RENOVATION OF TOILET BLOCK AT MT GARAGE NEAR BLDG NO P-171 AND PROVN OF TRG SHED IN FRONT OF BLDG NO P-109 AT MIL STN AGARTALA

Amount

Schedule'A' Part-I: B&R works

Taking down Chowkhats or frames with shutters (without taking off shutters from the frame) not exc. 1.5 sq. m each complete all as specified and as directed.

Taking down Chowkhats or frames with shutters (without taking off shutters from the frame) exc 1.5 sq. m but n exc 4 sq. m each complete all as specified and as directed.

S & F Factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm wood grained printed PVC sheet used reinforced with MS square tube instead of plain colour PVC sheet & edges will be painted to match with printed sheet.

S&F Factory made solid PVC moulded door shutter 28 to 30mm thick with particle board coare, 28 to 30mm thick (stiles) 2,4 or 6 raised panel design with 2mm thick moulded Prelam PVC sheet on the front face and 2mm plain colour PVC sheet on back face as per specification and drawing

S&F Steel ventilator with top hung shutter including hinges,steel peg stay complete all as directed.

S and F Flush shutters, solid core construction, with block board core and plywood face panels 35mm thick , commercial type on both sides

S and F Pressed steel frames 125mmx 60mm for doors with one rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed

M & L preparation of new wooden surfaces with two coats of synthetic enamel paint over a coat of pink primer exc 10 cm width orgirth

S&F 125mm size MS butt hinges, medium weight cold rolled mild steel.

S&F 200mm long aluminium anodized barrel tower bolts of extruded section.

S&F 150mm size extruded aluminum alloy handles, fabricated type, anodized.

M&L mild steel work such as hold fasts, hooks, clamps etc and similar work conforming to Fe 290. Gde-165

S&F Mild steel sliding door bolts of size 300mm length of bolt, plate type, stove enamelled black with bright bolt not less than 12 mm dia with nad including a minimum of 6 bolts and nuts, four on bolt plate & two on staple plate.

M&L for 2nd class HW in small fittings such as wooden cleats stopper including all necessary labour article n.exc 200 cm each.

M&L for PCC 1:2:4 type B1 (20 mm graded stone aggregate) for fixing hold fasts.

M&L for prepration of old decorated surfaces of walls and applying one coat of oil bound distemper.

Demolition cement concrete(unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level)

M&L 75mm thick Cement concrete type C-2, 1:3 :6 ( 40 mm graded stone aggregate) as in plinth protection,sub base finished even and smooth without using extra cement.

Dismantling floor, hearth or wall tiling including cement mortar bedding,(but not backing) removing serviceable tiles to store and rubbish off the premises.

S&F coloured Non Skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incliding 15 mm thick screed in CM 1:4 complete all as specified and as directed.

S&F coloured Glazed ceramic tiles in vertical surface 300X 200X 7 to 8 mm thick set and jointed in neat cenment slurry, 10mm thick in CM 1:3, and ponted in white or clour cement to match complete all as specified.

S&F PVC (SWR) pipes of dia 110mm bore double socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F PVC (SWR) pipes of dia 75mm bore Single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S &F110mm of size PVC (SWR) bends any radious and provided with access door all as specified anf directed.

S &F 75mm of size PVC (SWR) bends any radious and provided with access door all as specified anf directed.

S&F PVC (SWR) floor trap of size 75mm plain with grating including jointing with solvent cement all as specified and directed.

M&L for 100mm size CI nahani trap with grating including jointing to waste pipe fixed in cement concrete type type B1(1:2:4) complete all as specified and directed

S and F Rotational moulded polye?thylene water storage tanks 1000 LTR (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I

S and F Vitreous China wash basin, white, flat back, size 550x400mm including fixing bracket , CP waste couping , and waste pipe , front pedestral complete all specified.

S&F in repair pillar taps 15mm dia bore fancy type with capstain heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe.

Soap dish, any type, fixed to plugs with chromium plated brass screws

S & F in repairs vitreous china wash down water closet pan pedestal patern white/coloured seat cover complete taking down old seat fixing bolt flush pipe complete all as specified.

S&F in repairs PVC valveless syphonic action type, flushing cistern of 10 litres capacity with all accessories incl PVC connection 15mm dia 45cm long.

