NIe-T- 70/2025-26 (Sl. No. 01)

Supplying and laying true to line and level Anti-Skid, Full Body, Homogeneous & Granular finish Vitrified Tiles conforming to IS:15622-2006 & IS 4457-2007 and testing shall be made in accordance with IS:13630 [Non- modular sizes for tiles with Skid resistance > 0.5, Mohr's hardness > 5.0, Staining resistance: Class-1, Water Absorption: E < 0.5%], MOR > 35 N/sq.mm in Internal area of building e.g. Toilet Block, Passage, Corridor, Accessible Open Terrace etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg./Sqm or using Polymerised Adhesive (6 mm thick layer applied directly over finished artificial stone floor/ Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per Sqm below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles/ epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contractor).b) In Ground Floor: Sizes-600 mm x600mm x10 mm with breaking strength >1500 N

Supplying,fitting & fixing granite slab 15mm to 18mm thick infloor, lobby, stair, landing and treads etc. over 20mm (avg)thick base of cement morter (1:2) laid with white cement slurry@ 4.40Kg per Square meter before placing of granite and jointed with white cement slurry @ 2.0 Kg per square meter with necessary pigments and complete as per direction of Engineer-in-charge including cost of all materials, labours, curing and roughening of concrete surface complete In ground floor(a) Area of each Granite slab upto 0.60 Square meter

Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to light/fan/call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board with top cover plate flushed in wall incl. mending good damages to original finish a) Avg run 9 mtr.

Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC) with 16A Modular type switch, without plug top on 4 Module GI /PVC Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply of 250 V 300 mm. sweep,1400 rpm industrial type heavy duty (ISI)high speed exhaust fan.

Fixing only 300 mm dia exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection.

Fixing only louver shutter/cowl on wall with necy. bolts & nuts (6 mm dia x 62 mm long)

S & F 250 V 1200 mm sweep BLDC ceiling fan with 50% energy consumption complete with blades, canopy, down rod etc. having fixed with 2 nos ball bearing fixing the same, painting of down rod, connection by supplying 3×1.5 sq. mm stranded copper wire.

Supply and fixing 3/4"MS down rod For fixing the Ceiling Fan with all accessories.

Supplying & Fixing iron beam fan clamp of two piece type, as per approved specification, fabricated from 40 mm x 9 mm MS sheet flat suitable for beam having flange upto 150 mm wide – (As per Drawing no. 476 of PWD Specification Book – May 1991)

Supply & Fixing 240V, Modular Socket (2 Module) type fan regulator (Step type) (Brand approved by EIC) on existing Modular GI switch board with top cover plate incl. making necy. connections etc.

Supply of 240V LED tube light box type batten with tube .

Supply of recess mounted 18 watt LED down light which range is a breakthrough technology and reliable heat management to deliver a long lasting efficient solution .

Supply of angular batten holder with LED lamp.

Fixing only bulk head /ceiling fitting on wall /ceiling by screws etc.

Supplying and fixing 19 mm dia and 3 mm thick polythene pipe complete with fittings as necy. under ceiling/beam, bound with 22 SWG GI binding wire incl. supplying and drawing 1x18 SWG GI Wire as fish wire inside the pipes and fittings and providing 50 mm dia disc of MS sheet (20 SWG) having colour paint at one face fastened at the load point end of the polythene pipe with fish wire (synchronizing with roof/beam casting work of building construction)

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire of the following sizes in the prelaid polythene pipe by the GI fish wire and making necy. connection as required. a) 4×10 sq.mm. + 2×6 sq.mm.

b) 2×10 sq.mm. + 1×6 sq.mm.

d)2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm)

e)3 x 22/0.3 (3x1.5 sqmm)

i) Earthing with 50 mm dia GI pipe (ISI-M) 3.64 mm thick × 3.04 mtr long and 1 × 4 SWG (Hot dip) wire 4 mtr long) 13 mm dia × 80 mm long GI bolts double washers incl. S & F 15 mm dia GI pipe protection (1 mtr long) to be filled with bitumen party under the ground level and partly above ground level driver to an average depth of 3.65 metre below the ground level & restoring the surface duly rammed.

S & F earth bus bar of GI (Hot Dip) MS flat of 50 mm × 6 mm on wall is having clearance of 8 mm from wall including providing drilled holes on the bus bar complete with GI bolts, nuts, washers spacing insulators tc. As required.

Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe including Extra for treatment of soil by using salt & charcoal or coke for plate electrode

Compound lighting: Supply & Erection of G.I Octagonal designed decorative 7 mtr long conical hot dip galvanized mild steel step pole (inbuilt loop box) with bottom dia 130 mm, top dia 70 mm, thickness 3 mm, base plate 220x220x12 (LxBxT) mm, J-bolt(GI) size 4x20 dia (no xdia) mm, both length 600 mm,projected bolt length. 48.30x3.25 mm thick base plate of 220 mm, with 4 nos holes on 220X12 mm PCD suitable for M16X600mmX4 Nos bolts along with civil foundation work.Make- (Make as per EIC)

Supplying and fixing of 240 V 6 A SPMCB of breaking capacity 10 KA & C characteristics on din rail of existing insulated loop box of octagonal pole and necessary connection including supplying and fixing bakelite / perspex top cover of size 200 mm X 150 mm X 65 mm as per GS

Supplying and fixing of 1m decorative single arm bracket

Supply of 1.1 KV grade PVC /A aluminium conductor2 core X 10 sq.mm

Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed

S & F compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture -proof entry of XLPE/PVC armoured cables as bellow. i)2 core X 10 sq.mm.

Finishing the end of following XLPE/PVC armoured cable by crimping method incl.S & F solderless socket (Dowels make,) tapes,anticorrosive paste & joining materials. i) 2 core X 10 sq.mm.

Supplying and fixing 4 WAY MCB SS enclosure with IP-20/30 protection, powder coated including 2 NOS 6-32A two pole MCB, concealed in wall after cutting the wall & mending good the damages to original finish incl. painting, connection & provision for earthing attachment

Supply of 72 W LED Street light luminaire with high power LED

Supplying and fixing of 3 X 1.5 sq.mm PVC insulated multi-stranded copper FR wire from loop box to fittings in 15 mm dia polythene pipe and connection etc. as required.

Drilling borehole by Rig machine with Odex-115 (Simultaneous driving of casing pipe) method of drilling through any kind of soil, boulder, rock etc. upto the required depth. This item includes the cost of hiring of Rig machine, Compressor, Supporting vehicle and other machinery & equipments with operators, drivers, laborers etc. Proportionate cost of drilling tools and accessories such as Hammer, Pilot bit, Reamer bit, Guide device, Guide sleeve etc. Cost of consumable materials like fuel & lubricants, electrode for welding, any other related equipment, materials and service etc. a). GL to 60 mtr

b). 60 mtr. to 100 mtr.

Lowering and placing of filter assembly of required length and Extraction and partening off the casing pipe of required length.

Mobilisation and transportion of the Rig machine and its accessories and others materials, etc. to the site.

Development of the tubewell by Air Compressor upto the satisfaction of EIC. It includes arrangement of all machinery, supply of fuel & lubricants, laborers, any others etc.

Construction of Platform and installation of India Mark-II hand pump as per technical specification

Supply and delivery of 80 mm dia x 3 mtr. Long HDPE Jacketed Strainer

Supply and delivery of Bit tube (0.67mtr. Long) for Odex-115

Supply and delivery of Casing Shoe (for Odex-115)

Supply and delivery of Packer Assembly (for Odex-115)

Supply and delivery of MS TW Specials (Clamp, Cap, Bail plug, Lugs, Ring etc.)

Chemical and Biological testing of water sample

Supply and delivery of 128 mm ID/139 mm OD MSERW fin cut pipe

Cement cealing

S & F of G.I. Accessories (R-brand) ISI approved with all jointing materials: a) 32 mm dia Bend

b) 32 mm dia Elbow.

c) 32 mm dia Nipple.

d) 32 mm dia Union.

e) 32 mm dia Socket.

Supply and Installation of 2 HP Submersible pump motor set suitable for 125 mm dia deep tube well capable for discharging 35 LPM(max) of Clear water at a total head of 58 mtr(min) having a discharging outlet of 32 mm dia with 2.5 sqmm (Finolex) 3 core PVC flat copper cable of 50 mtr including LT make DOL starter (Make approved by EIC)

S & F 20 mm dia G.I. Pipe (Jindal-M) for protection of cable.

S & F suitable size of M.S. Flat clamp for holding the column pipe, pump motor in the tube well with necessary nuts, bolts, washer as per direction of EIC.

Supplying, fitting and fixing G.I. cap at top suitable for tube well.

Supply, fitting, fixing 32 mm dia G.I. Pipe (ISI-M) column pipe for submersible pump lowering having 3-mtr average length including special threading in Lathe and S & F one Tata GI socket.

Supply, fabrication & installation of header assembly made of 100 mm dia 1 meter long black MS pipe having both sides sealed by welding provision for with MS sheet for 1 No. 32 mm dia inlet & 3 nos 32 mm dia outlet to be fixed on 32 mm short pieces welded with 100 mm header including 4 nos gun metal wheel wash out line with provision for pressure gauge and 1/2'' Fullway valve,nipple and presure gauge to be fixed on Header with all supporting arrangement & painting etc as per direction of EIC.

Supplying, fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes of approved make conforming to IS-15778: 2007 . with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. 32mm dia

GI Pipe Protection: Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required ISI-M-50 mm dia.

Please Enable Macros to View BoQ information