SPECIAL REPAIR TO BLDG NO P-112/F2, T-154/5 AND PROVN OF OVERHED SHED FOR QTR NO 134/B, INTERLOCKING TILES NEAR CSD COMPLEX, STEEL SENITARY POST 01 X TOILET BLOCK UNDER GE (WEST) BAREILLY.

Amount

Excavation in post holes in soft/loose soil n. exc 0.50 cum each, getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers n. exc 25 cm including removing of surplus spoil to a distance n exc 50 mtr and making good the disturbed surfaces all as specified.

Material and labour for cement concrete ( 1:3:6), type C-2 using 40 mm graded stone aggregate as in sub base, as in foundation filling and mass concrete, bed block, complete all as specified.

S&F for 100 mm dia steel tube medium class using as column complete all as specified and as directed.

S&F for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc according to Fe-410- W(Gde- E-250) quality- B complete all as specified.

Supply and fixing Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, L- type or J -type hooks or cranked bolts and bitumen washer or fixed with self tapping screws complete all as specified.

Supply and fixing Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, L- type or J -type hooks or cranked bolts and bitumen washer or fixed with self tapping screws including dismantling of old AC sheet complete all as specified.

S&F for 0.63mm thckness plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 etc complete all as specified and directed.

Taking down cement plaster includiing raking out joints hacking for key and scrubbing down with water complete, all as specified and directed by Engiiner-in-Charge

Material and labour for rendering/plastering 15mm thick in cement mortar (1:4) on any face of Brick walls or concrete surfaces, finished even and smooth without using extra cement complete all as specified.

M&L 12mm thick cement plaster on brick surfaces or concrete surfaces (on internal surface) in cm (1:6) including taking down plaster finishing the surface even and smooth without using extra cement and necessary scaffolding all as spd and directed

M&L for 10mm thick rendering in CM 1:3 on ceiling, finished even & smooth without using extra cement.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises.

M&L non skid ceramic coloured tiles 7 to 8 mm thick (Square/ rectangular ) area of each tile in floors etc.area of each tiles exc 0.11 sqm but n.exc.0.18 sqm set and jointed in neat cement slurry and pointed in white or colour cement to match, over and including 15 mm thick screed plaster in CM 1:6 complete all as specfied and directed.

M&L glazed ceremic colour tiles in vertical surfaces 450x350x7mm thick, set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles laid over and including 15 mm thick rendering in CM (1:4) complete all as specfied and directed.

Taking down chowkats or frames with shutters without taking off shutters from the frames, area exc 1.5 sqm and n.exc 4.0 sqm each and removal to store including cutting holes for removal of hold fast complete all as specified.

Taking down chowkats or frames with shutters without taking off shutters from the frames, area n.exc 1.50 sqm each and removal to store including cutting holes for removal of hold fast complete all as specified.

S&F pressed steel frames of 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete all as specified and directed.

S&F pressed steel frames of 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete all as specified and directed.

Supply & fixing 35mm thick flush door shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified.

S&F 35 mm thick 2nd class hard wood Hollock glazed & skelton shutters (factory made) open rebated and prepared to receive glass, gauge etc divided into squares with plain chamfered or rounded mitred and rabated sash bars any number, edges of framing plain chamfered or rounded fitted with cut mitred beads for securing glass etc; sizes of members of shutters as specified in SSR Part-I Section- 8 clause 8.20 (b) and fitted to frames/chowkats as in window/ventilator shutters. (wood shall be kiln seasoned and chemically pressure treated) complete all as specified.

S&F in repairs Factory made PVC cupboards frame of the size 75 mm x 40 mm with a wall thicknesss of 5 mm made out of extruded 5mm thick plain/prelam PVC sheet of density 600kg/cbm, having bottom width of 50mm and thickness of 10 mm. All four frame lengths reinforced with 15 mm x 15mm M.S.square tubes of 19 quage thickness throughout the frame and mitre cut at two corners adjointed with 2 nos of 15mm long brackets of 10 mm x 10 mm M.S. square tubes. the door frame shall be fixed to the wall using 8/100 long MS screw through the frame by using PVC fastners. A minimum of 4 nos of screws to be provided for each vertical members and minimum of 2 nos of screw to be provided horizontal members etc. complete as per direction of Engr-in-charge, manufacturer's specification and drawing.

S&F Factory made PVC cupboards flush type shutter of 30 mm thick consisting of frame made out M S tubes of 19 guage thickness and size 19mm x 19 mm for stiles and rails. The inside panels shall consist of 20 mm thick multichamber hollow PVC section of 1mm wall thickness, bonded using solvent cement / cynoacrylate adhesive with 5mm thick plain/prelam PVC sheet, on both sides of inside panels including 75 mm stainless steel hinges, 100 mm long handles and 18/20mm curtain rod not less than 0.9m long including bracket made of anodised aluminium necessary item to fix the shutters to frame such as and magnetic ball catch for each pair of shutters. all four edges of the panels to be sealed with lipping of 10 mm thick and 20 mm wide PVC sheet baton( made by sticking 2nos PVC foam sheet of 5mm thickness using PVC solvent cement adhesive) complete as per direction of Engr-in- charge

Supply & fixing butt hinges of Mild steel medium weight cold rolled 100 mm long

S &F 100mm long mild steel, semi-barrel tower bolt, open cover, with sheet pressed barrel, stove enamelledblack with bright bolt and fixed

S & F 125mm long mild steel pressed handles, oval type, stove enamelled black

S&F 300mm long mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed

S&F 300mm, ordinary rat tail rod pattern springs, including roller and roller plate complete, mild steel.

S/F floor door stopped of aluminum alloy body and Tongue anodised with hard drawn steel spring fixed in floor Overall length of cover plate150mm complete all as specified.

S&F Steel window with side hung shutters including projecting type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded including one shop coat painting

S&F steel windows with side hung shutters including projecting type hinges with steel handles,steel peg stays complete without glazing bars, as fly proof shutters complete all as specified and directed.

S&F mild steel framed work such as grills grating etc with ends of bars shouldered and/or riveted or forged into spikes framed guard bars, barrel iron doors ladders framed balusters walk ways railing frame work of water tanks and similar work confirming to Fe -290 Gde-E-165 all as spd and directed .

Supply & fixing as galvanized mild steel wire cloth 1.18mm average width of aperture and 0.56mm nominal dia of wire fixed with tinned tacks or galvanized wire staple fixed.

Supply & fixing 3mm thick sheet glass, ordinary quality in square not exc 0.5 sqm in each pane fixed with oil putty or wooden beads & leaving the panes clean on completion.

Demolition of cement concrete in ground floor and paving exc 15 cm above ground floors.

M&L for 25mm thick PCC 1:2:4 type B1 using 20mm agg as in leveling course all as specifed

M & L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing and incl 15mm thick screed bed or bedding layer with cement mortar 1:6 for laying floor finishes complete all as spd.

M & L Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and incl 10mm thick screed bed or bedding layer with cement mortar 1:4 for laying floor finishes complete all as spd.

S&F 18/20mm thick marble tiles machine cut makarana white as in border for kota stone laid over cement screed and jointed with gray cement slurry and pointing in white cement with admixture of pegments to match the colour includ grinding and polishing, including 15mm thick screed bed in CM 1:4 complete all as spd and directed

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and over 15mm thick screed bed in CM 1:4 complete all as spd and directed

Demolition of reinforced cement concrete, (other than ground floors), shelves, chajjas, slabs and stair case similar work carefully and matching to adjoining disturbed surfaces all as directed.

Form work to soffits of suspended slabs flat surface of concrete finished rough surfaces of concrete not exceeding 200mm thick, complete all as specified and directed.

S&F TMT bars 8 to12mm dia and over, cut to length, bent to shape required,including binding with mild steel wire (annealed) not less than 0.9mm dia.

M&L RCC 1:2:4 type B1 using 20 mm graded aggregate as in slab, shelves and stair case etc.all as specified and directed.

S&F in repairs stainless steel kitchen sink without drainage board of overall size 495x420mm and bowl size 410x330x160mm with lugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe complete all as directed.

S&F 15mm bore chromium plated fancy type bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule.

S & F in repair 15mm bore fancy type chromium plated stop valves/angle cock cast copper allay, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions

S&F steel ventilator with top hang shutters with pressed steel frames including hinges, steel peg stay in repairs

S&F grating dome 100 mm of PTMT (Min weight 25 gm)

Taking up or down steel tubing and connections including cleaning for refixing with all fittings for 15 mm bore GI tubing complete all as specified.

