) MCCB TPN 415 Volts 35 KA, 63 Amp rating - 5 Nos

(b) MCCB 4 Pole 415 Volts 35 KA 160 Amp rating thermal magnetic adjustable release type(Icu=Ics=100%) -01 No

Supply, install, testing and commissioning of LT Panel board, outdoor type, gable roof, floor mounted, factory made suitable for 415 volt, 3 PH, 4 wire, 50 HZ, AC supply system having bus bars chamber with copper bus bars of rating 400 amps duly insulated by insulation of RYB colour 400 Amps rating mounted on porcelain insulators. The panels shall be factory made, double door, made out of 3.15 mm thick MS sheet totally enclosed dust, vermin and rust proof front operated, front and rear opening with locking arrangement fixed with MS angle iron frame of size 40X40X5 mm duly embedded in PCC platform and duly painted with two coats of synthetic enamel paint over a coat of red oxide primer with colour as directed including internal wiring with multistranded copper conductor cable of suitable size incl lugs and cable gland to incoming and outgoing cable with 3 butt hinges to panel doors and locking arrangement as desired complete all as directed by Engr-in-charge and comprising of the following:- Location :- NEAR CAFE

(A) IN COMING

(a) MCCB 4 Pole 415 Volts 16 KA 160 Amp rating thermal magnetic adjustable release type(Icu=Ics=100%) -01 No

(b) RYB indicating lamp LED type suitable for panel mounting (Set of three) - 01 No.

(c) Panel mounted multi function energy meter of accuracy CL-1.0 rating - 01 No

(B) OUT GOING

(a) MCB TPN 415 Volts 16 KA, 63 Amp rating -04 Nos

Supply, install, testing and commissioning of LT Panel board, outdoor type, gable roof, floor mounted, factory made suitable for 415 volt, 3 PH, 4 wire, 50 HZ, AC supply system having bus bars chamber with copper bus bars of rating 400 amps duly insulated by insulation of RYB colour 100 Amps rating mounted on porcelain insulators. The panels shall be factory made, double door, made out of 3.15 mm thick MS sheet totally enclosed dust, vermin and rust proof front operated, front and rear opening with locking arrangement fixed with MS angle iron frame of size 40X40X5 mm duly embedded in PCC platform and duly painted with two coats of synthetic enamel paint over a coat of red oxide primer with colour as directed including internal wiring with multistranded copper conductor cable of suitable size incl lugs and cable gland to incoming and outgoing cable with 3 butt hinges to panel doors and locking arrangement as desired complete all as directed by Engr-in-charge and comprising of the following:- Location :- NEW TR 100 KVA

(A) IN COMING

(a) MCCB 4 Pole 415 Volts 35 KA 200 Amp rating thermal magnetic adjustable release type(Icu=Ics=100%) -01 No

(b) RYB indicating lamp LED type suitable for panel mounting (Set of three) - 01 No.

(c) Panel mounted multi function energy meter of accuracy CL-1.0 rating - 01 No.

(B) OUT GOING

(a) (a) MCB TPN 415 Volts 63 Amp rating -02 Nos

(b) MCCB 4 Pole 415 Volts 25 KA 200 Amp rating thermal magnetic adjustable release type(Icu=Ics=100%) -01 No

Supply, install, testing and commissioning of LT Panel board, outdoor type, gable roof, floor mounted, factory made suitable for 415 volt, 3 PH, 4 wire, 50 HZ, AC supply system having bus bars chamber with copper bus bars of rating 400 amps duly insulated by insulation of RYB colour 100 Amps rating mounted on porcelain insulators. The panels shall be factory made, double door, made out of 3.15 mm thick MS sheet totally enclosed dust, vermin and rust proof front operated, front and rear opening with locking arrangement fixed with MS angle iron frame of size 40X40X5 mm duly embedded in PCC platform and duly painted with two coats of synthetic enamel paint over a coat of red oxide primer with colour as directed including internal wiring with multistranded copper conductor cable of suitable size incl lugs and cable gland to incoming and outgoing cable with 3 butt hinges to panel doors and locking arrangement as desired complete all as directed by Engr-in-charge and comprising of the following:-

INCOMING:-

(a) MCCB TPN 415 volts 35 KA 100 Amps - 01 Nos

(b) RYB LED indication lamp panel mounting type (Set of three) - 01 No

S&F of PVC insulated, sheathed weather proof, copper conductor of size 2.5 sqmm, 3 core complete all as specified and directed .

S&F of garden light LED 10 watt, IP65 rated inverted pyramid tripod type LED Bollard with soft 360 deg light distribution light ideal to lit up parks, garden ways and heritage sites complete assembly including accessories nut,bolts,etc complete for fitting complete all as specified and directed .

S&F of security light termination box pole junction box of size 250×200×100 mm, weather proof, including arrangement along with 3 phase 4 wire almunium busbar with insulators and including MCB SP-0.5 amps rating with provision of MCB, incl Power Terminals 16sq.mm - 6 No. The Junction Box shall be insulated and made out of Polycarbonate with glass fiber reinforced. The Polycarbonate JB shall be environment friendly, recyclable, UV resistant, halogen & silicon free, anti acid & anti corrosive. Degree of Ingress Protection IP 65, Pole Mounting type, including M32 Cable glands for 10/16sq.mm x 2/3.5/4.0 Core cable I/C & O/g .- 2 Nos with terminals, MCB, Cable Glands,Al lugs etc complete all as specified and directed.

Surface excavation n. exc. (not exceeding 30 cm deep and avg 15 cm deep) and getting out in any type of soil complete all as specified and directed.

M&L Hardcore of gauge not exceeding 63 mm of broken stone or boulders, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface, compacting with power roller, complete all as specified and as directed.

M&L for cement concrete 1:3:6, type C-2 (using 40mm graded crushed stone aggregate), as in foundation, post, sub base, mass concrete etc, complete all as specified and directed.

M&L for sand filling under floor or foundations including watering and consolidation etc complete all as specified and directed.

Supply and laying machine pressed / factory made chamfered edge cement concrete rubberised interlocking paver block, 60mm thick with 6 mm thick top layers of anti abrasive material of M-35 grade with any colour, design & pattern, & size/ shape, as approved by GE as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness made by table vibratory method using PU mould, laid in required colour & pattern over and including M&L 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified and directed.

Supply and laying machine / factory made kerb stone of M-25 grade,at or near ground level, cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required, complete all as specified and directed.

Note:- (i) The contract sum shall be arrived at after duducting amount of schedule of "Credit" from the Total quoted amount

RISING ELECTRICALS (BID ID -3387462)

M/s R K Enterprises (BID ID -3395251)

Nvimal Engineers and Contractor (BID ID -3387002)

GITANSH ENGINEERS AND COMPANY (BID ID -3387588)