Loading
Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
31 Oct 2026, 6:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
GE (S) BINNAGURI
GE (SOUTH) BINNAGURI, PO - BINNAGURI, DISTT - JALPAIGURI, PIN - 735232
As per tender docus
2026_MES_766250_2
8876/E8
Open Tender
Civil Works
Item Rate
180 days
GE (S) BINNAGURI
Class E and Category a(i)
7 documents required · 7 mandatory
₹500
GE (S) BINNAGURI
₹40,000
Yes
17 Oct 2026
17 Oct 2026
2 Nov 2026
17 Oct 2026
31 Oct 2026
24 Oct 2026
17 Oct 2026 - 24 Oct 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Taking down chowkats or frames exc 1.5 sqm but not exc 4.0 Sqm each with shutters ( with out taking off shutters from the frames) complete all as specified | 25 | Each | - | - |
| 2 | Taking down shutters of any description exc1.00 Sqm but not exc 2.00 Sqm each complete all as specified | 20 | Per Leaf | - | - |
| 3 | Taking down chowkats or frames not exc 1.5 Sqm each with shutters ( with out taking off shutters from the frames) complete all as specified . | 10 | Each | - | - |
| 4 | Supply and fix profile pressed steel door frames of overall size 125 mm x 60 mm with single or double rebate, conforming to IS 4351, at all heights and levels, comprising: cold-rolled mild steel sheet (minimum thickness 1.25 mm to 1.60 mm); mitred, electrically welded corner joints; base tie rods; adjustable MS holdfast fixing lugs; factory-welded 100 mm MS butt hinges; mortise lock striking plate; shock-absorbing rubber buffers; applying one shop coat of zinc chromate red oxide primer before erection; bedding and grouting solid with cement concrete (1:2:4) or cement mortar (1:3), complete all as specified.
Makes of Pressed Steel Door Frames: Tata Steel [Pravesh] / Jindal Steel / Steel Authority of India Ltd [SAIL] / Shree Steel / AGV Steel / Godrej / Shakti Hormann or approved equivalent as in the list of Makes). | 43.2 | RM | - | - |
| 5 | M & L for providing plain cement concrete type C-1, 1:3:6, (using 20 mm graded stone aggregate), as in copings, bed block for filing hollow space of steel chowkhats, fixing of hold fast, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified | 0.32 | Cum | - | - |
| 6 | S&F 30mm flush shutter, solid core construction, with block board core and plywood face panel, commercial type on both side etc complete all as specified | 20.16 | Sqm | - | - |
| 7 | Supply and fixing of factory made partly glazed three panels i.e. upper panel will be wire mesh and further divided into two panels fitted externally in the clear space & lower panel will be plain colour PVC sheet 5mm thick PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail,; Paneling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as per specified | 25.2 | Sqm | - | - |
| 8 | S & F for solid PVC door frame of size 50x47mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supplied and fixing in opening as specified and shown on drawing made on section 8 of SSR 2010 Part-II complete all as specified | 67.5 | RM | - | - |
| 9 | S & F factory made solid panel PVC door shutter 30 mm thick style consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC “C” channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, S & F in the frame as shown on drawing in section 8 of SSR-2010 Part-II complete all as specified | 24.3 | Sqm | - | - |
| 10 | M&L Second class hard wood 30 mm thick factory made glazed and skeleton windows, ventilators shutters, open rebated and prepared to receive glass , gauze etc, divided into square,with plain, chamfered or rounded,mitered and rebated sash bars,any number, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, size of members of shutters as specified in SSR part I section 8 clause 8.20 (b) complete all as specified | 30 | Sqm | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.50 MB
Specialcondition_8876.pdf
Tender Documents • 0.43 MB
Indexpages_8876.pdf
Tender Documents • 0.57 MB
PS_8876.pdf
Tender Documents • 0.74 MB
BOQ_887400.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .