Office Interior works of Admin. Terrace Office of NRL at Numaligarh

Amount

Supplying,transportation, fitting & erection of 4 seater Modular Workstation with following specification: a. Size per workstation:Main Table 1350 mm W x 600 mm D x 750 mm H & Return Table 1350 mm W *600 mm D x 750 mm H. Partition height: 1200 mm. b. Each workstation to be provided with Mobile pedestal (2 Drawer and one filing Cabinet) [Size: 400mm (W) x 560mm (D) x 560mm (H)], Keyboard pull-out tray and CPU trolley c. Panel thickness: Main Panel 52.4mm d. Panel components: i. 2 nos of vertical extrusion made of aluminum and coated with epoxy powder coating. ii. Horizontal extrusions made of aluminum and coated with epoxy powder coating at every division of tile/block. iii. Blocks made from composite construction of MDF and paper honeycomb. iv. One no. of fabricated bottom frame (comprising of L-channels, formed plates and steel tube welded together and coated with epoxy powder coating) as a welded structure of steel component. v. 1 nos of Plain metal bottom tiles made of 0.8mm thick MS CRCA Grade D as per IS: 513 vi. 2 nos of Pre-laminated intermediate tiles made of 9.0 to 9.5 mm thick pre-laminated particle board conforming to IS: 12823 having all its edges with minimum 0.5 mm thick PVC edging vii. 1 nos of Fabric magnetic top tiles (fabric upholstered metal tiles in 0.6 mm thick G.I. Grade O as per IS: 277. The fabric upholstered with adhesives) viii. 1 no of top trim made of aluminum extrusion. ix. Cover Trims and end trims. x. Joinery post made of aluminum extrusion having average wall thickness of 1.2mm and coated with epoxy powder coating. x. Die Cast Caps (made of aluminium alloy having average wall thickness of 1.2 mm and coated with epoxy powder coating) to cover exposed top edge of Panel at junctions and ends. Panels are to be supported on Double side legs (fabricated by CO2 welded MS Tube with the MS base plate) with levellers. e. Work surface: Made of 25 mm thick pre-laminated particle board having all its edges with minimum 2 mm thick PVC edge banding. The work surface shall be provided with circular cut out of 0.65mm diameter as per the requirement, for passing of wires. These cut outs shall be provided with ABS covers. f. Brackets providing support for work surface: i. Work surface Bracket mounted on to the Horizontal extrusion and made from 2.0 mm thick CRCA grade D steel as per IS: 513-19. All the work surface are mounted on the work surface through round Philip head diameter 4 mm x 19 length having finish zinc plated blue. ii. Holder Bracket made from 2.0 mm thick CRCA grade D steel as per IS:513-19, slid in between end trim and vertical extrusion and mounted on work surface. g. Certification: Product Should be certified by BIFMA Level 3 Certified. Manufacturer Should have ISO 9001, 18001, BIFMA Membership Certification Make- Godrej, Stellar, Methodex, Featherlite, Geekan or equivalent as approved by EIC