S&F brass chromium plated tubular towel rail, 20 mm dia, D type, 60cm long between flangs.

S&F Vitreous China urinals of size 465X355X265mm bowl type (back or corner wall type) complete including providing and fixing plugs, bedding urinal against wall in cement mortor 1:2 securing urinal to plugs with and including 60 mm long brass screws, poniting around urinal back in cement: fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe, (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and fixed in repairs

M and L for Cement concrete type B-1, 1:2:4 25mm thick (20mm graded aggregate) in flooring

Taking up or down steel tubing 15mm and connection, including cleaning for refixing or removal to store complete all as specified.

S&F15mm bore GI tubing memdium grade fixed to wall.

Taking up or down steel tubing 20mm and connection, including cleaning for refixing or removal to store complete all as specified.

S&F20mm bore GI tubing memdium grade fixed to wall.

Taking up or down steel tubing 25 mm and connection, including cleaning for refixing or removal to store complete all as specified.

S&F25mm bore GI tubing memdium grade fixed to wall or floor

S & F Gun-metal, globe or gate valves 20 mm , with iron wheel head, screwed both ends for iron pipe and fixed

S & F Gun-metal, globe or gate valves 25mm , with iron wheel head, screwed both ends for iron pipe and fixed

M& L for Roughening surfeces of old concrete surfaces by picking sweeping, cleaning and washing down with water to remove dust etc including taking down tarfelt and brushing applying neat cement slurry @100ml /Sqm of cement mixed with liqud type water proofing compound on dry concrete surfaces including 15mm thick screed bed for in Cm 1:4 and mixed with liquid water proofing compound @ 200ml per 50 Kg of cement incl finishing the surfaces even and smooth without using extra cement (water prrofing compound shall be measured and paid separatly 200ml/50Kg of cement )

Supply of liqiud integral water proofing compound

M&L for water proofing treatment to RCC roof slab incl parapet comprising with the following course of treatment/specifications from bottom to top (a) Applying bituminous primer @100 gms per Sqm over plastered surfaces of roof incl parapet surfaces. (b) One layer of APP based polymeric membrain of apporved manufaturer , 3mm thick,weight not less than 3.6 Kgs per Sqm, reinforced with non woven polyester fabric or weight not less than 150 gram per Sqm.Polymeric membrain shall taken to a hight 60cm(minimum) and then inserted inside the groove of parapet wall and shall be done by torch on method or as per manufacture instructions (i) A minimum over lap of 100mm and 75mm should be made in the end and sides of the polymeric membrain respectively and sealed all overlap and joints as manufactures instructions.(ii) The make of polymeric membrian shall be SUPER THERMOLY OF STP Ltd or MOPLY FP OF Texsa india Ltd /IWL india Ltd (c) Applying two coat of bituminous aluminium paint on top of APP membrain.

M and L for supply and fixing 2-in-1 bib tap made of copper alloy 15mm bore suitable for fixing health facet for EWC

S & F Health faucets cat part No. F 160027 of Hindware ABS with rubbit cleaning sys , 1.25 M long PVC flexible tube and ABS wall hook

M & L brick work with sub class 'B' bricks, straight or curved on plan to any radius in half thick walls built in cement mortor 1:4 complete all as specified and as directed.

Taking down cement plaster any description complete all as specified and as directed.

M and L for Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings .complete all as specified (Paymentfor providing grooves shall be made separately)

M and L for forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty/beads in square N.exc 0.5Sqm in each pane all as specified and directed

S&F in repair 20mm bore ball brass valve high pressure with polythene float & fly nut compelete screwed for iron pipe or brass ferrule.

Surface excavation n.exc 30 cm deep and averaging 15 cm deep.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point.

M & L for broken brick aggregate hard core of gauge not exec 63 mm deposited, spread and levelled in layers n exc 15 cm thick, watered and rammed toa true surface all as specified and directed by Engr-in-charge.

M&L for 100 mm thick PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base complete all as specified and directed.

M&L for plastic dividing strips 22 mm width of strip and 1.5mm thick dividing strips inserted in position to conform to design all as specified and directed by Engr in charge.

M&L for 15 mm thick rendering in CM 1:4 on fair faces brick work or concrete surfaces mixed with water proofing compound @ 3% by wt of cement, (WPC shall be measured and paid seperately) finished even and fair.

M & L for preparation of new plastered surfaces by applying two coats of cement base paint over a coat of primer.

Excavating post holes (or similer holes) each n.exc 0.5 cum getting out,returning filling and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm watering and removing surplus soil to a distence n.exc 50m making gd surface soft/loose soil surface all as specified and directed.

M&L for sand filling under floors or in foundation including watering and consolidation spreding and levelling in layers n.exc 25 cm thick complete all as specified and directed.

Maroom/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick spread, levelled & rammed including watering

M&L for cement concrete Type C2 1:3:6 ( 40mm graded aggregate ) in foundations,filling and mass concrete all as specified and directed.

S&F for rolled mild steel in joist channel angle or Tee section fxed indipendently wthout connecting plates etc confirming to Fe-410-W(Gde-E-250) quality-B of all specified and directed.

S&F froof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam,tee, angle, channel or flat sections) including distance pieces, cleats etc confirming to Fe-410-W(Gde-E-250) quality-B of all specified and directed.

M&L for 2 coats of synthetic enamel paint over coat of red oxide zinc chrome on steel surfaces over 10cm width or girth including preparation of new surfaces.

Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws as specified.

Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws as specified.

Material and labour for brick work with locally available sub class ‘B’, old size, best quality bricks, straight or curved on plan exc 6 m mean radius built in cement mortar ( 1:6) all as specified and directed.

Schedule'A' Part-I: E & M works

Taking down carefully to existing copper/Aluminum point wiring (light,socket or power) complete including fittings such as switches, ceiling roses, pendents, sockets, boxes, light fitting etc and removing from site and making good disturbed surfaces of walls, floors etc complete all as specified.

Point wiring with PVC insulated and unsheathed multistranded FRLSH copper conductor single core 1.5 Sqmm (nominal area) cable using approved colour code as per IS drawing in and incl PVC casing and capping (ISI Mark) with all accessories including providing sunk cast pressed steel terminal boxes off size made out of 1.5mm thick MS sheet duly painted with black bitumen paint over a coat of red oxide primer and providing 3 mm thick plastic laminated bakelite sheet(HYLUM BRAND) top cover alongwith copper earth wire PVC insulated & unsheathed multistranded(FRLSH) copper conductor cable of size 1.5 Sqmm as continous earth wire connected to common earth and earth dolly complete all as specified

One light / Fan / Bell Point controlled by one way switch 5 Amp.

One 3 pin 5 Amp socket out let controlled by one switch on same board.

M & L Wiring for circuit/submain wiring alongwith earth wire with the following sizes of FR is PVC insulated copper conductor, single core cable in surface/ recessed as required ,4 sq. mm (3 run) earth wire in PVC cashing capping

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

Material & Labour Switch piano, flush type single pole, one way 5 Amp complete all as specified and directed.

Material&Labour PVC rectangular block for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 175 x 100 x 50mm .

Supply and fixing Switch socket combination 2 in 1, 5 A flush type complete all as specidied and directed.

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning. (a) SP 5 to 32 AMP

XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10sq mm.4core.

3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. Complete all as specified and directed.

Supply and fixing PP-R Gate Valve 25 mm outer dia (brass insert) fitting complete all as specified as directed by Engr-in-Charge.

Supply and fixing for making connection of 1" (32mm) dia with PP-R main by providing and fixing Elboe 900 including fusion joint complete all as specified and directed.

Taking up or down steel tubing and connections, including cleaning for re?fixing or removal to store

S & F socket outlet 2 in 1, 5 pin, 5/6 Amp, 240 volt flush type (ISI marked) complete all as specified and directed

Supply and fixing ceiling rose, surface bakelite, 65mm x 50mm , two to three terminals complete all as specified & directed.

XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 4 sq mm. 2 core.

NOTES :- 1. The amount of schedule of credit shall be deducted from the total of this BOQ for arriving at contract sum. 2. Unless otherwise specified the rates for PCC shall deemed to include the cost of formwork shuttering etc, required for complete and proper execution of the work. Refer Schedule 'A' notes for details.

M/s Amrit Gope

M/S PAUL ENTERPRISE

M/S UTTAM GANGULY ENTERPRISE