PROVN OF VEHICLE PARKING SHED FOR JCOs / ORs MD ACCN IN ARMY AREA JODHPUR UNDER GE (ARMY) NO. 02

Amount

Surface excavation not exceeding 30cm and averaging 15 cm deep and getting out in any type of soil, complete all as specified and as directed .

Removing excavated materials to a distance not exceeding 50m depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed .

Excavating in post holes or similar holes each not n exc 0.50 cu.m,getting out any type of soil,returning,fillig in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm complete all as specified and as directed.

M&l for Hardcore of gauge not exceeding 63 mm of broken stone or boulders, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface with 8-10 tonnne power roller, complete all as specified and as directed.

M&L plain Cement concrete 1:3:6 type C-2 by using 40mm graded crushed stone aggregate as in foundation filling and mass concrete,complete all as specified and as directed.

M&L 75 mm thick plain Cement concrete 1:3:6 type C-2 by using 40mm graded crushed stone aggregate as in floor/hard standing complete all as specified and directed by Engineer-in-charge.

M&L for rolled mild steel Roof trusses (framed), trussed, verticle post, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc., and similar work confirming to Fe-410 W Gde E-250 complete all as specified & directed.

M&L Prepainted Galvalume Aluminium Zinc Coating GI based corrugated Steel Sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws, complete all as specified and as directed.

M&L preparation of new or previously untreated steel surface of any description, over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over & INCLUDING M&L SINGLE coat of red- oxide, zinc chrome primer complete all as specified and as directed.

Supply and laying machine pressed / factory made chamfered edge cement concrete rubberised interlocking paver block, 60mm thick with 6 mm thick top layers of anti abrasive material of M-35 grade with any colour, design & pattern, & size/ shape, as approved by GE as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness made by table vibratory method using PU mould, laid in required colour & pattern over and including M&L 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified and directed.

Supply and laying machine / factory made kerb stone of M-25 grade,at or near ground level, cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required, complete all as specified and directed.

M & L for PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in flooring benching to drain, coping etc and the like edge slightly rounded or chamfered including necessary use and waste of form work complete all as specified and as directed.

HINDUSTAN TRADING COMPANY

Nikhat nirman

Harsh Enterprises

BEYLIM INFRA

shree technology

Pawan Kumar Shrama Contractor

Megh Raj Gehlot

GANGADHAN ENTERPRISES

suryabuildtechdevlopers

RISING ELECTRICALS

M/s M A TRADERS