REPAIR TO FLOOR WALL TILING WORKS PERIODICAL SERVICES ETC IN TECH AREA AT NAGTALAO UNDER GE BANAR

Amount

Disconnecting existing tanks cap exc 250 ltr but nexc 500 ltrs , setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc complete all as specified.

Disconnecting existing tanks cap exc 500 ltr but nexc 1000 ltrs , setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc complete all as specified.

S&F in repairs Toilet paper holder with flat recessed type stainless steel complete all as specified.

S & F in repairs CP Bib cock (long body) 15mm bore complete all as specified.

M & L in repair 15 mm stop valve (concealed) chromium plated, screwed down, high pressure with crutch or butterfly handle screwed for iron pipe or for unions and fixed complete all as specified.

M & L in repair 20 mm gate valve cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed for iron pipe or for unions complete all as specified.

M & L in repair 25 mm gate valve cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed for iron pipe or for unions complete all as specified.

S &F in repairs 15mm bore stop/angle valve of copper alloy, CP with flange complete all as specified.

S &F in repairs Pillar cock (long nose) chromium plated fancy type 15 mm bore complete all as specified.

S &F in repairs Central hole basin mixer (Basin Mixer) brass chromium plated fancy type 15 mm bore complete all as specified.

S &F in repairs PVC connection 15 mm bore of length 600 mm complete all as specified.

S &F in repairs PVC waste pipe 32-40 mm size for Wash Hand Basin / steel sinks/ urinal etc complete all as specified.

S &F in repairs PVC flushing cistern 10 Ltr Capacity including flush pipe complete all as specified.

S &F in repairs CP waste coupling 40 mm size with rubber gasket etc for SS sink complete all as specified.

S &F in repairs CP waste coupling 32 mm size with rubber gasket etc for WHB etc complete all as specified.

S&F in repair Fancy type Chromium plated shower roses 125mm size with arm, with or without swivel joints, 15mm bore, including fixing to steel pipe or union complete all as specified.

S&F in repair stainless steel towel ring complete all as specified.

S&F 5mm thick looking mirror (borderless) fancy type fixed with suitable number of stainless steel cup screws (Minimum 4 Nos) complete all as spefified.

S&F in repair stainless steel soap dish complete all as specified.

S &F in repairs PTMT body Ball cock /Float Valve 15 mm bore with epoxy coated Aluminum rod & HDPE Ball complete all as specified .

S &F in repairs PTMT body Ball cock /Float Valve 20 mm bore with epoxy coated Aluminum rod & HDPE Ball complete all as specified .

S &F in repairs HDPE flush pipe 32 mm dia of flush cistern to WC complete all as specified.

S &F in repairs GI Nipple 20 mm bore 75mm long for tank connection complete all as specified.

S&F in repairs GI Nipple 25 mm bore 75mm long for tank connection complete all as specified.

S &F in repairs health foucet with 1200mm long flexible mild steel tube, with wall hook and complete all as specified.

S &F in repairs CP body hygeine wash Jet spray assembly incl flexible PVC pipe complete all as specified.

S &F in repairs Two way angle cock 15 mm bore CP complete all as specified.

S &F in repairs Two way Bib cock 15 mm bore CP fancy type complete all as specified.

S &F in repairs Aluminium anodised Tubular towel rail, 20mm dia, D type, 60cm long between flanges all as per sample complete all as specified.

S &F in repairs Sheet glass shelf assembly consisting of 6-8 mm thick sheet glass shelf 10-15cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified.

S &F in repairs Plastic water closet seat cover, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified.

S &F in repairs CP Grating with or without hole (for waste Pipe) 100 mm dia complete all as specified.

S &F in repairs Vitreous China wash hand basin size 550x400 mm size with pedestal, with a pair of brackets, waste pipe, waste coupling complete all as specified.

S &F in repairs Vitreous China wash hand basin size 550x400 mm size with a pair of brackets, waste pipe, waste coupling complete all as specified.

S &F in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580x440 mm white, with integral foot rests complete all as specified.

S &F in repairs Stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cantilever brackets, connecting union overall size 915mm x 460mm with bowl size 410mm x 330mm x 160 mm complete all as specified.

S&F in repairs sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or includingfixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified.

Taking up or down 15mm bore steel tubing and connections, including cleaning for re?fixing ocomplete all as specified.

Taking up or down 20mm bore steel tubing and connections, including cleaning for re?fixing ocomplete all as specified.

Taking up or down 25mm bore steel tubing and connections, including cleaning for re?fixing ocomplete all as specified.

S &F 15 mm bore GI tubing medium grade including all connected fittings as elbow., socket , nipple etc complete all as specified.

S&F 20 mm bore GI tubing medium grade including all connected fittings as elbow, socket , nipple etc complete all as specified.

S & F 25 mm bore GI tubing medium grade complete all as specified.

Refixing 15 mm bore old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified.

Refixing 20 mm bore old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified.

Refixing 25 mm bore old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified.

S &F in repairs sink cock , cromium plated for 15 mm bore pipe complete all as specified.

Attending complaints of leaking/unsrevicable ,low level flushing cistern, PVC or chinaware for making it fully functtionl and leak proof by repacement the defective parts such as rubber washers , PVC levers,PVC/CP knobs if required complete all as specified.

Attemding complaints of internal water supply pipes, fittings and bottles traps for removing of blockages etc of any description incl removing & cleaning of air locks etc. by pressure pump or any other means incl taking down and refixing of pipes & fitting and replacing old unservicable pipes and fitting with new ones in any dia of pipe complete all as specified. This item includes minor repair items as change of GI socket, elbow or T etc as reqd all as specified & directed at site . Note: New GI pipes replaced if any shall be measured and paid under respective item of this schedule as S&F complete all as specified.

Attending complaints of leaking/unservicable and petty reapir to leaking bib taps , pillar taps, stop cock , angle valve ,wall mixture,WHB mixture,bib taps,two way bib taps, , etc of any description incl change of Rubber washer /Jumper sheet etc complete ( all items as washers , spindles , Rubber washer /Jumper sheet etc are included and would not be paid seprately.) complete all as specified.

S & F as in repairs Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified cap 500 ltr complete all as specified.

All as per Ser No 52.00 above but cap 1000 ltrs complete all as specified.

S&F in repairs Tank cover for 500 liter /1000 liter water storage tank complete all as specified.

S&F in repairs vitreous china wash down water closet one piece EWC , snow white/ivory , floor mounted coupled with trap, including connection to drain (or outgoing pipe), with & including WC seat cover closed pattern with flat bottom and cover, vitreous china symphonic action type dual flush system in flushing cistern of 10 litre capacity with lid, necessary fittings complete all as specified.

S&F in repairs vitreous china water closet EWC, floor mounted coupled with closet, including connection to drain (or outgoing pipe), including WC seat cover closed pattern with flat bottom and necessary fittings complete all as specified.

S&F in repair Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified.

S&F in repair Vitreous China bowl urinal flat back, full stall, with grating, spreader, waste pipe and union for discharge pipe complete all as specified

Dismantling of cast iron drain pipes, jointed in cement mortar and taking out of trenches & walls , if required 75/100 mm bore complete all as specified.

S & F PVC (SWR) pipes 110 mm single socketed in any length with rubber ring joints, laid in trenches/ floor or in fixed in wall including securing with clamp & taking down pipe including all fitting etc tee, socket, bend complete all as specified.

S & F of PVC (SWR) pipes 75 mm single socketed in any length with rubber ring joints , laid in trenches/ floor or in fixed in wall including securing with clamp & taking down pipe including all fitting etc tee, socket, bend complete all as specified.

M&L for 75 mm Cast iron soil, sand cast pipe , waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors including all fitting etc tee, socket, bend complete all as specified.

M&L for 100 mm Cast iron soil, sand cast pipe ,waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors including all fitting etc tee, socket, bend complete all as specified.

M&L for 75 mm Cast iron soil, sand cast pipe ,waste and vent pipes in any length with or without ears, with cement joints, fixed in walls including all fitting etc tee, socket, bend complete all as specified.

M&L for 100 mm Cast iron soil, sand cast pipe ,waste and vent pipes in any length with or without ears, with cement joints, fixed in walls including all fitting etc tee, socket, bend complete all as specified.

S&F in repair PVC SWR bends of 110 mm bore complete all as specified.

S&F in repair PVC SWR bends of 75 mm bore complete all as specified.

S&F in repair PVC SWR tee of 75 mm bore complete all as specified.

S&F in repair Cast iron 100 mm vent cowl complete all as specified.

M&L in repair 75 mm Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified.

M&L in repair for Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 110/ 75 mm bore pipe complete all as specified.

Demolition of floor, hearth or wall tiling including cement mortar bedding (but not backing), and rubbish off the premises complete all as specified.

M&L for coloured glazed ceramic tiles 300mm x 450mm x 6mm thick as per IS 13712 Grade II(a) over and including 15mm thick rendering in CM (1:6) set and jointed in neat cement slurry and pointed with colour cement to match on vertical surfaces as in dado (colour and pattern as approved by GE) complete all as specified.

Demolition of Cement concrete in ground floors and pavings n.exc and including 15 cm thickness below or above ground level) and removing debris out of MOD land complete all as specified.

M&L for 25 mm thick cement concrete type B-1 1:2:4 (using 20mm graded crushed stone aggregate) to receive floor finishes etc complete all as specified.

M&L for coloured non skid ceramic tiles 400mm x 400mm x 6-7 mm thick as per IS 13712 Grade II(a) in floor etc set jointed and pointed in white or coloured cement to match as in floors over and including 15mm thick screed bed in CM (1:6) complete all as specified.

M&L for Virified Ceramic double charged tiles 9-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM (1:6) complete all as specified.

All as per Ser No 77.00 above but as in skirting including 10mm thick backing coat in CM 1:4 complete all as specified.

M&L for 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified.

M&L of 20-25mm thick machine cut KOTA stone slab as in shelves (Single piece) fixed in walls machine cut, laid over cement and jointed with grey cement slurry with pigment to match the shade of the slab, incl rubbing and Mirror polishing all as specified.

M&L of machine cut kota stone slab flooring 20-25mm thick over and including 15mm thick screed bed in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified.

M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over and including 15mm thick rednering or cement screed in CM 1:4 and jointed complete all as specified.

M&L 40 mm thick PCC (1:2:4) type B1 using 20mm graded stone aggregate as in floor , hard standing flooring finished even and smooth without using extra cement complete all as specified.

M&L 50 mm thick PCC (1:3:6) type C1 using 20mm graded stone aggregate as in plinth protection finished complete including forming joints in 2 mtr interval and filled with bitumen mastic complete all as specified.

M&L 100 mm thick Cement concrete type D- 2, 1:4:8 (40mm graded aggregate) complete all as specified.

Providing and laying 80mm thick factory made chamfered edge cement concrete paver block (rubberised finish) of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand complete all as specified.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block (rubberised finish) of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified.

M&L for Chequered cement concrete tiles (rubberised finish) 30cm x 30cm x 25mm thick over and including 20mm thick screed bed in CM 1:6 complete all as specified.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified.

Taking down existing roof treatment in any postion and any thickness on RCC roof slab and debries to be disposed out of MOD land complete all as specified.

M&L for roof treatement in the following stages :-(a) Applying evenly a coat of bituminous primer conforming to IS-3384 @ 0.40 ltr per sqm over and including 10 mm thick cement mortoar (1:4) and surfaces finished even and smooth without using extra cement all as specified . (b) Second coat of blown type bitumen confirming to IS 702-1988 grade 85/25 @ 1.2 Kg/Sqm . (c) Third layer of APP modified polmeric membrane centre core of 20 micron HMHDPE outer folm 20 micron both sides thickness 1.5 mm having weight 2.25 Kg/Sqm. (d) Fourth coat of blown type bitumen confirming to IS 702-1988 grade 85/25 @ 1.2 Kg per Sqm. (e) 40mm thick PCC padding in cement concrete 1:2:4 (12.5 mm graded aggregate finishing even and smooth complete all as specified.

M&L for 10mm thick cement mortar 1:4 on roof surfaces and applying two coats of polyurethene (PU) acrylic based water proofing liquid compound over and including a coat of diluted elastomeric self primer and reinforcement fabric sheet as per manufacturer's instruction to stop leakage /seepage from roof/wall complete all as specified. Note : (i) Quated rate shall be deemed to be included for the work in building/ structure of any height. (ii) The procurement of material and execution of the work of water proofing treatment shall be got executed from one of the following manufacturers approved by GE : M/S Asian paints Ltd (Damp proof ultra) or equivalent

Supply only integral water proofing compound (ISI marked) complete all as specified.

M&L PCC 1:2:4 type B1 using 20mm graded stone aggregate in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings,levelling course, kneelers, apex stones, bed plates, kerbs not provided for, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified.

Dismantaling cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified.

M&L for 40mm thick pre-cast cement concrete louvres and jallies (measured solid) in cement concrete (1:2:4) type B-0 using 12.5mm graded stone aggregate including all moulding and set in cement mortar 1:4 complete all as specified.

M/L for precast cement conc. Post in 1:3:6 type C1 using 20mm graded stone aggregate set in CM 1:4 complete all as specified.

Demolition of stone masonry /block walling built in cement mortar complete all as specified.

M&L for squarred rubble walling Jodhpur type regular coursed well bonded, bedded and solidly hearted built in cement mortar 1:6 complete all as specified.

Extra over squared rubble stone walling Jodhpur type regular course for hammer dressing to face of stone with max depression on face from a straight edge not exc 20mm and dressing complete all as specified.

M&L for precast cement concrete solid building blocks type B1 1:2:4 (20mm graded stone aggregate) or slabs 10cm thick (with plain or interlocking joints as directed) setting in 1:6 cement mortar, complete, in walls complete all as specified.

M&L for Pre-cast cement concrete block masonry with solid blocks, type B1 1:2:4 (20mm graded stone aggregate) exc. 10 cm in width and setting in cement mortar 1:6 complete all as specified.

Decorative type curtain rod stainless steel finish MS pipe 22 to 25 mm dia as per sample superior quality complete and incl brackets and Decorative fincals (round type with mirror optic finish) trade pattern for decorative type curtain rods suitable for holding & end cover complete all as specified.

S&F as in repairs PVC moulded bath cabinet with mirror over all size 400x300 mm with shelves on the inner side & mirror on the shutter complete all as per sample complete all as specified.

Taking down carefully cement conc /spalled out concrete from RCC roof projections, ceiling ,sunsheds, beams, etc upto cover depth by chipping out lightly including necessary scafolding etc complete all as specified.

M&L for fixing MS 12 mm dia TMT bars by way of stitching ( welding ot tieing with existing reinf) incl drilling holes etc & securing ends in walls etc complete all as specified.

M&L for cleaning the existing reinf of slabs, chajjas etc & applying a coat of SIKA RUSTOFF 11 to remove the loose rust particles etc & throughly cleaning the surface complete all as specified.

M&L for applying a coat of bond coat made with cement slurry (1 part cement to 1.5 -2 parts water) mixed with admixture LATEX POWER mixed @5 Kg per 50 kg of cement & applying to the conc surfaces @ 200 gm/sqm to obtain tack complete all as specified.

M&L for 15 -20 mm thick rendering in CM 1:1:2 using1 part of cement 1 part 2-3 mm screenings of stone agg & 2 parts coarse sand ofover the bond coat applied surfaces with cement mixed with SIKA PLASTOCRETE SUPER admixture @ 100 gm /50kg of cement & finishing the surface even & rough to receive final rendering coat complete all as specified.

M&L for 5 mm thick rendering in CM 1:3 & finishing the surface even & smooth w/o using extra cement complete all as specified.

M&L for 10-15 mm thick rendering in CM 1:3 over the bond coat applied surfaces with cement mixed with SIKA PLASTOCRETE SUPER admixture @ 100 gm /50kg of cement & finishing the surface even & smooth complete all as specified.

M&L for providing steel scafolding & formwork etc for supporting RCC Slabs etc for carrying out the rehabilitation works complete all as specified. Note:- The steel scaffolding & formwork etc catered for in the items above is for supporting the RCC members during the period of their structural rehabilitation. The scaffolding & formwork shall not be removed until the RCC members have gained sufficient strength. The decision of GE shall be final conslusive & binding in respect of the extent to which the formwork is to be provided & time of its removal.

M&L for providing steel scafolding & formwork etc for supporting RCC Beams etc for carrying out the rehabilitation works complete all as specified. Note:- The steel scaffolding & formwork etc catered for in the items above is for supporting the RCC members during the period of their structural rehabilitation. The scaffolding & formwork shall not be removed until the RCC members have gained sufficient strength. The decision of GE shall be final conslusive & binding in respect of the extent to which the formwork is to be provided & time of its removal.

Makeup lost steel area due to corrosion by providing additional steel reinforcement, confirming to IS 1786:1786-2008, having a minimum yield strength of 500 N/mm2. Anchor the steel rebar in sound concrete body up to desired depth by structural GRADE pure Polyester resin based cartridge filled and applied adhesive like LockFix of FOSROC or equivalent of Dr. Fixit/BASF/ PIDILITE. Fixing of rebars is to be with pre left binding wires with existing steel at regular grid after aligning concrete profile with new mortar up to existing steel face complete all as specified.

M&L for Drilling holes for pressure grouting of 25 mm dia., 50 to 75 mm deep in RCC structural members at the intervals of 350 mm in staggered manner or as directed by Engineer-in-charge, cleaning of holes by air blower prior to fixing nozzles, fixing Teflon perforated nozzles in RCC members in cleaned holes by applying thixotropic epoxy mortar to ensure complete sealing and cutting of nozzles by chisel after completion of grouting without damaging structural elements and Application of the products shall be by manufacturer’s authorized applicator and as per manufacturer's specifications complete all as specified.

Supplying and injecting Low viscous epoxy injection resin for crack injection grouting with (Conbextra EP10 of FOSROC or equivalent) of Dr. Fixit/BASF/ PIDILITE having Flexural strength of 40N/mm² in 7 days and Compressive strength of 45N/mm² in 1 day, by pressure and using injector with accessories till nozzles refused to accept the grout, all tools and materials complete and as directed by the Engineer-in-charge. Application of the products shall be by manufacturer’s authorized applicator and as per manufacturer's specifications complete all as specified.

M&L for Providing and jacketing the distressed concrete elements in patches using Single component, shrinkage controlled, polymer modified cementitious micro concrete such as Rendrock LAxtra of Fosroc make or equivalent that achieves a compressive strength of 35 MPa in 3 days (BS 1881), Flexural Strength 09 MPa at 28 days as per BS 6319 Pt-3, Tensile Strength 3.5MPa in 28 days as per BS 6319 Pt-7,by “Form & Pour” method inclusive of Manpower, Material and Equipment. Note:- The quoted rate shall be inclusive of providing necessary formwork complete all as specified.

Taking down cement plaster from brick walls/ stone walls etc. of any description including racking out joints, hacking for key, scrubbing down with water etc complete all as specified.

M&L for 15mm thick rendering in cement mortar (1:6) on stone masonary surfaces of wall , finished even and smooth without using extra cement complete all as specified.

M&L for 10mm thick rendering in cement mortar (1:4) on Concrete surfaces of ceiling/chajja/ facia , finished even and smooth without using extra cement complete all as specified.

Preparation of plastered surfaces and applying 3mm thick wall care putty one coat of wall care putty complete all as specified.

Preparation of old decorated plastered surfaces of ceiling & applying one coat of white wash complete all as specified.

Preparation of newly plastered surfaces of ceiling & applying three coat of white wash complete all as specified.

Preparation of old decorated plastered surfaces of ceiling & applying one coat of OBD complete all as specified.

Preparation of old decorated plastered surfaces of wall & applying one coat of white wash with brush complete all as specified.

Preparation of old decorated plastered surfaces of wall & applying one coat of OBD complete all as specified.

Removing complete existing treatment and M&L for applying two coat of OBD on Old plastered surfaces over and including a coat of wall care putty on walls complete all as specified.

Preparation of newly plastered surfaced of wall and applying two coat of OBD on newly plastered surfaces of walls complete all as specified.

Preparation of old plastered surfaces of wall & applying one coat of cement base paint complete all as specified.

Preparation of old plastered/unplastered surfaces of wall & applying two coat of cement base paint complete all as specified.

Preparation of old plastered/unplastered surfaces of wall & applying two coat of exterier emulsion paint complete all as specified.

Preparation of old treated wooden surfaces of any description, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified.

Preparation of old steel surfaces of any description, over 10cm width or girth and applyingone coat of synthetic enamel paint complete all as specified.

Writing letters or figures (Black Roman, Italic or Indian n. exc 30cm high with thick paint complete all as specified.

M/S Dharam Chand Lal Chand Jain (BID ID -3072386)

S AND S Constructions (BID ID -3062850)