SHAMRI GROUP- PROVIDING RAW WATER TO EXISTING 3 WW ie SHAMRI, CHIRANA AND MUNDLANA FROM JLN CANAL, UPDATING OF EXISTING STRUCTURES OF WW CONST OF CB WW AT KAILANA KHAS FOR GROUP OF 3 VILLAGES, PROV FHTC AND LAYING OF BALANCE PIPE LINES IN VILLAGES

Amount

WATER TREATMENT PLANT (WTP) Design, construction, testing & commissioning of below mentioned capacity Water treatment plant at variuus Water Works including inlet channel, Alum dozing, Flash mixing, Clarifloculator, filter box, over head Reservoir for back wash, waste water tank including all civil work, pumping machineries and electric cabling, control panels, entire piping network of suitable size DI pipe from raw water pump to inlet box of WTP, WTP to CWT & Suction Well for CW including DI specials, suitable size Sluice valves, Hodies, manhole covers, air scour equipment, chemical house including chlorination equipment and arrangement of flow measurement and sand bed complete in all respects as per NIT (Sluice valves of make IVC/VAG) . - (i) Shamri water works

(ii)- Mundlana water works

(iii)- Kailan Khas water works

RAW WATER PUMPING MACHINERY Supply & Eraction of Horizontal spindle split casing type pumping sets of following duties directly coupled to AC squirrel cage induction type motor with accessories as described in Schedule No II complete in all respect with priming arrangement with complete base frame- RAW WATER PUMPING STATION- 11900 LPM X 60 M. Head

WATER WORKS KAILANA KHAS- 500 LPM X 12.50 M. Head

CLEAR WATER PUMPING MACHINERY- Supply & Eraction of Horizontal spindle split casing type pumping sets of following duties directly coupled to AC squirrel cage induction type motor with accessories as described in Schedule No II complete in all respect with priming arrangement with complete base frame- WATER WORKS SHAMRI- 500 LPM X 25 M. Head

WATER WORKS MUNDLANA- 600 LPM X 25 M. Head

WATER WORKS KAILANA KHAS- 500 LPM X 20 M. Head

500 LPM X 45 M. Head

PANEL BOARDS FOR MOTORS Supply, erection, testing & commissioning of wall mounted electrical L.T. Panel board, fabricated from 16 SWG CRCA sheet duly stouted with suitable angle iron frame work and completely powder coated of approximate size 1200 x 900 mm and 400 mm deep having follwing items - For 2 no Pumping Sets of 11900 LPM x 60 m Head a) Main switch 500 amp. 1 No. (L&T Siemens, ABB) b) CT 100/3 = 2 Nos. (AE/ KAPPA/ L&T) c) Digital Multi function meter = 1 No. d) SPP = 1 No. of approved make e) Motor starter, Star delta for 11900 LPM x 60 m Head = 2 Nos (L&T Siemens, ABB) f) VSS 1 No. & ASS 2 Nos. of approved make. g)Capacitor KVAR as per site requirement = 1 No. h) Indicating Lamp = One Set i) Change over switch of suitable Amp = 1 No. (Each) Ref. sr. no. 2.1.1

For 2 no Pumping Sets of 500 LPM x12.50 m Head a) Main switch 63 amp. 2 No. (L&T Siemens, ABB) b) CT 100/3 = 2 Nos. (AE/ KAPPA/ L&T) c) Digital Multi function meter = 1 No. d) SPP = 1 No. of approved make e) Motor starter, Star delta for 500 LPM x 12.5 m Head = 2 Nos (L&T Siemens, ABB) f) VSS 1 No. & ASS 2 Nos. of approved make. g)Capacitor KVAR as per site requirement = 1 No. h) Indicating Lamp = One Set i) Change over switch of suitable Amp = 1 No. (Each) Ref. sr. no. 2.2.1

For 2 no Pumping Sets of 500 LPM x 25 m Head a) Main switch 63 amp. 2 No. (L&T Siemens, ABB) b) CT 100/3 = 2 Nos. (AE/ KAPPA/ L&T) c) Digital Multi function meter = 1 No. d) SPP = 1 No. of approved make e) Motor starter, Star delta for 500 LPM x 25 m Head = 2 Nos (L&T Siemens, ABB) f) VSS 1 No. & ASS 2 Nos. of approved make. g) Capacitor KVAR as per site requirement = 1 No. h) Indicating Lamp = One Se ti) Change over switch of suitable Amp = 1 No. (Each) Ref. sr. no. 3.1.1

For 2 no Pumping Sets of 600 LPM x 25 m Head a) Main switch 63 amp. 2 No. (L&T Siemens, ABB) b) CT 100/3 = 2 Nos. (AE/ KAPPA/ L&T) c) Digital Multi function meter = 1 No. d) SPP = 1 No. of approved make e) Motor starter, Star delta for 600 LPM x 25 m Head = 2 Nos (L&T Siemens, ABB) f) VSS 1 No. & ASS 2 Nos. of approved make. g)Capacitor KVAR as per site requirement = 1 No. h) Indicating Lamp = One Set i) Change over switch of suitable Amp = 1 No. (Each) Ref. sr. no. 3.2.1

For 2 no Pumping Sets of 500 LPM x 20 m Head a) Main switch 63 amp. 1 No. (L&T Siemens, ABB) b) CT 100/3 = 2 Nos. (AE/ KAPPA/ L&T) c) Digital Multi function meter = 1 No. d) SPP = 1 No. of approved make e) Motor starter, Star delta for 500 LPM x 20 m Head = 2 Nos (L&T Siemens, ABB) f) VSS 1 No. & ASS 2 Nos. of approved make. g)Capacitor KVAR as per site requirement = 1 No. h) Indicating Lamp = One Set i) Change over switch of suitable Amp = 1 No. (Each) Ref. sr. no. 3.2.2

For 2 no Pumping Sets of 500 LPM x 45 m Head a) Main switch 63 amp. 2 No. (L&T Siemens, ABB) b) CT 100/3 = 2 Nos. (AE/ KAPPA/ L&T) c) Digital Multi function meter = 1 No. d) SPP = 1 No. of approved make e) Motor starter, Star delta for 500LPM x 45 m Head = 2 Nos (L&T Siemens, ABB) f) VSS 1 No. & ASS 2 Nos. of approved make. g)Capacitor KVAR as per site requirement = 1 No. h) Indicating Lamp = One Set i) Change over switch of suitable Amp = 1 No. (Each) Ref. sr. no. 3.2.3

Supply, erection, testing & commissioning of IS marked copper wire for various motors with underground system in PVC and flexible pipes copper wire 3 core complete in all respevts with accessories like thimble etc.- 10 mm2 3core

25mm2 3core

185mm2 3core

Sluice Valves / NRV & specials for Pumping Machinery- Supplying, fixing, jointing, testing & commissioning of DI sluice valves resilient sheet P.N. 1.6 including cost of jointing material complete in all respect. (IVC / VAG make, Kirloskar) - 100 mm i/d

Supplying,fixing, testing & commissioning of DI swing check type reflux valve (non returned valve) PN 1.6 including cost of jointing material complete in all respect.( IVC / VAG , Kirloskar make) - 100 mm i/d

Supply, fixing & testing of Mechanical Joints PN 1.6 alongwith ruber gaskit & galvanized nuts / bolts complete in all respect.- 100 mm i/d

Supply, erection, fixing & testing of DI Double flanged pipe complete with all jointing materials - 100 mm i/d

Sluice Valves/ Specials For Rising Mains - Supplying, fixing, jointing, testing & commissioning of DI sluice valves resilient sheet P.N. 1.6 as per DNIT specification on the pumping machinery & head works including cost of jointing material (IVC / VAG make) -100 mm i/d

Supply & Fixing of Mechanical Joints PN 1.6 alongwith ruber gaskit & galvanized nuts / bolts complete in all respect.- 100 mm i/d

Providing & fixing of D.I. Kinetic Air Valve soft seated as confirming to I.S.I. complete in all respect.- 80mm

Supply erection testing and commissioning of exhaust fans each having a capacity of 45 cubic meters per minutes, complete in all respect. (For Kailan w/w)

Supply erection & testing of Ceiling fan of size 48" i/d (1200 mm) of reputed ISI make complete in all respect. (For Kailan w/w)

Providing and fixing of insulated Rubber matting suitable for HKV installation 1 meter x 2 meter x 12 mm as per specification.

Supplying and fixing of Gantry with chain pulley block of following capacity with traveling trolley of appropriate lifting capacity for handling of pumping sets capable of moving along the girders to be provided in the pump house complete in all respects as per specifications approved by Engineer-in-Charge. - 2Ton Capacity at Raw water pumping station

Providing & fixing suitable size floating along with swivel bend as per required specifications approved by Engineer-in-Charge

Supply, erection testing & commissioning of caste iron sluice Gate valve of 800 x 800 mm of 20 mm thickness with all acessories along with rising spindle including cost of all jointing material complete in all respect. (IVC / VAG make) for sump well of Raw water pumping station

Supply erection testing of reputed make LED light 100 wats with fittings and accessories complete in all repects. ( at ww Kailana Khas)

Supply erection testing and commissioning of Flow Meter (KRONE Make) with digital display of 150 mm i/d complete in all respect.

Design, Supply & Erection of copper wound outdoor type Transformers of required KVA as mentioned below on load tap changer or suitable capacity on higher side of standard make outdoor type, VCB Panel, G.O. Switch, H.T. Metering Panels, APFC Panels along with for each Transformer, 11KV Substation, entire cable network from G.O. Switch to H.T. Metering equipment and from H.T. Metering to Transformer Main to L.T. Panel, Earthing, safety equipment and any other contingent thereto complete in all respect as per DNIT and getting it passed from Chief Electrical Officer including operation & Maintenance of 5 Years.- At Raw water pumping station = 200 KVA

At Kailana Khas W/W = 63 KVA

Design, Supply & Erection of 4 No. DG Sets of required KVA as mentioned below suitable capacity on higher side capacity with Acoustic Canopy, AMF Panel and Copper Earthing of suitable rate with change over switch & synchronizing panel complete as per DNIT including operation & Maintenance of 5 Years. - At Raw water pumping station = 320 KVA

At Shamri W/W = 100 KVA

At Mundlana W/W = 125 KVA

At Kailana Khas W/W = 75 KVA

Providing & fixing in position GI elbow ISI marked complete in all respect 15 mm i/d 1,676 x 4 = 6,704

Providing & fixing in position GI Nipple ISI marked complete in all respect 15mm x150mm /100 mm 1,676 x 2 = 3,352

Operation & maintenance for the complete scope of work mentioned in the DNIT (Disinfection material will be supplied by the PHED) as per schedule-IV during Defect liability period of 12 months after trial run period of 3 months & 5 years thereafter. (Will be charged to A/mtc estimate)."- (i)- Defect liability period

(ii) Operation & maintenance during 1st year

(iii) Operation and maintenance during 2nd year

(iii) Operation and maintenance during 3rd year

(iv) Operation and maintenance during 4th year

(v) Operation and maintenance during 5th year

Bidder Name

Amount

RAVI PARKASH CONTRACTOR(GSTN-06AJMPP2964K1ZN)

suresh kumar(GSTN-06AIPPK4333B1ZJ)

NAFE SINGH CONTRACTOR(GSTN-NA)

RAVI PARKASH CONTRACTOR

suresh kumar

RAVI PARKASH CONTRACTOR

suresh kumar