Renovation and Interior Fit out work of SIDBI Branch office at Sachin GIDC

11 Grand Total 64,58,237.25

S NO DSR/MR DESCRIPTION QUANTITY UNIT RATE AMOUNT AMOUNT

DSR RATE NON DSR

1 FLOORING WORKS

ALUMINIUM SKIRTING: Supply of 100mm Aluminium (Grade 6063) Skirting with 15 micron anodising In Natural Finish. Thickness 1.30 to 1.50mm. Designed

to conceal screws. Seamless finish. Complete with Rubber/ PVC Jointers and Gasket.

1.02 MR Supplying and fixing of 3mm Luxury vinyl flooring Top layer of approved design & Pattern as per architects approval & Instructions 120.00 sq m 1650.00 1,98,000.00

CARPET TILES: Providing and laying carpet tile flooring. Carpets shall be of Type 6 nylon loop pile carpet tiles/Plank. The carpet shall have sufficient gauge (1/10 ~ 1/12) with sufficient stitches

(10~13) per inch. The carpet shall be solution dyed fibre content or with injection printing technology. The carpet shall have the pile height ranging from (2.0 ~ 3.0) mm with average

density higher than 4500 Oz/ cubic yard. The total thickness of the carpet tile shall also range from

LAMINATED WOODEN FLOORING Providing and laying 8.3mm thick AC5 grade laminate wooden flooring having good castor chair and furniture resistance strength. Plank dimension to be

1215x195x8.3mm with valinge clock locking system and wax coating for better sound resistance. Impact and abrasion resistance to be of high grade having class EN 13329. The flooring shall

be laid with 2mm thick underlay and PVC sheet and prevent against moisture and foot taping sound. The item also includes the skirting and any other profiles required for proper

installation.or its equivalent specifications or as per the selection of client and items shall be complete in all respects. or its equivalent specifications/ size as per the site requirement or as per

the selection of client and items shall be complete in all respects.

2 FALSE CEILING WORKS

GYPSUM BOARD CEILING: Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets

and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and

37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of

25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm

centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre,

shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing

perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with

25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c,

including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3

layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings

for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but

excluding the cost of painting with

12.45.1 12.5mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks) 96.00 sq m 1355.80 130156.80

Providing & fixing of Silhoutee Frame ceiling tile in size 600x600x15mm having noise reduction co-efficient of 0.7, Density of 100 kg / m3, and Humidity resistance of 95% to be laid on exposed

grid system with white wrap comprising main runner 3.00 mm x 24mm web height cross tee 1.2 mtrs x 24 mm web height and 0.6 mtrs x 24 mm web height. The wall angle shall be 3.0 mtrs.

3 PARTITIONS AND WALL CLADDING - -

Digitally signed by AMIT

WALL PANELING :-Providing and fixing Paneling upto ceiling height consisting of Aluminium frame and required board, frame work made of Aluminium section made of 50x25 mm ,

consisting of floor and ceiling channel 50mm wide having equal flanges of 25 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash

fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36

mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of

studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of

frame work by 25 mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre. The boards are to be fixed to the frame work with joints

staggered to avoid through cracks, M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5 mm each) to be provided at the horizontal joints of two boards, fixed to

the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corners (25 mm x

25 mm x 0.5 mm), joint finisher as per manufacture's specification and direction of engineer in charge all complete.(Cost of Aluminium framing 600X600mm Paid saperately)

Paneling with 11- 12 mm thick HDHMR board to IS: 5509 55.00 sq m 2,414.28 132785.4527

WALL PARTITION-Providing and fixing partition upto ceiling height consisting of Aluminium frame and required board, frame work made of Aluminium section made of 50x25 mm ,

consisting of floor and ceiling channel 50mm wide having equal flanges of 25 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash

fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36

mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of

studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of

frame work by 25 mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre. The boards are to be fixed to the frame work with joints

staggered to avoid through cracks, M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5 mm each) to be provided at the horizontal joints of two boards, fixed to

the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corners (25 mm x

25 mm x 0.5 mm), joint finisher as per manufacture's specification and direction of engineer in charge all complete.(Cost of Aluminium framing 600X600mm Paid saperately)

Both side 12 mm thick HDHMR board to IS: 5509 60.00 sq m 3450.00 207000

MR LAMINATE CLADDING- P/F 1mm thick laminate including 4 mm thick MDF, on an existing Plywood surface. 155 sq m 1,437.57 222822.82

Providing and fixing 12mm thick frameless toughened glass

door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary

holes etc. for fixing required door fittings, all complete as per direction of Engineer in charge (Door handle, lock and stopper etc. to be paid separately)

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia &

length (hold fast lugs or dash fastener shall be paid for separately).

9.1.1 Second class teak wood 0.25 cum 142949.7 35737.43

Providing and fixing partition top beading 80x12 mm, including cutting, shaping, adhesive/fastener fixing, edge finishing, surface preparation, and applying polish with matching finish,

complete in all respects as per site requirement and engineer-in-charge directions.

Digitally signed by AMIT

INSULATION- Providing and fixing thermal insulation with Resin Bonded rock wool conforming to IS: 8183, having density 48 kg/m3,50 mm thick,wrapped in 200 G Virgin Polythene

Bags fixed to wall wirh screw, rawel plug & washers and held and in position by criss cossing GI wire etc. complete as per directions of Engineer-in-Charge.

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched

commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:

9.21.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws 12 sq m 2,392.65 28711.80

Providing and fixing aluminium extruded section body tubular type universal HS 3000 Slimline Concealed Door Closer (having brand logo with ISi, IS : 3564,embossed on the body, door

weight upto 36 kg to 80 kg and door widthfrom 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete

Providing and applying panelling/partition with matching colour groove finish and polishing, including all materials, labour, surface preparation, fixing accessories, edge finishing, sanding,

colour matching, groove cutting, polishing coats, and complete finishing as per site requirement and engineer-in-charge directions.

Providing and fixing aluminium sub-frame made from aluminium section 50 mm × 25 mm × 1.5 mm thick, including cutting, fabrication, alignment and fixing in position for partition/paneling

works. The job includes all necessary screws, fasteners, rawl plugs, spacers and other accessories required for proper installation. Complete as per drawing, specification and direction of the

MR engineer-in-charge. 50 sq m 1,050.00 52,500.00

TOWER BOLTS:- Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic AC 10 as per IS : 1868 ), transparent or dyed to required colour or shade, complete:

9.82 DOOR STOPPER:- Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.

MR MORTICE LOCK AND LEVER HANDLES- Providing and installing Tubular Handle TH 123 with Roses & Escutcheon in SS packaged with Mortice lockset 55mm backset, 20 SS forend, SS

strike plate and EP Cylinder for all flush doors. 6 EACH 2,650.00 15,900.00

MR Providing and fixing 600 mmx25 mm H Type handle for Doors approved make and designs as per engineer in charge

MR Providing and fixing minimium 70-90 kg capacity flooor spring for Doors approved make and designs as per engineer in charge

MR Providing and fixing Glass door lock approved make and designs as per engineer in charge

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture,

including applying additional coats wherever required to achieve even shade and colour.

13.83.2 Two coats

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content.

13.85.1 With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre

13.99 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :

13.99.1 One or more coats on old work. 40 102.8

Digitally signed by AMIT

BLINDS Providing & supplying of Window Blinds as per the approved sample in required shade and style consisting, of ZEBRA BLINDS comprising of optima screen Fabric comprising of

22% polyester, 78% PVC, Fabric weight 460-480G weight per sq m, Thickness 0.67 mm, Yarn count 18- 19/cm, having fire resistance standard – NFPA 701-89 small testing ISO- 5659-2 .Thetear

resistance should be complying to ISO4674 & breaking resistance – ISO 5081. The DRIVE UNIT shall be of clutch for quick, easy and safe installation, moulded plastic with steel spring support

and inserted into the tube end. It shall be driven by a ball chain pulley with ball chain and can be positioned at right side or left hand side of the Shade. The Shade when lowering or raising,

shall be automatically locked in position upon release of the ball chain by means of a built in friction lock.Universal clutch for left and right hand operation.Chain Gear Ratio of 1.75:1. The

END PLUG shall be molded of plastic witha steel location pin.The plug shall be inserted into the tube end.(Opposite to the Drive Unit) for ease of installation. The SUPPORT BRACKETS shall be of

coated steel & provided with covers and used in right hand or left hand positions differentiated by the acceptance of the of the rectangular drive unit support or the round idler plug

pin.Can beinstalled (a) On Face (b) Ceiling Mount (c) On Frame

(d) in Recess. The Bracket should be protruding outside maximum of

80mm.The ROLLER TUBE shall be of extruded aluminum with 37mm internal diameter & skin thickness of 1mm and shall incorporate a key way integral with the tube to accommodate the

spline. The BOTTOM RAIL shall be a Flat Bottom made up of powder coated steel. The BALL CHAIN shall be 2mm diameter cord with 4.5mm diameter acetal balls moulded co-axially to it on

6mm pitch to form an endless ball chain. It is used for raising or

M.R. FROSTEDFILM(CRYSTALQUALITY):-Providing and fixing scotchcal over glass surface as approval of the Architect. (Only film surface area shall be measured and paid).

Cabinet Shutters out of 19mm Commercial Plybaord finished in 1mm Laminate of matching, Shutters to be fixed to a frame. Rigidly fixed on both sides and top finshed in laminate. No

internal carcass required. All Hinges of hettich or equivalent. Internal Surface of the shutter in balancing white laminate. All shutters to be provided with Stainless steel louvers at the top and

bottom of the shutter as per the site requirements and instrcution of the Engineer In charge.

Providing & fixing Sidbi Signages & Logo & Sidbi Enviremoent Theme as per Direction of Engineer in Charge

M.R. One Way vision Film :-Providing and fixing scotchcal over glass surface as approval of the Architect. (Only film surface area shall be measured and paid).

Providing & fixing Sidbi Sign Glow Board For Exterior Acrylic Base Embeded Letter as per design

Providing and fixing pelmets to house projection screen / Blinds made of 19 mm thick commercial ply, having clear internal dimensions as 150/200 x 200/250mm, finished in approved

laminate on all exposed surfaces from all external surfaces and balancing laminate on all internal surfaces, supported from RCC ceiling slab by necessary framework, giving additional

supports in MS angles etc. complete. All exposed edges to be finished in 6mm thick TW beading and finished in approved colour.

GYPSUM PARTITIONING:- Providing and fixing partition upto ceiling height consisting of G.I. frame and required board, including providing and fixing of frame work made of

special section power pressed/ roll form G.I. sheet with zinc coating of 120 gms/sqm(both side inclusive), consisting of floor and ceiling channel 50mm wide having equal

flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable

anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within

flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to

wall with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by 25 mm long

dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre.