Taking up or down steel tubing and connections including cleaning for refixing with all fittings for 20 mm bore GI tubing complete all as specified.

S&F medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors for 15 mm bore GI tubing complete all as specified.

S&F medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors for 20 mm bore GI tubing complete all as specified.

Disconnecting existing tank setting aside or lowering if required for repairs, cleaning etc and hoisting if required reconnecting and refixing in position (cleaning repairing etc measured separately), exc 500 Ltrs and n.exc. 1000 Ltrs capacity.

S&F white colour rotational moulded polythene water storage tank (Cylindrical vertical withclosed top) hoisted and fixed in position of 1000 ltrs capacity fixed with PVC tank nipples,complete all as specified in SSR Part I.

S&F ball valve 20mm bore high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed, (minimum weight 210 gms).

S&F for gun metal globe or gate valve with iron wheel screwed both ends for iron pipe of 20 mm dia all as directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets including aluminiun framed section hanging on ceiling surface in any position complete all as specified.

S&F anodised aluminium snap grid frame work for false ceiling, size of grid 605 x 605mm complete all as specified.

S&F hangers 6mm dia. GI (upto 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60 mm long complete all as specified.

S&F for E-Particle Board 12 mm thick for insulation and acoustic purpose 60x 60 cm size , fixed with nails to frame work stapler and snip grid ong complete all as specified.

Material and labour for preparation of new plastered or pointed surface of walls/pillars/cornices by brooming down or by sand papering or by any other mean and after preparing the surfaces applying two coats of cement base paint as approved tint/colour complete all as specified.

M&L for applying 2 mm thick layer of birla wall care putty on wall/ceiling surfaces incl rubbing down the surfaces with sand paper after getting dried all as directed to obtain a smooth & even surface complete all as spd and directed.

M&L for applying two coats of oil bound distempering over one coat priming (chalk whitening) on new plastered surfaces,including preparing surface, complete all as specified and directed by Engineer-in-Charge

Material and labour for preparation of new plastered or pointed surface of ceiling by brooming down or by sand papering or by any other mean and after preparing the surfaces applying three coat of white wash as approved tint/colour complete all as specified.

M&L painting to wood and wood based surfaces of any description exc 10cm with or girth with two coats of synthetic enamel paint over a coat of pink primer including preparation of newly or previously untreated surface all as spd and directed

M&L for preparation of old painted steel surfaces of any description not otherwise described over 10 cm width & girth by applying one coat of synthetic enamel paint of approved tint complete all as specified and directed

M&L for applying Two coat of synthetic enamel paint over a coat of red oxide zink chrome primer of new steel surfaces exc 10 cm width or girth including preparation of surfaces, complete all as specified and directed.

M&L applying two coat of synthetic enamel paint over a coat of zink chrome primer of preparation of new wooden surfaces exc 10 cm width or girth, including preparation of surfaces, complete all as specified and directed.

S&F stainless steel drapery rod/ curtain rod with all fittings including brackets , wall to wall and lattu etc all as spd and directed

S& F for mild steel 1.25mm thick plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc as required complete all as specified.

S &F for framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, for bracing, including bending and welding angles, as necessary, gusset plates, riveting, etc. n exc 10 kg each brackets, conformingto Fe.290.Gde-E-165 (Brackets over 10 kg each to be measured under 'Structural Steel') complete all as specified.

S&F for 10mm thick base plates (plain or chequered) for flooring including fabrications, channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Conforming to Fe.290.Gde-E-165 complete all as specified.

S &F for stairs (framed) including stringers, treades, landing, balusters, hand rails etc. including cleats, brackets, etc. Conforming to Fe.290.Gde-E-165 complete all as specified.

Excavation in trenches n.exc 1.5m deep & n.exc 1.5m wide and n. exc 10 sqm on plan, in soft/loose soil and getting out.

M&L PCC 1:4:8 type D-2 (using 40 mm graded stone agg) as in foundation complete all as specified & directed.

S&F TMT bars 6mm to 8mm dia, cut to length, bent to shape required,including binding with mild steel wire (annealed) not less than .9mm dia.

