Loading
Loading…
Loading…
Tender Value
₹54.3 L
EMD Value
₹1.1 L
Closing Date
30 Mar 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
MAINTAINCE
15 conditions · 4 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V = Advertised value of the tender in crores of Rupees N = Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
The firm/contractor should submit a valid "B" grade or above electrical Contractor license issued by the Government Electrical Licensing Board in favor of the Firm/contractor (OR) the site Supervisor should possess the necessary valid "B" grade or above electrical Contractor license issued by Government Electrical Licensing. A copy of the valid license shall be submitted with the offer. The offer without a copy of a valid "B" grade or above Electrical Contractors license shall be summarily rejected.
Similar Nature of Work: "Works of wiring / cabling or installation and Commissioning of electrical Items (Other than on coaches) such as lights, fans, pumps, charging arrangements, earthing etc (with or without supply of items / equipment's) For 230V, 1 Phase or 415V, 3 Phase System or higher voltages."
47 conditions · 7 needing a document upload
The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Joint Venture (JV) / Registered Society /Registered Trust / Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc. and corresponding documents shall be submitted by the tenderer as per the composition of the Firm.
The Bid Security shall be deposited either in cash through e- payment gateway or submitted as Bank Guarantee bond from a scheduled commercial bank of India or as mentioned in tender documents. The Bank Guarantee bond shall be as per Annexure- VIA of GCC and shall be valid for a period of 90 days beyond the bid validity period. Non submission of scanned copy of Bank Guarantee with the bid on e-tendering portal (IREPS) and/or non submission of original Bank Guarantee within the specified period shall lead to summary rejection of bid. The original Bank Guarantee should be delivered in person to the official nominated as indicated in the tender document within 5 working days of deadline of submission of bids.
Eligibility criteria :- Eligibility criteria shall be mandatorily incumbent upon the tenderer to identify, state and submit the supporting documents duly self attested/digitally signed by which they/he is qualifying the Qualifying Criteria mentioned in the Tender Document.
Tender Form (First sheet, Second sheet) of The GCC April 2022.
Certificate format (Affadivit) which available as Annexure - V in Mandatory documents. A facility has already created for online submission of Annexure V of GCC in IREPS module, uploading of physically signed Annexure V by tenderer has been discontinued.
The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Joint Venture (JV) / Registered Society /Registered Trust / Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc.
The corresponding documents shall be submitted by the tenderer as per the composition of the Firm: Sole Proprietorship Firm: (i) All documents in terms of Para 10 of the Tender Form (Second Sheet) above. HUF: (i) A copy of a notarized affidavit on Stamp Paper declaring that he who is submitting the tender on behalf of HUF is in the position of 'Karta' of Hindu Undivided Family (HUF) and he has the authority, power and consent given by other members to act on behalf of HUF. (ii) All other documents in terms of Para 10 of the Tender Form (Second Sheet) above. Partnership Firm: (i) All documents as mentioned in para18 of the Tender Form (Second Sheet). Company registered under Companies Act2013: (i) The copies of MOA (Memorandum of Association) / AOA (Articles of Association) of the company (ii) A copy of Certificate of Incorporation (iii) A copy of Authorization/Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company. (iv) All other documents in terms Para 10 of the Tender Form (Second Sheet) above. LLP (Limited Liability Partnership): (i) A copy of LLP Agreement (ii) A copy of Certificate of Incorporation (iii) A copy of Power of Attorney/Authorization issued by the LLP in favour of the individual to sign the tender on behalf of the LLP and create liability against the LLP. (iv) An undertaking by all partners of the LLP that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP or JV in which they were / are partners/members. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the Standard General Conditions of Contract. (v) All other documents in terms of Para 10 of the Tender Form (Second Sheet). Registered Society & Registered Trust: (i) A copy of Certificate of Registration (ii) A copy of Memorandum of Association of Society/Trust Deed (iii) A copy of Power of Attorney in favour of the individual to sign the tender documents andcreate liability against the Society/Trust. (iv) A copy of Rules & Regulations of the Society (v) All other documents in terms of Para 10 of the Tender Form (Second Sheet) above.
The tenderer shall be required to submit the Bid Security with the tender for the due performance with the stipulation to keep the offer open till such date as per Clause No.5 of PART -1 of The GCC, April 2022.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Guntakal Division: 1. Provision of Electrical Arrangements for Upgradation of Crew Booking Lobby Building at Dhone by Providing All Specified Facilities along with Air Conditioning., 2. Improvement to colonies (including qtrs/water pipeline/ drainage/ roads, parks etc.) at DHNE, BMH & PDL Stations in ADEN/DHNE Sub-Division in Sr.DEN/Central Jurisdiction.
GTL-EM-82-2025-26
GTL-EM-82-2025-26
Open
Works - General
6 Months
Anantapur, Andhra Pradesh
₹0
₹1.1 L
30 Mar 2026
5 Mar 2026
16 Mar 2026
216 items across 2 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 22,25,963.92 | ||
| — | Item Breakup | for details. | — | ||
| Supply, Laying, Testing and Termination of 4 core 95 sq.mm XLPE insulated underground armoured aluminium cable as per IS 7098(Part 1)1988 with latest amendments with necessary lugs and terminations complete. | — | — | — | 51,524 | |
| — | Item Breakup | for details. | — | ||
| Supply and Erection of HDPE pipe of 75 mm of PE-100, PN6 class as per IS 4984-2016 with latest amendments and with suitable couplings and clamps for cable laying with all necessary accessories complete. | — | — | — | 18,100 | |
| — | Item Breakup | for details. | — | ||
| Supply, Laying, Testing and Termination of LTUG 4 core 25 sq.mm XLPE insulated PVC sheathed Aluminium armoured cable as per IS 7098 (Part 1) 1988 with latest amendments and with necessary lugs and terminations complete. | — | — | — | 82,192 | |
| — | Item Breakup | for details. | — | ||
| Supply, Laying, Testing and Termination of 1.1 KV Grade 4 core 16 sq.mm XLPE insulated PVC sheathed Aluminium armoured cable as per IS 7098(Part 1)1988 with latest amendments and with necessary lugs and terminations complete. | — | — | — | 56,992 | |
| — | Item Breakup | for details. | — | ||
| Supply and Erection of HDPE pipe of 50 mm outer dia of PE-100,PN6 class as per IS 4984-2016 with latest amendments and with suitable couplings and clamps for cable laying with all necessary accessories complete. | — | — | — | 64,000 | |
| — | Item Breakup | for details. | — | ||
| Supply and laying of 8 SWG GI wire with 40GSM Zink coated, conforming to IS:280- 2006 or latest, it is to be laid with armourd cable for earth continuity. | — | — | — | 12,000 | |
| — | Item Breakup | for details. | — | ||
| Excavation of cable trench in all types soil of size of size 400mm wide x 1 mtr. deep, and making good of the same to its original form and shape after complete including all connected materials and works up to the satisfaction of the Engineer at Site.The exact route of the HT/LT cable is to be decided in consultation with Engineer in charge. | — | — | — | 15,042 | |
| — | Item Breakup | for details. | — | ||
| Excavation of cable trench duly breaking the existing cement concrete flooring and filling with layer of sand bricks etc.,as per the standards of cable laying (A minimum of 1mtr depth and 400 mm width) and filling the trench with soil duly ramming etc.The flooring shall be made good with cement concrete as original by the contractor after completion of trenching work up to the satisfaction of the Engineer at Site.The exact route of the HT/LT cable is to be decided in consultation with Engineer in charge. | — | — | — | 17,920 | |
| — | Item Breakup | for details. | — | ||
| Excavation of cable trench under the Track/Road below 3mtrs. horizontal drilling bore with Hydrallic Jack suitable size for provision of 160/110/50mm dia GI/HDPE pipe | — | — | — | 43,140 | |
