Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹79,731Accepted-Finance | 1 | Accepted-Finance L1 | |
| 2 | 2₹81,800+₹2,069 (2.59%)Accepted-Finance | 2 | Accepted-Finance L2 | |
| 3 | 3₹90,340+₹10,609 (13.3%)Accepted-Finance | 3 | Accepted-Finance L3 | |
| 4 | 4₹95,800+₹16,069 (20.2%)Accepted-Finance | 4 | Accepted-Finance L4 |
Tender Value
₹1.1 L
EMD Value
₹2,151
Closing Date
23 Aug 2022, 6:55 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
EXECUTIVE ENGINEER MECHANICAL DIVISION BARAMULLA
THE EXECUTIVE ENGINEER MECHANICAL DIVISION BARAMULLA
Reinforcement of blade holding Channels, Conversion of electrically motorised control of variable Blade movement by complete hydraulically control and other repairs of Snow Cat Ozmat (Model 2018).
2022_PWDJK_184049_1
MDB/TS/e-TENDER/2022-23/70
Open Tender
Machineries/ Mechanical Engg Items
Item Rate
7 days
Baramulla
Please refer Tender documents.
7 documents required · 7 mandatory
₹200
EXECUTIVE ENGINEER MECHANICAL DIVISION BARAMULLA
₹2,151
27 Aug 2022
13 Aug 2022
24 Aug 2022
13 Aug 2022
23 Aug 2022
13 Aug 2022
Amount
Dismantling of complete blade assembly from base plate along with other damaged reinforcement of ISMC 200 and counter weight.
Fabrication, Providing and Fitting complete chassis frame work for holding the blade assembly from MS ISMC& plate with following dimentions and quantities: 1. ISMC 200/75/6= 3.048m x 22.3kg/m=68kg 2. ISMC 100/50/5=2.64m x 9.59kg/m=25.31 kg 3. 12mm MS plate=12 x 200mm x 200mm= 0.48 Sq m= 45 kg. 4. ISA 65/65/6= 2.7m x 5.93 kg/m = 16.01 kg The job includes drilling the holes on plates and welding them on sections and P/F 20mm Nut and bolts as required for joining the sections. The job is to be carried as per instructions of the Engineer-In-Charge. The material is to be coated with red oxide coating. The job also includes fixing the counter weight on back side with nut and bolt as required and repairing and fitting back the damaged front mounting plate.
Providing and fitting of hydraulic pipe of 16 feet long with pressure range 4500PSI from distributor to blade holding plate for feeding the hydraulic cylinder lines.
Providing and fitting MS Threaded Unions for connecting the Valve distributor to pipes and new pipes to Hydraulic Cylinder Pipes.
Providing and fitting Back door with Glass as per sample.
Providing and fitting new heater assembly with complete accessories. Part No. 10085912AA
Providing and fitting Three Hand Lever Control valve distributor to feed double acting hydraulic cylinders which goes automatically back to the rest position after activation with pressure capacity of 4500 PSI and flow rate of 13GPM and allowable back pressure of less than or equal to 145 PSI. The job also includes drilling of four number threaded holes on the chassis and providing and fitting 7-inch-long 20mm thick bolts for holding the same assembly of Valve Distributor with chassis.
M/S MEHRAJ AUTOMOBILES
NORTHERN INFO-SYSTEM
IMPERIAL MOTORS
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .