Building

[1] Excavation for foundation upto 1.5 m depth including sorting out 62.70 Cum 117.07

and stacking of useful materials and disposing off the excavated

stuff upto 50 Meter lead.(A) Loose or soft soil

[2] Excavation for foundation upto 1.5 m depth including sorting out 6.90 Cum 162.37

and stacking of useful materials and disposing off the excavated

stuff upto 50 Meter lead.(B) Dense or Hard soil

[3] Providing and laying cement concrete work 1:2:4 (1- Cement : 2- 11.10 Cum 3917.35

Coarse sand : 4- graded stone aggregates 20 mm nominal size)

and curing complete Including cost of formwork and

reinforcement for reinforced concrete work in (A) For PCC

[4] Providing and laying Ordinary cement concrete work 1:1.5:3 (1- 8.80 Cum 5256.15

Cement : 1.5- Coarse sand : 3- graded stone aggregates 20 mm

nominal size) and curing complete Including cost of formwork and

reinforcement for reinforced concrete work in (A) footings

[5] Brick work using common burnt clay building bricks having 10.00 Cum 4021.02

crushing strength not less than 35 kg./Sq.Cm. in foundation and

plinth in Cement Mortar 1:6 (1- Cement : 6 -fine sand) (B)

Conventional

[6] Providing and laying ordinary cement concrete 1:1.5:3 (1- Cement 12.50 Cum 8040.53

1.5- coarse sand : 3- graded stone aggregates 20 mm nominal size)

and finishing smooth with,curing etc.complete including the cost

of formwork but excluding the cost of reinforcement for R.C.C

work in (A) BEAMS :(ii) Having cross-sectional area more than

0.08Sq.M and upto 0.12 Sq.M

[7] Providing and laying ordinary cement concrete 1:1.5:3 (1- Cement 1.00 Cum 10589.43

1.5- coarse sand : 3- graded stone aggregates 20 mm nominal size)

for R.C.C lintel including finishing smooth with,curing etc.

complete including the cost of formwork but excluding the cost of

reinforcement.

[8] Providing and laying ordinary cement concrete 1:1.5:3 (1- Cement 0.70 Cum 6876.57

: 1.5- Coarse sand : 3- graded stone aggregates 20 mm nominal

size) for reinforced concrete Chhajjas not exceeding 10cm.

thickness upto floor two level including finishing the exposed

surfaces with cement mortar 1:3 (1- cement, 3 Fine sand) to give a

smooth and even surface centering and formwork and curing

complete excluding cost of reinforcement.

[9] Providing and laying ordinary cement concrete 1:1.5:3 (1- Cement 5.80 Cum 9062.91

1.5- coarse sand : 3- graded stone aggregates 20 mm nominal size)

and finishing smooth with,curing etc. complete including the cost

of formwork but excluding the cost of reinforcement for R.C.C

work in (B) COLUMNS: (iii) Having cross-sectional area more than

0.12Sq.M and upto 0.18 Sq.M

[10] Providing and Laying ordinary cement concrete 1:1.5:3 (1- 6.50 Cum 7258.19

Cement 1.5- coarse sand : 3- graded stone aggregates 20 mm

nominal size) and finishing smooth with curing etc. complete

including the cost of formwork but excluding the cost of

reinforsement for R.C.C work in (iii) Slabs having more than 10 cm

and upto 13 cm. thickness

[11] Filling available excavated earth (excluding rock) in trenches. 46.00 Cum 130.39

plinth, sides of foundations etc. in layers not exceeding 20 cm. in

depth consolidating each disposited layer by ramming and

Description of Item Quantity Unit Rate In figures Amount

layers of 20cm. thickness including watering, ramming and

consolidating etc. complete.

[13] Filling in plinth with sand under floors including watering 4.00 Cum 460.18

ramming, consolidating and dressing complete

[14] Providing and laying ordinary C.C. M-200 (C.C. 1:1.5:3 - 1 cement, 1.30 Cum 6283.46

1.5 coarse snad, 3 graded stone agggregate of 20 mm nominal

size) and curing complete including the cost of formwork and

excluding the cost of reinforcement for reinforced concrete work

for horizontal and vertical R.C.C. fins.

[15] Providing TMT Bar FE 500D reinforcement for R.C.C. work 4631.40 Kg 76.21

including bending, binding and placing in position complete upto

floor two level

[16] Brick work using common burnt clay building bricks having 14.00 Cum 4289.32

crushing strength not less than 35 kg./Sq.Cm. in foundation and

plinth in Cement Mortar 1:6 (1- Cement : 6 -fine sand) (B)

Conventional For GF

[17] Half brick masonry in common brunt clay building bricks having 45.16 Sqm 715.03

crushing strength not less than 35 Kg/Sq.Cm. in Cement mortar

1:3 ( 1-Cement : 3- coarse sand ) with 2 Nos of 6mm Mild steel

round bars after every three course embedded in Cement Mortar

in foundation and plinth (B) Conventional

[18] P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm 47.20 Sqm 1248.74

(average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on

new surface or fixing on existing flooring by adhesive material

including dismentaling of existing flooring and jointed with color

cement slurry including finised with flush pointing & cleaning the

surface etc. complete for light shade

[19] Providing and laying Ceramic tiles 8mm thick in flooring treads of 51.10 Sqm 949.68

steps and landing laid on a bed of 12mm thick cement mortar 1:3

(1-cement : 3-coarse sand ) finishing with flush pointing in white

cement including Dedo.

[20] Providing and laying white glazed tiles 8mm thick in flooring 9.10 Sqm 908.32

treads of steps and landing laid on a bed of 12mm thick cement

mortar 1:3 (1-cement : 3-coarse sand ) finishing with flush

pointing in white cement.

[21] Providing and laying polished Kota stone slab flooring over 20mm 7.50 Sqm 989.44

(Average) thick base of cement mortar 1:6 (1-cement : 6- coarse

sand) or L.M. 1.1.5 laid over and jointed with grey cement slurry

mixed with pigment to match the shade of slab including rubbing

and polishing etc. complete. (A) 25mm thick

[22] Providing and laying Black or Colour Machine Cut free edges, 11.90 Sqm 2942.91

Machine polished Granite Stone slab 18 mm thick single piece

For Stair, Step, Landing, Skirting etc as per design including fully

moulded round front edge and 1cm nosing and necessary groove

on trade of steps laid on 20 mm thick cement mortar 1:6 (1-

cement : 6 coarse sand) jointed with grey cement slurry including

rubbing, polishing & Finishing etc complete as directed by

Enginner in Charge.(Sill-Jems & Cupboard)

[23] Constructing Sandwitch Platform of 18 mm thick Polished Black 2.00 Sqm 3089.46

Granite at top and 30 mm thick Kota stone slab flooring fitting at

bottom with cementing Materials / adhsives including macking

necessary grooves in walls with Vertical Kotastone 30 mm x 2 No

sandwitch thick every 60 cm centre to cenre including all labour

material of approved quality incl. full moulded round front edge

fixed in wall for partition and jointed with grey cement slurry

including rubbing and polishing etc. complete .

[24] Providing and Fixing Windows with 40 X 40 X 5 mm. iron angle & 12.20 Sqm 3963.64

frame 30 X 30 X 4 mm. size in Double Shutter with 1 mm thick MS

plate with hold fasts, iron hinges, handles, stopper, locking

arrangement etc. comp. Steel welded is built up section cutting

hoisting, finishing in two coats of oil painting over coat of prime

coat etc. complete.

Description of Item Quantity Unit Rate In figures Amount

[25] Providing and Fixing 32mm thick decorative flush Door shutter 4.00 Sqm 4001.62

(Shutter fixing to Stone frame) of approved quality and design

consisting of both side 1.00 mm thick texture laminated flush door

in single piece, all edges shall be covered with teak wood beading

incl. required fitting and fixtures of S.S.,cylindrical lock system

with all labour, tools materials as directed by Engineer-In-Charge.

[26] Providing and fixing 30mm thick FACTORY MADE SOLID PANEL 1.60 Sqm 1146.37

PVC DOOR SHUTTER consisting of frame made out of M.S. tubes of

19 gauge thickness and size of 19mm x 19mm for stiles and 15mm

x 15 mm for top and bottom rails. M.S. frame shall have a coat of

steel primers of approved make and manufacture, M.S. frame shall

be covered with 5 mm thick heat moulded PVC ‘C’ channel of size

30 x 50 mm forming stiles, and 5mm thick 75mm wide PVC sheets

for top rail, lock rail and bottom rail on either side, and 10mm

(5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top

rail and bottom rail, Panelling of 5 stiles and rails with 30mm wide

x 5mm thick PVC sheet beading on eighter side, and joined

together with solvent cement adhesive,. An additional 5mm thick

PVC strip of 20mm width is to be stculk on the interior side of the

‘c’ channel using PVC solvent cement adhesive etc. complete as per

direction of Engineer in charge, manufacture’s specification and

[27] Providing 20mm thick sand faced cement plaster on walls upto 195.70 Sqm 335.65

height 10 metres above ground level consisting of 12mm thick

backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick

finishing coat of C.M. 1:1 (1-cement : 1-sand) including scaffolding

curing etc. complete.

[28] Providing 15mm thick cement plaster in single coat on Rough 130.00 Sqm 194.07

(Similar)side of single or half brick walls for interior plastering

upto floor two level and finished even and smooth in (i) Cement

mortar 1:3 (1-cement:3-sand)

[29] Finishing wall with weather proof exterior emulsion paint on wall 195.70 Sqm 114.53

surface (two coats) to give an required shape even shade after

thoroughly brushing the surface to remove all dirt, and remains of

loose powdered materials.etc complete

[30] Applying two coats of acrylic laphy (putty) & two coats of primer 129.50 Sqm 40.59

of approved brand and manufacture on new wall surface to give

an even shade including thoroughly brushing the surface free

from mortar dropping and other foreign matter and sand papered

smooth as per instruction of Engineer in charge & approved make.

[31] Wall painting (two coats) with plastic emulsion paint of approved 129.50 Sqm 78.90

brand and manufacture on undecorated wall surface to give an

even shade including throughly brushing the surface free from

mortar droppings and other foreign matter and sand papered

smooth.smooth.

[32] Painting (Bala Painting) undecorated wall surface to give an even 30.20 Sqm 407.03

shade including throughly brushing the surface free from mortar

droppings and other foreign matter and sand papered smooth. on

walls shade and pattern as directed by Architect and Authority.

[33] Providing laying and jointing in true line and level 15mm dia. 30.00 Rmt 72.65

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the wall

with the help of clamp at every two metre C/C or shall be

concealed as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

Description of Item Quantity Unit Rate In figures Amount

[34] Providing laying and jointing in true line and level 25mm dia. 39.00 Rmt 91.84

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the wall

with the help of clamp at every two metre C/C or shall be

concealed as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

[35] Providing laying and jointing in true line and level 50mm dia. 18.00 Rmt 195.67

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the wall

with the help of clamp at every two metre C/C or shall be

concealed as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

[36] Providing, laying and jointing in true line and level 110 diametre 18.70 Rmt 835.14

U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain

and other end socketed with rubber ring, & fittings conforming to

ISI 14735-1999 of approved make for drainage system pipe line,

pipe shall be jointed with each other with rubber lubricant, pipe

shall be fixed on wall using of PVC clamp of the size 110 mm

diametre x 149 mm length x 145 mm heigh at every 2000 mm

center to center or shall be concealed in walls as directed

including necessary fittings such as bends, shoes etc. including

testing of pipes and joints and jointed with adhesive solvent

cement including cost of all materials.

[37] Provision and fixing water closet squatting orissa type W.c. pan 1.00 Each 1387.03

size 580mm integral footrest and 100 mm P or S trap and in

cluding 25 mm dia CP brass flush valve and GI inle connection etc.

comp. (A) Vitreous china long pattern white or color.

[38] Providing and fixing wash basin with pedestal of std. Height with 1.00 Each 1817.65

single hole for pillar tap with C.I or M.S brackets painted white

including cutting holes and making goods the same including. C.P.

brass waste Couplin, and waste pipes and bottel trap (A) Vitreous

china. (ll) Flat back washbasin 550 mm x 400 mm size (1) in

[39] Providing and fixing Gun metal check or non return fullway wheel 1.00 Each 186.83

valve.(A) 15mm dia.

[40] Providing and fixing in position cowel went to pipes.(C) 100mm 2.00 Each 501.87

[41] Providing and fixing screw down bib taps of following size.(B) 3.00 Each 186.83

Brass chromium plated screws down Bib Tap. (i) 15mm dia.

[42] Providing and fixing Gun metal check or non-return fullway wheel 1.00 Each 420.63

valve.(C) 25mm dia.

[43] Construction of Septic Tank (1.5m x 1.5m x 1.5m) using hollow 1.00 No 11939.29

brick masonary wall, covering with preast RCC slab including

jointing the slabs with pointing and providing 110 diametre

U.P.V.C (Type B) Connecting the line upto Manhole etc. complete

[44] Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 2.00 Each 558.36

mm diameter with jali of the following nominal diameter of self

cleansing design with C.I scread down or hinged grating including

the cost of cutting and making good the walls.

[45] Providing & Fixing S.W. Gully trap with C.I. Greating brick 2.00 Each 1246.92

masonay chamber and water tight C..I Cover with frame of

mm X 300 mm Size ( Indian ) with standard weight (i) Square

mouth traps (C) 150 mm x100 mm size P or R Type.

[46] Providing erecting and fixing double coated ISI water tank of 1000.00 Liter 3.95

required capacity each with all necessary fittings and connection

etc. complete on terrace.

Description of Item Quantity Unit Rate In figures Amount

[47] Providing and fixing SS Sink Glosy ASIS 304 Grade x 1mm thick 1.00 No 3158.03

with over all size 610 x 460 mm & bowl size 560 x 410 x 200 with

single hole for pillar tap Fixing in sanwich platform including

cutting holes and making goods the same, 15 mm dia pillar tap.

Stop cock 15 mm dia, necessary fixtures, connections and waste

pipes etc complete.

[48] Providing , Painting ,Lettering Nandghar Logo Board As Pe Design 1.00 Each 1515.00

Specified And Providing Two Direction Side Of the Building

Photograph Copies -4 Of Each In Postcard size og the Completed

Work As Directed 23Cm x 45 Cm.

[49] Constructing brick masonry chamber for underground C.I. 2.00 Each 2932.93

Inspection chamber and bends with bricks having crushing

strength not less than 35Kg/Cm2 in C.M. 1:5 C.I. cover with frame

(Light duty) 455mm x 610mm intenal dimensions total weight of

cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.)

and Wt. of frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-cement

:2- coarse sand :4-graded stone aggregate 20mm size) foundation

concrete 1:5:10 inside plaster 15mm thick with cement mortar 1:3

finished smooth with a floating coat of neat cement on walls and

bed concrete etc. complete.(i) Inside dimensions 455mmx 610mm

and 450mm deep for single pipe line.

[50] Providing and Fixing FIRE EXTINGUISHER 6 KG ABC including 2.00 No 2550.25

cost of labour complete with providing 1 year guarantee for each

bottle including testing and comissioning.

[51] Providing and fixing M.S. grills/ Railing/ Main Gate/MS ladder of 685.30 Kg 104.95

required pattern to M.S. frames of windows ,Door , Jali etc. with

M.S. flats at required spacings and frame alround, square or

round Bright bars of 12mm dia, with round headed bolts and

nuts or by screws including all Fixture etc complete as directed

by Engineer in charge

[52] Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 10.00 Point 465.61

sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multi strand copper wires up to 10 mtr length , in below

type of pipe erected with 6A Modular type switch / bell push &

accessories and earth continuity of following type, erected on PVC

/ Metallic/Wooden box, single mounting base frame covered with

textured/metallic/white front plate modules erected on / in wall /

ceiling as per pipe erected, with necessary Lamp holder/ceiling

rose / H.D.Connector as directed. (f) with medium class Rigid PVC

pipe and accessories erected oncealed in wall/ceiling complete

[53] Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm 4.00 Point 654.48

(Green) both are of .ISI marked 1.1 KV Grade FRLS PVC insulated

multi strand copper wires up to 10 mtr length, in below type of

pipe erected with 6A Modular type switch and hum free EME step

type electronic fan regulator mounted and accessories with earth

continuity of following type erected on PVC / Metallic/Wooden

box, single mounting base frame covered with

textured/metallic/white front plate modules erected on / in wall /

ceiling as per pipe erected. with necessary ceiling rose /

H.D.Connector as directed. (f) with medium class Rigid PVC pipe

and accessories erected concealed in wall/ceiling completeCat- II

[54] Point wiring for on board Looped Plug with 6A Modular type 2.00 Point 236.34

switch & 5 pin socket erected on PVC / Metallic/Wooden box,

single mounting base frame covered with textured /

metallic/white front plate modules erected on / in wall / ceiling

with following type accessories Cat- II

Description of Item Quantity Unit Rate In figures Amount

[55] Point wiring for Individual Plug with & earth wire of 1.5 sq.mm 2.00 Point 493.89

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

multi strand copper wires up to 10 mtr length, in below type of

pipe erected complete with Modular type switch & 5 pin Plug

erected on PVC / Metallic/Wooden box covered with appropriate

front plate modules erected on / in wall / ceiling as per pipe

erected with following type of accessories. [I] For 6A Plug and 6 a

switch with 2-1.5 sq.mm Cu. Wire from nearby switchboard/mcb

db board (f) with medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling

[56] Supplying and erecting LED indoor fittings with LEDs of wattage 8.00 No 238.36

0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing

used as a heat sink shall be made of thick sheet Steel conforming

to IS: 513/CRCA/ aluminium die cast powder coated and high U.V.

& corrosion resistance with diffuser with company mark/name

160V to 270V, Power Factor more than 0.95, THD < 15%,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE:

Belowdescription have shown ranges of Wattage capacity of LED

capacitybetween the ranges shown.) (A) Tube Light with integral

driver (iii) 18-20 Watts, Surge - 2KV,IP-20, conventional 4 feet cat-

[57] Providing & erecting open well type horizontal mono block pump 1.00 No 9362.70

set with stainless steel body having following specification (A)

H.P. single phase open well motor pump set having discharge of

115 LPM @ 15 mtr. head suitable for 32 mm dia.delivery pipe with

control panel

[58] providing and erecting Miniature circuit breaker single pole 6A to 1.00 No 91.91

25A suitable to operate on 240 V A.C. system and having breaking

capacity 10 KA to be erected in existing box. confirming to IS

8828/1996 with ISI Mark Cat-ll

[59] Providing & erecting 240 V MCB double pole switch for lighting 1.00 No 278.76

Load (B Curve) having 10 KA breaking capacity & confirms to IS :

8828 in existing box having following capacity

[60] Providing and erecting Sheet Steel powder coated MCB 1.00 No 1492.78

distribution board - flush / surface mounted fitted with busbar,

neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC

61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The

DBs should be used of same company of MCB to be used) suitable

for (A) single phase incoming and horizontal single phase

outgoing (b) sheet steel double door (IP-43) (iv) 12 Way

[61] Providing and erecting Approved make Ceiling fan with double 3.00 No 1596.81

ball bearing ISI mark with condenser A.C. 23OV.50 c/s.1200 mm.

sweep complete, canopy erected on existing hook or clamp with

earthing. [Make shall be approved by Engineer in charge]

[62] Providing and Erecting following Shock Proof Tissino Type 2.00 No 219.17

accessories erected on 3 mm thick PC (Polycarbonate) Sheet in

PVC / Metal Box erected on Wall / Ceiling. (14) Electronic Hum

Free EME Socket Type Step Fan Regulator.

[63] Supplying Erecting Aproved make Bracket Fan of ISI Mark with 1.00 No 2105.85

230 Volt A.C., 50 Cy/S 400/450 mm Sweep complete on Wall or

With lead cores and connections complete. (Make shall be

Approved by Engineer in Charge)Category II.

[64] Providing and erecting Pipe type earthing with 40 mm dia 2.5 mtr 1.00 No 994.85

long 'B' grade G.I. pipe with necessary coupling buch buried in

specially prepared earth pit & G.I. earth wire of 8 SWG erected &

connected as directed. For using salt and charcoal / coke as

required for pipe type earthing

Description of Item Quantity Unit Rate In figures Amount

[65] Mains with 1.1 KV FRLS PVC insulated ISI Marked Standard 30.00 Rmt 62.62

Copper Conductor wire in following Type of Pipe to be erected

Concealed in / Flushed on Wall / Ceiling with 1.5 Sq.mm Copper

Conductor FRLS PVC Insulated Standered wire of Green Colour for

Earth continuity of following size. (A) With Medium Class Rigid

PVC Pipe and Accessories. (a) 2 wire 1.5 Sq.mm.

[66] Providing and fixing 600mm x 450mm bevelled edge mirrror of 1.00 No 833.73

superior glass mounted on 6mm thick A.C. sheet or plywood sheet

and fixing to wooden pluge with C.P. brass screws and washers.

[67] Providing and fixing pre-cast Rubber Dye / steel Dye inter locking 3.60 Sqm 686.90

concrete block 60mm thick with grade of concrete M300 pnumatic

compressed / vibrated mechanically and as per approved design

Confirming to IS 15658 : 2006 including 35 mm Sand layer for

levelling and filling the joint with sand in proper line and level as

per guidlines of IRC : SP 63-2018 etc. Complete

[68] Providing and Placing IT wood writing table having size 1.50 X 1.00 No 15150.00

0.75 X 0.75 mt with one side drawer with using of 19mm thick WP

wood, top cover with 1 mm thick wood type Formica including

using of all necessary material & labour etc completed as directed

by Engineer incharge

[69] Providing and Fixing pin cushion display board having size 1.20 X 1.00 No 808.00

0.75 mt including using of alluminum section frame, 18mm thick

WB plywood, nevy blue Cushion cloth pin etc completed as

directed by Engineer Incharge.

[70] Providing and fixing of hook of 10mm or 12mm dia including 1.00 No 303.00

drilling hole, fixing of male- female thrade fastner sealing the

same with appoxy compound, finishing the same etc complete as

directed by Engineer incharge.

[71] Providing and fixing medical device & equipment standio meter 1.00 No 1414.00

height measuring scale 2.10mt long including fixing in wall with

using of all heavy SS screw, rail etc complete as directed by

Engineer incharge.

[72] Providing and fixing Pre writing board having size 30cm X 20cm 13.00 No 404.00

with decorative acralic border etc completed as directed by

Engineer incharge.

[73] Providing and supplying standard PVC (Polyvinyl chloride) Chair 3.00 No 1010.00

with handle of approved design and make as directed by Engineer

[74] Providing and supplying standard PVC (Polyvinyl chloride) Stool 3.00 No 606.00

having size 3.75 X 0.60 X 0.45mtr of approved make as directed by

Engineer incharge.

[75] Supplying & erecting approved LED TV 32Inch ,230V,Resolution: 1.00 No 25250.00

4K Ultra HD (3840 x 2160) | Refresh Rate: 60 hertz,1 TV Unit,

Remote, 2 Table Stand, 1 User Manual, 2 Batteries,1 Warranty

Card Connectivity Technology Wi-Fi, USB, Ethernet, HD

Connectivity: 3 HDMI ports to connect set top box (1HDMI port

eARC supported) | 2 USB ports to connect hard drives and other

USB devices | Built- in WiFi | Bluetooth | Ethernet RJ45 |

earphone Jack | 1 Optical digital audio output (SPDIF) | 1 RF-

Radio frequency input | 1 AV input Sound: 24W Audio Output |

Dobly Atmos | Audio equalizer | Dolby Digital | Lip-sync

adjustment | Sound mode:Standard, Theatre, Sports, Music,

Speech, Late Night Smart TV Features: Google TV | Google

Assistant | Voice command | Screen mirroring: DLNA, Chromecast,

Miracast, AirPlay | Sleep Timer | On/Off Timer | Supported Apps:

Netflix, YouTube, Prime Video, Hotstar, SonyLiv, Hungama,

JioCinema, Zee5, Eros Now Display: 178 drgrees wide viewing

angle | VRR | ALLM | MEMC | HDR 10 | HLG | Dolby Vision |

Multiple picture modes

supported:Dynamic，Standard，Sports，PC/Game，Energy

Saving，Cinema，FILMMAKER MODE Warranty Information:

Year Comprehensive Warranty on product provided by Toshiba

from date of purchase

Description of Item Quantity Unit Rate In figures Amount

[76] Supplying & erecting 5 stage single reverse osmosis water 1.00 No 9595.00

purification system with M.S. powder coated frame, prefilter

housing with 'O' ring presediment filter GAC filter, carbon filter

suitable buster DC pump capacity 80 psi, mention with 40 psi

inline type post carbon filter auto low & high pressure switches

with following size of storage tank & LPH capacity & erected as

[A] 10 Ltr / Hr with 7 Ltr StorageTank

[77] Providing and fixing PVC modular kitchen cabinet consisting of 2.40 Sqm 7575.00

base and wall units, made from high quality rigid PVC boards

(minimum 15-18 mm thick), including shutters, shelves, drawers,

SS hinges, telescopic channels, handles, magnetic locks, necessary

fittings, cutting, fixing, complete as per design and direction of

[78] Providing and Fixing SS 304 Foldable Checking bed having size 1.00 No 6060.00

1.50 X 0.60 X 0.75 mm including using of 25mm dia pipe, SS 2mm

thick, matter of 25.4 (1") of 40 density, cover with regine cloth of

approved quality etc completed as directed by Engineer

[79] Providing and Fixing of SS 304 Hanger for bag including using all 10.00 No 252.50

necessary materials like SS rail, screw etc completed as directed

by Engineer lncharge.

[80] Providing and laying cement concrete 1:3:6 (1- Cement : 3- Coarse 0.40 Cum 3996.68

sand : 6- crushed stone aggregates 20 mm nominal size) and

curing complete including cost of formwork in (A) Wall Caps /

Total :

I/We am/are willing to carry out the work at………………….% above/below percent(Should be written in figures and words) of the estimated

rate mentioned above. Amount of my /our tender works out as under.

Estimated Amount put to tender Estimated Amount put to tender

Deduct …............................. % Below Add …............................. % Above

In Words In Words

1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which no

extra payment shall be made.

2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3. GST and Income tax TDS will be deducted at a source while making payments of bills

4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement

Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the cost

of difference of cement consumption have been deducted from the rate of original item at the rate of input rate mentioned in all the tender.

5. Dismentalling of Credit materials amounting of Rs. 0.00 must be recovered from Contractor's respective R.A. Bill.

Dated Signature Deputy Executive Engineer Executive Engineer

the Contractor. Panchayat (R & B) Sub Division Panchayat (R & B) Division

Matar Kheda