| — | Item Breakup | for details. | — | ||
| Supply and Erection of Power cable route indicators with all connected materials and works as per Drawing No.DEE/CN/BZA/2001/23. | — | — | — | 260 | |
| — | Item Breakup | for details. | — | ||
| Supply, Erection and connecting of Cable Junction Boxes IP 55 / IP 65 with metric knockouts for cable entry Cable junction boxes of model no. K 9255 of Hensel make or equivalent make conforming to IS:13573/92,IEC 60947-3 with necessary terminals suitable for cables upto 25 Sq mm and all necessary accessories complete. | — | — | — | 3,540 | |
| — | Item Breakup | for details. | — | ||
| Supply and Erection of of LED flood light fittings 60 W with all connected accessories as per attached railway specification. | — | — | — | 46,420 | |
| — | Item Breakup | for details. | — | ||
| Supply and Erection of LINNET Aesthetically designed linear mirror LED light 7W Provided with a high output PMMA diffuser for glare free light conforming to IS:10322 of model no. LCL-07-CDL of Crompton make or it's equavalent make with all necessary accessories complete as per attached railway specification | — | — | — | 3,948 | |
| — | Item Breakup | for details. | — | ||
| Supply and fixing of 20W 4 feet LED tube light with all connected accessories complete for fixing (The supply includes accessories such as clamps, ties for extension wires etc for fixing) as per attached railway specification | — | — | — | 11,703 | |
| — | Item Breakup | for details. | — | ||
| Supply and erection of 40W 4 feet LED tube light, with all connected accessories complete for fixing (The supply includes accessories such as clamps, ties for extension wires etc for fixing) as per attached railway specification. | — | — | — | 21,479.4 | |
| — | Item Breakup | for details. | — | ||
| Supply and Erection of Recess / Surface mounting 18 W LED Square panel lighter (22.5*22.5*2.0CM) as per attached railway specification with all connected acessories. | — | — | — | 15,502.6 | |
| — | Item Breakup | for details. | — | ||
| Supply and Erection of 1ft x 1 ft size, 22 W LED Recess / Surface mounting panel Light fitting as per attached railway specification with all connected acessories. | — | — | — | 48,657.8 | |
| — | Item Breakup | for details. | — | ||
| Supply of cool day light chrome LED Recess / Surface mounting panel ceiling light 1 x 4 ft 36 watts LED comfortable to Indian standards with IS:10322-05-02(2012) with consisting features.(1) Colour Temp: 6500 K as per attached railway specification with all connected acessories. | — | — | — | 1,02,000 | |
| — | Item Breakup | for details. | — | ||
| Supply and Erection of 50mm dia GI Pipe 'B' class with threaded at both ends up to 75mm length with coupling/flanges complete confirming to IS: 1239 (Part-I) 2004 with its latest amendments. | — | — | — | 18,300 | |
| — | Item Breakup | for details. | — | ||
| Supply and erction of 80mm dia GI Pipe 'B' class with threaded at both ends up to 75mm length with coupling/flanges complete confirming to IS: 1239(Part-I)2004 including Joints, bends couplings and all necessary accessories complete. | — | — | — | 29,500 | |
| — | Item Breakup | for details. | — | ||
| Supply and erection of 100mm dia GI Pipe (Medium ) 'B' class with threaded at both ends up to 75mm length with coupling/flanges complete confirming to IS: 1239(Part-I)2004 including Joints, bends couplings and all necessary accessories complete. | — | — | — | 64,450 | |
| — | Item Breakup | for details. | — | ||
| Supply and fixing of Hand Dryer as per IS:302-2-30:2007 or latest. Make:Dyson, Dryflow, D-flow, Turboforce. | — | — | — | 14,375 | |
| — | Item Breakup | for details. | — | ||
| Cutting of groove in the wall,plastering of surface to the original forc oncealing of the conduit in the wall(Laying and fixing of conduit will bepaid separately) | — | — | — | 6,300 | |
| — | Item Breakup | for details. | — | ||
| Supply and running of 32 mm dia, Ivory coloured PVC conduit of wall thickness not less than 2 mm with junction boxes, bends and all accessories etc as required as per site requirement. Running of conduit, fixing with suitable clamps and nuts in groove / open /shelter | — | — | — | 8,890.5 | |
| — | Item Breakup | for details. | — | ||
| Supply and Running of 25 mm dia, Ivory coloured PVC conduit ( ISI marked) of wall thickness not less than 2 mm along with junction boxes, bends and all accessories etc. as required as per site requirement. Running of conduit, fixing with suitable clamps and nuts in groove / open /shelter | — | — | — | 29,184 | |
| — | Item Breakup | for details. | — | ||
| Provision of concealed wiring with two runs of 1.5 Sq.mm 1100 Volts and one run of flexible copper conductor 1.5 Sq.mm 1100 Volts FRLS PVC insulated wires ISI marked (Phase, neutral and earth)( up to 10 meters length) (Rate arrived, considering an average of 7 meters per point) in the PVC conduit pipe with 6A flush modular type switch including 2 way switches where ever required, ceiling rose, bulb holder and modular type plate cover to MS switch control box including all labour charges complete for light points, ceiling fans and exhaust fans points cat walk points and ioh service building points etc. accessories. | — | — | — | 47,047 | |
| — | Item Breakup | for details. | — | ||
| Supply and run of 2 nos, 2.5 sqmm, 1100 V PVC (FRLS) insulated flexible copper conductor wires and one run of 1.5 sqmm PVC (FRLS) insulated flexible copper cable for earthing in existing PVC conduit Pipe conforming to IS 694 (2010) or its latest amendments. | — | — | — | 1,02,000 | |
| — | Item Breakup | for details. | — | ||
| Supply and run of 2 nos, 4.0 sqmm, 1100 V PVC (FRLS) insulated flexible copper conductor wires and one run of 2.5 sqmm PVC (FRLS) insulated flexible copper cable for earthing in existing PVC conduit pipe conforming to IS 694 (2010) with latest amendements. | — | — | — | 1,15,500 | |
| — | Item Breakup | for details. | — | ||
| Supply and run of 2 nos, 6.0 sqmm, 1100 V PVC (FRLS) insulated flexible copper conductor wires and one run of 2.5 sqmm PVC (FRLS) insulated flexible copper cable for earthing in existing PVC conduit/Casing and capping pipe. | — | — | — | 54,285 | |
| — | Item Breakup | for details. | — | ||
| Supply, fixing, connecting and commissioning of 6A 3pin/5pin modular plug socket, with 6A modular control switch on existing control board with wiring. | — | — | — | 52,699.5 | |
| — | Item Breakup | for details. | — | ||
| Supply and fixing of 16 Amps 3/5 pin flush type power plug and socket with modular type switch control including all accessories. | — | — | — | 13,007.4 | |
| — | Item Breakup | for details. | — | ||
| Supply and fixing of 6A Bell push switch with indicator conforming to IS:3854 model no.AHLSBIW100/060, one module cover plate model no.AHLPLCWV01, 1/2 module flush metal box model no.AHZXMIZX01 of Havells make or equivalent make including all other connected accessories complete. | — | — | — | 20,266 | |
| — | Item Breakup | for details. | — | ||
| Supply and fixing of Angle Holder similar to model no. of AHLHXAW000 of Havells make or equivalent make with necessary screws and all accessores complete. | — | — | — | 1,410 | |
| — | Item Breakup | for details. | — | ||
| Supply and fixing of Jumbo plate for Holder similar to model no. of ASSPGW002 of Havells or equivalent make with necessary screws and all accessores complete. | — | — | — | 2,351 | |
| — | Item Breakup | for details. | — | ||
| Supply, Erection, Testing and Commissioning of Maintenance free earthing with all necessary accessories complete according to IS 3043-1987 and as per RDSO spec No: rdso/spec/ps/0109(rev.0)-2008 Amendment'1'. | — | — | — | 71,565 | |
| — | Item Breakup | for details. | — | ||
| Provision of mobile Charging Arrangements with following accessories (i)3 x 6 Amps one way modular switch (as per IS 3854:1997 with its latest amendments) (ii) 3 x International Socket 13/6 Amps (iii)1 x 16A SP MCB (iv) 12 module or suitable Plastic Enclosures with Cover plate for Surface Mounting, (v) Supply and fixing of 02 No's of dummy plates in the 12 modular plastic encloseure including Fixing of Charging point on the Wall/Pillers/Structure with suitable clamps/ rag bolts etc complete including all other connected materieals and accessories. | — | — | — | 5,405 | |
| — | Item Breakup | for details. | — | ||
| Supply and installation of high quality statinless steel mobile charging stand to provide at staions made stainless steel (2 mm thick)material with dimension 24cm*22cm* 4cm which is light weigt and tough at the same time look bright and elegant with mirror polish with three screw holes to easily fix on wall /pillar structure with suitable clamps/rag bolts etc complete. | — | — | — | 2,000 | |
| — | Item Breakup | for details. | — | ||
| Supply and fixing of metal flush box-12 module of model no:JIM 12 008 of GM FOURFIVE make or its equivalent with 12 module cover plate (With support frame) of model no:PK SB 12 007 - CASABLANCA of GM make or equivalent make comply with IEC 60669-1 with its latest amendments including all accessories complete. | — | — | — | 6,255 | |
| — | Item Breakup | for details. | — | ||
| Supply and Fixing of metal flush box-8 module of model no:JIM 08 005/6 of GM FOURFIVE make or its equivalent with 8 module cover plate (With support frame) of model no:PK SB 08 011 - CASABLANCA of GM make or equavalant make comply with IEC 60669-1 with its latest amendments including all accessories complete. | — | — | — | 3,600 | |
| — | Item Breakup | for details. | — | ||
| Supply and fixing of metal flush box-6 module of model no:JIM 06 004 of GM FOURFIVE make or its equivalent with 6 module cover plate (With support frame) of model no:PK SB 06 005 - CASABLANCA of GM make or equavalant make comply with IEC 60669-1 with its latest amendments including all accessories complete. | — | — | — | 2,680 | |
| — | Item Breakup | for details. | — | ||
| Supply and fixing of metal flush box-4 module of model no:JIM 04 003 of GM FOURFIVE make or its equivalent with 4 module cover plate (With support frame) of model no:PK SB 04 004 - CASABLANCA of GM make or equavalant make comply with IEC 60669-1 with its latest amendments including all accessories complete. | — | — | — | 2,230 | |
| — | Item Breakup | for details. | — | ||
| Supply and Erection of energy efficient BLDC star electric ceiling fan of 1200mm sweep as per attached railway specification and including necessary plastering, Massinory work and clamps nuts bolts etc... | — | — | — | 84,846.9 | |
| — | Item Breakup | for details. | — | ||
| Supply and fixing of BLDC star 200 mm 20W 1600 R P M Exhaust fans including necessary plastering, Massinory work and clamps nuts bolts etc. | — | — | — | 16,464 | |
| — | Item Breakup | for details. | — | ||
| Supply and fixing of BLDC Air circulators 400 mm sweep with 1500 RPM 32W Equivalent to EFFICIO + model of Atomberg Make including necessary plastering, Massinory work and clamps nuts bolts etc. | — | — | — | 9,620 | |
| — | Item Breakup | for details. | — | ||
| Supply of self contained drinking water cooler of capacity 150 Lrs cooling capacity and 150 Ltrs storage capacity, confirm to IS: 1475 (part-i) 2001 suitable for operation on 230 Volts +10%, 50 Hz single phase AC supply with latest amendments etc... | — | — | — | 45,579 | |
| — | Item Breakup | for details. | — | ||
| Supply and fixing of ON Delay/Interval timer in above junction box of Supply Voltage - 20-240VAC, 50/60Hz Model - 800XU of Selec make. | — | — | — | 5,780 | |
| — | Item Breakup | for details. | — | ||
| supply and fixing of 3 Pole AC Power Contactor 25 Amp 1 NO 1NC AC 3 PH 415 V Coil Voltage 110 V AC Aux. | — | — | — | 4,855 | |
| — | Item Breakup | for details. | — | ||
| Supply and installation of 5.0KVA, 180 / 192V DC true online UPS system IGBT technology pure sine wave out put, double conversion with auto and manual static by pass switch single phase input / Single phase output confirming to IS:13314 or its latest amendments for inverter. | — | — | — | 1,22,618 | |
| — | Item Breakup | for details. | — | ||
| Supply and Fixing of battery rack for 5 to 10 batteries (42 AH). | — | — | — | 7,246.8 | |
| — | Item Breakup | for details. | — | ||
| Supply and fixing of 12V 26 AH SMF battery with 3 years Warrenty, including wire leads ,connections etc complete. Make: Quanta / Racket / Exide. | — | — | — | 46,379.52 | |
| — | Item Breakup | for details. | — | ||
| Supply, installation, testing, connecting and commissioning of 2.0 Ton capacity Hi wall split inverter Air conditioner 5 star rated with hermitically sealed Copper Condensor and ISEER 5.6-6, R-32 Refrigerant including all accessories & fixing of Outdoor Mounting Stand etc with required lenght of the cables between indoor and outdoor units Note: (1) AC unit supplied to railways must match with the BEE Star Rating valid as on the date of supply. (2)The Product must be registered, on the name of Consignee, with OEM, after successful installation. | — | — | — | 3,69,000 | |
| — | Item Breakup | for details. | — | ||
| Supply, installation, testing and commissioning of Energy Saver for air conditioning units for 2T Capacity having memory based micro controller, with Dual sensor & display for room and coil temperature, measures room /coil/ ambient temperatures- features A 10-PT programmable menu and a remote to change your set temperature, which constantly analyses the temperature transfer profiles between the air and evaporator coil. (Warranty Period : Upto 30 months from the date of delivery.) | — | — | — | 71,083.2 | |
| — | Item Breakup | for details. | — | ||
| Supply and fixing of wall/floor mounting type Voltage stablizer of V-Guard VG 500 Voltage Stabilizer for AC up to 2 Ton (170 - 270 V) with all connected accessories and works. | — | — | — | 11,880 | |
| — | Item Breakup | for details. | — | ||
| Supply and fixing of 16A combined unit with concealed metal box with 4M cover Plate + 16A c curve MCB + 16A Socket + 16A Magnus plug top equivalent to model no: AA 4 068 of GM make(glossy white) for AC points. | — | — | — | 4,045.8 | |
| — | Item Breakup | for details. | — | ||
| Supply fixing connecting and comissioning of 12 way SPN Distribution board 12 module of model no. 507612 with metal door of legrand make or equivalent make with all connecting accessories complete. | — | — | — | 5,184 | |
| — | Item Breakup | for details. | — | ||
| Supply and fixing of SPN DB's, 8 way 8 module confirming to IEC:61439 with its latest amendment IP 43 with metal door model no.507611 of legrand make or its equivalent make | — | — | — | 4,312 | |