S&F TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified.

Formwork to sides of concrete foundations, footings, bases of columns, rafts raft beams, sides and soffits ( if any ) of foundation and plinth beams; and similar work; vertical or batter, finished rough surfaces of concrete, complete all as specified and directed.

M & L formwork to sides and soffits of lintels,lintel bend, beams etc finished rough surfaces of concrete complete all as specified.

Formwork to chullah hoods, chajjas, troughs and similar items including edges complete all as specified and directed.

M&L RCC M-25 Design Mix, using 20 mm graded aggregate as in foundation, footing, plinth beam, base of columns etc all as specified and directed.

M&L RCC M-25 Design Mix, using 20 mm graded aggregate as in columns, pillars, piers, post and structs etc all as specified and directed.

M&L RCC M-25 Design Mix, using 20 mm graded aggregate as in slab, shelves etc.all as specified and directed.

M&L RCC M-25 Design Mix, using 20 mm graded aggregate as in chujjas, landings, balconies, canopies, deck slabs and in shelves and the like etc.all as specified and directed

Returning filling in including spreading, leveling, watering and well ramming in layers n.exc 25cm thick complete all as specified.

Removing excavated soil exceeding 250m but not exceeding 500m and depositing where directed at a level not exceeding 1.50m above the starting point complete.

M&L sand filling under floor or in foundations including watering and consolidation complete all as specified and directed.

Spreading,levelling,watering and well ramming the earth filling under floor not exc. 25cm thick in layers.

M & L hardcore of broken bricks of gauge n.exc.63mm, deposited,spread and levelled in layers n exc. 15 cm thick, watered and well rammed to a true surface.

M & L 75mm th PCC 1:3:6 type C-2 as in sub base, Floors, Paving, plinth protection, finished even and fair complete all as specified.

S&F Factory made PVC single door frame of size 50x47mm with a well thickness of 5mm plain colour sheet reinforced with 19mm x 19mm MS square tube having wall thickness 19 gauge complete all as shown in sketch on page 150 of SSR 2004 part-II. The door frame to be fixed to the wall using MS screw 75mm long with PVC fastener complete as per manufacturing, instruction and as specified.

S&F PTMT butt hinges, 100 mm

S&F PTMT tower bolts, 150 mm size

S&F PTMT handles, 125 mm size

S&F steel ventilators fixed type with glazing bars complete all as specified and directed.

M&L brick work with sub class' B' bricks of old size, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6.

M&L brick work with sub class'B' bricks,straight or curved on plan to any radius in half brick thick wall built in CM 1:4.

M&L 40mm thick PCC 1:2:4 (type B-0) for damp proof course to horizontal or vertical surfaces including necessary formwork

M & L rendering 15mm thick on brick wall or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified.

M & L rendering 15mm thick on brick wall or concrete surface consisting two layers, under layer of 10mm thick in CM (1:6) & top layer of 5mm thick in cement mortar 1:4 mixed with water proofing compound, finished even and smooth without using extra cement complete all as specified and directed. (Note:- Water proofing compound shall be measured and paid saperately.)

Supply only water proofing compound

M&L non skid ceramic coloured tiles 7 to 8 mm thick (Square/ rectangular ) area of each tile in floors etc.area of each tiles exc 0.18 sqm but n.exc. 0.38 sqm set and jointed in neat cement slurry and pointed in white or colour cement to match, over and including 15 mm thick screed plaster in CM 1:6 complete all as specfied and directed.

M&L for treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area

M&L for treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area

M&L for treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface

M&L for treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured)

S&F 110mm dia PVC(SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls.

S&F for PVC (SWR) bends any radius

S&F 40 mm dia Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/ sqcm fixed complete to walls ceilings or in floors etc.

S&F for vitreous china squatting pan “ORISSA” Pattern size 580x440mm white with integral foot rests complete all as directed by Engr-in-Charge

S&F for vitreous China Pedestal pan and trap, including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, complete etc complete including making good to floor complete all as directed by Engr-in-Charge

S&F in repairs Seat and cover for pedestal pan

S&F in repair PVC low level cistern 10 Ltr cap with inlet ball valve, float and handle incl bracket and flush pvc pipe of low or high density or PVC 32 mm dia for low level cistern.

S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm.

S & F for chromium plated stop valves/Angle valve cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipes 15mm bore

S&F in repair Vitreous China Wash basin, white, flat back, size 550 x400mm excluding taps, chain and plug and porcelain stopper and fixing on existing brackets.

S&F for waste coupling of PTMT (half or full threaded) (Minimum weight 32mm- 45gms/40mm-60 gms) including 323mm dia pvc corregated waste pipe

S&F soap dish,chromium plated, 100X100X60mm, fixed to wall with plugs with chromium plated screws complete all as specified and directed.

S & F Chromium plated 125 mm long shower rose with or without swivel joints, any size, incl fixing to steel pipe or union.

S&F 15mm bore chromium plated fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed

S&F brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges including brackets complete all as specified.

M&L CI floor trap 75mm with grating incluing jointing to waste pipe fixed in cement concrete type B1 (1:2:4)

M&L salt Glazed stone ware drain pipe 150 mm bore grade 'A' laid in trenches and jointed and testing complete all as specified & directed.

M&L PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested for 150 mm dia SWG pipe complete all as specified & directed.

Cutting into existing manholes for concrecting new drains making good to pipe and rendering, cutting out existing benching for and forming brach channel (1/2 Round or 3/4 Section) in cement concrete 1:2:4 type B-1 smooth finished and reformed bending as required internal dia of pipe 150mm.

Supply and providing water proofing treatment with polymeric standard water proofing membrane, Aquaflex manufactured by M/s Bengal Bitumen,MULTIPLAS STANDARD, manufactured by STP TEXAS Ltd/Hyperplas manufactured by IWL Ltd having 10 years guarantee for water tightness all as specified and directed and described as under :-

(a) Prepartion of RCC roof surface and applying one coat of polymeric modified bitumen 85/25 @ 1.2 Kg/Sqm over a coat of polymeric primer @ 0.30 Kg/Sqm including cleaning surface, all as per manufacture'"s specification complete all as specified and directed.

(b) Supply & providing water proofing treatment with polymeric proofing membrane of 3 Kg/Sqm HYPERPLAS STANDARD/MULTIPLAS STANDARD consting of 100 micron HMHDPE film centre core including coating he surface with the compatible primer and torch application of membrane with 10 cm overlaps as required thereof, complete all as specified or as directed.

Dismantling asbestos cement (corugated or semicorrugated etc ) sheets, in roof covering.

M&L for 4mm thick E-Board classic (everest or equivalent) tiles for insulation and accoustic purpose 60cm x 60cm with and including powder coated galvanised iron snap grid with 32x25x1.5mm thick Tee section and 32x25x1.5mm thick algle section with all hanging/supporting arrangements as in false ceiling and making good disturbed surface complete all as specified and directed.complete all as specified and directed.

M & L for non- skid ceremic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes even and rough with and including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed.

M & L for colour glazed ceremic coloured tiles in vertical surface 300 x 200 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick screed bed or bedding layer of cement mortar 1:4 cement and dismantling of wall tile including cement mortar bedding complete all as specified or as directed. all as spfd or as directed.

M & L applying one coat of cement based paint on old decorated or undecorated wall, roof surface including preparation of surfaces by washing rubbing down and stoping of distempered and painted surfaces complete all as specified.

M&L for preparation of newly plastered or untreated surfaces and applying three coats of white wash to walls all as specified or as directed.

M & L for plain cement concrete 1:3:6 type C-1 (using 20mm graded stone aggregate) as in plinth protection 75 mm thick finished even and fair or as specified or as directed.

M & L for Plain Cement Concrete 1:3:6 type C-1 as in bed blocks for hold fast and similar work etc complete all as specified and directed.

M & L 75mm thick plain cement concrete type D-2 1:4:8 (40 mm graded stone aggregate) as in sub base complete all as specified and directed.

M& L providing precast cement concrete rubber moulded coloured interlocking tiles 60 mm thick with grey cement and pigment of approved design and pattern laid over a layer of 25 mm thick sand cushion including filling the joint with sand complete all as specified

M&L providing cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) as in benching, coping, bed blocks including necessary form work, weathering slightly rounded or chamfered angles and throating, complete all as specified and directed by Engineer-in-charge.

Demolition of brickwork built in cement mortar or cement lime mortar including all quions, arches, pillars, etc. but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed.

M&L brick work with flyash bricks straight or curved on plan exc 6 m mean radius built in cm (1:6) all as spd and directed

M&L brick work with flyash bricks straight or curved on plan to any radius in half brick thick walls built in cm (1:4) all as spd and directed

S&F for factory made steel window double leaf, double sutters glazed and gauged on double frame with side hung shutter including box type hinges with steel handles and 100mm size 02 Nos mild steel tower bolts welded with each leaf and two peg stay to glazed window complete with fitting with and without glazing dovetailed or welded made on double frame jointed together with MS plate 3mm thick of appropriate width complete all as spd.

M&L for painting to steel surface exc 10 cm width or girth with two coats of synethic enamel paint of newly or previously untreated surface all as spd and directed

S & F solid PVC door frames of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tube all as specified or as directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width strucks inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either to side and as gap insert for top rail & bottom rail panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to stiles and rails with suitable PVC sheet beading and jointed together with solvent cement, supply and fixing in the frame at site as specified of drawing.

S & F aluminium handle, cast type anodised size of handle 125mm ISI marked .

S & F aluminium anodised, barrel tower bolts of extruded section length of bolt 150 mm ISI marked.

S & F butt hinges, medium weight, cold rolled mild steel size 100 mm ISI marked.

M&L for 2nd class hard wood, plain , solid , straight chowkhat and frame wrought, framed, rebated on the solid reounded or chamfered put together with glue pinned at joints, fixed all as specified or as directed.

M & L for 2nd class hard wood small fitting such as brackets of any type,catch and hing block shaped door and window stops and the like including all necessary labours articles not exc.200cucm each complete all as specified and as directed.

S & F butt hinges, medium weight, cold rolled mild steel size 50 mm ISI marked.

S & F mild steel barrel tower bolts, stove enamelled black , with bright bolts and fixed , length of bolt 200mm ISI Marked.

Taking down Mild steel doors of any description exc. 1.5 sqm and not exc. 4.0 sqm each including making good disturbed portions of wall with new or old bricks, lintel,cills, etc in CM 1:4 complete all as specified and directed.

S & F mild steel work confirming to Fe-290 as in gates ornamental type/grills/doors including sheet, etc all as specified and directed.

S & F small articles of steel such as hold fast, etc of Gde Fe 410-0 or Fe-0 complete all as specified and directed.

S & F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width or aperture 1.18mm and fixed with tinned tacks or galvanised wire staples all as specified or as directed.

Dismantling water tanks and removing to store capacity exc 250 and not exc. 500 litres complete all as specified and directed.

S & F 500 ltrs capacity rotational moulded polythylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I

S&F in repair PVC connection 15mm dia size with PTMT nuts of length 450mm

S & F in repair chromium plated shower rose with or without swivel joints, any size, including fixing to steel pipe or union size 125 mm complete all as specified or as directed.

S&F in repair for 15 mm dia concealed stop cock fancy type, cast copper alloy chromium plated long shank and cup washers, crutch or butter fly handle, screwed down, screwed for iron pipe of 15mm bore all as specified or as directed..

S&F in repair vitreous china,white, wash hand basin, flat back size 550x400mm 'including MS brackets including cutting for and pinning in, but excluding waste pipe.

S&F 15 mm dia brass chromium plated pillar tap, fancy type with or without lettered 'Hot' or 'Cold' ,with long screwed shanks and fly nut, capstan head, screwed for 15mm dia pipe all as directed.

S&F in repair for PVC low level flushing cistern 10 Ltrs capacity with all internal accessories and fixed to wall including provision of PVC connection pipe 15mm bore with brass union and jam nuts on both sides, PVC flush pipe 32mm dia 90cm long fixed properly to inlet of WC etc complete all as specified or as directed..

S&F in repair for vitreous china squatting pan 'Orissa' pattern of size 580mm x 440mm white with integral foot rest with 'P' or 'S' trap, front or back inlet and connection to trap with cement mortar etc complete all as specified or as directed..

Taking up or down AC/PVC rain water pipe, soil/waste/vent pipe of any size with fittings etc.

S & F sand cast iron soil, waste and vent pipe, 75mm bore, in any length with or without ear with cement joint fixed to walls complete all as specified

S & F cast iron floor trap with grating 75mm dia including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

S&F in repairs tubular, towel rail brass chromium plated 20mm dia D type 60 cm long between flanges all as spd and directed

Dismantling timber scantlings 40 sqcm & over in section , in any position unframed work.

S & F framed brackets of angles or tees with web and flanges cut to shape, drilled and counter sunk for screw including bending and welding angles as necessary gusset plates, riveting etc, n.exc 10 Kg each brackets conforming to Fe-290 Gde E-165 (Brackets over 10 Kg each to be measured under Structural steel.

M&L for MS framed work of angle, tee, F.I, conforming to Fe-290 (Gde E-165), as in roof trusses including distance pieces, cleats etc. welding or riveted complete all as specified and directed.

S & F stainless steel plate rack of size 31 " x 36 " x 10" in rrepair complete all as specified and as dirrected (Model : KPR -315 of M/S Blue Star or equivalent make- of M/S Jain Brothers sanitation Pvt Ltd Brand -Jayna)

Site Clearance in soft and loose site

surface excavation n exec 30 cm deep and averaging 15 cm deep im soft and loose site and getting out

M&L machine crushed precast concrete intelocking paver block any colour, shape and size confirming to IS:15658-2006 of 60MM thick , M35 grade with gray cement and pigment over a layer of 100 mm thick PCC (1:4:8) , type D-2 with using 40mm graded stone aggregade as in subbase of floors in is laid over and incl 25 mm thck sand cushining of existing PCC surface all as specified and directed by Engr in charge.

Taking down carefully aluminium point wiring any type including battens if any except for ceiling or where not feasible for light/ fan//bell/socket or power and including unscrewing from board, fitting and fixture such as switches,socket, ceiling rose,lamp holder,pendants, bracket and regulator etc and removing material from site including making good disturbed surface to match with the existing surface complete all as specified.

M&L point wiring with 1.5 Sqmm (FRLS) multi strand PVC insulated and unsheathed copper conductor cable concealed in PVC conduit 20 mm dia and including complete with 1.60mm thick pressed steel concealed galvanised terminal boxes and with top cover 3.0 mm thick ISI marked plastic laminated hylum sheet of reqd colour fixed with brass screws and cup washers, complete with all accessories and all as specified including 1.5 Sqmm (FRLS) PVC insulated unsheathed multistranded copper conductor to common earth and connected to earth dolly for following.

(a) One light / fan/ exhaust fan point controlled by one switch.

(b) One 5 pin 5 Amp switch socket out let point on an independent board.

(c) One 5 pin 5 Amp socket out let point controlled by one switch on same board.

All as per above item in before but for one 15 Amp 6 Pin switch socket out let independent with 2.5 Sqmm FRLS (Nominal Area) PVC unsheathed copper conductor single core multistranded complete all as specified.

S&F switch piano flush type 5 Amp single pole one way.

S&F socket out let 2 in 1 flush type 5 Amp 5 Pin complete.

S&F switch piano flush type 15 Amp single pole one way.

Taking down submain wiring including all accessories complete all as specified and directed.

M&L for sub main wiring with two single core 4.0 Sqmm (FR) copper conductor PVC unsheathed cable medium grade including PVC conduit (appropriate size) concealed in wall for sub main connection including 2.5 Sqmm (FR) PVC insulated multistranded unsheathed copper conductor used as a earth wire to common earth and connection to earth dolly all as specified. ( Note :- Two runs of 4.0 sqmm (FR) and one run of 2.5 sqmm (FR) copper conductor shall be measured as one unit length.)

Supply and Fixing ceiling rose PVC / Poly carbonate, Isolated body, three terminal AC 230 volts complete all as specified and directed.

M & L for replacement of lamp holder, PVC / Poly carbonate, insulated body with back plate batten/angle type for batten fittings complete all as specified and & directed

Supply and fix LED bulb 12 watt , 230 volt of make Bajaz/Heavells /Crompton or equvallient all as specified and directed.

S&F MCB SPN 63 Amp 240 volt complete all as specified and directed by the Engr-in-Charge. CAT No CSMBS1B40/63 N of Make C&S or equvallientin Legrand/Scheneider.

S&F MCB single pole 6 to 32 Amp 240 Volt 'B' curve 10 KA complete all as specified and directed by the Engr-in-Charge.

Supply and fix flush sheet metal enclosure SPN DB 8 way with double door IP-42 protection detachable gland plates, flush mounting for MCB fitted with bus bar , earth bar and neutral links complete including taking down old unsv all as specified and directed.

Supply and fixing surface mounting LED indoor PVC extruded T-5 batten , 20 Watt, 4 feet including connection with 23/0.0076 three core PVC flexible cable etc complete all as specified and directed.

Material & Labour for earthing complete including taking out old unsv and replace with galvanised steel earth plate 600x600x 6mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 meters below normal ground level, surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate using 4 mm dia GI wire as earth wire electrode moulded and rivetted to earth plate at one end and connected to main switch/ control switches of buildings at another end, GI earth wire encased in and including 15 mm dia GI 'light grade' pipe from upper end of earth plate upto main switch board of building including 20 dia bore GI pipe 'light grade' as water pipe from earth chamber and including excavation and earth work, PCC 1:3:6 type C1 chamber and MS angle iron frame 40x40x3mm and RCC cover 40mm thick (1:2:4) type B1 using 20mm graded stone aggregate reinforced all as specified

Supply & Fixing security light fitting, LED type, 20 Watt, 6000 K, pressure die cast housing with prismatic polycarbonate diffuser & indvl LEDs as light source with integrated electronic driver complete with M&L GI pipe mounting bracket of size 25/32 mm dia and 1.20 m long fixed to wall with and including nut, bolts and GI clamps of size 50 x 6 mm as required including two coats of synthetic enameled paint over a coat of primer and making connection with three core 23/.0076 rubber insulated copper cable from ceiling rose to connector of street light complete all as specified and directed.

Taking down, testing and repair/rewinding and replacement of items such as bearing, shaft , condenser etc of ceiling fans heavy duty 1200mm sweep, 230 volt, AC, 50 Hz single phase complete and including connecting up with flexible three core copper conductor from ceiling rose to fan connector etc all as specified and directed by Engr-in Charge.

Taking down, testing and repair/rewinding and replacement of items such as bearing, shaft , condenser etc of ceiling fans heavy duty 1200mm sweep, 230 volt, AC, 50 Hz single phase complete and including connecting up with flexible three core copper conductor from ceiling rose to fan connector etc all as specified and directed by Engr-in Charge.

S&F testing exaust fan of size 300mm , 230 volt ac type of make , Havels /cromptions /Surya complete all as specified and directed by the Engr-in-Charge.

S&F 1100 volt grade heavy duty cable PVC insulated straded aluminium cunducter surved with insuting of PVC tape and overall PVC sheeted in service continious suspened by insulating hangers not more than 1 mtr a part incl 4 mm dia suspension wire , 1 twin core cable flat of size 10 sqmm all as pecified and directed by the Engr-in-Charge.

Taking down carefully UNSV main switch DBs and MCBs of any description of an size in any position complete all as specified.

Taking down light fittings of any type including all accessories complete all as specified and directed.

(d) One buzzer/ bell point controlled by one push button on the same board with other switches or independent

S&F bell push flush type 5 Amp

S&F bell ding dong musical ,AC, 230 Volt, single pole

Supply and fix in replacement of fan regulator 150 watts electronic flush socket type with five stepped range hum free complete all as specified and directed .

Taking down and refixing carefully serviceable ceiling/ exhaust fan including provision of new single core twin twisted cable from ceiling rose to ceiling fan connector all as specified and directed by Engineer in Charge.

M&L for dismentling of the electronic /electric meter from wooden board and refixing the same with proper conceiled connectin on the same and testing after completion for reading complete all as specified and directed.

S&F indoor decorative LED light fitting CT-3 suitabele for 3to 5 watt LED lamp with brass made bracked with round base lacquered heaving brass holder and brass galary with glass incl lamp complete all as specified and directed.

S&F in replacement mirror light fitting of 1x9 watt led type of size 2feet , clear acrilic cover incl mounting on wall complete all as specified and directed.

Notes:-

REHAN CONSTRUCTION

SANJEEV ENTERPRISES