Construction of Cattle shed at Chandrahaia, Bariya, Harijan Basti near ICAR MGIFRI, Motihari

Amount

Sub Heading 1

Earth work in excavation by mechanical means (Hydraulic excavator )/Manual means in foundation trenches or drains (not exceeding 1.5m in width or 10sqm on plan ), including dressing of sides and ramming of bottoms, lift up to 1.5m including getting out excavated soil and disposal of surplus excavated soil as directed with in a lead of 50 m All kinds of soil

Providing and laying in position cement concrete of specified grade excluding the cost of shuttering and centring 1:2:4 (1 cement :2 coarse sand: 4 graded stone aggregates 20mm nominal size)

Dry brick on edge flooring in required pattern with bricks of class designation 7.5 on a bed of 12mm mud mortar, including filing joints with sand, with common burnt clay non modular bricks.

Reinforce cement concrete work in wall (any thickness) including attached plasters, buttresses, plinth and string courses fillets, columns, pillars, piers, abutments, post and struts etc. Above plinth level up to floor five level excluding the cost of cantering, shuttering, finishing and reinforcement 1:1.5:3 4 (1 cement :1.5 coarse sand: 3 graded stone aggregates 20mm nominal size)

Bick work with common burnt clay F.PS (non modular) bricks of class designation 7.5 in super structure above plinth label up to floor V level in all shapes and sizes in cement mortar 1.6 (1 cement : 6 coarse sand )

Half brick masonry with common burnt clay FPS (non modular) bricks class designation 7.5 in super structures above plinth level up to floor five level with cement mortar 1: 3 (1 cement : 3 coarse sand)

15 mm cement plaster on the rough side of single of half brick wall of mix: 1:4 ( 1cement :4 fine sand )

15mm cement plaster of half brick wall finished with a floating coat of neat cement of mix 1:3 (1 cement : 3 fine sand)

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hosting, fixing in position and applying a priming coat of approved steel primer all complete.

Supplying and fixing welded steel wire mesh 25x25mm 10 Gauge, painted with two are more coats of enamel paint of approved shade over a coat of primer.

Providing and fixing 1mm thick M S Sheet door with frame of 40x40x6mm angle iron and 3mm M S gusset plates at the junctions and corners, all necessary fitting complete, including applying two coats of synthetic enamel paint over one coat of steel primer. Using flats 30 x 6mm for diagonal braces and central cross piece

Steel reinforcement for R.C.C work including straightening, cutting bending, placing in position and binding all complete in mild steel and medium tensile steel bars.

Providing corrugated G.S sheet roofing including vertical and curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I limpet washers or with G.I limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paints on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces) 0.80 mm thick with zinc coated not less than 275gm/m2

Providing ridges or hips of width 60 cm over all width plain G S sheet fixed with polymer coated J or L hook bolts and nuts 8mm dia G I limpet and bitumen washer complete

Supplying and fixing bolts with nuts & washers (M16x500mm)

Centering and shuttering including strutting, propping etc. and removal of form for all heights in suspended floors , roofs landing, balconies and access platform, columns etc.

Colour washing such as green, blue or buff to give an even shed on new work (two are more coats) with a base coat of white washing with lime.

Goods and Service Tax

Jitu Kumar

SHYAM KUMAR