Supplying,transportation, fitting & erection of 2 seater Modular Workstation with following specification: a. Size per workstation:Main Table 1350 mm W x 600 mm D x 750 mm H & Return Table 1350 mm W *600 mm D x 750 mm H. Partition height: 1200 mm. b. Each workstation to be provided with Mobile pedestal (2 Drawer and one filing Cabinet) [Size: 400mm (W) x 560mm (D) x 560mm (H)], Keyboard pull-out tray and CPU trolley c. Panel thickness: Main Panel 52.4mm d. Panel components: i. 2 nos of vertical extrusion made of aluminum and coated with epoxy powder coating. ii. Horizontal extrusions made of aluminum and coated with epoxy powder coating at every division of tile/block. iii. Blocks made from composite construction of MDF and paper honeycomb. iv. One no. of fabricated bottom frame (comprising of L-channels, formed plates and steel tube welded together and coated with epoxy powder coating) as a welded structure of steel component. v. 1 nos of Plain metal bottom tiles made of 0.8mm thick MS CRCA Grade D as per IS: 513 vi. 2 nos of Pre-laminated intermediate tiles made of 9.0 to 9.5 mm thick pre-laminated particle board conforming to IS: 12823 having all its edges with minimum 0.5 mm thick PVC edging vii. 1 nos of Fabric magnetic top tiles (fabric upholstered metal tiles in 0.6 mm thick G.I. Grade O as per IS: 277. The fabric upholstered with adhesives) viii. 1 no of top trim made of aluminum extrusion. ix. Cover Trims and end trims. x. Joinery post made of aluminum extrusion having average wall thickness of 1.2mm and coated with epoxy powder coating. x. Die Cast Caps (made of aluminium alloy having average wall thickness of 1.2 mm and coated with epoxy powder coating) to cover exposed top edge of Panel at junctions and ends. Panels are to be supported on Double side legs (fabricated by CO2 welded MS Tube with the MS base plate) with levellers. e. Work surface: Made of 25 mm thick pre-laminated particle board having all its edges with minimum 2 mm thick PVC edge banding. The work surface shall be provided with circular cut out of 0.65mm diameter as per the requirement, for passing of wires. These cut outs shall be provided with ABS covers. f. Brackets providing support for work surface: i. Work surface Bracket mounted on to the Horizontal extrusion and made from 2.0 mm thick CRCA grade D steel as per IS: 513-19. All the work surface are mounted on the work surface through round Philip head diameter 4 mm x 19 length having finish zinc plated blue. ii. Holder Bracket made from 2.0 mm thick CRCA grade D steel as per IS:513-19, slid in between end trim and vertical extrusion and mounted on work surface. g. Certification: Product Should be certified by BIFMA Level 3 Certified. Manufacturer Should have ISO 9001, 18001, BIFMA Membership Certification Make- Godrej, Stellar, Methodex, Featherlite, Geekan or equivalent as approved by EIC

Supplying,transportation & fitting of Revolving Chair-1 with Mid Meshback & Cushion Seat with folowing specification: Overall size is 76.1 cm H x 76.1 cm D x 114.8 cm H with seat height 53.6 cm. Seat assembly is mane of injection molded plastic outer and inner. Plastic inner is upholstered with fabric and moulded foam of density 45 kg/m3 and hardness load 16 kgf as per IS:7888 for 25% Seat size 46 cm W x 48 cm D. The back is made of 3.5 cm x 1.5 cm x 0.2 cm MS ERW oblong tube. It is upholstered using net fabric with high tenacity yam. The pedestal is injection moulded in black 33% glass-filled nylon 66 and fitted with 5 nos twin wheel castors. The pedestal is 66 cm pitch-center dia.Active Bio-synchro Mechanism : The adjustable tilting mechanism is designed with the following features: 360° revolving type, Front - pivot for tilt with feet resting on ground & continious lumber ensuring more comfort, Tilt tension Adjustment can be operated in seating position, 5 position tilt limiter giving option of variable tilt angel to the chair, Seat/ back tilt ratio of 1:2, The mechanism housing is made up of HPDC Aluminium & back powder coated (DEF 40 to 60 micron) , Make- Godrej, Stellar, Methodex, Featherlite, Geekan or equivalent as approved by EIC

Supplying,transportation, fitting & erection of 20 seater Coneference Table with following specification: Table size should be U-shape (2550mm D x 6000 mm W *740 mm H). Should be Made of 36mm thick MDFone side prelaminate board conforming to IS14587: 1998 with 0.4mm PVC membrane pressed on to top and having chamfered edge. Plastic ABS access flap should be provided for easy access to wires and cables. The Under-structure consists of mixture of 25mm and 18mm Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Aluminium alloy 63400 - WP profile is used for connecting panels together. Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Powder coated accent metal strip provided below work surface to enhance aesthetics. It is made of 0.8mm CRCA as per IS 513,epoxy polyester powder coated (DFT 40-60 microns). An array of panels made of 0.8mm CRCA MS IS:513, epoxy polyester powder coated (DFT 40-60 microns) should be used for flow of wires and cables. Provision to mount Anchor Roma 6 module plate should be provided below worktop. Cutout on top with two piece injection moulded plastic part polymer component should be fitted to pullout audio,video cables onto worktop and connect devices charger to power socket below worktop. 20 seater Conference table should be as per layout. Manufacturer should be certified with ISO18001, ISO 9001, ISO 14001 and a member of BIFMA (Chairs are not included in this item) Make- Godrej, Stellar, Methodex, Featherlite, Geekan or equivalent as approved by EIC

Supplying,transportation, fitting of Revolving Chair-2 with Mesh Mid Back & Cushion Seat with following specifiaction: SEAT/BACK ASSEMBLY: The seat should be made up of 1.2 ± 0.1cm thk. hot pressed plywood OCP-QLTA-PL14-18.The Back should be made up of injection moulded glass filled nylon & upholstered using Net fabric with high tenacity yarn. SEAT SIZE: 47.0 cm. (W) x 51.5 cm. (D) BACK SIZE :45.0 cm. (W) x 65.3 cm. (H) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam should be moulded with density =55+/-2 kg/m³ and hardness 16 ± 2 kgf for 25% compression. ARMRESTS : The armrests have an Up-Down adjustment of 8.5 ± 0.5cm which should be provided in armrest structure. Armrest Top has an integrated layer of Thermoplastic Elastomer (TPE). LUMBAR SUPPORT ASSEMBLY: The Lumbar support consshould be ts of polypropylene pad with moulded polyurethane foam & covered with polyester fabric. The Height of Lumbar pad can be adjusted through two projecting knobs provided on the rear side of the pad. Lumbar pad has an adjustment of 8.0 ± 0.5 cm in height. FRONT PIVOT SYNCHRO mechanism: The adjustable tilting mechanism should be designed with the following features. • 360° revolving type. • Single point control. • Front-pivot for tilt with feet resting on ground ensuring more comfort. • Tilt tension adjustment. • 4-position locking with anti-shock feature. • Seat/back tilting ratio of 1:2. PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 10.0 ± 0.3 cm. PEDESTAL ASSEMBLY: The pedestal should be injection moulded in black 30% glass-filled Nylon and fitted with 5 nos. twin wheel castors. The pedestal pitch-center dia should be ∅66.1 ± 0.5 cm (76.1 ± 1.0 cm. with castors). TWIN WHEEL CASTORS: The twin wheel castors s Make- Godrej, Stellar, Methodex, Featherlite, Geekan or equivalent as approved by EIC

Supplying,transportation & fitting of Executive Office Table 1500mm with CPU Hanger with following specification: Enterprise 1500 Table with CPU Hanger size shall be 1500 Width mm x 750 Depth mm x 728 Height mm . Top shall be 18 mm thick Pre laminated particle board all work surface edges shall be having duly sealed with 2 mm thick PVC edgebanding. Understructure Modesty Panel 18 mm thick Pre laminated particle board . The Rectangular frame shall be fabricated component in 1.2 mm thick CRCA , Finish : powder Coat( epoxy polyster) . Leg shall be fabricated component in 38 mm x 25 mm 1.2 mm thick MS ERW ATube ,finish powder coat ( epoxy polyster).The plastic cap for cable travel shall be injection moulded polypropylene and leveler glide for shall be nylon 6 & MS bolt. The storage shall be having 3 drawers with shell and drawer tray 0.6 mm thick CRCA Finish powder coat (epoxy polyster) plus the drawer front shall be 0.8 mm thick CRCA Finish powder coat (epoxy polyster) plus lock with 10 lever and handle and leveller. The wire management shall be horizontal wire carrier 0.7 mm thick CRCA Finish powder coat (epoxy polyster) and vertical wire carrier 0.8 mm thick CRCA Finish powder coat (epoxy polyster) . Manufacturer should be certified with ISO18001, ISO 9001, ISO 14001 and a member of BIFMA. Make- Godrej, Stellar, Methodex, Featherlite, Geekan or equivalent as approved by EIC

Supplying,transportation & fitting of Executive Office Table 1650mm Table with CPU Hanger with following specification: Enterprise 1650 Table with CPU Hanger size shall be 1650 Width mm x 900 Depth mm x 728 Height mm . Top shall be 18 mm thick Pre laminated particle board all work surface edges shall be having duly sealed with 2 mm thick PVC edgebanding. Understructure Modesty Panel 18 mm thick Pre laminated particle board . The Rectangular frame shall be fabricated component in 1.2 mm thick CRCA , Finish : powder Coat( epoxy polyster) . Leg shall be fabricated component in 38 mm x 25 mm 1.2 mm thick MS ERW ATube ,finish powder coat ( epoxy polyster).The plastic cap for cable travel shall be injection moulded polypropylene and leveler glide for shall be nylon 6 & MS bolt. The storage shall be having 3 drawers with shell and drawer tray 0.6 mm thick CRCA Finish powder coat (epoxy polyster) plus the drawer front shall be 0.8 mm thick CRCA Finish powder coat (epoxy polyster) plus lock with 10 lever and handle and leveller. The wire management shall be horizontal wire carrier 0.7 mm thick CRCA Finish powder coat (epoxy polyster) and vertical wire carrier 0.8 mm thick CRCA Finish powder coat (epoxy polyster) . Manufacturer should be certified with ISO18001, ISO 9001, ISO 14001 and a member of BIFMA. Make- Godrej, Stellar, Methodex, Featherlite, Geekan or equivalent as approved by EIC

Supplying,transportation & fitting of Revolving Chair-3 with meshback headrest and cushion seat with following specifications : Overall dimension 76.1 cm H x 76.1 cm W x 128.2 cm H with seat height 54 cm .SEAT/BACK ASSEMBLY: The seat should be made up of 1.2 ± 0.1cm thk. hot pressed plywood OCP-QLTA-PL14-18.The Back should be made up of injection moulded glass filled nylon & upholstered using Net fabric with high tenacity yarn. SEAT SIZE: 47.0 cm. (W) x 51.5 cm. (D) BACK SIZE :45.0 cm. (W) x 65.3 cm. (H) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam should be moulded with density =55+/-2 kg/m³ and hardness 16 ± 2 kgf for 25% compression. ARMRESTS : The armrests have an Up-Down adjustment of 8.5 ± 0.5cm which should be provided in armrest structure. Armrest Top has an integrated layer of Thermoplastic Elastomer (TPE). LUMBAR SUPPORT ASSEMBLY: The Lumbar support consshould be ts of polypropylene pad with moulded polyurethane foam & covered with polyester fabric. The Height of Lumbar pad can be adjusted through two projecting knobs provided on the rear side of the pad. Lumbar pad has an adjustment of 8.0 ± 0.5 cm in height. FRONT PIVOT SYNCHRO mechanism: The adjustable tilting mechanism should be designed with the following features. • 360° revolving type. • Single point control. • Front-pivot for tilt with feet resting on ground ensuring more comfort. • Tilt tension adjustment. • 4-position locking with anti-shock feature. • Seat/back tilting ratio of 1:2. PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 10.0 ± 0.3 cm. PEDESTAL ASSEMBLY: The pedestal should be injection moulded in black 30% glass-filled Nylon and fitted with 5 nos. twin wheel castors. The pedestal pitch-center dia should be ∅66.1 ± 0.5 cm (76.1 ± 1.0 cm. with castors). TWIN WHEEL CASTORS: The twin wheel castors Make- Godrej, Stellar, Methodex, Featherlite, Geekan or equivalent as approved by EIC

Supplying,transportation & fitting of Visitor Chair with following specifications : Seat Assembly : The cushioned seat is made of injection moulded plastic outer and inner. Plastic inner is upholstered with stiched cover and moulded high resilience polyurethane foam of desity 45+-2 kg/m3 and hardness load 16+-2 kgf as per IS:7888 for 25% compression.The stiched cover is made from spacer fabric and leatherette Back assembly cushioned back is made of PU foam with insitu molded MS E.R.W round tube of size 1.9+-0.03 cm x 0.16+-0.0128 cm. It upholstered with spacer fabric and leatherette Visitor tubular frame is powder coated(DFT 40-60 micron) tubular frame is cantilever & made of Ø2.54+-0.03 cm x 0.2+-0.016 cm thick MS ERW tube.The back connected to frame through powder coated (DFT 40-60 micron) high pressure die cast connector piece. Make- Godrej, Stellar, Methodex, Featherlite, Geekan or equivalent as approved by EIC

Supplying,transportation & fitting of 4 Door Vertical Filling Cabinet with following specifications : It should have rigid knock down construction made of CRCA. Panel Thicknes: Top side and drawer front 0.7mm. Frames, Drawer- inside cover,side back side 0.6mm.back,bottom and drawer bottom-0.5mm.The drawer front should have easy to grip full length handle recess integrated into metal drawer fronts. The filing cabinet should also have sanp on type label holder on drawer front. It should have centralized locking with 10 lever cam lock and have anti tipping arrangment to ensure that when one drawer is opened for use, it doesnt allow other drawers to be opened. The drawers should be mounted on high quality precision ball slides. The uniformly distributed load capacity of drawers should be 40 kg for 75000 cycles. It should have plain triangular plate pop riveted at bottom corner for rigidity. Accesories like drawer partition and cradle for hanging A4 files front to back should be there. Epoxy powder coated finish of thickness 50 microns (+/-10 ). Dimension: 1320mmhx470mmDx620mmD. Make- Godrej, Stellar, Methodex, Featherlite, Geekan or equivalent as approved by EIC

Supplying,transportation & fitting of Glass Door Storwel with following specifications : Welded body made with thick CRCA 'D' Grade. Shelf should be made up of 0.7 thick CRCA 'D' Grade. Back should be made up of 0.8 mm thick CRCA 'D' Grade. Doors should be made up of 0.8 mm Thick High Yield strength CRCA and glass. All other components should be made up of 0.9mm Thick CRCA'D' Grade. It should have Brass Handle and a two way locking mechanism with shooting Bolt.Shelves should be height adjustable with a uniformly distributed load capacity of maximum 40 kg per shelf. Epoxy powder coating finish of thickness 50 micron(+_10).M10 Screw type leveller with hex plastic base for levelling. Make- Godrej, Stellar, Methodex, Featherlite, Geekan or equivalent as approved by EIC

Supplying,transportation & fitting of Meeting Table with following specifications : Overall size 2100 mm W x1200 mm D x 750 mm H. Work surface made of 25 mm thick pre-laminated board conforming to IS:12823.All edges of work surface shall be provided with machine pressed 2 mm thick PVC lipping glued with hot melt EVA glue. Legs are place at 40 mm from the edge of worktop.Legs are fabricated from combination of 1.2 mm, 2 mm thick CRCA( as per IS:513), 3 mm , 5 mm thick HR (as per IS:2062). Argo dhield welding is used for fabrication of legs. Legs has inclination in ome plane; it has a ball socket M8 leveler with bottom translucent cap that allow adjustment up to 50 mm height. Legs has extrusion cover made of aluminum alloy which can have different colours. Make- Godrej, Stellar, Methodex, Featherlite, Geekan or equivalent as approved by EIC

Supplying,transportation, fitting & erection of 10 Seater Coneference Table with following specifications : Table size should be U Shaped 3000 mm W X 1150 mm D X 740 mm H. Should be Made of 36mm thick MDFone side prelaminate board conforming to IS14587: 1998 with 0.4mm PVC membrane pressed on to top and having chamfered edge. Plastic ABS access flap should be provided for easy access to wires and cables. The Under-structure consists of mixture of 25mm and 18mm Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Aluminium alloy 63400 - WP profile is used for connecting panels together. Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Powder coated accent metal strip provided below work surface to enhance aesthetics. It is made of 0.8mm CRCA as per IS 513,epoxy polyester powder coated (DFT 40-60 microns). An array of panels made of 0.8mm CRCA MS IS:513, epoxy polyester powder coated (DFT 40-60 microns) should be used for flow of wires and cables. Provision to mount Anchor Roma 6 module plate should be provided below worktop. Cutout on top with two piece injection moulded plastic part polymer component should be fitted to pullout audio,video cables onto worktop and connect devices charger to power socket below worktop. Manufacturer should be certified with ISO18001, ISO 9001, ISO 14001 and a member of BIFMA. (Chairs are not included in this item) Make- Godrej, Stellar, Methodex, Featherlite, Geekan or equivalent as approved by EIC

Supplying & transportation of 3 seater Sofa with following specifications : Overall size should be for 3seater-176cm(w)*83.5cm (d)*77cm(h)*41.5cm(sh). leather : synthetic Frame material : tropical solid wood Seat foam : polyurethane foam with recron layer. Foam density : 18 kg/ cubic cm. Back foam : polyurethane foam with silicon fill At arms. Foam density : 22 kg/cubic cm. Manufacturer should be certified with ISO18001, ISO 9001, ISO 14001 and a member of BIFMA. Make- Godrej, Stellar, Methodex, Featherlite, Geekan or equivalent as approved by EIC

Supplying,transportation & fitting of Office Table-1 with following specifications : Table - T 8 size shall be 1199 mm Width x 590 mm Depth x 750 mm Height . The top panels shall be made from 18 +/- 0.5 mm thick Pre - laminated boards as per with 2 mm thick PVC edge banding on all sides . Understructure shall be made from 0.9 mm +/- 0.09 mm thick powder coated 50 microns (+/-10) CRCA MS. Tubular Frame shall be sq. 25.4 +/- 0.3 mm x 1.2 +/- 0.096 mm thick MS ERW tube .Modesty panel shall be made from 1.0 +/- 0.09 mm thick powder coated 50 microns (+/- 10). Three selve storage fixed drawer shall be having shell 0.5 +/- 0.07 mm thick CRCA MS plus drawer tray 0.5 +/- 0.07 mm thick CRCA MS plus drawer front 0.8 +/- 0.1 mm thick CRCA MS . Also there should be 10 lever cam lock plus handles built in plastic.Manufacturer should be certified with ISO18001, ISO 9001, ISO 14001 and a member of BIFMA. Cerified by BIFMA Level Make- Godrej, Stellar, Methodex, Featherlite, Geekan or equivalent as approved by EIC

Supplying,transportation, fitting & erection of Executive Table 1800mm with ERU and back cabinet with following specifications : The Table set should have Main Table + Side Table + Mobile Pedestal Unit + Back Unit. i) Main Table should be made of 25mm PLB with postformed finish. The size should be 1800mm W x 900mm D x 750mm H ii) The Side Table should be made of 25mm PLB with postformed finish. The size should be 1550mm W x 450mm D x 705mm H iii) The mobile pedestal should be made of CRCA Steel with epoxy poder coated. The pedestal should have three drawers. Top: 25 mm thick Plain particle board (PPB) clad with 0.6 mm thick post formed laminate and 1 mm thick backing laminate. Flat edge duly sealed with 2 mm thick PVC beading. Modesty 18 mm thick plain particle board clad with 1.0 mm thick decorative laminate on both sides. Edge sealed with 2mm thick PVC beading. Make- Godrej, Stellar, Methodex, Featherlite, Geekan or equivalent as approved by EIC

Supplying,transportation & fitting of Executive Revolving Chair with Meshback Headrest & Cushion Seat with following specifications : Seat/Back Assembly: The Cushioned seat assembly consists of seat outer (material 30% Glass Fiber Nylon) & upholstered Seat inner ( material - poly propylene) with moulded polyurethane foam & polyster fabric. The net Back is made up of back outer (material - Glass Fiber filled Nylon ) Back inner (material -PP) and upholstered using Polyester Mesh fabric with high tenacity yam. Full Back size: 75 cm W x 75 cm D x 124 cm H, Seat Size: 55.0cm W . High Resilience (HR) polyurethane foam: The HR polyurethane foam is moulded with density 45 +/-2 kg/m3 amd Hardness load 12+/- 2 kg as per IS : 7888 for 25% compression. The armrest is having two adjustment , Height (6.0±0.5cm) and Depth (6.0±0.5cm) . Height is provided in aluminium structure of armrest which is connected to Aluminium Back spin and is operated bu botton. The depth adjustment is provided in pad which is fixed to armrest structure. Armrest top is made of PU molded over plastic over plastic inner. Active Bio-synchro Mechanism : The adjustable tilting mechanism is designed with the following features: 360° revolving type, Front - pivot for tilt with feet resting on ground & continious lumber ensuring more comfort, Tilt tension Adjustment can be operated in seating position, 5 position tilt limiter giving option of variable tilt angel to the chair, Seat/ back tilt ratio of 1:2, The mechanism housing is made up of HPDC Aluminium & back powder coated (DEF 40 to 60 micron) , The neckrest assembly consist ou upholstered Neckrest inner with moulded poluutertane foam & polyster fabric, upholstered inner is fixed to neckrest cover.Neckrest is fixedto back assembly through neckrest spin. height adjustment of 505± 0.5cm. and rotation adjustment of overall 20°± 2° , Pedestal is high pressure Die cast polish aluminium and fitted with 5 nos. Twin wheel castors Make- Godrej, Stellar, Methodex, Featherlite, Geekan or equivalent as approved by EIC

METHODEX SYSTEMS PVT LTD

Khaitan Carpet Corporation

Godrej and Boyce Mfg Co Ltd