Construction of Coy Office room Semi Permanent tubular shed for SOs living accommodation Kitchen cum dining hall for Jawans at Milam Post of 14th Bn ITB Police Jajrdewal Distt Pithoragarh UKD

Amount

Excavation work in foundation trenches or drains not exceeding 1.5 m in width or 10 sqm on plan including dressing of sides and ramming of bottoms lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed , within a lead of 50 m.

Filling available excavated earth ( excluding rocks) in plinth side of foundation, under floors in layers not exceeding 20 cm in depth including, watering, ramming consolidating and dressing complete lead up to 50 m and lift up to 1.5

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level 1:5:10 (1 Cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) cement brand will be ACC, CCI, Ambuja, JP, Bangar, Birla Plus, L&T

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size) over 75 mm bed by dry brick ballast 40 mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth

Random rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with : Cement mortar 1:6(1 Cement : 6 coarse sand)

Providing and fixing up to floor V level precast cement concrete solid block incl. hoisting and setting in position with cement mortar 1:3(1cement : 3 coarse sand), cost of required centering shuttering and finishing smooth with 6 mm thick cement plaster 1:3(1cement : 3 coarse sand )on exposed surface complete. Cement Ordinary portland 43 grade conforming to IS No: 8112- 1989 brand like CCI, ACC, Ultratech, Vinay, Star, JP, Ambuja, Binani only. 1:3:6 (1 Cement :3 coarse sand: 6 stone aggregate 20mm nominal size)

Centering and shuttering incl. strutting, propping etc and removal of form work for Lintel, beam, plinth beam, girders bressumers and cantilevers

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts, etc. upto floor five level excluding cost of centering, shuttering, with 1:1.5:3 (1 Cement : 1.5 coarse sand: 3 graded stone aggregate 20 mm River single/Hand broken) for RCC Pillars . Cement Ordinary Portland 43 grade conforming to IS No: 8112- 1989 brand like ACC, Ultratech, Vinay, Star, JP or equivalent brand as approved by Engineer in charge

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete . MS Bar deformed TMT bars , conforming to IS 1786-1985 of make Tata, Amba, Tiscon, Paras , Rhino Thermo- Mechanically Treated or cold twested MS bars.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position- with First class wood (surai/ kail/assam teak/ Hollock) Local wood.

Providing and fixing panelled or panelled and glazed shutters doors, windows and clerestory windows including ISI marked black enameled M.S. butt hinges with necessary screws (screws should be of stainlesss steel and brand Magnum/ Nettlefold/Amul) excluding, panelling which will be paid for separately (Thickness of shutters should be 35mm) - first class local wood (surai/ kail/assam teak/ Hollock) conforming IS- 399:1963 (Weight of should be 545 Kg/ M3) Note The shutters should be conforming IS 1003 (Part-2): 1994 Local wood conforming I:S-399:1963 (Weight of wood should be 545Kg. Per Cum. 35 mm thick shutters.

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or paneled and glazed shutters 25mm to 40mm thick- First class local wood (surai/ kail/assam teak/ Hollock) (i)Local wood panells should be fixed only with grooves but additional beading should be provided on both sides, stiles, rails and panels in door shutters shall be of the same species of timber. (ii) Lock rail of door shutters shall be so placed that its centerline is at a height of 850+ 55mm from the bottom of shutters, each door shutters shall be fixed to the frame with three hinges one at the center and other two at 200 mm from top and the bottom of the shutters (iii) All door shutters shall be finished smooth with well planed faces and panels of shutters shall be flat and well sanded to a smooth and level surface. (Iv) In case of double leaved shutters the meeting of the stiles shall be rebated either splayed or square type. (V) Each window shutters shall be fixed to the frame with two hinges so that bottom hinge is at 15 Cm from the lower end of shutter and upper hinge is at 10 CM from the upper end of the shutters (vi) Ventilator shutters to be fixed to its frame with two hinges at quarter points or top rail. Local wood conferming I:S-399:1963(Weight of wood should be 640 Kg. Per Cum.

Providing and fixing glazed shutters for door, window and ventilators using 4mm thick float glass pans of brand Modi float, Atul, Saint Gobain, golden only. Weight of glass pan should be 10.00 kg/sqm. Including black enameled ISI mark Butt hinges with necessary screws.(screws should be of stainless steel and brand Magnum/ Nettle fold/Amul) First class local wood (surai/ kail/assam teak/ Hollock) -35mm thick

Providing wood work in frames of false ceiling, partition and other frames fixed in position- with First class local wood (surai/ kail/assam teak/ Hollock) Firstclass local wood (surai/ kail/assam teak)

Providing and fixing insulating board ceiling of approved quality with necessary nails etc. complete (frame work to be paid separately) : 9 mm thick plywood.

Providing and fixing Anodized Allum Sliding bolts with nut and screws 250x16mm conforming to IS 2681-1979 of brand Classic/EPSA ISI/Décor/Venus /Adersh /crown ( anodic coating not less than grade AC 10 as per IS : 1868 ) 250x16 mm

Providing and fixing Anodized Allum Tower Bolt 200x10mm conforming to IS 204 of brand conforming to IS 2681-1979 of brand Classic/EPSA ISI/Décor /Venus /Adersh /crown ( anodic coating not less than grade AC 10 as per IS : 1868 ) 100x10mm

Providing and fixing Anodized Allum Handles 125mm IS 208 of brand Classic/EPSA ISI/Décor/Venus /Adersh /crown ( anodic coating not less than grade AC 10 as per IS : 1868 ) 125mm.

Steel work in built up tubular trusses including cutting, hosting fixing in position and applying a priming coat of approved steel primer welded and bolted including special shaped washers etc. Complete. Hot finished welded type tube.

Providing and fixing pre coated galvanized iron profile sheets 0.50mm(+.05%) total coated thickness with zinc coating 120 gm per sqmtes as per IS:277, in 240 mpa steel grade 5-7 micron epoxy primer on both sides of the sheets and polyester top coat 15-18 microns. steel should have protective guard film of 25 micron minimum to avoid scratches during transportation and should be supplied in single length up to 12 mtrs or as directed by engineer in charge. The sheet shell be fixed by using self drilling / self tapping screws of size 5.5x55 mm with EPDM seal complete up to any pitch in horizontal/ vertical or curved surface, excluding cost of perlis, rafters,trusess etc. including cutting to size and shape wherever required. GS sheet will be brand TATA, SAIL, or equivalent

Providing and fixing pre coated galvanized iron profile sheets 0.50mm(+.05%) total coated thickness with zinc coating 120 gm per sqmtes as per IS:277, in 240 mpa steel grade 5-7 micron epoxy primer on both sides of the sheets and polyester top coat 15-18 microns using self drilling / self tapping scerww of size 5.5x55 mm

Providing and fixing GI pipe midium class make TATA, Jimdal Hissar, JST, Surya with GI fitting of Unik and intillo techsupport clamp U-clamp of size 23x1x2.5mm of chilly incl. cutting and making good the walls etc ( Internal work) Exposed on wall 15 mm dia nominal bore.

Providing and fixing CP brass long body bib cock 15 mm dia of make Parko/Kingstone/Essco confirming to IS:8931

Providing and fixing CP brass stop cock 15 mm dia ( concealed) of make Parko/Kingstone/Essco confirming to IS:8931

Providing and fixing water closet squatting pan ( Indian type W.C. pan ) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, Parryware/Hindware/Seabird/Orient (Coral) with all fittings and fixtures complete including cutting and making good the walls and floors wherever required. White Vitreous china Orissa pattern W.C. pan.of size 580x440mm with integral type foot rests .

Providing and fixing wash basin of make Hindware, Perryware, Cera standerd quality size 550x400mm with CI/MS bracket, 15 mm CP brass pillar tape , L&K,, Kingston, Renutrol, Hansa, 32mm CP brass waist of L&K,, Kingston, Renutrol, Hansa, including painting of fittings and brackets, cutting and making good the walls wherever required.

Providing and fixing mirror of superior glass of approved quality with plastic moulded frame of approved make and shade with 6mm thick hard board backing. Rectangular shape 453x357mm

Providing and fixing soil waste and vent pipes 100 mm dia of brand RIF, SRIF, NECO 100 mm dia Centrifugally cast spun iron socketed pipe as per IS:3989 PVC Pipe.

Constructing Stone masonry man holes in cement mortar 1:4 (1 cement:4 coarse sand) RCC top slab with 1:2:4 (1cement: 2 coarse sand: 4 stone aggregate 20mm nominal size) foundation concrete 1:2:4 (1cement: 4 coarse sand: 8 stone aggregate 40mm nominal size) mix, inside plastering 12mm thick with cement mortar 1:3 (1 cement:3 coarse sand) finished with floating coat of neat cement and making a channels in cement concrete 1:2:4 (1cement: 2 coarse sand: 4 stone aggregate 20mm nominal size) finished with as floating coat of neat cement as per standard design. Cement brand CCI, ACC, Ultratech, Vinay, Star, JP, Ambuja, Binani only. Inside size 90x80x45 cm including CI cover with frame 455x610 mm internal dimensions total weight of and frame to be not less then 38kg ( weight of cover 23 kg and weight of frame 15kg)s with FPS bricks (PCC block) with class designation 75

Constructing masonry chamber for u/g CI inspection chamber with stone work in cement mortar 1:4 (1 cement:4 coarse sand) CI cover and frame 455x610 mm internal dimensions and weight not lessthen 38.00kg( weight of cover 23 kg and weight of frame 15kg) RCC top slab with 1:2:4 (1cement: 2 coarse sand: 4 stone aggregate 20mm nominal size) foundation concrete 1:5:10 (1cement: 5coarse sand: 10stone aggregate 40mm nominal size) mix, inside plastering 12mm thick with cement mortar 1:3 (1 cement:3 coarse sand) finished with floating coat of neat cement and making a channels in cement concrete 1:2:4 (1cement: 2 coarse sand: 4 stone aggregate 20mm nominal size) finished with as floating coat of neat cement as per standard design Cement brand CCI, ACC, Ultratech, Vinay, Star, JP, Ambuja, Binani only. Inside dimensions 455x610 and depth 45 cm for pipe line with one or two inlets.

Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks of class designation 75/stones and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. With F.P.S. bricks/stone (PCC block)

Providing and applying plastering on walls 20 mm thick of mix 1:6 ( 1cement :6 coarse sand)

Distempering with oil bound washable distemper of brand Asian, Berger, Nerolac, Shalimar Tractor to give an even shade over new work two or more coats and including priming coat of cement primer for inner walls Approx 55%of plastered area as measured of plaster.

Finishing walls with acrylic smooth exterior paint of APEX, Asian, Berger, Nerolac, Shalimar of required shade on new work two or more coats applied @ 1.67 ltrs/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/10 sqm. Approx 45% of plastered area as measured of plaster.

Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/ 10 sqm of approved brand or manufacture

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank [Sintex, Electroplast, Star, Lotus or equivalent having valid ISI license ].

Cement concrete flooring 1:2:4 ( 1 cement: 2course sand: 4 graded stone aggregate) finished with a neat cement floating coat, incl. Cemnt slurry, but excluding the cost of noising of steps etc complete. 40 mm thick with 20 mm nominal size stone aggregate

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacture), of approved make, in all colours, sheds except burgundy, bottle green, back of any size as approved by Engineer - in - charge, in skirting, risers of steps and dedos, over 12 mm thick bed of cement mortar 1:3 (1 Cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in while cement mixed with pigment of matching sheds complete.

Wiring for light point/ fan poiunt/ exhaust fan point/ call bell point with 1.50 sq.mm FR PVC insulated copper conductor single core cable in surface/ recessed steel conduit, with modular switch, modular plate, suitable GI Box and earthing the point with 1.5 sqmm. FR PVC insulated copper conductor single core cable etc. as required. Group A

Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. 2x2.5 sqmm+1x2.5 sqmm earth wire.

Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 amps

Supplying and fixing following rating, double pole, MCB DB complete with connections, testing and commissioning etc. as required. 06 amps MCB

KAILASH CHANDRA UPRETI

shamsher singh saun