Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.1 LAccepted-AOC | L1 | Accepted-AOC RETENDER SINGLE BID |
| Sl No | Description | Qty | Unit | Anandan K L1 |
|---|---|---|---|---|
| 1.00Installation of motor and panel board at Chempakunnu DWSS under Narikkuni GP | ||||
| 1.00 | 90.14.1.2:Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623.<br>
Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 1.6mm CRCA sheet, powder coated (excluding base frame) | 3 | sqm | 2,300 ₹6,900 Lowest |
| 1.00 | 90.14.24.19:Supply & fixing the following Power Capacitors 3 phase delta connected in positon and giving connection.4 KVAr, 3 phase, 440 V, delta connected, standard duty Metalised Poly Propylene Capacitor, Box Type, suitable for direct connection to motors. | 1 | each | 1,200 ₹1,200 Lowest |
| 1.00 | 90.14.28.17:S & F Motor starters of the following ratingsFully automatic star delta pump starter for three phase 15HP Submersible motor | 1 | each | 10,000 ₹10,000 Lowest |
| 1.00 | 90.16.1.2:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required2.65 mm copper conductor (12 SWG) | 10 | metre | 44 ₹440 Lowest |
| 1.00 | 90.16.1.3:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.15 mm copper conductor ( 10 SWG) | 20 | metre | 63 ₹1,260 Lowest |
| 1.01 | 90.16.5.2:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.2.65 mm (12 SWG) | 8 | each | 25 ₹200 Lowest |
| 1.01 | 90.16.5.3:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.3.15 mm (10 SWG) | 8 | each | 27 ₹216 Lowest |
| 1.01 | 90.6.10.3:Supply and fixing of following sizes of light gauge PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required32 mm | 20 | metre | 127 ₹2,540 Lowest |
| 1.01 | 90.6.6.4:Supply and drawing FRLS PVC insulated & sheathed 650/1100 V grade 3 core copper conductor flat cable for submersible pump motor conforming to IS 694 part I 1990 as required including giving necessary connections of the following sizes.6 sq mm | 40 | metre | 120 ₹4,800 Lowest |
Tender Value
₹2.3 L
EMD Value
₹5,649
Closing Date
29 Sept 2025, 6:55 pmClosed
AE-LSGD
O/O ASSISTANT ENGINEER LID AND EW NARIKKUNI GP NARIKKUNI KOZHIKODE 673585
Chempakunnu dwss Installation of motor and panel board at Chempakunnu DWSS under Narikkuni GPGeneral Electrical Work
2025_LSGD_800405_14
4/AE/LIDEW/2025-26/NRKI
Open Tender
Electrical Works
Item Rate
180 days
narikkuni
Please refer Tender documents.
13 documents required · 13 mandatory
₹555
Yes
₹5,649
Yes
13 Nov 2025
22 Sept 2025
3 Oct 2025
22 Sept 2025
29 Sept 2025
22 Sept 2025
Amount
Installation of motor and panel board at Chempakunnu DWSS under Narikkuni GP
90.14.1.2:Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623.<br> Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 1.6mm CRCA sheet, powder coated (excluding base frame)
90.14.24.19:Supply & fixing the following Power Capacitors 3 phase delta connected in positon and giving connection.4 KVAr, 3 phase, 440 V, delta connected, standard duty Metalised Poly Propylene Capacitor, Box Type, suitable for direct connection to motors.
90.14.28.17:S & F Motor starters of the following ratingsFully automatic star delta pump starter for three phase 15HP Submersible motor
90.16.1.2:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required2.65 mm copper conductor (12 SWG)
90.16.1.3:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.15 mm copper conductor ( 10 SWG)
90.16.5.2:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.2.65 mm (12 SWG)
90.16.5.3:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.3.15 mm (10 SWG)
90.6.10.3:Supply and fixing of following sizes of light gauge PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required32 mm
90.6.6.4:Supply and drawing FRLS PVC insulated & sheathed 650/1100 V grade 3 core copper conductor flat cable for submersible pump motor conforming to IS 694 part I 1990 as required including giving necessary connections of the following sizes.6 sq mm
2.1.2:Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.63 Amp TP & N
2.15.2:Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps
5.4:Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
1.17.31:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.4 x 6 sq. mm
OD504319/2024-2025:Supply and installation of dust and vermin proof , 3 phase syntax meter board (GSMB 6535) and to fix KSEB meters , fuse units, CT etc as required including fixing it on the wall , making good the damages colour washing etc as required.
OD504320/2024-2025:Supply and laying 10 mm or nearest size stainless steel rope
OD504321/2024-2025:Supply and laying 12 mm or nearest size nylon rope
OD504322/2024-2025:Supply and providing50 mm full way wheel valve (GM) -zoloto
OD504323/2024-2025:Supply and providing 50 mm NRV (GM)zoloto
OD504324/2024-2025:Supply and providing 50 mm ASTM flange set
OD504325/2024-2025:Supply, Treading, Laying and joining of 50 mm size 80 sedulous ASTM pipe approved make with required specials as delivery pipe using required leak proofing materials etc. as required.
OD504326/2024-2025:Supply installation testing and commissioning of 10 HP vertical open well submersible motor pump at rated voltage 3 phase 415 V 50 Hz AC supply at 53-213 m head of model 10DLM11stage DECCAN make/equivalent delivery size 50 mm using leak proof materials as required with necessary supports on both sides of the motor including giving connection as per direction at site.(five star rated)
OD504327/2024-2025:Supply and fixing single phasing cum dry run preventer
OD504328/2024-2025:Supply and fixing Digital multifunction meter to read V,A,F,PF -3 phase accuracy class 1 LED
OD504329/2024-2025:Supplying and fixing 63 A HRC fuse with HRC fuse link with connections in existing meter board.
OD504330/2024-2025:Supplying and fixing 63 A,2 way neutral links mounted on DMC/SMC base with connections in existing meter board.
OD504331/2024-2025:Providing and fixing 2 x 25mm x 3mm G.I strip test joint for earthing system
OD504333/2024-2025:Supply and providing 25x3mm brass nut and bolt etc. as required
OD504334/2024-2025:Supply and providing 25x6mm brass nut and bolt etc. as required
OD504335/2024-2025:Supply and fixing 9 watt LED bulb in the existing batten holder as required
OD504337/2024-2025:Dismantling old PVC conduit with wire which are not in use and handing over the same to Departmental authorities with proper written acknowledgement
1.58:Supplying and fixing PVC batten/ angle holder including connection etc. as required.
OD504339/2024-2025:Providing, laying and fixing 50 mm dia G.I pipe (medium class)for supporting the delivery pipe at the top of the well, the pipe placing across the well and clamping each other using required accessories etc.
90.2.1.3:Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm FRLS PVC insulated stranded single core copper conductor cable 650V grade, including providing switch board main and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (RoHS compliant modular accessories).Single control light point without ceiling rose - Short point
OD504346/2024-2025:Lifting the damaged existing open well submersible motor pump from well, disconnecting the supply wire, dismantling the delivery pipe and accessories which are not in use and handing over the same to the concerned departmental authorities with proper written acknowledgement.
5.9:Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required.(Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)
OD535207/2024-2025:Supply and fixing suitable pressure gauge in the delivery side of the pump
Bidder Name
Anandan K
stage.html
html • 0.03 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1328253.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .