Retender Material supply for Anganwadi construction No 95 ward 8

Amount

Av. 25 cm dia coconut post

Hire charges of Derrick monkey rope

Stone Aggregate(single size): 40 mm nominal size

Stone Aggregate(single size):20 mm nominal size

Coarse sand (zone III)

Portland Cement

Hire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper

Vibrator (Needle type 40 mm)

Stone Aggregate(single size): 10 mm nominal size

Stone for masonry work

Twisted steel/deformed bars

Wall form panel 1250x450xmm

Corner angle 45x45x5 mm 2.50 long

Column clamp 450x1070 mm

Prop 2 m (2-3.5m)

Structural steel such as tees, angles, channels and R.S. joists

Red oxide Zinc chromate primer

Adjustable telescopic prop 3 m (2.02-3.75m)

Beam clamp 300-380 mm (450-1070 mm)

Adjustable span ESO+SI (2.35-3.40)

Gravelly soil (including conveyance)

Solid blocks of size 40x20x10cm

Solid blocks of size 30x20x15cm

Solid blocks of size 30x20x20cm

Fine sand (zone IV)

Mild Steel round bar above 12 mm dia

Flats up to 10 mm in thickness

Water thinnable cement primer for interior wall surface, having VOC content less than 50 gms/litre

Plastic emulsion paint

Synthetic enamel paint in black or chocolate shade

Anjili wood scantls

Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm

Bright finished or black enameled mild steel butt hinges 50x37x1.50 mm

Bright finished or black enameled mild steel screws 40 mm

Bright finished or black enameled mild steel screws 20 mm

Anjili wood planks

48 mm X40 mmX1.5 mm thick Factory made door frame of PVC extruded sections in white, grey or wooden finish

24 mm thick Factory made shutters with styles, rails and panels of PVC extruded sections in white, grey or wooden finish

Brass mortice latch and lock 100 x 65 mm with6 levers and a pair of brass lever handles

Oxidised mild steel tower bolt (barrel type) 200x10 mm

Oxidised mild steel screws 30 mm

Oxidised mild steel handles 125 mm

Oxidised mild steel screws 25 mm

Brass 100 mm mortice latch and lock with 6 levers without pair of handles

Pair Anodised Aluminium lever handles for 100 mm mortice latch and lock

Float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm)

Rawl plug 50 mm (designation 10 nos)

Ceramic Glazed Tiles Ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black

Vitrified floor tile 60x60 cm

Vitreous China orrisa type w.c. pan size 580 mm

Flushing Cistern P.V.C. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe)

100 mm S.C.I. trap with vent heel

Black plastic seat (soild) with lid C.P.brass hinges and rubber buffers

Vitreous china pedestal type wate closet

Vitreous china flat back wash basin 550x400 mm

15 mm C.P.brass tap

C.P. brass waste 32 mm

C.I. bracket for wash basin and sinks

Stainless steel kitchen sink - without drain board 470x420 mm bowl depth 178 mm

PVC pipe 20 mm outer dia 10 kfg/cm2

PVC pipe 110 mm outer dia 6kgf/cm2

PVC bend 63 mm dia

PVC bend 110 mm dia

PVC Elbow 63 mm dia

PVC Elbow 110 mm dia

PVC Tee 63x63x63 mm dia

PVC pipe 40 mm outer dia. 10kgf/cm2

Polyethylene water storage tank with cover and suitable locking arrangemnet

G.I. pipes 40 mm dia

Welding by electric plant

JOSEPH SEBASTIAN (BID ID -2379983)