Rehabilitation /Landslide Mitigation of Kangra Airport West and NH 154 Road Slope Stabilization village kuthman Tehsil Shahpur Distt. Kangra (H.P) (Construction of Reinforced soil wall (R.S. Wall) on upstream side)

Excavation in hilly area in all heights and depths and in all kind of soil by manual/mechanical means including saturated soil comprising of ordinary soil, soft rock, hard rock, chiseling, wedging out of rock (where blasting is prohibited) and their intermediate classification of soil, setting out true to the required lines, grades, cutting and trimming of side slopes and level as shown in the drawing and as directed by engineer-in-charge at site according to the MORD technical specification section 300 and 1600 and sorting out useful materials and stacking the same in all leads and lifts in acquired width of road and transportation of useful material for filling in road ways, camber, embankments for grade improvements and disposal of all surplus material to the approved dumping sites through all modes of transportation including head load or animal transport or mechanical means along with its leveling, fine dressing and carriage of machineries, materials, tools, equipments and safety measures and incidentals necessary to complete the work by mechanical means and labour if required. All useful material such as stones shungle, aggregate and slates etcetra shall be sorted out and stacked in proper stack. Recovery of stone to the tune of 3166.36 cum (three thousand one hundred sixty six decimal three six cubic metres) quantity at the rate of 300/-(Rupees Three hundred) per cubic metre shall be effected from the contractor's running bills on pro-rata basis as per actual quantity executed. Any loss to the public, private / property during the course of execution shall be the absolute responsibility of the contractor, which shall have to be compensated by him in all cases including carriage of matereials within all leads and lifts and other incidentals The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing & filling in reinforced soil wall with available reinforcedfill material including all leads and lifts, including segregation, complete as per drawing and technical specification (Reference to MoRT&H's specification Clause 3100 and IRC:78 caluse 710.1.4) & 2200. as per the entire satisfaction and directions of Engineer-in-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is including Octroi, Royality, Malkana, toll tax,GST or any other taxes imposed by the Government.

Supply and Installation of ISO Certified Self Drilling Anchors (SDA) - 32 mm diameter, made of 40CR material with yield load more than or equal to 230 kN shall be used, it shall have a minimum drill hole diameter of 51mm. The base plate shall be of size (min.) 200 X 200 X 10mm, which should be secured with hexagonal nut, washer plate, base plate, coupler for connecting bars, drill bit etc. The exposed part of SDA, nuts and bearing plate shall be protected with suitable corrosion protection coating and complete as per detailed technical specifications and as directed by Engineer - In - Charge.as per drawing as per drawing and MORD technical specifications section 1300, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Cement pressure grouting through Hollow Soil Solid Rock Anchor of outer dia 51 mm in Rock/Overburden including all cost of material and equipments required to complete the grouting work at desired pressure and all other including all other items to complete the work as per drawing and as per the direction of Engineer- in-Charge including carriage of materials within all leads and lifts and other incidental. The rate is including octrai, royality, Malkana. toll tax, sale tax, GST or other taxes imposed by the Government.

Supply & Installation of drainage bay of 600mm thick granualr material as per MoRTH & IRC Sp 102 including all other items to complete the work as per drawing and as per the direction of Engineer- in-Charge including carriage of materials within all leads and lifts and other incidental. The rate is including octrai, royality, Malkana. toll tax, sale tax, GST or other taxes imposed by the Government.

Supply And Placing/Installation Of Gabion Facia/Unit With Integrated Tail as Secondary Reinforcement For Reinforced Soil System As Per IS 16014:2012, Morth Clause 3100, IS 160 & IRC SP116,Made Of Mechanically Woven Double Twisted Hexagonal Shaped Wire Mesh, Mesh Type 10x12, 90%Zn+10%Al+Polymer Coated, Double Twisted Steel Wire MeshDia.2.7/3.7mm(Id/Od),Mechanically Edged/ Selvedged, With Partitions At 1m Interval ,Tying With Lacing Wire Of Dia2.2/3.2mm(Id/Od),filled with boulders with least dimension of 200 mm, as per drawing, the supplier shall be an indigenous manufacturer and shall have In-House NABL-accredited testing facility for testing the Tensile strength and Punching capacity of Mesh to checked by engineer in charge as per the direction of Engineer- in-Charge including carriage of materials within all leads and lifts and other incidental. The rate is including octrai, royality, Malkana. toll tax, sale tax, GST or other taxes imposed by the Government. complete including carriage of materials within all leads and lifts as per direction of Engineer - in - charge.

Providing & installation of stones for Gabion Units with approved selected Quality including all leads and lifts within 1-2km, including segregation, complete as per drawing and detail technical specification. engineer in charge as per the direction of Engineer- in-Charge including carriage of materials within all leads and lifts and other incidental. The rate is including octrai, royality, Malkana. toll tax, sale tax, GST or other taxes imposed by the Government.

Supplying and laying of BIS, ISO & CE marked Knitted and proprietary coated Polyester Uniaxial Geogrid for Soil Reinforcement indigenously manufactured from selected high tenacity polyester yarn with high molecular weight (> 25000 g/mol), and low carboxyl end group (<30mmol/kg) (extruded PP geogrids & Polyester strips & Geostrips, Steel Strips not allowed & not accepted). Requirement of geogrid strength in both direction and granular fill. (Specification: IRC:SP:59-2002 & MORTH Section-700) with necessary overlaps as per the specifications with prior approval of concerned Superitending Engineer and as directed by Engineer-in-Charge as per the direction of Engineer- in-Charge including carriage of materials within all leads and lifts and other incidental. The rate is including octrai, royality, Malkana. toll tax, sale tax, GST or other taxes imposed by the Government. Geogrid type I

Supplying and laying of BIS, ISO & CE marked Knitted and proprietary coated Polyester Uniaxial Geogrid for Soil Reinforcement indigenously manufactured from selected high tenacity polyester yarn with high molecular weight (> 25000 g/mol), and low carboxyl end group (<30mmol/kg) (extruded PP geogrids & Polyester strips & Geostrips, Steel Strips not allowed & not accepted). Requirement of geogrid strength in both direction and granular fill. (Specification: IRC:SP:59-2002 & MORTH Section-700) with necessary overlaps as per the specifications with prior approval of concerned Superitending Engineer and as directed by Engineer-in-Charge as per the direction of Engineer- in-Charge including carriage of materials within all leads and lifts and other incidental. The rate is including octrai, royality, Malkana. toll tax, sale tax, GST or other taxes imposed by the Government. Geogrid type II

Providing and instalaltion of CRS rod of 12mm diamter for connection between the fascia element (Gabion) and Geogrid as per drawings.including carriage of materials within all leads and lifts and other incidental. The rate is including octrai, royality, Malkana. toll tax, sale tax, GST or other taxes imposed by the Government