(i) Construction of RUB by box pushing technique using RH girder & associate civil works in connection with closing of manned LC No. 260 at Km 515/19-21 between IB-Jharsuguda Section. (ii) Balance work for Construction of RUB by box pushing technique using RH girder & associate civil works in connection with closing of manned LC No.336 at Km.663/10-12 between Saragaon Deori-Champa stations and LC no. 274 at Km.547/21-23 in Himgir Yard on Jharsuguda-Bilaspur section of Bilaspur Division.

B-(Covered under Section-Z of SOR-2006) 355531.95 Below/P

Item Breakup - A-(Covered under USSOR-2010)

cum Extra for lead of earth work above initial lead of 50m, in all kind of soils and rocks :

1167.04 50m and upto 150m

1167.04 150m and upto 500m

2735.57 thereof, after the initial 1.5m, for earth work in all soils

2916.01 ( X 2) thereof, after the initial 1.5m, for earth work in all soils

1944.58 ( X 3) thereof, after the initial 1.5m, for earth work in all soils

5122.34 foundations for buildings and bridges to cover dressing to neat dimension and plumbing sides etc. Note : Dressing under this item is payable for the total quantity of excavation in foundation and not partly

330.19 under floors including watering, ramming, consolidating and dressing complete BILASPUR DIVISION-ENGINEERING/SOUTH EAST CENTRAL RLY

5343.92 bunds, around buried type abutments, bridge gaps, trolley refuges, rain bunds if provided, platforms etc. with earth excavated from outside railway boundary entirely arranged by the contractor at his own cost as per RDSO's latest guidelines and specifications and special condition of contract including all leads, royalty, lifts, ascents, descents, crossing of nallahs or any other obstructions. The rates shall include all dressing of bank to final profile, demarcation and setting out of profile, site clearance, removing of shrubs, roots of vegetations growth, heavy grass, benching of existing slope of old bank, all handling/re- handling. taxes, octroi and royalty etc. as a complete job. Cut trees shall be property of railways and to be deposited in the railway godown unless specified otherwise in the Special conditions of contract

6567.92 earth/blanketing material filled in embankment with contractor's rollers of suitable capacity, type and size to achieve specified density as per specification, testing as per IS codes incl. cost of water, T&P consumable material and all labour as a complete job. The work is to be executed as per Latest edition of "Guidelines for Earthwork in Railway Projects" issued by RDSO, Lucknow

681.29 chips, shingle, stone boulders, block kankar, pitching stones, rubble stones, laterite, coal, surkhi, dry mortar, sand, moorum, earth, manure or sludge, ashes, lime, debris, muck, malba, etc. for lead upto 25 km. Note : Lead under this item is payable when the same exceeds 500m. Loading/Unloading G.I. sheets, rails, joists, built up sections, angles, C.I., Ductile pipes, A.C Pipes, or G.I. pipes RCC/PCC beams / slabs and other miscellaneous ironwork or wood work including lead upto 50m and stacking properly into/from trucks, trailors or wagons.

528.00 iron work, rails, pipes, wooden logs, stones over pitching stone size, RCC/PCC beams / slabs etc. and all similar articles (each individual article or bundle being more than 3.5 metres long in the longest direction) by truck, trailor, etc including all loading, unloading and stacking, lead over 500m and upto 10 km. Note : Lead under this item is payable when the same exceeds 500m.

9000.00 part thereof, over 10 km and upto 100 km over item no. 021170

228.00 ( X 90) part thereof, over 10 km and upto 100 km over item no. 021170

228.00 ( X 30) part thereof, over 100 km and upto 400 km over item nos. 021170 &.021171 BILASPUR DIVISION-ENGINEERING/SOUTH EAST CENTRAL RLY

684.00 ( X 90) part thereof, over 100 km and upto 400 km over item nos. 021170 &.021171

245.00 condition) for leveling and dressing ground / dismantling structures including disposal of debris through dumpers etc. with contractor's labour, JCB machine, machine operator, fuel, etc. The contractor shall arrange road permit for vehicle for all the States of operation, as per instructions of engineer in-charge and vehicle shall not be more than three years old. Payment shall be made for actual working hours at site. Providing and laying in position cement concrete of specified proportion excluding cost of cement, centering and shuttering - All works upto Plinth level :

742.52 aggregate 40mm nominal size) Providing and laying cement concrete, up to p l i n t h in retaining walls, walls (any thickness) including attached plasters, columns, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets etc, excluding the cost of cement and of shuttering, centering.

3.50 aggregate 20mm nominal size) Providing and laying in position cement concrete of M 20 grade, excluding the cost of cement and of centering and shuttering, as per direction of the Engineer in charge :

cum Centering and shuttering including strutting, propping etc. and removal of form work for :

Sqm Supply and using cement at worksite :

Tonne Providing and laying in position M 20 Grade concrete for reinforced concrete structural elements but excluding cost of centering, shuttering, reinforcement and Admixtures in recommended proportion (as per IS:9103) to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer in charge

1240.23 foundation of washable aprons, HS tank, pile cap, footings of FOB, and Platform shelter etc.

292.59 floor two level. Centering and shuttering including strutting, propping etc. and removal of form for :

856.60 raft foundation of washable aprons, Pile caps, Footings of FOB etc.

2944.91 plasters, buttresses, plinth and string courses etc. BILASPUR DIVISION-ENGINEERING/SOUTH EAST CENTRAL RLY Providing, hoisting and fixing in position upto floor two level M20 Grade precast RCC work including setting in cement mortar 1:3 (1 cement : 3 coarse sand) and finishing smooth with 6mm thick cement plaster 1:3 (1 cement : 3 fine sand) on exposed surfaces complete including cost of centering, shuttering, finishing, Admixtures in recommended proportion (as per IS:9103) to accelerate, retard setting of concrete, improve workability without impairing strength and durability, excluding cost of cement and steel reinforcement, as per approved plan & direction of Engineer incharge.

0.98 flue tops etc. Supplying Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.

Kg Brickwork with clay fly ash FPS bricks of class designation 75 in superstructure above plinth level upto floor two level. In:

16.00 Structural steel work in single section including cutting, bending, straightening, drilling, rivetting, bolting, hoisting, fixing in position, including applying a priming coat of approved steel primer, complete - upto 6m height above GL

Kg Structural steel work welded in built up sections, trusses and framed work, girders, stagings, racks, etc including cutting, bending, straightening, hoisting, fixing in position, including applying a priming coat of approved steel primer, complete - upto 6m height above GL

4191.90 down bolts with nuts and washer plates complete

1067.90 washers complete Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required

500.00 railings, brackets, gates and similar works BILASPUR DIVISION-ENGINEERING/SOUTH EAST CENTRAL RLY

4126.52 coated trapezoidal profiled sheet of depth 28-30mm at 195-205mm pitch distance with precisely engineered 'Rib & Flute" design. Profiled sheets shall be min. 0.5mm TCT/0.45mm BMT high tensile zinc aluminium alloy coated zincalume / galvalume steel sheet (550 mpa yield strength) having a coating of mass of 150 gsm zinc-aluminium coating AZ-150 total on both sides as per, AS 1397:1993 finished with 20 microns approved colour coating of Silicon Modified Polyester (SMP) / Super Polyester paint coat on exposed surface over a primer coat of 5 microns and a back coat of 5 microns on reverse side over a 5 microns primer coat. There shall be 2 small ribs/square flutes between profiles for providing additional strength. The sheet to be fixed over the purlins with hexagonal head self drilling suitable fasteners with neoprene / EPDM washer on crests of the sheet Providing & fixing of coloured galvalume plain sheet flashings at ridges / apex junctions of roofing cladding, cover / corner / barge pieces etc. in required shape, colour duly fixed with stitching screws (with EPDM washers etc. as per site requirement)

Running Upto 600 mm width (girth) Metre 12 mm cement plaster of mix -

Sqm 15 mm cement plaster on the rough side of single or half brick wall of mix -

160.00 of 2mm average thickness over plastered surface to prepare the surface even and smooth complete

160.00 work with 1st quality acrylic washable distemper (ready mixed) of approved manufacturer and of required shade and colour complete as per manufacturer's specification

555.65 exterior paint with Silicone additives of required shade on new work (Two or more coats applied @ 1.43ltr/10 sqm over and including one coat of water proofing cement paint applied @ 2.20 kg/10sqm Painting with synthetic enamel paint of approved brand and manufacture to give an even shade

Sqm Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade

244.48 under coat of suitable shade with ordinary paint of approved brand and manufacture Painting with aluminium paint of approved brand and manufacture to give an even shade

Sqm BILASPUR DIVISION-ENGINEERING/SOUTH EAST CENTRAL RLY Providing and laying non-pressure NP3 class ( m e d i u m duty ) R.C.C. pipes including bends etc with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1cement: 2fine sand) including testing of joints etc. complete above 800mm dia.

92.00 waste and vent pipes including jointing and cost of spun yarn and sand etc. complete

324.50 and vent pipes including jointing and cost of spun yarn and sand etc., complete Centring and shuttering including strutting, propping etc. and removal of form for :

39.00 Galvanized steel channel sleepers of mild steel of tested quality conforming to IS: 2062, on fabricated girders including all fixtures fastenings as per approved Railway drawings with labour, material, tools and plants etc. as a complete job including galvanizing of all components

138.04 boulders weighing not less than 35 kg each with the voids filled with spalls on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and Technical specifications (Filter media to be paid separately under the relevant item) Providing and laying water bound macadam with specified stone aggregate, stone screening and binding material including screening, sorting, spreading to template and consolidation with power road roller of 8 to 10 tonne capacity etc. complete.

530.15 including stone screening 13.2mm size

561.00 concrete in roads, having a cube strength of M-30 using cement, coarse sand and graded stone aggregate of 40mm nominal size as per approved design. mechanically vibrated, steel form work, curing, providing and filling construction & dummy joints with approved joint filler (conforming to grade B of IS: 1834) rounding of the edges, making & filling the grooves as per drawing

201.14 heavy integral stem, reflective, aluminium die cast with elegant finish of size 100x100mm and 20mm high having a stem of 50mm (or 12mm dia. 90mm long) screwed and nailed to fix into the road surface or at the nosing of the central verge. The road studs should have reflectors fitted on one side of the studs (3Nos. 7 element or 1No. 29 element reflector) complete BILASPUR DIVISION-ENGINEERING/SOUTH EAST CENTRAL RLY

153.61 marking strips (retro-reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and in accordance with applicable specifications Supplying at site -

353.75 size made of GI wire of 4 mm dia.

297.90 fencing /chain link fabric with 1.8m posts of specified material and design placed at every 3m apart embedded in cement concrete blocks every 15th post (or nearer as per site conditions), last but one end post and corner post shall be strutted on both sides and end post one side only and struts embedded in cement concrete blocks, provided with welded steel wire fabric 0.90m wide rectangular mesh 75x25mm size weighting not less than 7.75kg/ Sqm. fixed between the posts fitted and fixed with G.I. staples on wooden plugs or tied to 6mm bar nibs with G.I. binding wire (cost of posts, struts welded steel wire fabric, painting, and concrete to be paid for separately)

10 Second class kail wood in scantling cudm Total 56896254.44

Item Breakup - B-(Covered under Section-Z of SOR-2006)

2450.00 described in Indian Rly.'s Permanent Way Sleeper Manual of any type of sleeper before relaxation of speed-1st packing including picking up slacks in between kutcha packing and 1st packing as per requirement. (HBS Rate)

2450.00 per Indian Rly.'s Permanent Way Manual of Sleeper any type of sleeper before relaxation of speed-2nd packing or 3rd packing. The item also includes picking up of slacks between 1st packing and 2nd packing or between 2nd packing and 3rd packing. (HBS Rate) BILASPUR DIVISION-ENGINEERING/SOUTH EAST CENTRAL RLY

through screened track following 3rd packing as per Sleeper Indian Rly.'s Permanent Way Manual. The item also includes picking up slacks between 3rd packing and consolidation packing. Note: Through packing in item 5,6 & 7 above will be done as per Indian Rly.'s Permanent Way Manual and will include adjustment of gauge. cross level, alignment, longitudinal levels, tightening and fixing of fastenings, squaring & respacing of sleepers, making up of ballast section as per ballast profile for the track including sleeper spacing etc. - complete. (HBS Rate)

78.00 60/65 Kg. sections of 90 UTS in running Hole track. (HBS Rate)

20.00 with hacksaw in running track. (HBS Rate) Cut

20.00 hacksaw outside track. (HBS Rate) Cut

20.00 in running track. (HBS Rate) Note for items Cut 40 to 55: - Contractor is to use his own equipment, materials and labour etc. and the rate is inclusive for this and is for the complete job."

