Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹79.2 LAccepted-Finance VILLAGE THARAS P O HURLA TEHSIL BHUNTAR DISTT KULLU H P 175125 | KULLU | HIMACHAL PRADESH | 175125 | L1 | Accepted-Finance Being a L1 | |
| 2 | L2₹79.3 L+₹6,043.34 (0.08%)Rejected-Finance R O VILLAGE AND PO HURLA TEHSIL BHUNTAR DISTT KULLU H P | L2 | Rejected-Finance Being a 2nd lowest |
Tender Value
₹75.5 L
EMD Value
₹1.5 L
Closing Date
2 May 2026, 5:00 pmClosed
Er. B.C. Negi
Executive Engineer, Kullu Division, HP.PWD, Kullu
(SH- Providing and laying G-III and Bituminous concrete and 2.5mm thick (10cm wide) thermoplastic paint in Km 0/00 to 2/800
2026_PWD_135035_1
PW/KD/TA/2025-26-1637-46 Date 23.04.2026
Open Tender
Civil Works - Roads
Percentage
60 days
Kullu
As refer to bid document
9 documents required · 9 mandatory
₹2,000
₹1.5 L
15 May 2026
27 Apr 2026
4 May 2026
27 Apr 2026
2 May 2026
27 Apr 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Providing, laying, spreading and compacting stone aggregate of specific size to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel/vibratory roller roller 8-10 tonnes in stages to proper grade and camber, applying and brooming, stone screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading-III as per Technical clause 405 by mechanical means complete including hauling/ carrige of materials, labour and equipment to various location through all modes of transporation with in all leads and lift of materials and as per direction of Engineer-in-charge.The rate is including octroi, Royality , Malkana, toll tax, or any other taxes imposed by the Goverment but excluding GST. | 71.25 | Per Cubic metre | 2,904.1 | ₹2,06,917.13 |
| 2 | Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.00 kg/sqm (Zero point seventy - One point zero Kilogram per square metre) using mechanical means as per techanicaly specification clause 502 low porosity complete including hauling/ carrige of materials, labour and equipment to various location through all modes of transporation with in all leads and lift of materials and as per direction of Engineer-in-charge.The rate is including octroi, Royality , Malkana, toll tax, or any other taxes imposed by the Goverment but excluding GST. | 950 | Per Square metre | 62.3 | ₹59,185 |
| 3 | Providing and applying tack coat with bitumen (RS-1) using pressure distributor at the rate of 0.25 to 0.30 kg/sqm (Zero point twenty five to Zero point thirty kilogram per square metre) on the prepared non bitumen granular surface cleaned with Hydraulic broom as per Technical specification clause 503 complete including hauling/ carrige of materials, labour and equipment to various location through all modes of transporation with in all leads and lift of materials and as per direction of Engineer-in-charge.The rate is including octroi, Royality , Malkana, toll tax, or any other taxes imposed by the Goverment but excluding GST. | 19,000 | Per Square metre | 21.25 | ₹4,03,750 |
| 4 | Providing and laying bituminous concrete with 100-120 TPH batch type hot mix plant producing an average output of 40-60 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 to 5.6 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 509 complete including hauling/ carrige of materials, labour and equipment to various location through all modes of transporation with in all leads and lift of materials and as per direction of Engineer-in-charge.The rate is including octroi, Royality , Malkana, toll tax, or any other taxes imposed by the Goverment but excluding GST. | 570 | Per Cubic metre | 11,439.55 | ₹65,20,543.5 |
| 5 | Providing and laying of hot applied thermoplastic compound 2.5mm (Two point five millimetre ) thick including reflectorising glass beads @ 250 gms (Two hundred fifty grams) per square metre area thickness of 2.5 mm (Two point five millimetre) is exclusive of surface applied glass beads as per IRC:35. The finished surface to be leveled uniform and free from streaks and holes within all leads and lifts including carriage of materials and as per direction of Engineer-in- charge. | 600 | Per Square metre | 606.3 | ₹3,63,780 |
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 1.26 MB
sbd.pdf
Tender Documents • 2.40 MB
BOQ_199880.xls
BOQ • 0.28 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .