Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹12.4 LAccepted-Finance | L1 | Accepted-Finance L1 | |
| 2 | L2₹13.0 L+₹59,370 (4.79%)Rejected-Finance | L2 | Rejected-Finance Not L-1 | |
| 3 | L3₹16.1 L+₹3.7 L (29.9%)Rejected-Finance MAGHAM RAMAPURAM LANE MUKKOLA P O TRIVANDRUM 695 044 | TRIVANDRUM | THIRUVANANTHAPURAM | KERALA | 695044 | L3 | Rejected-Finance Not L-1 |
Tender Value
₹15 L
EMD Value
₹30,000
Closing Date
26 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Army Trivandrum
Office of Garrison Engineer Army, Thirumala Post, Trivandrum-695006.
REPAIRS TO DAY TO DAY ESSENTIAL B/R COMPLAINTS IN OTM/ MD ACCN AREA UNDER GE (ARMY) TRIVANDRUM
2023_MES_599746_1
8111/E8
Open Tender
Civil Works
Item Rate
180 days
GE Army Trivandrum
As per NIT
8 documents required · 8 mandatory
₹500
GE Army Trivandrum
₹30,000
Yes
20 Jul 2023
31 May 2023
3 Jul 2023
31 May 2023
26 Jun 2023
14 Jun 2023
1 Jun 2023 - 6 Jun 2023
Amount
Repairs to leakage in Bib taps, pillar taps, stop cocks, single valve of any description by changing the washer, etc complete all as specified and directed. Note: All works under this BOQ shall be executed for buildings of height up to four storeys. Contractor shall make all necessary proper scaffolding arrangements and safety measures for labours at site.
Removal of air lock/ blockage of water in GI/ PVC tubing 15 mm/ 20 mm bore, cleaning the pipe or fittings etc and refixing the same in position complete all as specified and directed.
S&F in repairs bib tap cast copper alloy, chromium plated, with crutch or butterfly handle, screwed down, screwed for 15mm bore dia iron pipe/ PVC pipe or for brass ferrule complete all as specified and directed.
S&F in repairs bib tap cast copper alloy, chromium plated, fancy type, with crutch or butterfly handle, screwed down, screwed for 15mm bore dia iron pipe/ PVC pipe or for brass ferrule complete all as specified and directed.
S&F in repairs 15 mm bore dia Bib tap standard of PTMT (Minimum weight 90gms), any colour, high pressure screwed for iron/ PVC pipe complete all as specified and directed.
S&F in repairs pillar taps, brass, chromium plated, fancy type, screwed down high pressure, with long screwed shanks and fly-nuts screwed for 15mm bore dia iron pipe complete all as specified and directed.
S&F in repairs 15 mm bore dia Pillar taps of PTMT (Minimum weight 110gms), any colour, high pressure screwed for iron/ PVC pipe complete all as specified and directed.
S&F in repairs angle cock, cast copper alloy, chromium plated, fancy type screwed down, high pressure, with crutch or butterfly handle, screwed both ends for 15mm bore dia PVC/ iron pipe or for unions complete all as specified and directed.
S&F in repairs angle cock/ stop valve cast copper alloy, chromium plated, fancy type screwed down, high pressure, with long shank and cup screwed both ends for unions and fixed for 15mm bore dia of pipe complete all as specified and directed.
S&F in repairs 32mm dia PVC waste pipe 60 cm long with union for WHB complete all as specified and directed.
S&F in repairs 40mm dia PVC waste pipe 60 cm long with union for sink complete all as specified and directed.
S&F suitable sizes of spindle/ internal fittings suitable for all types of existing taps and valves (Bib taps/ Angle valves/ stop valves) complete all as specified and directed.
S&F in repairs health faucet, brass, chromium plated including flexible PVC pipe with steel lining of 1 mtr long, chromium plated, with push button suitable for 15mm pipe complete all as specified and directed.
S&F in repairs wash basin, vitreous china (flat back), size 550 mm x 400 mm, white including cutting for and pinning in ends of brackets or erecting stand with waste pipe complete all as specified and directed.
S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white including fixing bolt, seat cover (excluding flushing cistern and flush pipe) including connection to drain (or outgoing pipe) and to flushing pipe, anti syphonage etc complete all as specified and directed.
S&F in repairs waste fittings, brass, chromium plated 32 mm dia for wash hand basin, glazed ware sinks etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end complete all as specified and directed.
S&F in repairs waste fittings, brass, chromium plated 40 mm dia for stainless steel sink etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end complete all as specified and directed.
S&F 15mm bore dia UPVC pipes as per ASTM-1784 Sch 80 class III and all fittings fixed complete to walls, ceiling or in floors etc, including taking up or down old unserviceable steel tubing/ PVC pipes and connections including using of necessary scaffolding complete all as specified and directed.
S&F 20mm bore dia UPVC pipes as per ASTM-1784 Sch 80 class III and all fittings fixed complete to walls, ceiling or in floors etc, including taking up or down old unserviceable steel tubing/ PVC pipes and connections including using of necessary scaffolding.
S&F 25mm bore dia UPVC pipes as per ASTM-1784 Sch 80 class III and all fittings fixed complete to walls, ceiling or in floors etc, including taking up or down old unserviceable steel tubing/ PVC pipes and connections including using of necessary scaffolding complete all as specified and directed.
Repairs/ adjustment to washer/ syphon float/ valve etc for high level or low level flushing cistern and making functional complete all as specified and directed.
S&F in repairs plastic water closet seat cover, any colour, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.
S&F in repairs 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and connection to flush pipe complete all as specified and directed.
S&F in repairs PVC syphon with handle, with internal fittings complete for low level flushing cistern complete all as specified and directed.
S&F in repairs cast copper alloy, chromium plated grating doom 125 mm dia with waste hole and making good to floor complete all as specified and directed.
S&F in repairs cast copper alloy, chromium plated grating doom 100 mm square shape, fancy type, with waste hole and making good to floor complete all as specified and directed.
S&F in repairs PVC connections 15mm size, 450mm length with 02 Nos brass check nuts with washer etc complete all as specified and directed.
S&F in repairs vitreous China squatting pan, 'Orissa' pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor complete all as specified and directed.
S&F 50mm bore dia PVC (SWR) pipes single socketed in any length with rubber ring joints and all fittings laid in trenches or in floors or fixed to walls including taking up or down existing cast iron pipes/ PVC pipes including all fittings by burning out lead joints etc to facilitate dismantling old serviceable fittings/ pipes laid in trenches, floors or fixed to walls all as directed including earth work, demolition of PCC/ Brick work and making good to match with existing surfaces including necessary scaffolding complete all as specified and directed.
All as per Sl No. 30.00 here-in-before, but 75mm bore dia complete all as specified and directed.
All as per Sl No. 30.00 here-in-before, but 110mm bore dia complete all as specified and directed.
All as per Sl No. 30.00 here-in-before, but 160mm bore dia complete all as specified and directed.
S&F in repairs PVC (SWR) branch piece, single (Single Y) equal or unequal for 110mm bore dia pipe complete all as specified and directed.
S&F in repairs PVC (SWR) junction, single (Single T) equal or unequal for 110mm bore dia pipe complete all as specified and directed.
S&F in repairs PVC (SWR) branch piece, single (Single Y) equal or unequal for 75mm bore dia pipe complete all as specified and directed.
S&F in repairs PVC (SWR) junction, single (Single T) equal or unequal for 75mm bore dia pipe complete all as specified and directed.
S&F in repairs PVC (SWR) bends any radius for 110mm bore dia pipe complete all as specified and directed.
S&F in repairs PVC (SWR) bends any radius for 75mm bore dia pipe complete all as specified and directed.
M&L for PVC (SWR) floor trap 75mm outlet dia., plain with grating including jointing with solvent cement and removing old trap and making good to floor complete all as specified and directed.
M&L for PVC (SWR) multi floor trap 75mm outlet dia., with grating including jointing with solvent cement and removing old trap and making good to floor complete all as specified and directed.
S&F in repairs 25 mm dia stainless steel curtain rod fixing with stainless steel brackets complete all as specified and directed.
S&F in repairs brass, chromium plated shower rose 125 mm size with or without swivel joints including fixing to steel/ PVC pipe or union complete all as specified and directed.
S&F in repairs to worn out wooden pelmet boxes or cupboard shutter of 18/19 mm thickness block boards, grade 2 quality, interior grade, commercial type, fixed with MS clips, screws and second class hardwood plugs 30x30x40mm embedded in wall with cement mortar (1:3) complete all as specified and directed.
S&F 75 mm long size aluminium handles, cast type, anodised complete all as specified and directed.
Taking down of cement plaster, any description, including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
M&L for rendering 10 mm thick cement plaster on fair faces of brick work/concrete surfaces in cement mortar 1:6, finished even and smooth without using extra cement complete all as specified and directed.
M&L for rendering 15 mm thick cement plaster on fair faces of brick work/concrete surfaces in cement mortar 1:4, finished even and smooth without using extra cement complete all as specified and directed.
M&L for 5mm thick rendering in cement mortar 1:3 on fair faces of concrete surfaces as in ceiling finished fair and smooth without using extra cement etc complete all as specified and directed.
M&L for applying three coats of white wash on ceiling, including preparation of new plastered surfaces complete all as specified and directed.
M&L for applying two coats of distemper oil emulsion over a coat of primer including preparation of wall surfaces complete all as specified and as directed.
M&L for applying two coats of acrylic exterior emulsion water proofing painting over a coat of primer including preparation of new surfaces of external walls as per manufactures instructions complete all as specified and directed.
S&F in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples or wooden beading complete all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or steel frames glazed with putty or fixed with beads complete all as specified and directed.
S&F 3mm thickness sheet glass, ordinary quality and glazing with wooden beads or oil putty in square not exceeding 0.50 Sqm in each pane complete all as specified and directed.
S&F 3mm thickness figured glass, pin head type and glazing with wooden beads or oil putty in square not exceeding 0.50 Sqm in each pane complete all as specified and directed.
S&F in repairs corner glass of size 200 mm x 200 mm, fancy type with stainless steel frame and fixed to walls with screws complete all as specified and directed.
S&F in repairs brass, chromium plated toilet paper holder fancy type screwed down for fixing to walls with screws complete all as specified and directed.
S&F in repairs brass, chromium plated, fancy type, hand shower with push button suitable for 15mm pipe complete all as specified and directed.
S&F in repairs PVC mirror cabinet of size 450 x 300 x 100 mm, ivory colour, fixed to walls complete all as specified and directed.
S&F brass chromium plated tubular towel rail, 20 mm dia, D type 60 cm long between flanges complete all as specified and directed.
S&F in repair aluminium alloy, anodised, sliding door bolt length 300mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.
S&F in repairs aluminium (extruded section body) door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed.
S&F in repairs 200 mm long aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.
M&L for granite slab 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding, polishing and including 15 mm thick screed bed in CM 1:4, including demolition existing damaged finish/ slab complete all as specified and directed.
Demolition of cement concrete (unreinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level) complete all as specified and directed.
M&L for 40 mm thick, PCC 1:2:4 type B-1, using 20mm graded granite stone aggregates as in flooring, paving finished surface even and smooth without using extra cement complete all as specified and directed.
M&L for glass dividing strips, 3mm thick and 38mm width complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M&L for 15 mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes complete all as specified and directed.
M&L for rendering 10 mm thick cement plaster on fair faces of brick work/ concrete surfaces in cement mortar 1:4 as screed complete all as specified and directed.
M&L for non-skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular ) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc, set and jointed neat cement slurry and pointed with coloured cement to match complete all as specified and as directed.
M&L for non-skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular ) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc, set and jointed neat cement slurry and pointed with coloured cement to match complete all as specified and as directed.
M&L for glazed ceramic coloured tiles of size 300x200x7mm thick as in skirting, dados, etc. set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and as directed.
Demolition of brick work/ PCC block / stone walls built in cement mortar including all quoins, arches, pillars and removing the debris/ rubbish to a distance not exceeding 100 mtr complete all as specified and directed.
M&L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 and brought up to course complete all as specified and directed.
All as per SI item No. 76 here-in-before, but except stones complete all as specified and directed.
Extra over Granite or Trap stone walling for hammer dressing to face stones and dressing of face beds not exceeding 40 mm and joints, as specified, of random rubble walling, uncoursed or brought upto courses complete all as specified and directed.
M&L for flush pointing in cement mortar 1:4 to random rubble masonry, uncoursed or brought upto courses complete all as specified and directed.
M&L for pre-cast cement concrete block masonry type C1, 1:3:6 (using 20mm graded aggregate) with solid blocks exceeding 10 cm in width and setting in CM 1:4 complete all as specified and directed.
S&F in repairs Vitreous China Urinal, half stall type, white colour, including fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; complete all as specified and directed.
S&F in repairs 100 mm long cold rolled mild steel butt hinges, medium weight complete all as specified and directed.
S&F in repairs 75 mm long cold rolled mild steel butt hinges, medium weight complete all as specified and directed.
S&F in repairs floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, (overall length of cover plate 140mm) fixed in floor complete all as specified and directed.
Taking down wooden shutters of any description exceeding 1 sq.m and not exceeding 2 sq.m each and refixing in same opening after carry out necessary repair work including easing and adjusting and also refixing builders hardware as required including renewal of unserviceable screws, etc complete all as specified and directed.
Repairs to WC joints or similar joints filling with white cement and wet set (M seal) epoxy putty of Pidilite to stop leakage and finished properly complete all as specified and directed by Engr-in-Charge.
S&F in repairs brass, chromium plated, fancy type, hand shower including flexible PVC pipe with steel lining of 1.50 mtr long, chromium plated, with push button suitable for 15mm pipe complete all as specified and directed.
S&F in repairs sinks with drainage board made of stainless steel 1mm thick, overall size 915mm x 460mm, bowl size 410mm x 330mm x 160mm, kitchen with plugs, washers and wastes pipes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting unions to pipe complete all as specified and directed.
S&F in repairs sinks without drainage board made of stainless steel 1mm thick, overall size 495mm x 420mm, bowl size 410mm x 330mm x 160mm, kitchen with plugs, washers and wastes pipes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting unions to pipe complete all as specified and directed.
S&F in repairs stainless steel plate rack of size 90x78x23cm using 1mm thick sheet, standard pattern complete all as specified and directed.
S&F in repairs brass CP mixer, fancy type for mixing hot and cold water screwed down for 15mm bore dia. iron pipe complete all as specified and directed.
Taking down and refixing WHB or sink of any size using new rack bolt/ brackets in same locations complete all as specified and directed.
S&F 4 mm thick non-asbestos fibre cement building boards fixed or laid/ inserted to timber/ GI/ Aluminium frame work with screws on ceiling, including taking down existing damaged boards complete all as specified and directed.
SHILPA ENGINEERS AND CONTRACTORS
B.LAMBODHARAN
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .