A/R and M/O to HPPWD., Division office building at Joginder Nagar District Mandi (H.P.)

Amount

"A" Civil Work: Second class brick work using common burnt clay building bricks of approved kiln in super structure above upto floor three level to floor four level in cement mortar 1:6 (one cement : six sand) including curing complete and carriage of materials within all leads and lifts complete in all respect.

Second class half brick masonry in common burnt clay building bricks of approved kiln in super structure above plinth level upto floor all level in cement mortar 1:4 (One cement : four sand) and curing complete including carriage of materials within all leads and lifts complete in all respect.

Providing form work with steel plates 3.15mm (Three point one five millimetre) thick welded with angle iron in frame 30x30x5mm (Thirty into thirty into five millimetre) so as to give a fair finish including centering, shuttering, strutting and propping etcetra with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in beam, cantilever, girders and lintels, sides and soffits of beams beams haunching below supporting cantilevers girders bressumers and lintels of any depth including carriage of materials within all leads and lifts complete in all respect.

Providing and laying cement concrete 1:2:4 (one cement : two sand : four graded/crushed stone aggregate 20mm (twenty millimetre) nominal size and curing complete excluding cost of form work and reinforcement for reinforced concrete work in suspended floor roofs, landings and shelves and their supports, balconies, beams, girder bressumers and cantilever upto all floor level including carriage of material within all leads and lifts complete in all respect.

Providing Tor steel reinforcement for RCC work including bending binding and placing in position including cost of binding wire complete in all floors including carriage of materials within all leads and lifts complete in all respect.

Providing and fixing M.S. angle iron door, window,clerestory window manufactured from M.S. angle iron section of 40x40x6mm (forth into forty into six millimetre) thickness including hinges jambs, lock jambs beed and if required angle thrashold of mild steel angle 50x25mm (fifty into twenty five millimetre) welded or rigidly fixed by machanical means, lugs with split end tails to each jambs including steel butt hinges 2.5mm (two point five millimetre) thick with provision for locking arrangement and shock observer as specified and applying a coat of approved steel primer after pre treatment of the surface as directed by Engineer-In-Charge including carriage of materials within all leads, lifts and other incidental charges complete in all respect.

Providing and fixing standard steel section of ISMC and flat iron doors, windows and clerestory window manufactured from ISMC iron section 75x40mm (seventy five into forty millimetre) with MS flat iron section of 75x4mm (seventy five into four millimetre) thick including hinges, jambs, lock jamb,beed and if required angle thrashold of mild steel angle 50x25mm (fifty into twenty five millimetre) welded or rigidly fixed by machanical means, lugs with split end tails to each jambs including steel butt hinges 2.5mm (two point five millimetre) thick with provision for locking arrangement and shock observer as specified and applying a coat of approved steel primer after pre treatment of the surface as directed by Engineer-In-Charge including carriage of materials within all leads, lifts and other incidental charges complete in all respect.

Providing and fixing steel glazed doors, windows, and ventilators of standard rolled steel sections, joints mitred and welded with (Manufactured to relevant I.S. standard specifications) 16x3.15mm (Sixteen into three point one five millimetre)lugs 10cm (ten centimetre) long embedded in cement concrete blocks 15x10x10cm (fifteen into ten into ten centimetre)size of 1:3:6 (One cement :three sand :six graded/crushed crushed stone aggregate twenty millimetre nominal size) or with wooden plugs and screws or rawl plug and screws or with fixing clips or with bolts and nuts as required and iron fittings,including providing and fixing of projecting hinges, handles pegstays bolting device locking arrangement spring catch etcetra and providing and fixing of 4mm (four millimetre) thick glass panes with glazing clips and special metal sash putty of approved make complete including applying a priming coat of red lead paint and carriage of materials within all leads and lifts complete in all respect as per direction of Engineer in Charge.Fixed steel windows.

Providing and fixing steel glazed doors, windows, and ventilators of standard rolled steel sections, joints mitred and welded with (Manufactured to relevant I.S. standard specifications) 16x3.15mm (Sixteen into three point one five millimetre)lugs 10cm (ten centimetre) long embedded in cement concrete blocks 15x10x10cm (fifteen into ten into ten centimetre)size of 1:3:6 (One cement :three sand :six graded/crushed crushed stone aggregate twenty millimetre nominal size) or with wooden plugs and screws or rawl plug and screws or with fixing clips or with bolts and nuts as required and iron fittings,including providing and fixing of projecting hinges, handles pegstays bolting device locking arrangement spring catch etcetra and providing and fixing of 4mm (four millimetre) thick glass panes with glazing clips and special metal sash putty of approved make complete including applying a priming coat of red lead paint and carriage of materials within all leads and lifts complete in all respect as per direction of Engineer in Charge.Side hung window.

Providing and fixing steel glazed doors, windows, and ventilators of standard rolled steel sections, joints mitred and welded with (Manufactured to relevant I.S. standard specifications) 16x3.15mm (Sixteen into three point one five millimetre)lugs 10cm (ten centimetre) long embedded in cement concrete blocks 15x10x10cm (fifteen into ten into ten centimetre)size of 1:3:6 (One cement :three sand :six graded/crushed crushed stone aggregate twenty millimetre nominal size) or with wooden plugs and screws or rawl plug and screws or with fixing clips or with bolts and nuts as required and iron fittings,including providing and fixing of projecting hinges, handles pegstays bolting device locking arrangement spring catch etcetra and providing and fixing of 4mm (four millimetre) thick glass panes with glazing clips and special metal sash putty of approved make complete including applying a priming coat of red lead paint and carriage of materials within all leads and lifts complete in all respect as per direction of Engineer in Charge.Top hung ventilator.

Providing and fixing steel wire guage shutter in Z- section using galvainsed MS wire gauge of IS gauge designation 85g (eighty five gauge) with wire of diametre 0.56mm (zero point five six millimetre) for doors, windows and clearestory windows including metal beading of approved quality and shape section with necessary steel screws inluding applying a priming coat of red lead paint complete as per approved specification/design including carriage of materials within all leads, lifts and other incidental charges complete in all respect.

Providing and fixing 40mm (forty millimetre) thick second class deodar wood panelled glazed or panelled and glazed shutter for doors windows and clere story windows including black enameled iron butt hinges with necessary screws including carriage of material within all leads, lifts and other incidental charges complete in all respect.

Providing and fixing 40mm (forty millimeter) thick second class deodar wood wire gauge shutters using galvanized MS wire gauge of IS gauge designation 85g (Eighty five) gauge with wire of diameter 0.56mm (zero point five six millimeter) for doors, windows and clerestorey windows including bright finished black enamelled iron hinges with necessary screws including carriage of material with in all leads, lifts and other incidental charges complete in all respect.

Providing and laying viterified tiles in flooring treads of steps laid on a bed of 12mm (twelve millimetre) thick cement mortar 1:3 (one cement : three sand) finished with flush pointing in white cement as per satisfaction of Engineer-In-Charge upto floor all level including carriage of materials within all leads and lifts complete in all respect.

Providing and laying viterified tiles in skiring and risers of steps upto any height laid on a bed of 12mm (twelve millimetre) thick cement mortar 1:3 (one cement : three sand) finished with flush pointing in white cement as per satisfaction of Engineer-In-Charge upto floor all level including carriage of materials within all leads and lifts complete in all respect.

Providing and fixing 0.60mm (zero point six zero millimetre) thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 (twenty) microns over 5 (five) microns primer coating to back coat of polyster 5 (five) microns over 5 (five) microns primer coating including fixing with screws prepainted iron J or L hooks, bolts and nuts 6mm (six millimetre) diametre with prepainted limpet and rubber washers complete with all accesoriees as required as per the direction of Engineer-In-Charge including carriage of material within all leads and lifts complete in all respect.

Providing and fixing ridges or hips 60cm (sixty centimetre) overall with 0.60mm (zero point six zero millimetre) thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheets with top coat of regular modified polyster organic coating of 20 (twenty) microns over 5 (five) microns primer coating plus back coat of polyster of 5 (five) microns over 5 (five) microns primer coating icluding fixing with screws prepainted iron J or L hooks, bolts and nuts 6mm (six millimetre) diametre with prepainted GI limpet and bitumen washers complete with all accesoriees as required as per the direction of Engineer-In-Charge including carriage of material within all leads and lifts complete in all respect.

Providing and fixing valley 60cm (sixty centimetre) overall with 0.60mm (zero point six zero millimetre) thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster 5 (five) microns over 5 (five) microns primer coating icluding fixing with screws prepainted iron J or L hooks, bolts and nuts 6mm (six millimetre) diametre with prepainted GI limpet and bitumen washers complete with all accesoriees as required as per the direction of Engineer-In-Charge including carriage of material within all leads and lifts complete in all respect.

Providing and fixing 0.80mm (zero point eight zero millimetre) thick 15cm (fifteen centimetre) wide and 45cm (forty five centimetre) overall cemicercular plain GI sheet gutter with iron brackets 40x3mm (forty into three millimetre) size bolts and nuts and wahers etcetera including making necessary connection with rain water pipe complete as per design including carriage of materials within all leads and lifts complete in all respect.

Providing and fixing 100mm (one hundred millimetre) diametre pipes on wall face PVC (D-Plast) rain water pipes of working pressure not less than 4.5kg/sqm (four point five kilogram per square metre) including filling the joints with approved adhesive complete including carriage of materials within all leads, lifts and other incidental charges.

Providing and fixing PVC plain bend 150mm (one hundred fifty millimetre) diametre on wall faces PVC (D-Plast) accessories for rain water pipes including filling the joints with approved adhesive complete including carriage of materials within all leads, lifts and other incidental charges.

Providing and fixing 100mm (one hundred millimetre) diametre pipes MS holder bat clamps of approved design to CI on SCI pipes embeded in and including cement concrete blocks 10x10x10cm (ten into ten into ten centimetre) of 1:2:4 (one cement : two sand : four graded/crushed/crushed stone aggregate 20mm (twenty millimetre) nominal size) and cost of cutting holes and making good the wall etcetra including carriage of material within all leads lifts and other incidental charges complete in all respect.

Providing and fixing MS BP sheet 1.66mm to 2mm (one point six six millimetre to two millimetre) thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-In-Charge (Base members of steel work shall be measured & paid separately) including carriage of materials within all leads, lifts and other incidental charges.

Steel work welded in built up sections trusses and framed work including cutting, hoisting, fixing and launching in position and applying a priming coat of red lead paint in trusses and trussed purlins in buildings including carriage of materials within all leads and lifts complete in all respect.

Steel work welded in built up sections, trusses and framed work including cutting hoisting and fixing and launching in position and applying a priming coat of red lead paint in beams, joists, channels, angles, tees flats with connecting plates or angle cleats in main and cross beams, hip and jack rafters purlins connected to common rafters and the like including carriage of materials within all leads and lifts complete in all respect.

Providing and fixing 8mm (eight millimetre) thick cement bounded partical board ceiling of approved quality butt jointing and nail (frame work and cover fillets to be paid for seperately) including carriage of materials within all leads and lifts complete in all respect.

Supplying and fixing plain glass 4mm (four millimetre) thick panes with putty and nials including removal of broken glass panes wherever necessary including carriage of materials within all leads, lifts and other incidental charges complete in all respect.

Providing and fixing first class deodar wood 12mm (twelve millimetre) thick and 100mm (one hundred millimetre) wide pelmet with 25mm (twenty five millimetre) diametre wooden curtain rod and brackets including fixing with 25x3mm (twenty five into three millimetre) M.S flats 10Cm (ten centimetre) long and plugs etcetra complete including carriage of material within all leads lifts and other incidental charges complete in all respect.

Providing and fixing 250x16mm (Two hundred fifty into sixteen millimeter) anodized heavy duty aluminum sliding door bolt anodized transparent or died to required colour and shade with bolts and nuts screws etcetra as approved by the Engineer-In-Charge complete including carriage of materials within all leads and lifts complete in all respect.

Providing and fixing 150x10mm (One hundred fifty into ten millimeter) heavy duty aluminum tower bolts (Barrel type) anodized transparent or dyed to required shade and colour with screws etcetra as approved by the Engineer-In-Charge complete in all respect including carriage of materials within all leads and lifts complete in all respect.

Providing and fixing 125mm (One hundred twenty five millimetre) mat finish aluminum heavy duty handles anodized transparent or dyed to required shade and colour with necessary screws etcetra as approved by the Engineer-In-Charge including carriage of materials within all leads and lifts complete in all respect.

Providing and fixing 150mm (one hundred fifty millimetre) oxidized MS single acting spring hings bright finished with necessary screws etcetera complete as approved by the Engineer-In-Charge including carriage of materials within all leads and lifts complete in all respect.

Providing and fixing 200mm (two hundred millimetre) oxidized MS hooks and eyes approved by the Engineer-In-Charge including carriage of materials within all leads and lifts complete in all respect.

15mm (Fifteen millimeter) cement plaster in single coat on rough side of brick/concrete/stone walls for interior plastering upto floor all level including arrises, internal rounded angles, chamfers and or rounded angles not exceeding 80mm (eighty millimeter) in girth and finished even and smooth in cement mortar 1:6 (one cement : six sand) including curing complete and carriage of materials within all leads and lifts complete in all respect.

15mm (fifteen millimetre) cement plaster in single coat on the fair side of brick/concrete/stone walls for interior/exterior plastering upto floor all level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm (eighty millimetre) in girth and finished even and smooth in cement mortar 1:6 (one cement : six sand) including curing and carriage of materials within all leads and lifts complete in all respect.

Applying Birla White wall care putty over plaster surface after throughly brushing the suface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the suface including carriage of materials within all leads and lifts complete in all respect.

Distempering (Two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after throughly brushing the surface free from mortar droopings and other foreign matter and also including preparing the surface even and sand papered smooth on walls including carriage of material with in all leads, lifts and other incidentals complete in all respect.

Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on undecorated wall surfaces (two coats) to give an even shade after throughly brushing the surface to remove all dirt loose powdered materials including carriage of materials within all leads and lifts complete in all respect.

Applying priming coat over new wood and wood based surface after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter, sand papering and knotting with ready mixed paint brushing wood primer pink complete including carriage of materials within all leads and lifts complete in all respect.

Painting two coats (excluding priming coat) on new wood and wood based surfaces, with white enamel paint to give an even shade including cleaning the surface of all dirt, dust and other foreign matter, sand papering and stopping including carriage of materials within all leads and lifts complete in all respect.

Painting two coats (excluding priming coat) on new steel and other metal surfaces with enamel paint other than white brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter including carriage of materials within all leads and lifts complete in all respect.

Water Supply and Sanitary Installation: Providing and fixing veterious China wash down water closet (European type W.C. pan) with integral “P” or “S” trap including jointing the trap with soil pipe in cement mortar 1:1 (one cement :one sand) (seat and cover to be measured and paid for separately) complete in all respect including carriage of materials within all leads and lifts.

Providing and fixing 10 to 12.50 ltrs (ten to twelve point five liters) vertious china low level flushing cistern with a pair mild steel bracket compete with fitting such as lead valve less syphon, 15mm (fifteen millimeter) nominal size brass ball valve with polythine float, C.P. brass handles unions and coupling for connections with inlet outlet and over flow pipes 40mm (forty millimeter) diameter C.P. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (over flow pipe to be measured and paid for separately) including carriage of materials within all leads and lifts complete in all respect.

Providing and fixing plastic seat (sold/hollow type) and cover for wash down water closet with CP brass hinges and rubber buffers solid type with white plastic seat and cover including carriage of materials within all leads and lifts complete in all respect.

Providing and fixing PTMT jet spray of approved quality and colour with one metre tube complete in all respect including carriage of material with in all leads lifts and other incidentials.

Providing and fixing flat back 550x400mm (five hundred fifty into four hundred millimeter) vitreous china wash basin with single hole for pillar tap with CI or MS brackets painted white including cutting holes and making good the same but excluding fittings complete in all respect including carriage of materials within all leads and lifts.

Providing and fixing viteous china bowl pattern urinal including connecting the urinal with waste pipe by means of white lead mixed with chopped hemp (wast pipe to be measured and paid separately) flat back type of size 430mmx260mmx350mm (four hundred thirty into two hundred sixty into three hundred fifty millimeter ) including carriage of materials within all leads and lifts complete in all respect.

Providing and fixing vitreous China division Plate for urinals 600mmx300 mm (six hundred into three hundred millimetre) complete in all respect including carriage of materials within all leads and lifts.

Providing and fixing 5 litre (five liters) capacity vitreous china automatic flushing cistern with a pair of C.I. or M.S. brackets complete with fittings including C.I. symphonic apparatus, mosquito proof lid, C.P. brass unions and coupling for connection with inlet, out let and over flow pipe including cutting holes and making good the same (over flow pipe to be measured and paid for separately) complete in all respect including carriage of materials within all leads and lifts.

Providing and fixing 15mm (fifteen millimetre) diameter CP stop cock including carriage of materials within all leads, lifts and other incidental charges complete in all respect.

Providing and fixing 15mm (fifteen millimetre) diametre C.P.brass bib tap heavy duty with capstan head including carriage of materials within all leads and lifts complete in all respect.

Providing and fixing 15mm (fifteen millimetre) diametre C.P. brass pillars tap heavy duty capstan head including carriage of materials within all leads and lifts complete in all respect.

Providing and fixing PVC connection pipe with brass unions 45cm (forty five centimeter) long 15mm (fifteen millimeter) nominal bore complete in all respect including carriage of materials within all leads and lifts.

Providing and fixing 32mm (thirty two millimetre) diametre CP brass waste heavy duty for wash basin or sink complete in all respect including carriage of materials within all leads and lifts.

Providing and fixing 75mm (seventy five millimeter) nominal diameter cast iron floor trap of self cleaning design with sand cast iron screwed down or hinged grating with or without vent arm complete including cost of cutting and making good in the walls and floors complete in all respect including carriage of materials within all leads and lifts.

Providing and fixing 75mm (seventy five millimetre) diametre pipes on wall face PVC (D-Plast) rain water pipes of working pressure not less than 4.5kg/sqm (four point five kilogram per square metre) including filling the joints with approved adhesive complete including carriage of materials within all leads, lifts and other incidental charges.

Providing and fixing PVC Plain bend 110mm (one hundred ten millimetre) diametres ISI marked including fixing with approved adhesive etcetra complete in all respect including carriage of material with in all leads, lifts and other incidentals.

Providing and fixing PVC Plain bend 75mm (seventy five millimetre) diametres ISI marked including fixing with approved adhesive etcetra complete in all respect including carriage of material with in all leads, lifts and other incidentals.

Providing and fixing 100mm (one hundred millimetre) sand cast iron grating for gully, floor or nahni trap complete in all respect including carriage of materials within all leads and lifts.

Providing and fixing 600x450mm (six hundred into four hundred fifty millimetre) bavelled edge mirror of superior glass mounted on 6mm (six millimetre) thick AC sheet or ply wood sheet and fixed to wooden plugs with CP brass screws and washers complete in all respect including carriage of materials within all leads and lifts.

Providing and fixing 600 x 20mm (six hundred into twenty millimetre) CP brass towel rail complete with CP Brass brackets fixed to wooden plugs with CP brass including carriage of materials within all leads and lifts complete in all respect.

Providing and fixing choromium plated brass soap dish with CP brass brackets fixed to wooden cleats with CP brass screws complete in all respect including carriage of materials within all leads and lifts.

Providing and fixing 15mm (fifteen millimeter) nominal bore to wall, ceiling and floor galvanized mild steel tubes (medium grade) tube fitting and clamps including making good the walls, ceiling and floor complete in all respect including carriage of materials within all leads and lifts complete in all respect.

Providing and fixing 15 mm (fifteen millimetre) diametre galvanised iron elbows for fitting complete in all respect including carriage of material within all leads and lifts complete in all respect.

Providing and fixing 15 mm (fifteen millimetre) diametre galvanised iron Tees equal for fitting complete in all respect including carriage of material within all leads and lifts complete in all respect.

Providing and fixing 15 mm (fifteen millimetre) diametre galvanised iron sockets for fitting complete in all respect including carriage of material within all leads and lifts complete in all respect.

Providing and fixing 15 mm (fifteen millimetre) diametre galvanised iron unions for fitting complete in all respect including carriage of material within all leads and lifts complete in all respect.

Providing and fixing 15mm (fifteen millimeter) nominal bore brass full way valve with wheel complete in all respect including carriage of materials within all leads and lifts.

Providing and fixing PVC 1000 ltr. (one thousand litre) water storage tank of ISI : 12701 marked, G.I. inlet and outlet connection, 15 mm nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting upto all height above ground level including carriage of material with in all leads, lifts and other incidentals.

Prithi Raj Thakur