| — | Item Breakup | for details. | — | ||
| Supply, fixing and connecting of 2 pole 2 module 32A Lexic RCBOs conforming to IS 12640-2(2008) or latest as advised by the site supervisor with all necessary accessories complete | — | — | — | 17,489.5 | |
| — | Item Breakup | for details. | — | ||
| Supply, fixing and connecting of 2 pole 2 module 16A/25A Lexic RCBOs conforming to IS 12640-2(2008) or latest as advised by the site supervisor with all necessary accessories complete. | — | — | — | 33,978 | |
| — | Item Breakup | for details. | — | ||
| Supply and fixing of 63 A 4P MCB C Curve, 10 KA capacity with necessary connections and all accessores complete. | — | — | — | 16,644 | |
| — | Item Breakup | for details. | — | ||
| Supply and erection of 32A, C-curve 3P MCBs with 10KA breaking capacity with all necessary accessories complete. | — | — | — | 8,532 | |
| — | Item Breakup | for details. | — | ||
| Supply and Erection of B curve 16A DP MCBs of Rated Short-Circuit Breaking Capacity 10kA of IP 20 Protection ISI / CE Marked as per IS/IEC 60898 - 1 or its latest amendments with all connected accessories. | — | — | — | 6,626 | |
| — | Item Breakup | for details. | — | ||
| Supply and Erection of B curve 6A SP MCBs of Rated Short-Circuit Breaking Capacity 10kA of IP 20 Protection ISI / CE Marked as per IS/IEC 60898 - 1 or its latest amendments with all connected accessories. | — | — | — | 2,300 | |
| — | Item Breakup | for details. | — | ||
| Supply and Erection of B curve 10A SP MCBs of Rated Short-Circuit Breaking Capacity 10kA of IP 20 Protection ISI / CE Marked as per IS/IEC 60898 - 1 or its latest amendments with all connected accessories. | — | — | — | 2,300 | |
| — | Item Breakup | for details. | — | ||
| Excavation of earth for one pit in any soil and refilling as per Drg.NO. RE/33/P702/ MOD.F | — | — | — | 3,293.3 | |
| — | Item Breakup | for details. | — | ||
| Supply and erection of "B' class GI pipe dia 50mm, 3.1 mtrs length with 3.65 mm thickness including GI socket and nuts (3.1 mtrs ) including drilling of 12mm holes as per the RDSO Drg No. ETI/OHE/P/ 7021 (MOD.A) or if any latest. | — | — | — | 16,876.6 | |
| — | Item Breakup | for details. | — | ||
| Drilling of 26 Nos of 12 mm dia holes on GIpipe dia 50 mm | — | — | — | 1,615 | |
| — | Item Breakup | for details. | — | ||
| Supply and Erection of Charcoal | — | — | — | 5,031 | |
| — | Item Breakup | for details. | — | ||
| Supply and Erection of Salt | — | — | — | 3,479 | |
| — | Item Breakup | for details. | — | ||
| Provision of RCC earth pit hollow box of size 300 mm x 300 mm x300mm with 50 mm wall thickness as per Drg. no. SDO/RDSO/E&B/001 by using M20 Grade pre-cast RCC. Supply and Erection of RCC pre-cast slabs with hook to cover Earth pits of dimensions as shown in IRSEM drg no 19-D6. All the required materials for this work i.e. stones, cement, iron and sand etc. are to be supplied by contractor.). Inspection by Consignee. | — | — | — | 8,698.6 | |
| — | Item Breakup | for details. | — |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
SCOPEOFWORKFORWiring.pdf
ATTACHMENT
EARTHINGCOMBINEDSPEC-MFE.pdf
ATTACHMENT
CEGETechnicalCircular_compressed.pdf CEGE Technical Circular
ATTACHMENT
GCC April 22 With Correction Slips
ATTACHMENT
Technicalspecifications-43-68.pdf
ATTACHMENT
GCC_April-2022WithCorrectionSlips..pdf
ATTACHMENT
CEGETechnicalCircular_compressed.pdf
ATTACHMENT
RITESInspectionLr..pdf
ATTACHMENT
ListofLikelySuppliers.pdf
ATTACHMENT
MasterTenderdocumentGTL-EM-82-2025-26.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .