Extension of Main Assembly Plant to accomodating the new painting booth under RKVY Scheme at KAMCO-Palakkad Unit.

Amount

Civil work

Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.

Earth work excavation in ordinary soil and depositing on banks with initial lead up to 500 m and lift up to 1.5m including breaking clods, spreading, watering, ramming etc. Complete

Supplying and filling in plinth with red earth brought from outside under floors, including watering, ramming consolidating and dressing complete. The measurements will be taken only after watering, ramming, consolidating etc. complete.

Providing and laying P.C.C 1:4:8 (1 cement, 4 M sand ,8 graded stone aggregate) and properly consolidated with hand rammers including cost and conveyance of all materials labour , shuttering , curing, lead and lift etc. complete. (Cement brand: ultratech, malabar, dalmia, Ramco)

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate of 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand)

RCC 1:1 1/2 : 3 using 20mm broken stone for footing including cost and conveyance of all materials, labour charges, form work ,scaffoldings curing etc. complete. (excluding the cost of reinforcement).( Cement brand: ultratech, malabar, dalmia, Ramco)

Steel reinforcement for R.C.C work using TMT bars including straightening, cutting, bending , placing in position and binding all complete. The binding may be done by using GI wires.

Solid cement concrete brick (30 x 20 x 15 cm) work in C M 1:3 for wall including cost and conveyance of all materials, labour charges, curing, scaffolding, etc. complete.(Note : Cement brand:- Ramco, ultratech,malabar, dalmia).

Plastering with cement mortar 1:4(1 cement :4 M sand ), 12mm thick for side wall including cost and conveyance of all materials, labour charges, scaffolding, curing etc. complete.(Note : Cement brand:- Ramco, ultratech, malabar, dalmia)

Supplying , Fabricating and erecting structural steel truss work using 1.60 mm thick steel members such asGI pipes, square tubes (Apollo/ JSW/ Bhushan), angles, checkered sheet, base plates, anchor bolb etc., painting with epoxy paint 2coats over a base coat of epoxy primer etc. complete.

Supplying and providing roofing with Alu-Zinc/Alu-GI sheets (JSW/ Bhushan/ Apollo)of 0.50 mm thick with overlap 200 mm at the ends fixing by using self driving screw sets including plain washers & bitumen washers etc. complete. The joint between the existing assembly wall and the proposed extension should be made water proof by providing necessary plain sheet in the joint.

Supplying and installing with Aluminium turbo ventilator of 600 mm size at roof top using suitable platform/chair above roof, including charges of making round hole on sheet,for fixing the ventilators, making suitable frame work using square tubes, cost and conveyance of all materials, labour charges, necessary water proofing arrangements etc complete.

Fabricating and eracting GI sheets of 2mm thickness of approved quality bent to shape of valley gutter, to the total width of 120cm, by applying 2 coats of epoxy paint over the base coat of epoxy primer in the top and bottom side, including cost and conveyance of all materials, labour charges , welding , lifting , erecting in position to line and level, forming proper slope etc . Complete .The joints between the sheets shall be welded properly by placing suitable MS flats and shall be water proof also.

Providing down water pipe of 110 mm (2.50 KG/CM² OF SUPREME BRAND) for the outlet of valley gutter including charges of fixing, clamping etc.complete. The rate also inclusive of all necessary bend, coupling, tees etc.The down water pipes shall be properly tied/ clamped to the wall/ pillers by using suitable steel clamps.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes of diameter 25mm for warter supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer- in-Charge.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes of diameter 160mm for warter supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer- in-Charge.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes of diameter 200mm for warter supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer- in-Charge.

Supplying and fixing welded mesh panel of mesh size 50 X 50mm & wire thickness 3mm, including fabricating and erecting already fabricated weld mesh frame work including cost and conveyance of all materials, labour charges, and painting with synthetic enamel paint two coats overa base coat of zynchromite primer etc. complete

Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using M.S. angels 40x40x6 mm for diagonal braces

Construction of hardened floor using ironite powder @ 3Kg/m², (to a thickness of 25mm depending up on the site condition), with cement and 8-12mm coarse aggregate (baby metal), over the cement concrete floor. Including cost and conveyance of all materials, labour charges for spreading, finishing using power trowel, curing etc. complete.

Finishing with Epoxy paint two or more coats, ( Asian Berger, Nerolac) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.

Painting with exterior emulsion paint (new work) ( Nerolac - excel/ Asian -apex/ Berger-weather coat ) two coat of approved quality and colour after cleaning the surface of walls, including cost and conveyance of all materials, labour charges, sundries ,necessary patch work / repair (if any) required etc. complete.

Providing and fixing 2mm thick glass type transparent sheet as northern light glass on assembly roof including materials, labour charges, self driving screws, scaffolding for all heights etc. complete

KP SUNNY

SIVANANDAN.A.B