Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹7.2 LAccepted-AOC ERATTUPETTA BLOCK PANCHAYATH KERALA | IDUKKI | KERALA | 685501 | 1 | Accepted-AOC LOWEST QUOTED | |
| 2 | Rejected-Technical | - | Rejected-Technical Highest rate |
Tender Value
₹8.5 L
EMD Value
₹21,361
Closing Date
15 Oct 2022, 3:00 pmClosed
Asst.Engineer LSGD Sub Division Idukki
LSGD Sub Division Idukki Thadiyampadu P.O
WSS
2022_LSGD_513558_2
02/21-22/IDK
Open Tender
Civil Works - Water Works
Item Rate
120 days
Idukki Block
Please refer Tender documents.
7 documents required · 7 mandatory
₹1,888
₹21,361
17 Nov 2022
7 Oct 2022
18 Oct 2022
7 Oct 2022
15 Oct 2022
7 Oct 2022
Amount
Water Supply Scheme
2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil
15.3:Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of Engineer -in-Charge.
60.7.1:DRY RUBBLE MASONRY _ Dry rubble without concrete levelling course masonry with good quality blasted rubble including packing to compactness to lines and levels cost and conveyance of all materials labour charges etc. complete as per direction of Departmental officers at site
OD39158/2022-2023:Random rubble masonry without concrete leveling course with best quality blasted rubble in cement mortar 1:8,
50.6.2.2:Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete
OD56448/2022-2023:Supplying and fixing factory molded RCC ventilator frame in a size of 90 x 45 CM or nearest available size
OD56449/2022-2023:Supplying and fixing precast factory molded RCC door frame in a size of 90 x 210 CM or nearest available size
50.12.3.1:Providing asbestos corrugated sheets roofing up to any pitch and fixing with polymer coated J,or L hooks, bolts and nuts 8 mm dia. G.I plain and bitumen washers or with self drilling fastener and EPDM washers etc. complete (excluding the cost of purlins, rafters and trusses), including cutting sheets to size and shape wherever required.
4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)
13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer
13.9.1:Cement plaster 1:3 ( 1 cement : 3 coarse sand) finished with a floating coat of neat cement.12 mm cement plaster
9.118.2:Providing and fixing to existing door frames30 mm thick factory made Polyvinyl Chloride (PVC) door shutter made of styles and rails of a uPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), with inbuilt decorative moulding edging on one side. The styles and rails mitred and joint at the corners by means of M.S. galvanised/plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 25x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x30 mm and 2 mm (± 0.2 mm) wall thickness fixed to the shutter styles by means of plastic/galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in-charge.
50.2.3.1:Pumping or Bailing out water and removing slush etc by using pump set including cost of labour, oil hire charges of pumpset, etc complete
OD55292/2022-2023:Providing and fixing HDPE pipe, including all fittings, testing of joints etc. complete as per direction of engineer in charge 63 mm dia. (2'') PN 10
OD55293/2022-2023:Providing and fixing HDPE pipe, including all fittings, testing of joints etc. complete as per direction of engineer in charge 50 mm dia. (1.5'') PN 10
18.17.4:Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :50 mm nominal bore
OD56450/2022-2023:Aquatex Sub Pump 5 HP VTO37SR1-20
OD56455/2022-2023:Providing and fixing good quality granite name board with lettering, including all cost, conveyance, labor charges etc.
EDATTU CONSTRUCTIONS
Bidder Name
EDATTU CONSTRUCTIONS
Anish Kumar K.S.
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_736148.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .