CONSTRUCTION OF HT LINE FROM KARINGATTUMALI TO PIDAVOOR

Fitting and erecting one HT PSC Pole in position incl. fitting cross arm, digging & back filling pit, drawing earth leads.

Additional rate for providing one disc set on any type of HT pole for making cut point.

Fitting one Additional 75x40mm, 1.8m Channel cross arm in existing single pole incl. conveyance of materials.

Loading HT PSC pole from the stacking place and unloading the same at work site (transport by vehicle).

Fitting one set AB switch and giving connection

Drilling hole of various sizes on existing Channel/Cross Arm.

Fitting one Additional 2.4m/3m Channel cross arm (75x40x6mm), in existing 11kV DP incl. conveyance of materials.

Fitting and providing one HT Fly stay for 11kV pole using HT PSC pole incl. digging & back filling pits.

Fitting and providing one HT Stay for 11kV pole incl. digging & back filling pit.

Dismantling (without damage) one LT PSC/RCC Strut pole incl. removal of clamps and stacking.

Dismantling one LT 2 line cross arm from existing pole.

Dismantling one LT 4 line cross arm from existing pole.

Dismantling (without damage) one LT PSC/RCC pole after disconnecting stays, strut etc. and stacking the same.

Dismantling (without damage) LT stay incl. digging pit in all classes of soil and backfilling

Fitting one LT 2 line cross arm on HT or LT existing poles incl. fitting insulators and binding the same with LT Line.

Fitting one LT 4 line cross arm on HT or LT existing poles incl. fitting insulators and binding the same with LT Line.

Dismantling and reconnecting Sph service connection from the OH line incl. lowering down the WP portion.

Dismantling and reconnecting 3ph service connection from the OH line incl. lowering down the WP portion.

Replacing holder, fused bulb/CFL, changing wires, giving connection etc. of street light incl. conveyance of all materials.

Fitting one No. Section fuse on LT line with dropping cables, crimping sockets, connecting with bolt&nut etc.

Dismantling one section fuse

Additional rate for refitting/redoing one Shackle set and reshackling one span while renewing any type of pole.

Transferring LT Sph 2/3 wire OH line to newly erected HT/LT pole and refitting all items to the new pole.

Transferring LT 3ph 4/5 wire OH line to newly erected HT/LT pole and refitting all items to the new pole.

Dismantling (without damage) one HT PSC/RCC Strut pole incl. removal of clamps and stacking.

Dismantling (without damage) one 11kV PSC/RCC pole after disconnecting stays, strut etc. and stacking the same.

Stringing of one km 3 PH 11kV line with XLPE Insulated ACSR Raccoon

Fitting and providing one Strut using HT PSC pole incl. digging & back filling pit.

Fitting one Additional V cross arm in existing single pole incl. conveyance of materials.

Providing one Coil Earth using GI earth wire, digging separate pit at standard distance away from the pole/structure & backfilling.

Providing one Earth using earth pipe incl. digging separate pit at standard distance away from the pole/structure & backfilling.

Transporting poles by hired vehicle to a distance upto 5km and carrying upto 4 poles excluding loading & unloading.

Fitting and erecting one HT A type Pole in position incl. fitting cross arm, digging & back filling pit, drawing earth leads.

Loading HT A type pole from the stacking place and unloading the same at work site (transport by vehicle).

Providing concrete muffing (0.45x0.45x1.5m) inclusive of cost of all material (as per specification).

Fitting and erecting one HT DP using A type pole in position incl. fitting 2 channel cross arms, digging & back filling pit, drawing earth leads.

Fitting one Additional 2.4m/3m Channel cross arm (100x50x6mm), in existing 11kV DP incl. conveyance of materials.

Fitting and erecting one HT DP using PSC pole in position incl. fitting 2 channel cross arms, digging & back filling pit, drawing earth leads.

Please Enable Macros to View BoQ information