245.00 traffic Block by Rly.'s diplorry including loading into diplorry upto 30m. lead , unloading and stacking at the destination as per direction of Engineer-in-charge with a free lead upto 30m. and carrying the rails over diplorries upto 1 km. (HBS Rate)

78.00 joints and traction bonds between rails and OHE masts with Contractor's materials. The work involved is drilling 5 to 20mm. dia. holes on webs of rails and OHE masts at places and points as directed by the representative of S & T and Electric Traction Deptt. as per their programme. N.B.:- Rates payable shall be 20% over and above the corresponding items rate for drilling holes in rails (i.e. the rates as given under items 40 to 51) and will thus depend upon the section and hardness of the rail." (HBS Rate) BILASPUR DIVISION-ENGINEERING/SOUTH EAST CENTRAL RLY

20.00 welder, moulder, chipper, lutter, aligner, striker/hammerman & adequate Nos. of semi-skilled and unskilled labour and supplying petrol 46@6 litres/joint for facilitating welding works on track by shifting the joint sleepers upto 30cm. (1' - 0") on either side, providing suitable gap of about 23mm. to 25mm. by pulling back of rail including removing keys, spikes & other fastenings as required and refixing the same after welding, clearing the rail ends, fixing the Petrol Tank & heating the rail, ends by railways/approved Contractors equipment and chipping the excess materials if required, bringing the shifted joint sleepers to the specific spacing and packing them to the required specification as directed including adjustment of required gaps for welding, aligning, levelling etc. complete including Contractor's own files for filing after welding in running track. (HBS Rate)

20.00 do- -do- -do- -do- -do- -do- -do- for filing after welding on cess. (HBS Rate)

383.00 fittings and fastenings including stacking Metre within 30 Metres in connection with of Rail dismantling of track. (HBS Rate)

124.00 fittings including stacking within 30 metres Sleeper in connection with dismantling of track. (HBS Rate)

123.50 including stacking within 30 metres in connection with dismantling of track. (HBS Rate)

735.00 ( X 2) stages of not more than 50mm. at a time, Track including one through packing (for each Metre 50mm. or part thereof). (HBS Rate) Total 131678.50

Item Breakup - C-(N.S. Items)

Development and proof checking of Sqm structural design and drawings of pre-cast per RM RCC Boxes, casting bed and casting cum Thrust Bed from reputed Govt. Institutions such as IIT, NIT (if required or as directed by Engineer-in-charge), casting of RCC box, casting bed and casting cum thrust bed as per approved drawing with M-35 grade concrete with contractor's all materials and insertion of precast RCC boxes in proper level and alignment through the railway embankment under running traffic conditions by BOX PUSHING METHOD as per Railway's approved GAD. The rate shall also include the following :- (i) Development and approval of design mix. (ii) Supply & using of OPC-53 cement confirming to IS:12269 cement or any other grade/type of cement as approved by Engineer-in-charge and as found suitable for R.C.C. Box/Bridges casting from reputed manufactures like Ambuja, Ultratech, Grasim, J.K.Laxmi, ACC, BILASPUR DIVISION-ENGINEERING/SOUTH EAST CENTRAL RLY Lafarge or Birla etc. (iii) Supply & using of TMT (Fe 500) bars of 8mm and above and MS bars of 6mm dia confirming to IS:1786/1985 and IS:432 respectively manufactured by SAIL, TISCO, JINDAL or RINL and other brands as per Railway specification of reinforcement /steel along with their cutting, bending, binding as per approved drawings with contractor's annealed galvanized binding wire of 16 SWG. (iv) Providing casting- cum RCC thrust bed including cement & steel, drag sheet and M.S. cutting shield of contractor's own design. M.S. sheet of suitable thickness for end & around the box and at the junction of 1st & successive boxes for protection of infiltration of soil/slurry, sagging of earth by the side of RCC box. (v) Excavation of all types of earth/cutting of rock if any (Payment of rock cutting only will be made separately under relevant item of USSOR- 2010) to facilitate box pushing and disposal of earth at a nominated place. (vi) Deployment of necessary skilled and unskilled labour, supervisors, tool, plants, equipments, e.g. jacks, mixture, vibrators etc. (vii) Manufacture & placement of design mix concrete with approved quality of cement, coarse aggregate, fine aggregate, water, admixtures, steel shuttering, mechanical vibration etc. complete in all respect as prescribed. (viii) Provision of necessary temporary arrangements, epoxy grouting of joints, dewatering etc. (ix) Maintenance of track above and on approaches (100 mtr each side) of proposed box from starting to finishing the whole work of box pushing & retaining wall & special care during the box pushing. (x) All lead, lift, accent, descent, transportation, taxes, duties etc. (xi) Two coats of epoxy paint & Bituminous/Coal Tar paint with approved quality materials on all inner and outer surfaces (except bottom face) of precast box. (xii) Payment for this item shall be made on the basis of internal dimensions of the RCC box i.e. clear internal dimensions between side walls and from invert to ceiling without considering projections and depressions e.g. haunches, wearing course, plaster, holes etc. Design of box to be done & should confirm to the RDSO standard drawings. (xiii) The rates include provision of sand bag as required (minimum 500 bag), providing rail clusters, trenches for cable shifting etc. complete in all respect. Note: The unit of this item, "Sqm per RM," refers to square metres per running metre, measured based on internal dimensions. BILASPUR DIVISION-ENGINEERING/SOUTH EAST CENTRAL RLY

