GENERAL AM 24 25 KOTHUPARA Annual Maintenance works to Kothupara LIS in Keezhuparamba Panchayath Malapuram(Dt) General Civil Work

Amount

KOTHUPARA

2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil

2.1.1:Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m and lift up to 1.5 m, disposed soil to be levelled and neatly dressed:All Kinds of soil

4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

2.32:Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared.

OD3256/2024-2025:Supplying and conveying 250 mm dia ISI marked Tata/Jindal/equivalent make seamless ready to use ERW MS pipe having sheet thickness 6.00mm (Conforming to IS:3589:2001)including painting the pipe with two coats of anti corrosive bituminous black over a coat of red oxide primer.Including conveyance charges to pump house and labour charges for loading,unloading,leading and stacking at above LI Scheme(Required quantity at site)

OD3255/2024-2025:Supplying and conveying 250 mm dia standard quality MS flange rings having sheet thickness 16mm and 75mm depth (Conforming to IS:13159-1:1993)providing required bolt holes etc including painting with two coats of anti corrosive bituminous black over a coat of red oxide primer.Including conveyance charges to pump house and labour charges for loading,unloading,leading and stacking at above LI Scheme

OD3257/2024-2025:Charges for cutting the newly supplied 250/200mm dia MS Pipe for suction delivery in required length as per the site condition by arc cutting. Then facing both the cutting edges of pipe by chipping grinding,filing and polishing and making the ends of pipe in good level for providing flange rings etc complete (OBSERVED DATA) For 4 Nos.

OD3258/2024-2025:Charges for errecting 250/200 mm dia MS pipe at suction and delivery side side by coupling the flanges using fresh rubber packing and iron nut bolt etc including all labour charges for lifting leading holding charges of pipe pieces and assembling them into water tight condition including all labour charges and rent for supporting materials etc complete including testing of joints

60.6.1:Laterite Masonry - Laterite masonry using neatly dressed stones of size 44cmx24cmx14cm in CM 1:6 including all cost of conveyance and labour charges etc. complete.

50.13.1:9 mm cement plastering of mix : 1:3 (1 cement : 3 fine sand ) including all cost of materials, labour charges etc complete

OD16580/2024-2025:Charges for detaching 250mm-350mm dia MS pipe at suction/delivery side including all labour charges for lifting, lead of up to 20 m , holding charges of pipe pieces etc without any damages including all labour charges and rent for supporting materials etc complete.

OD16731/2024-2025:Supply and of conveying ISI marked heavy type200mm to 250mm Cast Iron Non Return valve including conveyance charges to pumphouse and labour charges for loading, unloading etc.

OD16787/2024-2025:Charges for detaching the existing 200 mm to 250mm dia sluice valve/NRV by unscrewing the nut bolts / cutting and removing the rusted / edge missed nut bolts after providing necessary supporting arrangements including excavating and removing the soil if necessary, lifting and leading to a convenient place etc complete.

18.31.5.1:Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertion etc. (the tail pieces if required will be paid separately): 250 mm diameterClass I

MUJEEB RAHMAN K

Bidder Name

MUJEEB RAHMAN K

JASIL KOLAKKADAN