Digitally signed by AMIT

The boards are to be fixed to the frame work with joints staggered to avoid through cracks, M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5

mm each) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with

recommended jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x 0.5 mm), joint finisher and two coats of primer suitable for board as per

manufacture's specification and direction of engineer in charge all complete.

9.105.1 75 mm overall thickness partition with 12.5 mm thick double skin fire rated Glass Reinforced Gypsum (GRG)

plaster board conforming to IS: 2095: 30 sq m 2,131.10 63933

Cost index @ 1.03 on DSR 5,82,650.48

Modfied factor of GST on DSR @ 0.973 for considering GST @ 18% instead of 21.27 % 5,66,918.91 14,35,053.27

Digitally signed by AMIT

SCHEDULE OF QUANTITIES - ELECTRICAL WORKS

S NO DSR DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT TOTAL AMOUNT

S NO DSR DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT TOTAL AMOUNT

2022 DSR (INR) NON-DSR (INR)

A POINT WIRING

1.10 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC

insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular

switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated

copper conductor single core cable etc as required.

1.55 Wiring for group controlled (looped) light point/ fan point/call bell point (without independent switch

etc.) with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed PVC

conduit, and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single

core cable etc as required.

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable

in surface/ recessed medium class PVC conduit alongwith 1 No 4 sq. mm FRLS PVC

insulated copper conductor single core cable for loop earthing as required.

1.24 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box

including connections but excluding modular plate etc. as required.

1.24.4 3 pin 5/6 amp socket outlet Each 50 122.00 6100.00

1.24.5 6 pin 15/16 amp socket outlet Each 12 197.00 2364.00

A.5 1.26 Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding Each 1 40.00 40.00

modular plate as required.

1.27 Supplying and fixing following size/module, GI box along with Modular base & cover plate on

existing modular metal boxes etc. as required.

B SUBMAIN AND CONTROL WIRING

Digitally signed by AMIT

1.14 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated

copper conductor, single core cable in surface/ recessed medium class PVC conduit as required

1.14.1 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire Metre 190 233.00 44270.00

1.14.2 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire Metre 320 275.00 88000.00

1.14.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire Metre 20 439.00 8780.00

1.14.11 4 X 16 sq. mm + 2 X 6 sq. mm earth wire Metre 40 1365.00 54600.00

9.1 Supplying and making end termination with brass compression gland and aluminium lugs for

following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade

Supply of following XPLE armourned 1.1 KV grade conforming to I.S.7098/1554Aluminium

Conductor Cables :

MR Supply of following sizes of PVC sheathed PVC/XLPE insulated Aluminium conductor armoured cable of

C.2 1.1 KV grade conforming to IS:7098 part-1 / IS:1554 part-1 respectively & ISI marked.

(b) 3.5 C x 95 Sqmm XLPE cable RM 10 864.00 8640.00

(e) 3.5 C x 35 Sqmm XLPE cable RM 10 378.00 3780.00

C.3 MR Supply of following sizes of copper cables -PVC sheathed PVC/XLPE insulated Copper conductor

armoured cable of 1.1 KV grade conforming to IS:7098 part-1 / IS:1554 part-1 respectively & ISI marked.

(a) 4 C x 16 Sqmm XLPE copper cable RM 40 1446.00 57840.00

(b) 4 C x 25 Sqmm XLPE copper cable RM 10 2253.00 22530.00

D.1 2.11 Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. Each 10 13.00 130.00

D.2 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker

suitable for inductive load of following poles in the existing MCB DB complete with connections,

2.10 testing and commissioning etc. as required.

2.10.1 Single pole Each 40 256.00 10240.00

2.13 Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete

with connections, testing and commissioning etc. as required.

Digitally signed by AMIT

D.4 2.4 Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB

distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar,

earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But

without MCB/ RCCB/ Isolator)

D.5 MR 12 way (4 + 36), Double door Each 1 9081.00 9081.00

MR Providing and fixing 400mm wall mounted oscillating fan, heavy-duty type, 230V, 50Hz, single phase, with three-

speed control regulator, complete with suitable mounting brackets, clamps, bolts, nuts, and necessary wiring

connections from the nearest point using 1.5 sq.mm copper flexible wire, including testing and commissioning at

site, complete as required.( Make: Havells/Cromton/Usha/Bajaj asapproved by ingineer-in-charge)

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded

with fine tinned copper braid and protected with PVC sheath in the exisitng

E.1 1.19 surface/recessed steel/ PVC conduit as required Meter 60 47.00 2820.00

E.2 Supplying and fixing of following sizes medium class PVC conduit aong with accessories in surface/ recess

including cutting the wall and making good the same incase of recessed conduit as required

4.1 Supplying and Installation of following size perforated of painting with powder coating M.S. cable trays

of perforation of not more than 17.5% in convinient sections, joined with connectors suspended

from the cieling with MS suspenders including bolts and nuts painting suspenders etc as

4.1.6 450 mm width x 50 mm depth x 2 mm thickness Metre 4 1137.00

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and

providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7

metre long etc. with charcoal/ coke and salt as required.

Digitally signed by AMIT

F.2 5.14 Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as MTR 10 1162.00

required. 11620.00

F.3 5.15 Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as MTR 15 244.00

required. 3660.00

Supply, Installation, Testing and Commissiong of 10 KVA True Online Double Conversion UPS 3Phase Input -

3Phase Output in IGBT Based Rectifier and IGBT Based Inverter 42ah Batteries:12 V, SMF Amararaja/Exide with

minimum VAH capacity of 8064 suitable for 30 minutes backup with each ups Along with Accessories Rack,

Interlinks, SFU, Parallel Kit, DC Cable Upto 5 Meters complete in all respect as per the directions of the engineer

in charge. UPS should have availability of Input /Output isolator, Inbuilt manual bypass along with phase

sequence corrector. UPS Efficiency shall not be less than 94% from 25% to 100% Load

Total of Electrical items 654720.30 482671.00

GST Multiplying factor @ 1.0633 on Electrical DSR 2022 for GST 12% to 18%

Modfied factor of GST on DSR @ 0.973 for considering GST @ 18% instead of 21.27 %

Digitally signed by AMIT

SCHEDULE OF QUANTITIES - DATA and VOICE WORKS

S NO Description UOM Qty Rate DSR Amount NDSR Amount

A. UTP Components for Data

Supply, Fixing & Laying of CAT 6 UTP cable 23 AWG solid copper conductors for Connectivity of Hub room to End Point.High Speed Gigabit Ethernet U/UTP, 250 MHz, Class E, 23 AWG, Unshielded LSZH Cable, C6

Supply , Installtion , Testing and Comissioning of I/O port for CAT6 cable termination at Rack Side. Keystone Unshielded Outlet, 180DG C6, Blue

Supply , Installtion , Testing and Comissioning of I/O port for CAT6 cable termination at Rack Side end Redantant . Keystone Unshielded Outlet, 180DG C6, Yellow

Supply , Installtion , Testing and Comissioning of CAT6 patch cord 2 Mtr (7 feet) for information outlet (I/O) to end user Redantant device connectivity.High Speed Gigabit 24AWG U/UTP Patch Cord Yellow, LSZH, C6, 2M (Yellow)

Supply , Installtion , Testing and Comissioning of CAT6 patch cord 2 Mtr (7 feet) for information outlet (I/O) to Rack End Redantant device connectivity.High Speed Gigabit 24AWG U/UTP Patch Cord Yellow, LSZH, C6, 2M (Yellow)

Supply , Installtion , Testing and Comissioning of 24 port Loaded Angled Staggred Jack Panel for CAT6 cable termination at rack end. Data Active Redandant

12 MR SITC of 04 core OM3 Multimode fiber orange color 50/125, minimum bending radius 15x OD RM 30 229.17 6875.00

13 MR SITC of 24U Rack Each 1 34,500.00 34500

Supply instllation testing and commissioning of Access Switch of 24 x 1G POE+, 4 x SFP+ , 370W PoE, Switching Capacity of switch is of 176 Gbps having Forwarding performance (64-byte packet size): 130 Mpps, Secure Shell (SSH), as per

14 MR approved Brand Nos. 1 165500

B 200 Pair MDF Box

1 MR 200 Pair MDF Box with mounting Frame Nos. 1 11666.00 11666

2 MR 10 Pair Krone Module Nos. 1 900.00 900

3 MR 25 Pair Riser Cable Mtr. 5 750.00 3750

GRAND TOTAL (A+B) 91200.00 305011.00

GRAND TOTAL (A+B) 91200.00 305011.00

GST Multiplying factor @ 1.0633 on Electrical DSR 2022 for GST 12% to 18% 96972.96

Modfied factor of GST on DSR @ 0.973 for considering GST @ 18% instead of 21.27 % 94,354.69 3,05,011.00

Digitally signed by AMIT

1.0 E&M 2025 VRF/VRV OUTDOOR UNIT Unit Quantity Rate DSR Amount NDSR Amount

Supply, Installation, Testing & Commissioning of Modular type Variable Refrigerant Flow/Variable Refrigerant Volume air cooled Outdoor units suitable for cooling/heating having

100% hermetically sealed inverter type twin Rotary/Scroll Compressor(s),minimum two compressors (with individual separate PCB) for above 14HP modules, microprocessor

based Controller, top discharge type condensing unit(s), with R-410-A Refrigerant or equivalent, vibration Isolators with suitable foundation etc. complete as required. To have

better efficiency condenser fan shall be capable to operate at different speed with respect to load. The unit shall deliver the rated capacity and in confirmation as per IS

18728:2024 and CPWD Specifications and work even at 50°C ambient temperature without tripping. The system shall be able to deliver 100% of the rated capacity upto 39 Degree

Celcius.The unit shall be suitable to work on 400V +/- 10%, 3 Phase, 50Hz AC power supply and BMS compatible. The unit shall be filled with first charge of the refrigerant and

ready for use as required. The condenser should be coated with a hydrophilic film to prevent water accumulation on the surface of the heat exchanger, enhance water dispersion, and

reduce the risk of degradation, thereby improving overall performance and durability. The Indian Seasonal Energy Efficiency Ratio (ISEER) of the unit shall be as per Energy

Conservation and Sustainable Building Code (ECSBC) 2024 as below and complete as per CPWD specification, connections, inter connections etc. as required. (For capacity <40 kWr

ISEER 7.4, Capacity > 40 and

<70 ISEER 7.5, Capacity > 70 ISEER 7.6 for Super ECSBC Building)

2.0 INDOOR UNIT

Supply, Installation, Testing and Commissioning of following minimum capacity 4 way Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre- filter, fan

section with low noise fan / dynamically balanced blower, multispeed motor, coil section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary

supports, vibration Isolation, Corded remote control etc., suitable for operation on single phase 230 V ± 10%, 50Hz AC supply, complete, as required. The Indoor units must shut

down upon receiving a singal from the BMS System/Fire Signals. The system shall be capable to adjust air flow as per room requirement in auto mode. The cooling capacity of

indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature. (Make will be same as of Outdoor)

Supply, Installation, Testing and Commissioning of following minimum capacity High wall type Indoor unit equipped with and comfort washable synthetic media pre-filter, fan section

with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX copper coil, electronic expansion valve, outer cabinet, cord less remote control, drain pan, necessary

accessories etc., suitable for operation on 230 V ± 10%, 50 Hz, single phase AC supply, complete as required. The Indoor units must shut down upon receiving a singal from the BMS System/Fire

Singnals. The system shall be capable to adjust air flow as per room requirement automatically. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19

Degree C WB temperature. (Make will be same as of Outdoor)

REFRIGERANT PIPING

Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for

VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-O tubular

insulation/with Class-O closed cell elastometric nitrile rubber tubular sleeves sections of 19 mm thick insulation as given below for Suction and Liquid lines, all accessories as per

specifications etc. as required :

3 I7.14.1 6.4 mm dia (OD) (Softdrawn) with tube thickness 1.2 mm with 19 mm thick insulation Rmt 40.00 256.00 10,240.00

3.2 7.14.2 9.5 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm Rmt 40.00 346.00 13,840.00

3.3 7.14.3 12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm Rmt 40.00 487.00 19,480.00

3.4 7.14.4 15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm Rmt 30.00 615.00 18,450.00

3.5 7.14.5 19 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm Rmt 30.00 739.00 22,170.00

3.8 7.14.8 28.58 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm Rmt 30.00 1,157.00 34,710.00

3.10 7.14.10 34.9 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm Rmt 20.00 1,286.00 25,720.00

3.13 7.13.1 Indoor Units (y-joint) Each 7 4535 31,745.00

Digitally signed by AMIT

3.14 7.13.2 Outdoor Multi Units Each 1 8098 8,098.00

5 CONDENSATE DRAIN UPVC PIPE

Supply, installation, testing and commissioning of uPVC Pipe ,complete with fittings,

supports,U trap arrangement,Clean Plug with 6mm nitrile insulation and accessories as per specifications, drawings.

4.4 MR Providing and fixing control cum transmission wiring of 2 core x 1.0 sq. mm copper Mtr 250.0 130.00 32,500.00

in suitable conduits between indoor and outdoor unit.

6 MR Supply & Fixing IP55 Base Outdoor MCB Box with in 1 Nos 65 amp RCCB Nos 1 14650 14,650.00

7 MR Supply and Fixing MS Base Frame for VRV Outdoor Stand as per requirement of Size L.S 1 20500 20500

Digitally signed by AMIT

SCHEDULE OF QUANTITIES: FIRE PIPING, HYDRANTS, SPRINKLERS AND ACCESSORIES

S No DSR 2022/ DESCRIPTION QT UNIT RAT TOTAL TOTAL AMOUNT

S No DSR 2022/ DESCRIPTION QT UNIT RAT TOTAL TOTAL AMOUNT

MR Y E AMOUNT

DSR (INR) NON-DSR

Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts,

gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete

18.7 as required :

2 Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade

18.21 with required accessories :

18.21.1 Pendant type 16 Each 522.00 8352.00

3 Supplying, installation, testing & commissioning of sprinkler flexible pipe (UL Listed) of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of

175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side

18.25 brackets, center bracket, stockbar of following sizes complete as required.

Providing and fixing ISI Marked of approved make Fire Extinguishers complete with all accessories as per

4 manufacturer's specifications.

a) CO2 gas nozzle type - 9 Litre capacity (IS:15683). 1 NOS 12070.00 12070.00

b) Mechanical Foam gas cartridge type. 9 Kg capacity 2 NOS 2740.00 5480.00

c) ABC dry powder stored pressure type 6 kg capacity 2 NOS 4437 8874.00

GST Multiplying factor @ 1.0633 on Electrical DSR 2022 for GST 12% to 18% 74,129.02

Modfied factor of GST on DSR @ 0.973 for considering GST @ 18% instead of 21.27 % 72,127.54 26424.00

Digitally signed by AMIT

SCHEDULE OF QUANTITIES - CCTV

S NO DSR/ MR DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT

S NO DSR/ MR DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT

Supply, Installation, Testing & Commissioning of 2MP IR IP H.265 Vandal Proof

Dome camera with 2.8 to 12mm Motorised Lens,Smart IR, up to 30M IR

distance,Up to 120 dB WDR (Wide Dynamic Range),3D DNR (Digital Noise

Reduction),H.265+, H.265, H.264, MJPEG,Corridor mode, Triple streams,3-Axis,

IP67, IK10 Vandal Resistant,Colour: 0.005Lux (F1.4, AGC ON), 0 Lux with IR,Video

Compression H.265+, H.265, H.264, MJPEG,Behavior Detection Intrusion,

Supply, installation testing and commissioning of Network Video recorder Linux

based to manage and control all the cameras from control room. Software shall

support maximum 16 channel with joystick controller. 256Mbps Bit Rate Input

Max(up to 32-ch IP video), 2 SATA Interfaces, alarm I/O: 16/4, 1.5U case,19" with 1x4TB

i.e. 4TB HDD inside

Supply Installation Testing & Commissioning of 32 inch Full HD LED monitor

including wall mount brackets/ clamps/ desk mounting stand.

SITC of HDMI cables 10 meters M2M etc all compelte. 1

Total : A - CCTV 99700.00

Digitally signed by AMIT

S.NO. Qty UNIT RATE DSR AMOUNT NDSR Amount

INTELLIGENT FIRE ALARM SYSTEM

Supplying, installation, testing & commissioning of

(ii) M.R FIRE PANEL upto 2 zone complete as required. 1.00 No. 14500.00 14500

Supplying, installation, testing & commissioning of smoke detector with built in LED and Mounting

base complete withb all Connections etc. as required.

Supplying, installation, testing & commissioning of manual call boxes of MS construction in

Surface/Recess with Stainless Steel chain & hammer Assembly complete with glass and push

17.1.3 button etc. as Required. 2.00 No. 474.00 948.00

Supplying, installation, testing & commissioning of response indicator on surface/recessed MS

Box having two LED, metallic cover complete with all connections etc as required.

Supplying, installation, testing & commissioning of Fire alarm Sounder with Facility to make

annoucement, mountedc in M.S Box (16 SWG) with Hinged cover plate & Suitable for operation

with Amplifier i/c line matching transformer etc complete as required .

CABLING & WIRING

Supplying & laying of 2x1.5 sqmm fire survival alarm armoured cable, 600/1000V rated with

annealed copper conductor having XLPE insulation, steel wire armouring & ERLS outer sheath

a) 17.5.2 complete as required. 240.00 Metre 173.00 41520.00

GST Multiplying factor @ 1.0633 on Electrical DSR 2022 for GST 12% to 18%

Modfied factor of GST on DSR @ 0.973 for considering GST @ 18% instead of 21.27 %

Digitally signed by AMIT

Sno. Item Specifications Rate Qty Amount

BO Incharge Table Supplying and placing in position of main table as per photograph/drawing .The table shall be made out of 25mm thick pre -laminated particle board of approved shade. The working and non working edges shall

be finished with machine pressed with 2mm PVC egdge banding. The table top shall be supported with MS powder coated "C" shape leg of size 50mm x 50mm with connectors of size 40mm x 40mm. The front

modesty are made out of 18mm thick prelaminated particle board with 2mm thk pvc edge banding. The table shall be provisioned with Side unit of overall size: 900mm(L) x 450mm(D) x 675mm(H) . Side

storage having a provision for three equal drawer unit and two openable shutter & one open storage with shelf in it. The Side unit top shall be made out of 18mm thick pre laminated particle board and rest all

storage to be made out of 18mm thick pre laminated particle board. Provision of Junction box, wire raceway and 6 module fliptop box for wire passing or as per site requirement.Main Table Dimension

1 (L)1950mm X (D) 1000mm X (H)750mm overall Side Runer Dimension (L)900mm X (D) 400mm X (H) 675mm Nos 44,600 1.00 44,600.00

Back Storage Supplying and placing in position of Back Storage as per photograph/drawing .The back storage shall be made out of 25mm thick pre -laminated particle board of approved shade. The working and non working

2 edges shall be finished with machine pressed with 2mm PVC egdge banding. Back Storage Dimension (L)2100mm X (D) 400mm X (H)675mm Nos 26,500 1.00 26,500.00

BO High Back Chair Supplying and placing in position of 360 degrees revolving high back chair . The chair of Size

:-(W)590mm X (D)505mm X (H)1180mm - 1280mm. The chair shall be ergonomically design contour lumbar back design made of 12mm thick BWR plywood (IS Grade - 303 for seat and back) upholstered with

leatheritte and cut foam. The chrome plated loop armrest with padded upholstery is provided for extra comfort. The chair shall be provided with pneumatic height adjustment which shall have stroke of 10.0

3 +/- 0.3 cm . Five star chrome base with nylon castors . Chair seat has foam of density 30- 35 (+/ 2kg /m3) Dimensions The backrest has a foam of 28kg/m3. Nos 15,000 1.00 15,000.00

BO Visitor Back Chair Supplying and placing in position of medium back cantilever chair of size: (W)610mm X (D)505mm X (H)990mm.A contemporary design with an all black finish, . Material & subtype:Premium Leatherette,

Colour & Colour Family:Black, Dimension(W)610mm X (D)505mm X (H)990mm, Back Type:Cantilever, Base:Cantilever Frame, Base Type:Cantilever, Maximum Seating Height:19".The Seat & back are made up

4 of 12mm thk hot pressed plywood upholstered with PVC with polyurethane foam, chair seat has foam of density 32-35 kg/m3. The backrest has a foam of 28kg/m3. Nos 8,500 3.00 25,500.00

1 seater s / Reception Supplying, and placing in position of sofa with premium Leatherette upholstery adds class to the soft cushioned backrest and seating. Material & subtype:Premium Leatherette, Colour & Colour Family:as per

requirement, Seating Height:16.14"

,Legs:Stainless Steel, Finish:Matte, Size:Compact, Style:Modern, Texture:Two Tone. steam beech solid wood have used for framing construction of sofa .The seat cushion is made of multi layered foam of

density 32-35 kg/m3. The seating cushion have 2.75 &

5 1.75 inches of elastic webbing. The thread used is nylon bonded to provide lasting stitch strength . The backrest has a foam of 28kg/m3 with polyster polyfill outer layer of 200 gsm. 2 seater Nos 22,500 1.00 22,500.00

Dimension(L)790mm X (D)750mm X (H)710mm

2 seater sofa BO Cabin/ Supplying, and placing in position of sofa with premium Leatherette upholstery adds class to the soft cushioned backrest and seating. Material & subtype:Premium Leatherette, Colour & Colour Family:as per

Reception requirement, Seating Height:16.14"

,Legs:Stainless Steel, Finish:Matte, Size:Compact, Style:Modern, Texture:Two Tone. steam beech solid wood have used for framing construction of sofa .The seat cushion is made of multi layered foam of

density 32-35 kg/m3. The seating cushion have 2.75 &

6 1.75 inches of elastic webbing. The thread used is nylon bonded to provide lasting stitch strength . The backrest has a foam of 28kg/m3 with polyster polyfill outer layer of 200 gsm. 2 seater Nos 25,500 2.00 51,000.00

Dimension(L)1390mm X (D)750mm X (H)710mm

BO Cabin/ Reception Supplying, and placing in position of Cofee/ Corner Table as per approved design Dimension(L)450mm X (D)450mm X (H)450mm

7 Corner/ Cofee Table Nos 8,000 2.00 16,000.00

Centre Table Supplying, and placing in position of Centre Table as per approved design Dimension(L)1150mm X (D)900mm X (H)600 mm.

AGM/Manager Table Supplying and placing in position of main table as per photograph/drawing .The table shall be made out of 25mm thick pre -laminated particle board of approved shade. The working and non working edges shall

be finished with machine pressed with 2mm PVC egdge banding. The table top shall be supported with MS powder coated "C" shape leg of size 50mm x 50mm with connectors of size 40mm x 40mm. The front

modesty are made out of 18mm thick prelaminated particle board with 2mm thk pvc edge banding. The table shall be provisioned with Side unit of overall size: 1500mm(L) x 450mm(D) x 675mm(H) . Side

storage having a provision for three equal drawer unit and two openable shutter & one open storage with shelf in it. The Side unit top shall be made out of 18mm thick pre laminated particle board and rest all

storage to be made out of 18mm thick pre laminated particle board. Provision of Junction box, wire raceway and 6 module fliptop box for wire passing or as per site requirement. Main Table Dimension

9 (L)1500mm X (D) 900mm X (H)750mm overall Side Runer Dimension (L)900mm X (D) 400mm X (H) 675mm Nos 38,790 2.00 77,580.00

AGM Chair Supplying and placing in position of 360 degrees revolving high back chair of size: 660mm (L) x 490mm(D) x 1315mm(H). The seat cushion to be upholstered on 10-12mm thick water proof plywood and

moulded foam. The seat to be made with 12 mm thick hot pressed BWR plywood (IS grade - 303) upholsetered with Polyurethane foam and mesh fabric over it. The chair shall be provided with self tension

single locking mechanism and pneumatic height adjustment which shall have stroke of 10.0 +/- 0.3 cm .The black .The pneumatic height adjustment shall have adjustment stroke of 100 mm and shall be

operated at 30kgs extension force.The Seat & back are made up of 12mm thk hot pressed plywood upholstered with PVC with polyurethane foam, chair seat has foam of density 32-35 kg/m3. The backrest has

10 a foam of 28kg/m3. adjustable arm rest and head rest Nos 10,500 2.00 21,000.00

Medium Back chair AGM Supplying and placing in position of 360 degrees revolving medium back chair . The Craze chair of Size :-(W)590mm X (D)505mm X (H)1005mm - 1115mm. The chair shall be ergonomically design contour

Cabin lumbar back design made of 12mm thick BWR plywood (IS Grade - 303 for seat and back) upholstered with leatheritte and cut foam. The chair shall be provided with pneumatic height adjustment which shall

have stroke of 10.0 +/-

11 0.3 cm . Five star chrome base with nylon castors . Chair seat has foam of density 30-35 (+/- 2kg /m3) The backrest has a foam of 28kg/m3. Nos 8,500 4.00 34,000.00

Back Storage Supplying and placing in position of Back Storage as per photograph/drawing .The back storage shall be made out of 25mm thick pre -laminated particle board of approved shade. The working and non working

12 edges shall be finished with machine pressed with 2mm PVC egdge banding. Back Storage Dimension (L)2000mm X (D) 400mm X (H)675mm Nos 24,500 2.00 49,000.00

Digitally signed by AMIT

Conference Table Supplying and placing in position of conference table of required size as per image/ Layout drawing. The work surface top should be of thickness 42mm top prelaminated particle board with 2mm thick PVC edge

banding. The side panel are made up of 36mm thick prelaminated particle & modesty panel are made out of 25mm thick prelaminated particle board with 2mm thick PVC edge banding. The wire carrier should

13 be made from 0.6mm thick CRCA & powder coated 40-50 microns. Also having a provision of 6 module flip top box & metal raceway for wire flow. Nos 40,500 1.00 40,500.00

Confrence high back Chair Supplying and placing in position of 360 degrees revolving high back chair of size: 660mm (L) x 490mm(D) x 1315mm(H). The seat cushion to be upholstered on 10-12mm thick water proof plywood and

moulded foam. The seat to be made with 12 mm thick hot pressed BWR plywood (IS grade - 303) upholsetered with Polyurethane foam and mesh fabric over it. The chair shall be provided with self tension

single locking mechanism and pneumatic height adjustment which shall have stroke of 10.0 +/- 0.3 cm .The black .The pneumatic height adjustment shall have adjustment stroke of 100 mm and shall be

operated at 30kgs extension force.The Seat & back are made up of 12mm thk hot pressed plywood upholstered with PVC with polyurethane foam, chair seat has foam of density 32-35 kg/m3. The backrest has

14 a foam of 28kg/m3. adjustable arm rest and head rest Nos 10,500 1.00 10,500.00

Medium Back chair Supplying and placing in position of 360 degrees revolving medium back chair . The Craze chair of Size :-(W)590mm X (D)505mm X (H)1005mm - 1115mm. The chair shall be ergonomically design contour

Confrence room lumbar back design made of 12mm thick BWR plywood (IS Grade - 303 for seat and back) upholstered with leatheritte and cut foam. The chair shall be provided with pneumatic height adjustment which shall

have stroke of 10.0 +/-

15 0.3 cm . Five star chrome base with nylon castors . Chair seat has foam of density 30-35 (+/- 2kg /m3) The backrest has a foam of 28kg/m3. Nos 8,500 8.00 68,000.00

Linear Workstation Dimension: 1200mm(L) X 600mm(D) x 1050mm(H) Supplying, and placing in position of linear workstation as per Image.The worktop made out of 25mm thk. Prelam Particle board with 2 mm thk PVC edge

banding.The Table top supported on Mild Steel of size 50mm x50mm Slanted Leg and 50mm x 25mm Horizontal connectors with Powder coting of 50 Micron.Middle Leg :- 0.8 mm thk Metal panel fixed on both

side of the "T" leg for Vertical wire carrying purpose.(Sharing Workstation). 0.8 mm thk Single/Double metal powder coated raceway with Powder coting of 50 Micron below top for wiring.Vertical wire carrying

pole with powder coating 50 micron below top for wiring( Non- sharing workstation ). Also having a provision of ms perfoated sheet hanging modesty. provision of glass divider rest on the "D" brackets on the

table top between opposite seatings. All working or non working edges shall be provided with machine pressed 2mm thick PVC edging using special hot melt glue at hot temperature. Provision of pullout PVC

keyboard tray and CPU trolley for each seating.

16 Also a provision of Pedestal Unit (size:- L-400mm x D-450mm x H-600mm) with a combination of Nos 26,500 4.00 1,06,000.00

2 drawer & one filing drawer. The pedestal storage unit shall be made of 18 mm thick prelaminated Particle board with provision of handles & Locking arrangement

Modular Workstation Dimesnion: 1500mm(L) x 1500mm(L) x 600mm(D) x 1200mm(H) Modular Workstation With Side Top with 3 drawer Pedestal Size 1500W x 600D x 750/1200H.Partition NI-60mm Partition Ht. 1200mm,

Double Raceway systems Skirting label and below the table top . lower tile both side laminated and upper tile inside side fabric, White

Board and white Tinted Glass . With Side Top Size 900W x 400D x 750H 25mm thick Gabel end 18mm thick MDF board., and 3Drawer top supported Pedestal unit Size 400W x 400D x 725H made in

17 18mm thick..Complete Made in MDF Board.. Laminate 1- Frosty White, Laminate2 For drawer Facia-Honkong Blue, Fabric-F 161 Dolphin Blue, Powder Coating- Munshel Gray. and White Tinted Glass Nos 31,500 10.00 3,15,000.00

Medium Back chair Supplying and placing in position of 360 degrees revolving medium back chair . The Craze chair of Size :-(W)590mm X (D)505mm X (H)1005mm - 1115mm. The chair shall be ergonomically design contour

Workstation/ Reception/ lumbar back design made of 12mm thick BWR plywood (IS Grade - 303 for seat and back) upholstered with leatheritte and cut foam. The chair shall be provided with pneumatic height adjustment which shall

Meeting room have stroke of 10.0 +/-

18 0.3 cm . Five star chrome base with nylon castors . Chair seat has foam of density 30-35 (+/- 2kg /m3) The backrest has a foam of 28kg/m3. Nos 8,500 15.00 1,27,500.00

Pantry Table Providing & Installation of Pantry table of size 1.2m x 0.75m x 1.05m (ht) made out of 19mm thk. Commercial Board finished in Recon veneer and DU Pont Coreanof approved shade as per design. The Recon

19 surfaces to be white Duco painted. A glass top od width 0.2m on SS pegs to be provided above table. One (1) number Drawer pedestal with 3 drawers to be provided under the table. Nos 26,500 1.00 26,500.00

Reception Table Providing & Installation of Reception table of size 1.35m x 0.75m x .9 m (ht) made out of 19mm thk. Commercial Board finished in Recon veneer and DU Pont Coreanof approved shade as per design. The Recon

20 surfaces to be white Duco painted. A glass top od width 0.2m on SS pegs to be provided above table. One (1) number Drawer pedestal with 3 drawers to be provided under the table. Nos 24,500 1.00 24,500.00

21 Pantry chairs Providing & Installation of Pantry chairs of required dimension and as per instruction of EIC Nos 4,500 6.00 27,000.00

Openable Shutter storage The storage top 25 mm thick, shutter and side panels are made of 18mm thick and back panel is made of 09mm thick MDF of approved shade. All the edges of storage surface shall be provided with machine

22 pressed imported PVC lipping glued with hot melt EVA glue free from any VOC with free groove handle and suitable lock. All exposed area PVC edge lipping Nos

23.0 Pantry Under Counter Storage, made with HDHMR board finished with laminate on all exposed surfaces. Unit depth: 600mm. All edges shall be finished with matching edge banding.

Pantry Under Counter Includes shutters, shelves, hardware (hinges, handles), and necessary fittings complete in all respects.

24.0 Pantry Overhead Storage Unit, made from HDHMR board of approved shade and grade conforming to E1 norms, with unit depth of 400mm. All exposed edges finished with 2mm PVC edge

Pantry/ Workstation banding using hotmelt EVA glue. Includes shutters, shelves, and necessary hardware and fittings, complete in all respects.

Overhead Storage

Total Amount 14,43,180.00

Total Amount 14,43,180.00

Digitally signed by AMIT