REPAIRS RE-SURFACING OF ROADS AND ROAD FURNITURE UNDER AGE BR I OF GE NB VISAKHAPATNAM

Amount

M & L for Premixed Bituminous Macadam laid / rolled and compacted to required gradient and camber [consolidate thickness 75mm or less] using paving bitumen of Grade VG - 30 as binder with 4% by weight of total mix using Hot Mix Plant and Mechanical Paver, rolled and compacted with power road roller of 8 to 12 ton capacity to required camber and gradient complete all as specified and as directed.

M & L for Preparing surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all dirt etc. and applying evenly a priming / tack coat with bituminous primer at 5 KG per 10 Sq.m of paving bitumen of grade VG - 30 complete all as specified and as directed.

M & L for laying Bituminous Premixed Semi Dense Asphaltic Concrete, 40 mm consolidated thickness, using paving bitumen of Grade VG – 30, with 5.5% of binder content by weight of total mix using Hot Mix Plant and Mechanical Paver, rolled and compacted with power road roller of 8 to 12 ton capacity to required camber and gradient complete all as specified. Note: Minimum Bitumen content shall be 5.5% as specified here in above. Please note that if the actual quantity of bitumen to be incorporated on approval of Mix–Design is found more than the minimum bitumen content specified above, No price adjustment shall be made for actual bitumen content of Mix–Design. Bitumen shall be Paving Bitumen of Grade VG–30 and shall be procured by the contractor.

M & L for repair to Pot Holes exceeding 30 mm depth, not exceeding 1.00 Sq.m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths etc, cutting around edges to at least 25mm depth, making good by applying tack coat with bituminous primer at 5 Kg per 10 Sq.m, putting in bituminous Premixed Asphaltic Semi Dense Concrete and again well rammed with power road roller of 8 to 12 ton capacity and consolidated including supply of premixed macadam, binder and chipping complete all as specified and as directed.

M & L for Road Marking Strips, Lines, Dashes, Arrows, Letters etc of 2.5 mm thick [Reflective Type] of colour White or Golden Yellow on roads, pavements and the like exceeding 10cm wide with Hot Thermo Plast material by fully automatic thermoplastic paint applicator machine, fitted with profile shoe, glass beads dispenser, propane tank heaters and profile shoe heater, driven by skilled operator on road surface complete as per MOSRT & H specifications including cleaning the road surface of all dirt, scales, oil grease and foreign materials etc complete all as specified and as directed.

S & F in repairs Road Stud, Two way reflective of size 101.6mm X 88.9mm X 20 mm [Approximately], ABS body with retro reflective panel of Amber, Red or White colour complete all as specified and as directed.

S & F in repairs Median Marker / Guard Rail Reflectors and conforming to IRC - 67 with metal base of size 114 X 117 mm with highly reflective reflectors made of PMMA Material with ABS Round Body fixed with Bolts, Nuts and Epoxy Glue on the side of crash barrier for perfectly delineating the road direction for night driving complete all as specified and as directed.

S & F in repairs Road Side Delineator [Reflector] as per approved model and conforming to IRC - 67, made of Powder Coated MS Pipe, 50mm bore, 1000mm height, Heavy Grade, fitted with 2 Nos. of 100mm dia highly reflective reflectors made of PMMA Material with ABS Round Body, anti rust & anti theft steel net, fixed with Bolts, Nuts and Epoxy Glue, which emit excellent reflection during night time, with 3 reflective strips of colour Amber, Red or White, as approved by GE and duly embedded in PCC 1:2:4, Type B1 of suitable size fixing MS Post and earthwork etc. complete all as specified and as directed.

S & F in repairs Road Side Flexible Delineator [Reflector] as per approved model and conforming to IRC - 67, made of highly flexible material [restores back to their erect posture even after being hit by a speeding vehicle without damaging them], fitted with 100mm PMMA reflector, which emit excellent reflection during night time, overall height of the reflector shall be of 1300mm with 3 reflective strips of colour Amber, Red or White, as approved by GE with 200mm dia base, 75mm dia pole, fixed with Bolts, Nuts and Epoxy Glue complete all as specified and as directed.

S & F in repairs Solar Road Studs [Bi-Directional] made of Aluminium Die cast matt finish of size 125 X 125 X 25mm [Approximately], working on High Efficiency Mono-Crystalline Solar Panel 2.4 V / 0.3 Watt, One Ni-Mh or NI-cd Rechargeable Battery [1.2V / 1600 MA] with Six Super Bright LEDs with 10,000 to 18,000 mcd [Millicandela], with a minimum Operating time of 3-4 consecutive days with full charge, viewing distance / visibility not less than 800m with 2 Hz Flash Rate, Self operated from Dusk to Dawn, anti twist ribs on the bottom anchor / shank with high intensity reflective grade polymer sticker and conforming to IS - 12063, of Colour yellow or red or blue or green or white as approved by GE complete all as specified and as directed.

S & F in repairs Speed Bumps / Speed Breakers conforming to IRC - 67 of size 500 X 365 mm, 50 mm high the material shall be Black/Yellow coloured and UV stabilised to keep perpetually colourful, Studded with reflectors on either side for clear visibility during night hours, fixed with nails supplied with the Bumps, grouting the holes with appropriate epoxy adhesive on the road surface and Bumps and filled with cement mortar inside the hollow area complete all as specified and as directed.

S & F in repairs Poly Carbonate Convex Mirror outdoor type 800mm dia made out of fibre along with bracket, Pole mounted and fixed to 80mm bore Medium Grade MS Pipe of required length complete and embedded in PCC 1:3:6, Type C1, including necessary earth work required for post holes complete all as specified.

Excavation in trenches not exceeding 1.5m wide and not exceeding 10 Sq.m on plan area and not exceeding 1.5m deep in Soft / Loose soil complete all as specified and as directed.

Removal of excavated material [Soil] to a distance exceeding 10 Km but not exceeding 15 Km and depositing where directed complete all as specified and as directed.

M & L for providing Precast Cement Concrete Kerb Stones, Dividers with or without chamfered angles and flat, splayed, rounded or mitred tops Type, B1, 1:2:4, using 20mm Graded Aggregate, including all mouldings, set in Cement Mortar 1:4 including dismantling/ demolition of existing cement concrete kerbs, dividers, etc. of any description and removal of debris to a distance exceeding 10 Km but not exceeding 15 Km and depositing where directed complete all as specified and as directed.

M & L for Moorum / Red Bajri filling under Floors or in Pavings laid in layers not exceeding 15 cm thick, spread levelled and rammed / rolled including watering to required level and gradient complete all as specified and as directed. Note: Measurements shall be taken after consolidation of earth and 10% deduction shall be made for payments.

ADITYA CONSTRUCTIONS

RAJASHEKHAR ENTERPRISES

RAGHU RAMA PANDA

D P R ASSOCIATES

Ram Sai Projects

CHAMUNDESWARI ENTERPRISES