Pushing of already casted RCC box as per Sqm approved drawing (internal dimensions) per RM over thrust bed in proper level and alignment as per Railways approved GAD, making all necessary arrangements of sufficient number of jacks of adequate capacity and its consumables like hydraulic oil etc., arrangement for electricity, Generator minimum 30 KVA, arrangements for smoother pushing work, if any, together with all labour and material. The rate includes the cost of all type of jacks, operating the jacks and labour, material and supervision etc. including all lift, ascends, descends, loading and unloading, handling, rehandling, crossing of stream, nallah, railway track level crossing etc. or any other obstruction, cost of all safety works and all safety precautions of all labours and material as a complete job. Nothing extra shall be paid on this account. No additional payments shall be made for skilled or unskilled labour used in the item. Necessary arrangements like gunny bags filled with sand shall be made to deal with any unexpected requirements. Payment for this item shall be made on the basis of internal dimension of RCC box i.e. clear internal dimensions between side walls and from invert to ceiling without considering projections and depressions e.g. haunches etc. Note: The unit of this item, "Sqm per RM," refers to square metres per running metre, measured based on internal dimensions.

Assembling and erection of fabricated steel MT structure with all Contractors labours scaffolding, tools, plants, including Contractors service bolts/dritts as directed by the Engineer in charge (in block & without block).

Dissembling of RH Girder or fabricated steel MT structure with Contractors labours scaffolding, tools, plants, including preparation of base by Contractors as directed by Engineer-in- charge (in block & without block).

Assembling (Launching and de-launching) of fabricated restricted height plate girder/any other suitable girder/temporary arrangement and crib or seating arrangement, removal and reinsertion of track of required length for RH girder in connection with box pushing work with the help of road crane of capacity300MT or above as approved by Engineer-in-charge at desired location carefully and safely under traffic & power block with all contractor's labours, tools & plant, materials, crane, machinery, preparation of base as directed by Engineer-in- charge. Note:- Launching and de-launching will be considered as two separate activities. BILASPUR DIVISION-ENGINEERING/SOUTH EAST CENTRAL RLY

Metalizing of steel work of RH girder with Sqm grit/sand blasting as per IRS-BI-2001 following by one coat of each primer ( as per IS:5666) one coat of Zinc Chrome primer (as per IS:104) and two coats of aluminum paint (as per IS:2339) with all labour, T and P and materials as a complete job and as directed by Engineer-in-charge.

Launching of railways relieving girder of Each overall length from 12 mtr. to 22 mtr. after removing track ballast excavation earth on properly prepared wooden/CC cribs supports as per the approved scheme of launching railway drawing and specifications by contractors own tools plants machineries, labor equipment's etc.. The work includes fixing of track i.e. sleepers and rail to railway specifications and standards on there living girder and necessary adjustment to the longitudinal and cross levels after insertion of the reliving girder in track to maintain safety of trains on the relieving girder and its approaches.

De-launching of railways 12 mtr. to 22 mtr. Each long relieving girder from bridges and stacking at bridge approach with contractors labor, trailer, cranes, derricks, tools and plants, equipment's consumable etc. Complete as per specifications, special conditions and detailed scope of work furnished in the tender and as directed by engineer-in-charge. Note (i) Dismantling of the over laying track shall be paid through other relevant item. (ii) each girder consist of two cross braced leaves.

Supply of fully retro reflective board made Sqm with HIP (High Intensity Prismatic) grade retro reflective sheet of Avery Dennison or 3M make, Board made with 2mm thick aluminium sheet back supported with 25x25x3mm angle, back supported diagonally with same angle along with arrangement for fixing at site including nut bolt (minimum 10mm dia) complete. W/L board, LWR/CURVE Board/Gang Board/Point Board jurisdiction boards, Road sign boards or any other type of boards of various size as per the provision of G&SR, IRPWM and approved circulars & drawings etc.), complete in all respect.

Supply of 5 HP self priming pump with Each 75mm dia. Suction hose pipe (25 feet long) & delivery hose pipe (100 feet long) with one No. bend 75 mm size, 3 Nos, hose pipe and 6 Nos rubber packing white paste etc. BILASPUR DIVISION-ENGINEERING/SOUTH EAST CENTRAL RLY

Destressing of LWR/ CWR track with all Track contractor labour, tools and plants as per metre direction of Engineer -In- Charge or his authorized representative at site. NOTE:- This includes opening of pandrol clips/keys including jammed clip/keys, if any, removing ballast from top and rail seat for free movement of rail, cutting of rail as required (payment for cutting will be made separately), replacement of wornout fittings, greasing of pandrol clips and sleeper inserts with contractor grease of IS- 408 grade - 0- if not already greased by contractor during rail renewal, supporting the LWR/CWR rail on pipe rollers (of 1 inch to 2 inch dia of different strength and to be arranged by the contractor at his own cost) hammering the rail with wooden hammer to release any locked-up stress, re-fixing the rail with sleepers and all fittings complete. (Supply of fitting will be arranged by the Railway)

Laying of track on newly laid box including Per filling of ballast, laying of PSC sleepers, rails Track lifting and packing of track to met out Metre longitudinal alignment, gauge, level of approaches to make track fit for 20KMPH.

Greasing of all four ERC and eye of MCI Per insert & liners on the PSC sleeper with Sleeper contractor's approved quality graphite grease as per IS 408 GR '0' including removing and re-fixing of pendrol clips with appropriate tools, plants, equipment's, labour, leads, lift etc complete. (Note- In case greasing of ERC & eye of insert is done, 60% of payment shall be paid.)

Cutting of rail 60Kg/52Kg by abrasive disc Each cutter with contractor's labour, disc, fuel Cut and consumable etc complete.

Weld collar (20 Cm. Wide Strip all around Per including under side of the rail foot but Weld excluding the rail top table) painting by bituminous black paint (IS:9862-1981) and numbering the welds with contractor's own paint, brush, thinner, all other consumables and tools and plants as per directed by Engineer-In-Charge the scope of work also include to remove rugged plate & replacing after painting where as required.

Fabrication, insertion and removal of rail MT cluster below the running track to ensure safety of track during box pushing in correct positionand alignment with Railway rails and contractors MS flats, wooden blocks, and 12 mm dia bolts etc., as per approved drawing including removing and filling back of ballast below track under traffic conditions of Electrified/Non-Electrified section with all contractors, labour, tools, tackles, consumables plants, and 50MT capacity crane and any other material required for execution of work in all respect with all lead and lift, transportation and as directed by Engineer in-charge. Payment quantity shall be as per the weight of rail in rail cluster used at site or as per approved drawing, whichever is minimum. (This items taken from USSOR-2021) Total 37393893.38 BILASPUR DIVISION-ENGINEERING/SOUTH EAST CENTRAL RLY